Skip to contentSkip to conversation

virtio_pci: fix capability format, comments

PATCH In review Michael S. Tsirkin 2 participants 2 messages May 28, 2013 – May 30, 2013

Subsystems (2)
lore
Share & tools
lore

Michael S. Tsirkin

author maintainer
#0 lore raw

PATCH 1/1 virtio_pci: fix capability format, comments

- queue size can actually be 0 which is not a power of 2
- fix capability format. PCI spec says:
The layout of the information is vendor specific, except that the byte immediately following the “Next” pointer in the capability structure is defined to be a length field.
This length field provides the number of bytes in the capability structure (including the ID and Next pointer bytes).

---

This patch is on top of the new layout branch, too

 include/uapi/linux/virtio_pci.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/uapi/linux/virtio_pci.h +2 -1
index cda688f..a5ef8cd 100644
@@ -129,6 +129,7 @@
 struct virtio_pci_cap {
 	__u8 cap_vndr;	/* Generic PCI field: PCI_CAP_ID_VNDR */
 	__u8 cap_next;	/* Generic PCI field: next ptr. */
+	__u8 cap_len;	/* Generic PCI field: capability length */
 	__u8 cfg_type;	/* One of the VIRTIO_PCI_CAP_*_CFG. */
 	__u8 bar;		/* Where to find it. */
 	__le32 offset;	/* Offset within bar. */
@@ -154,7 +155,7 @@ struct virtio_pci_common_cfg {
 
 	/* About a specific virtqueue. */
 	__le16 queue_select;		/* read-write */
-	__le16 queue_size;		/* read-write, power of 2. */
+	__le16 queue_size;		/* read-write, power of 2, or 0. */
 	__le16 queue_msix_vector;	/* read-write */
 	__le16 queue_enable;		/* read-write */
 	__le16 queue_notify_off;	/* read-only */
Signature · 1 line
MST
#1 lore raw
Quoted 1 line · Michael S. Tsirkin

- queue size can actually be 0 which is not a power of 2

Actually, that points to a flaw in the code. When we shut down the queue, we should ideally reset it to what the device started with, rather than 0.

See below.

Quoted 6 lines

- fix capability format. PCI spec says:
The layout of the information is vendor specific, except that the byte immediately following the “Next” pointer in the capability structure is defined to be a length field.
This length field provides the number of bytes in the capability structure (including the ID and Next pointer bytes).

That part's definitely correct: applied.

Thanks,
Rusty.

Subjet: virtio_pci: save the desired ringsize.

MST points out that 0 isn't a power of 2. This means we can't re-open a virtio device once we write 0 into the queue length.

We should restore the amount the device originally asked for.

drivers/virtio/virtio_pci-common.h +3 -0
index ba1bf81..0e3143b 100644
@@ -82,6 +82,9 @@ struct virtio_pci_vq_info {
 
 	/* MSI-X vector (or none) */
 	unsigned msix_vector;
+
+	/* What size did the device *want* this to be? */
+	u16 desired_num;
 };
 
 /* the notify function used when creating a virt queue */
drivers/virtio/virtio_pci.c +2 -1
index 0f0e3a6..8b35c2e 100644
@@ -230,6 +230,7 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev,
 		return ERR_PTR(-ENOMEM);
 
 	info->msix_vector = msix_vec;
+	info->desired_num = num;
 
 	/* get offset of notification word for this vq (shouldn't wrap) */
 	off = ioread16(&vp_dev->common->queue_notify_off);
@@ -350,7 +351,7 @@ static void del_vq(struct virtqueue *vq)
 	vring_del_virtqueue(vq);
 
 	/* This is for our own benefit, not the device's! */
-	iowrite16(0, &vp_dev->common->queue_size);
+	iowrite16(info->desired_num, &vp_dev->common->queue_size);
 	iowrite64_twopart(0, &vp_dev->common->queue_desc);
 	iowrite64_twopart(0, &vp_dev->common->queue_avail);
 	iowrite64_twopart(0, &vp_dev->common->queue_used);

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization