Energy consumption oddity on a Mac-Mini
Hello,
Trying to make Linux consume as little(or less) power as OS X does on this Mac mini (as measured by watt meter that sits between the box and the power outlet) led me to the following sequence of commands:
[..start script..]
#!/bin/sh
set -e
test "$(id -u)" != "0" && exec sudo "$0" "$@"
echo powersave >/sys/module/pcie_aspm/parameters/policy
echo 1 >/sys/module/snd_hda_intel/parameters/power_save
echo min_power >/sys/class/scsi_host/host0/link_power_management_policy echo 1 | tee >/dev/null /sys/bus/usb/devices/*/power/autosuspend echo auto | tee >/dev/null /sys/devices/**/power/control
# Suspend to RAM only to restore in six seconds
# for some reason this step is essential here: # product: Macmini7,1 (System SKU#) # vendor: Apple Inc. # version: 1.0
echo +6 >/sys/class/rtc/rtc0/wakealarm
echo mem >/sys/power/state
echo 0 >/sys/class/rtc/rtc0/wakealarm
[..end script..]
Last 3 lines are the source of my confusion, why is this needed? The situation is as follows:
* after boot the system consumes 8-9 watts
* with powertop(8) inspired sysfs tweaks but without the suspension 6-7
* with the suspend oscillating around 5-6
Would be nice to really know what's going on here. (My Linux-power-fu is not too great)
Signature · 1 line
mailto:[email protected]
Quoted 6 lines · [email protected] writes:
Hello,
Trying to make Linux consume as little(or less) power as OS X does on this Mac mini (as measured by watt meter that sits between the box and the power outlet) led me to the following sequence of commands:
Here's a better one, the one that is actually beging used at this very moment and that almost halves the Linux's power glut (on this particular box, might be applicable to MBPros with i915 (then again might not)).
#!/bin/sh
set -e
test "$(id -u)" != "0" && exec sudo ${DISPLAY:+-A} "$0" "$@" printf '\033[?17;0;0c\n' | tee >/dev/null $(seq -f '/dev/tty%g' 1 7) echo 'powersave' >/sys/module/pcie_aspm/parameters/policy echo '6000' >/proc/sys/vm/dirty_writeback_centisecs
echo '1' >/sys/module/snd_hda_intel/parameters/power_save echo 'min_power' >/sys/class/scsi_host/host0/link_power_management_policy cpupower frequency-set --governor powersave x86_energy_perf_policy powersave
echo '0' >/proc/sys/kernel/nmi_watchdog
echo '1' | tee >/dev/null /sys/bus/usb/devices/*/power/autosuspend echo 'auto' | tee >/dev/null /sys/devices/**/power/control for f in $(find /sys/devices -name product -type f); do
expr "$(cat $f)" : "USB.*\(Keyboard\|Mouse\)" >/dev/null && {
echo '0' >$(dirname $f)/power/autosuspend
} || truedone
# Mysterious part starts here
echo '+6' >/sys/class/rtc/rtc0/wakealarm
echo 'mem' >/sys/power/state
echo '-1' >/sys/class/rtc/rtc0/wakealarm
[..snip..]
Signature · 1 line
mailto:[email protected]