Skip to contentSkip to conversation

drm/i915: move audio component intialization before audio driver use it

PATCH Superseded Yang 5 participants 20 messages Mar 29, 2018 – Apr 27, 2018 1 message not in the archive

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Yang

author
#0 lore raw

PATCH 1/1 drm/i915: move audio component intialization before audio driver use it

From: Yang Shi <[email protected]>

snd_hdac driver would use the component interface from i915 driver. if i915 driver do the audio component intialization too late, snd_hdac driver will meet ipanic.

---
 drivers/gpu/drm/i915/i915_drv.c      | 2 --
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -2
index 2f5209d..9d25d7e 100644
@@ -1243,8 +1243,6 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	if (IS_GEN5(dev_priv))
 		intel_gpu_ips_init(dev_priv);
 
-	intel_audio_init(dev_priv);
-
 	/*
 	 * Some ports require correctly set-up hpd registers for detection to
 	 * work properly (leading to ghost connected connector status), e.g. VGA
drivers/gpu/drm/i915/intel_display.c +2 -0
index f288bcc..a471c88 100644
@@ -14468,6 +14468,8 @@ int intel_modeset_init(struct drm_device *dev)
 
 	dev->mode_config.funcs = &intel_mode_funcs;
 
+	intel_audio_init(dev_priv);
+
 	init_llist_head(&dev_priv->atomic_helper.free_list);
 	INIT_WORK(&dev_priv->atomic_helper.free_work,
 		  intel_atomic_helper_free_state_worker);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✗ Fi.CI.CHECKPATCH: warning for series starting with [1/1] drm/i915: move audio component intialization before audio driver use it

== Series Details ==

== Series Details ==

Series: series starting with [1/1] drm/i915: move audio component intialization before audio driver use it
URL : https://patchwork.freedesktop.org/series/40858/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
f402e6914a54 drm/i915: move audio component intialization before audio driver use it
-:4: WARNING:TYPO_SPELLING: 'intialization' may be misspelled - perhaps 'initialization'?
#4: 
Subject: [PATCH] drm/i915: move audio component intialization before audio

-:8: WARNING:TYPO_SPELLING: 'intialization' may be misspelled - perhaps 'initialization'? #8:
if i915 driver do the audio component intialization too late, snd_hdac

total: 0 errors, 2 warnings, 0 checks, 16 lines checked

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

✓ Fi.CI.BAT: success for series starting with [1/1] drm/i915: move audio component intialization before audio driver use it

In reply to Yang
== Series Details ==

== Series Details ==

Series: series starting with [1/1] drm/i915: move audio component intialization before audio driver use it
URL : https://patchwork.freedesktop.org/series/40858/
State : success

== Summary ==

Series 40858v1 series starting with [1/1] drm/i915: move audio component intialization before audio driver use it
https://patchwork.freedesktop.org/api/1.0/series/40858/revisions/1/mbox/

---- Known issues:

Test kms_flip:

        Subgroup basic-flip-vs-wf_vblank:
                fail       -> PASS       (fi-cfl-s3) fdo#100368
Test kms_pipe_crc_basic:
        Subgroup nonblocking-crc-pipe-a-frame-sequence:
                fail       -> PASS       (fi-cfl-s3) fdo#103481 +1
        Subgroup suspend-read-crc-pipe-c:
                pass       -> INCOMPLETE (fi-bxt-dsi) fdo#103927

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103481 https://bugs.freedesktop.org/show_bug.cgi?id=103481
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:429s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:385s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:536s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:296s
fi-bxt-dsi       total:243  pass:216  dwarn:0   dfail:0   fail:0   skip:26 
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:515s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:517s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:510s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:410s
fi-cfl-s3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:561s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:516s
fi-cnl-y3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:591s
fi-elk-e7500     total:285  pass:225  dwarn:1   dfail:0   fail:0   skip:59  time:425s
fi-gdg-551       total:285  pass:176  dwarn:0   dfail:0   fail:1   skip:108 time:317s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:542s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:404s
fi-ilk-650       total:285  pass:225  dwarn:0   dfail:0   fail:0   skip:60  time:421s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:471s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:433s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:474s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:461s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:508s
fi-pnv-d510      total:285  pass:219  dwarn:1   dfail:0   fail:0   skip:65  time:662s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:445s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:532s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:506s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:489s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:428s
fi-skl-gvtdvm    total:285  pass:262  dwarn:0   dfail:0   fail:0   skip:23  time:447s
fi-snb-2520m     total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:555s
fi-snb-2600      total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:398s
Blacklisted hosts:
fi-cnl-psr       total:285  pass:255  dwarn:4   dfail:0   fail:0   skip:26  time:511s
fi-glk-j4005     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:484s

4668e88d66074a81aae645e0db0391e7ea9afe8a drm-tip: 2018y-03m-28d-20h-45m-29s UTC integration manifest f402e6914a54 drm/i915: move audio component intialization before audio driver use it

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8528/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

✓ Fi.CI.IGT: success for series starting with [1/1] drm/i915: move audio component intialization before audio driver use it

In reply to Yang
== Series Details ==

== Series Details ==

Series: series starting with [1/1] drm/i915: move audio component intialization before audio driver use it
URL : https://patchwork.freedesktop.org/series/40858/
State : success

== Summary ==

---- Known issues:

Test kms_cursor_crc:

        Subgroup cursor-64x64-suspend:
                incomplete -> PASS       (shard-hsw) fdo#103540
Test kms_flip:
        Subgroup 2x-flip-vs-expired-vblank:
                fail       -> PASS       (shard-hsw) fdo#102887
        Subgroup plain-flip-ts-check:
                fail       -> PASS       (shard-hsw) fdo#100368
Test kms_rotation_crc:
        Subgroup sprite-rotation-180:
                pass       -> FAIL       (shard-snb) fdo#103925
Test kms_vblank:
        Subgroup pipe-a-accuracy-idle:
                fail       -> PASS       (shard-hsw) fdo#102583

fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#102583 https://bugs.freedesktop.org/show_bug.cgi?id=102583

shard-apl        total:3495 pass:1831 dwarn:1   dfail:0   fail:7   skip:1655 time:12847s
shard-hsw        total:3495 pass:1782 dwarn:1   dfail:0   fail:2   skip:1709 time:11560s
shard-snb        total:3495 pass:1374 dwarn:1   dfail:0   fail:3   skip:2117 time:6936s

Blacklisted hosts:
shard-kbl total:3495 pass:1959 dwarn:1 dfail:0 fail:7 skip:1528 time:9189s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8528/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw
In reply to Yang

Quoting Yang (2018-03-29 08:12:13)

Quoted 31 lines

From: Yang Shi <[email protected]>

snd_hdac driver would use the component interface from i915 driver. if i915 driver do the audio component intialization too late, snd_hdac driver will meet ipanic.

---
 drivers/gpu/drm/i915/i915_drv.c      | 2 --
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -2
index 2f5209d..9d25d7e 100644
@@ -1243,8 +1243,6 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
        if (IS_GEN5(dev_priv))
                intel_gpu_ips_init(dev_priv);
 
-       intel_audio_init(dev_priv);
-
        /*
         * Some ports require correctly set-up hpd registers for detection to
         * work properly (leading to ghost connected connector status), e.g. VGA
drivers/gpu/drm/i915/intel_display.c +0 -0
index f288bcc..a471c88 100644

drivers/gpu/drm/i915/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 14471

Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1 -0
@@ -14468,6 +14468,8 @@ int intel_modeset_init(struct drm_device *dev)
 
        dev->mode_config.funcs = &intel_mode_funcs;
 
+       intel_audio_init(dev_priv);

Has info->num_pipes been finalized yet? Does the component framework expose the device to the external clients (if so, it can not be done before we are ready).
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#5 lore raw
Quoted 33 lines · Chris Wilson

Quoting Yang (2018-03-29 08:12:13)

Quoted 32 lines

From: Yang Shi <[email protected]>

snd_hdac driver would use the component interface from i915 driver. if i915 driver do the audio component intialization too late, snd_hdac driver will meet ipanic.

---
 drivers/gpu/drm/i915/i915_drv.c      | 2 --
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -2
index 2f5209d..9d25d7e 100644
@@ -1243,8 +1243,6 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
        if (IS_GEN5(dev_priv))
                intel_gpu_ips_init(dev_priv);
 
-       intel_audio_init(dev_priv);
-
        /*
         * Some ports require correctly set-up hpd registers for detection to
         * work properly (leading to ghost connected connector status), e.g. VGA
drivers/gpu/drm/i915/intel_display.c +0 -0
index f288bcc..a471c88 100644
@@ -14468,6 +14468,8 @@ int intel_modeset_init(struct drm_device *dev)
 
Quoted 7 lines

drivers/gpu/drm/i915/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 14471

Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +1 -0
        dev->mode_config.funcs = &intel_mode_funcs;
 
+       intel_audio_init(dev_priv);

Has info->num_pipes been finalized yet? Does the component framework expose the device to the external clients (if so, it can not be done before we are ready).

Hmmh, the same patch seems to have been sent twice. I replied at [1].

BR,
Jani.

[1] http://mid.mail-archive.com/[email protected]

Quoted 5 lines

-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
Quoted 54 lines

-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Thursday, March 29, 2018 9:16 PM
To: Chris Wilson <[email protected]>; Shi, Yang A <[email protected]>; [email protected]
Cc: Shi, Yang A <[email protected]>; He, Bo <[email protected]>
Subject: Re: [Intel-gfx] [PATCH 1/1] drm/i915: move audio component intialization before audio driver use it

Quoted 14 lines · Chris Wilson

Quoting Yang (2018-03-29 08:12:13)

Quoted 13 lines

From: Yang Shi <[email protected]>

snd_hdac driver would use the component interface from i915 driver. if i915 driver do the audio component intialization too late, snd_hdac driver will meet ipanic.

---
 drivers/gpu/drm/i915/i915_drv.c      | 2 --
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
Quoted 5 lines

drivers/gpu/drm/i915/i915_drv.c static void i915_driver_register(struct drm_i915_private

Quoted 5 lines
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_drv.c index 2f5209d..9d25d7e 100644

drivers/gpu/drm/i915/i915_drv.c +0 -0
@@ -1243,8 +1243,6 @@ static void i915_driver_register(struct drm_i915_private

*dev_priv)

Quoted 16 lines
Quoted 16 lines
drivers/gpu/drm/i915/i915_drv.c +0 -2
        if (IS_GEN5(dev_priv))
                intel_gpu_ips_init(dev_priv);
 
-       intel_audio_init(dev_priv);
-
        /*
         * Some ports require correctly set-up hpd registers for detection to
         * work properly (leading to ghost connected connector

status), e.g. VGA diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f288bcc..a471c88 100644

drivers/gpu/drm/i915/intel_display.c +0 -0
@@ -14468,6 +14468,8 @@ int intel_modeset_init(struct drm_device
 *dev)
 
Quoted 7 lines

drivers/gpu/drm/i915/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 14471

Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +1 -0
        dev->mode_config.funcs = &intel_mode_funcs;
 
+       intel_audio_init(dev_priv);

Has info->num_pipes been finalized yet? Does the component framework expose the device to the external clients (if so, it can not be done before we are ready).

Quoted 4 lines

Hmmh, the same patch seems to have been sent twice. I replied at [1].

BR,
Jani.

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep. Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

BR.
Yang.

Quoted 5 lines

[1] http://mid.mail-archive.com/[email protected]

Quoted 8 lines
Quoted 5 lines

-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#7 lore raw
Quoted 11 lines · Yang A

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep. Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

Quoted 3 lines

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

We do intel_audio_init() and register the audio component when we are ready to handle the audio component calls. We are ready at i915_driver_register(). We are not ready at intel_modeset_init().

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw
Quoted 25 lines

-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Tuesday, April 10, 2018 3:57 PM
To: Shi, Yang A <[email protected]>; Chris Wilson <[email protected]>; [email protected]
Cc: He, Bo <[email protected]>
Subject: RE: [Intel-gfx] [PATCH 1/1] drm/i915: move audio component intialization before audio driver use it

Quoted 11 lines · Yang A

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep. Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

Quoted 3 lines

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

Quoted 6 lines

We do intel_audio_init() and register the audio component when we are ready to handle the audio component calls. We are ready at i915_driver_register(). We are not ready at intel_modeset_init().

BR,
Jani.

Thanks to comments my patch.
After I check the whole driver code, I think all ops in i915_audio_component_ops should be ready at the beginning of function intel_modeset_init. So can we move intel_audio_init as early as we can.

Would you like to suggest a better place to do intel_audio_init?

Thanks.

BR.
Yang.

Quoted 4 lines

--
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#9 lore raw
Quoted 20 lines · Yang A
Quoted 20 lines · Yang A
Quoted 11 lines

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep. Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

Quoted 3 lines

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

We do intel_audio_init() and register the audio component when we are ready to handle the audio component calls. We are ready at i915_driver_register(). We are not ready at intel_modeset_init().

Quoted 8 lines
Quoted 2 lines

BR,
Jani.

Thanks to comments my patch.
After I check the whole driver code, I think all ops in i915_audio_component_ops should be ready at the beginning of function intel_modeset_init. So can we move intel_audio_init as early as we can.

No, that's not true. Just as an example, dev_priv->cdclk.hw.cdclk hasn't been initialized.

Quoted 1 line

Would you like to suggest a better place to do intel_audio_init?

I think the call is already where it is supposed to be. We expose ourselves to the rest of the system when we are ready. If it takes long, it takes long. I think you have a race in your driver, and you need to deal with it properly in your driver.

In snd_hdac_i915_init(), I don't think there are any guarantees that the request_module() call is the one actually probing i915. We might already be mid-probe. You don't even check or log request_module() return value.

I'm also not 100% sure at what point of driver loading request_module() returns. I think it's when the module init hook returns, which should be all right, but again, I don't think you can count on that if it isn't your request_module() that actually probes i915.

I think the patch at hand is a hack that reduces the window for the race, and not a real fix. Moreover, it makes the i915 audio component code fragile by introducing tricky probe order dependencies that we've been systematically trying to reduce by placing the call where it is now.

Cc Lucas for any further input on module probing.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#10 lore raw
Quoted 49 lines · Jani Nikula
Quoted 20 lines · Yang A
Quoted 20 lines · Yang A
Quoted 11 lines

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep. Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

Quoted 3 lines

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

We do intel_audio_init() and register the audio component when we are ready to handle the audio component calls. We are ready at i915_driver_register(). We are not ready at intel_modeset_init().

Quoted 8 lines
Quoted 2 lines

BR,
Jani.

Thanks to comments my patch.
After I check the whole driver code, I think all ops in i915_audio_component_ops should be ready at the beginning of function intel_modeset_init. So can we move intel_audio_init as early as we can.

No, that's not true. Just as an example, dev_priv->cdclk.hw.cdclk hasn't been initialized.

Quoted 1 line

Would you like to suggest a better place to do intel_audio_init?

I think the call is already where it is supposed to be. We expose ourselves to the rest of the system when we are ready. If it takes long, it takes long. I think you have a race in your driver, and you need to deal with it properly in your driver.

In snd_hdac_i915_init(), I don't think there are any guarantees that the request_module() call is the one actually probing i915. We might already be mid-probe. You don't even check or log request_module() return value.

I'm also not 100% sure at what point of driver loading request_module() returns. I think it's when the module init hook returns, which should be all right, but again, I don't think you can count on that if it isn't your request_module() that actually probes i915.

Quoted 7 lines

I think the patch at hand is a hack that reduces the window for the race, and not a real fix. Moreover, it makes the i915 audio component code fragile by introducing tricky probe order dependencies that we've been systematically trying to reduce by placing the call where it is now.

Cc Lucas for any further input on module probing.

Apparently there was also a bug in some version of kmod/modprobe which could have lead to what you're experiencing. Are you running the fixed version? See [1].

BR,
Jani.

[1] https://github.com/lucasdemarchi/kmod/commit/fd44a98ae2eb5eb32161088954ab21e58e19dfc4

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw
Quoted 9 lines · Jani Nikula
Quoted 8 lines · Jani Nikula
Quoted 7 lines · Yang A
Quoted 7 lines · Yang A
Quoted 6 lines

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep.

You should not really rely on "module is loaded, I can use it". It may not be bound to the device yet in case of async probe for example. You should rather wait for the service you want to use from the driver to be ready. See documentation of __request_module().

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

Humn... I fail to see how the usleep() would cause any of this. If the probe is synchronous (see below) we an eventual call to request_module() will/should wait for the first probe to finish nonetheless. To me it seems the error is elsewhere.

Quoted 23 lines
Quoted 23 lines
Quoted 9 lines
Quoted 9 lines
Quoted 4 lines

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

We do intel_audio_init() and register the audio component when we are ready to handle the audio component calls. We are ready at i915_driver_register(). We are not ready at intel_modeset_init().

Quoted 8 lines
Quoted 2 lines

BR,
Jani.

Thanks to comments my patch.
After I check the whole driver code, I think all ops in i915_audio_component_ops should be ready at the beginning of function intel_modeset_init. So can we move intel_audio_init as early as we can.

No, that's not true. Just as an example, dev_priv->cdclk.hw.cdclk hasn't been initialized.

Quoted 1 line

Would you like to suggest a better place to do intel_audio_init?

Quoted 7 lines
Quoted 7 lines

I think the call is already where it is supposed to be. We expose ourselves to the rest of the system when we are ready. If it takes long, it takes long. I think you have a race in your driver, and you need to deal with it properly in your driver.

In snd_hdac_i915_init(), I don't think there are any guarantees that the request_module() call is the one actually probing i915. We might already

This should not be relevant in this case. Even if the module is already mid-probe, request_module() will only return after modprobe returns (since request_module forces UMH_WAIT_PROC).

If a second call races with the first, it will try to find the module in the module list and end up waiting for it to complete. See add_unformed_module().

Quoted 1 line
Quoted 1 line

be mid-probe. You don't even check or log request_module() return value.

Checking the return value of request_module() is absolutely the first thing to do. It's plain broken otherwise... there are many reasons why a call to request_module() could fail. If your driver is being loaded from a work queue, if the modprobe binary is not where it should be, if there's a bug in modprobe, etc etc etc.

Quoted 5 lines
Quoted 5 lines

I'm also not 100% sure at what point of driver loading request_module() returns. I think it's when the module init hook returns, which should be all right, but again, I don't think you can count on that if it isn't your request_module() that actually probes i915.

You can, except if the pci probe is async... In this case modprobe would return before the rest of the initialization. I'm not totally sure about this without giving it a deeper look. But then, moving the call anywhere in that function should produce the same results with enough tries.

Quoted 7 lines
Quoted 7 lines

I think the patch at hand is a hack that reduces the window for the race, and not a real fix. Moreover, it makes the i915 audio component code fragile by introducing tricky probe order dependencies that we've been systematically trying to reduce by placing the call where it is now.

Quoted 5 lines
Quoted 1 line
Cc Lucas for any further input on module probing.

Apparently there was also a bug in some version of kmod/modprobe which could have lead to what you're experiencing. Are you running the fixed version? See [1].

Yep, this might explain as well. But only if i915 is builtin rather than a module. Is this the case here?

Lucas De Marchi

Quoted 10 lines

BR,
Jani.

[1] https://github.com/lucasdemarchi/kmod/commit/fd44a98ae2eb5eb32161088954ab21e58e19dfc4

Signature · 1 line
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

A message that is not in the archive (sent off-list or not yet received): E3ED5BF57CCD1C40876FA2D3385ED5D37B6183A4@SHSMSX101.ccr.corp.intel.com

maintainer
#13 lore raw
Quoted 8 lines · Yang A

This issue is not related to request_module. When issue happened, request_module get i915 Correctly and return 0 successfully. It just be caused by acomp->ops is null in function snd_hdac_i915_init after it called Component_master_add_with_match.

If intel_audio_init can be called before it check acomp->ops. Everything will goes well. But intel_audio_init is called too late because i915 driver go to usleep.

Please add drm.debug=14 module parameter, enable dev_dbg for your driver, and send us the dmesg.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw
Quoted 20 lines

-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Wednesday, April 11, 2018 8:25 PM
To: Shi, Yang A <[email protected]>; De Marchi, Lucas <[email protected]>
Cc: Chris Wilson <[email protected]>; [email protected]; He, Bo <[email protected]>; Deak, Imre <[email protected]>
Subject: RE: [Intel-gfx] [PATCH 1/1] drm/i915: move audio component intialization before audio driver use it

Quoted 8 lines · Yang A

This issue is not related to request_module. When issue happened, request_module get i915 Correctly and return 0 successfully. It just be caused by acomp->ops is null in function snd_hdac_i915_init after it called Component_master_add_with_match.

If intel_audio_init can be called before it check acomp->ops. Everything will goes well. But intel_audio_init is called too late because i915 driver go to usleep.

Quoted 5 lines

Please add drm.debug=14 module parameter, enable dev_dbg for your driver, and send us the dmesg.

BR,
Jani.

Dmesg is as following:
i915 driver load at about 0.214362. snd_soc_skl driver is loaded at about 0.853961. it meet error here.
Then i915 continue to do driver load.

[    0.214362] [drm:i915_driver_load] No PCH found.
[    0.214377] [drm:intel_power_domains_init] Allowed DC state mask 09
...
[    0.217374] [drm:i915_driver_load] ppgtt mode: 3
[    0.217377] [drm:i915_driver_load] use GPU semaphores? no
[    0.217381] [drm:i915_driver_load] preemption enabled? no
[    0.217409] [drm] Memory usable by graphics device = 4078M
[    0.217414] [drm:i915_ggtt_probe_hw] GMADR size = 256M
[    0.217418] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M
[    0.217453] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
[    0.217467] [drm:sanitize_rc6_option] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 4
[    0.217496] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7aedd000
[    0.217533] [drm:intel_opregion_setup] ASLE supported
[    0.217541] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA)
[    0.217630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.217633] [drm] Driver supports precise vblank timestamp query.
...
[    0.853961] snd_soc_skl 0000:00:0e.0: enabling device (0000 -> 0002)
[    0.859009] snd_soc_skl 0000:00:0e.0: failed to add i915 component master (-19)
[    0.888176] init: Starting service 'earlyaudioalsa'...
[    0.888471] init: write_file: Unable to open '/sys/kernel/debug/snd_soc_skl/nhlt/control': No such file or directory
[    0.902024] trusty trusty: trusty version: 14:57:13 Feb  7 2018
[    0.902043] trusty trusty: selected api version: 2 (requested 3)
[    0.904308] trusty-irq trusty-irq: irq from lk = 49
[    0.910886] trusty-virtio trusty-virtio: initializing
[    0.911177] trusty_ipc virtio0: vring0: va(pa)  ffff88007487a000(0) qsz 32 notifyid 1
[    0.911185] trusty_ipc virtio0: vring1: va(pa)  ffff880074894000(0) qsz 32 notifyid 2
[    0.911415] trusty-virtio trusty-virtio: initializing done
[    0.911695] trusty_ipc virtio0: is online
[    0.916608] trusty-wall trusty-wall: smwall: initialized 4096 bytes
[    0.919025] trusty-timer trusty-timer: initialized
[    0.929655] rpmb_sim rpmb_sim: registered RPMB capacity = 131072 of 512 blocks
[    0.930057] init: Service 'earlyaudioalsa' (pid 1925) exited with status 1
[    0.930405] init: Starting service 'logd'...
[    0.941825] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
[    0.950299] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
[    0.952397] logd.auditd: start
[    0.952416] logd.klogd: 910077775
[    0.958767] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
[    0.967223] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff

BR.
Yang.

Yang Shi, Intel Open Source Technology Center

Quoted 3 lines

--
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#15 lore raw
Quoted 1 line · Yang A

Dmesg is as following:

Full dmesg from boot please.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#16 lore raw
Quoted 10 lines

-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Thursday, April 12, 2018 4:06 PM
To: Shi, Yang A <[email protected]>; De Marchi, Lucas <[email protected]>
Cc: Chris Wilson <[email protected]>; [email protected]; He, Bo <[email protected]>; Deak, Imre <[email protected]>
Subject: RE: [Intel-gfx] [PATCH 1/1] drm/i915: move audio component intialization before audio driver use it

Quoted 4 lines
Quoted 1 line · Yang A

Dmesg is as following:

Full dmesg from boot please.

Done, I already send it directly to you.
Thanks.

BR.
Yang.

Quoted 7 lines

BR,
Jani.

--
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#17 lore raw
In reply to Jani Nikula
Quoted 33 lines

-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Tuesday, April 10, 2018 6:57 PM
To: Shi, Yang A <[email protected]>; Chris Wilson <[email protected]>; [email protected]
Cc: He, Bo <[email protected]>; De Marchi, Lucas <[email protected]>
Subject: RE: [Intel-gfx] [PATCH 1/1] drm/i915: move audio component intialization before audio driver use it

Quoted 23 lines · Yang A
Quoted 22 lines · Yang A
Quoted 11 lines

issue: snd_soc_skl meet "failed to add i915 component master (-19)" when platform don't connect any display output.

i915 do initialization before than skl_probe, but if there is no display output connect, in function drm_dp_dpcd_access, there is a 32 retry for aux i2c transactions. It will meet timeout and do usleep. Then skl_probe function will be scheduled. It will call snd_hdac_i915_init, and it will meet "failed to add i915 component master" error. And whole snd_soc_skl initialization will be failed, audio can't work normally anymore.

Quoted 3 lines

So i915 driver need to move intel_audio_init at the beginning of intel_modeset_init. This will make sure i915_audio_component_init process before snd_hdac_i915_init call it.

We do intel_audio_init() and register the audio component when we are ready to handle the audio component calls. We are ready at i915_driver_register(). We are not ready at intel_modeset_init().

BR,
Jani.

Quoted 7 lines
Quoted 5 lines

Thanks to comments my patch.
After I check the whole driver code, I think all ops in i915_audio_component_ops should be ready at the beginning of function intel_modeset_init. So can we move intel_audio_init as early as we can.

No, that's not true. Just as an example, dev_priv->cdclk.hw.cdclk hasn't been initialized.

i915_load_modeset_init->intel_power_domains_init_hw->bxt_display_core_init->bxt_init_cdclk dev_priv->cdclk.hw.cdclk will be initialized here.
It happened before driver enter into intel_modeset_init.
So it should be safe to be used from audio driver.

Quoted 7 lines
Quoted 2 lines

Would you like to suggest a better place to do intel_audio_init?

I think the call is already where it is supposed to be. We expose ourselves to the rest of the system when we are ready. If it takes long, it takes long. I think you have a race in your driver, and you need to deal with it properly in your driver.

No, display driver consume too much time to do initialization when it don't connect any display Output device.It influence whole audio driver and cause whole audio driver can't works well. This don't make sense.

Quoted 3 lines

In snd_hdac_i915_init(), I don't think there are any guarantees that the request_module() call is the one actually probing i915. We might already be mid-probe. You don't even check or log request_module() return value.

This is the issue in audio driver itself. Need be checked by audio driver owner.

BR.
Yang.

Yang Shi, Intel Open Source Technology Center

Quoted 10 lines

I'm also not 100% sure at what point of driver loading request_module() returns. I think it's when the module init hook returns, which should be all right, but again, I don't think you can count on that if it isn't your request_module() that actually probes i915.

I think the patch at hand is a hack that reduces the window for the race, and not a real fix. Moreover, it makes the i915 audio component code fragile by introducing tricky probe order dependencies that we've been systematically trying to reduce by placing the call where it is now.

Quoted 7 lines
Cc Lucas for any further input on module probing.

BR,
Jani.

--
Jani Nikula, Intel Open Source Technology Center

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#18 lore raw
Quoted 6 lines · Yang A
Quoted 2 lines

No, that's not true. Just as an example, dev_priv->cdclk.hw.cdclk hasn't been initialized.

i915_load_modeset_init->intel_power_domains_init_hw->bxt_display_core_init->bxt_init_cdclk dev_priv->cdclk.hw.cdclk will be initialized here.
It happened before driver enter into intel_modeset_init.
So it should be safe to be used from audio driver.

Was it easy to figure that out? Imagine double checking everything whenever a) intel_audio.c gets changed, or b) anything in our probe that might impact intel_audio.c gets changed. It's untenable. Our probe ordering is what it is to manage the complexity of the driver. When everything is done, we expose the driver to the rest of the system. Same with sysfs, debugfs, etc.

Quoted 11 lines
Quoted 7 lines
Quoted 1 line

Would you like to suggest a better place to do intel_audio_init?

I think the call is already where it is supposed to be. We expose ourselves to the rest of the system when we are ready. If it takes long, it takes long. I think you have a race in your driver, and you need to deal with it properly in your driver.

No, display driver consume too much time to do initialization when it don't connect any display Output device.It influence whole audio driver and cause whole audio driver can't works well. This don't make sense.

Our probe takes as long as it takes. It's a complicated driver with complicated probing to do. Why does your design require i915 to be probed as part of your probe? The component interface supports the master and client binding in any order, asynchronously.

If you have issues because of the timing, it's probably a race condition in your driver. Doing the audio init earlier on our side just papers over your race condition without actually fixing it.

If we were to optimize our probe, it would probably mean more parallelism and asynchronous probing, and that in turn means even stricter requirements for finding the root cause instead of just fiddling with the call site.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#19 lore raw
In reply to Chris Wilson
Quoted 43 lines

-----Original Message-----
From: Chris Wilson [mailto:[email protected]]
Sent: Thursday, March 29, 2018 7:56 PM
To: Shi, Yang A <[email protected]>; [email protected]
Cc: Shi, Yang A <[email protected]>; He, Bo <[email protected]>
Subject: Re: [Intel-gfx] [PATCH 1/1] drm/i915: move audio component intialization before audio driver use it

Quoting Yang (2018-03-29 08:12:13)

drivers/gpu/drm/i915/i915_drv.c static void i915_driver_register(struct drm_i915_private

Quoted 18 lines

From: Yang Shi <[email protected]>

snd_hdac driver would use the component interface from i915 driver. if i915 driver do the audio component intialization too late, snd_hdac driver will meet ipanic.

---
 drivers/gpu/drm/i915/i915_drv.c      | 2 --
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_drv.c index 2f5209d..9d25d7e 100644

drivers/gpu/drm/i915/i915_drv.c +0 -0
@@ -1243,8 +1243,6 @@ static void i915_driver_register(struct drm_i915_private

*dev_priv)

Quoted 15 lines
drivers/gpu/drm/i915/i915_drv.c +0 -2
        if (IS_GEN5(dev_priv))
                intel_gpu_ips_init(dev_priv);
 
-       intel_audio_init(dev_priv);
-
        /*
         * Some ports require correctly set-up hpd registers for detection to
         * work properly (leading to ghost connected connector

status), e.g. VGA diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f288bcc..a471c88 100644

drivers/gpu/drm/i915/intel_display.c +0 -0
@@ -14468,6 +14468,8 @@ int intel_modeset_init(struct drm_device *dev)
 
Quoted 7 lines

drivers/gpu/drm/i915/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 14471

Quoted 3 lines
drivers/gpu/drm/i915/intel_display.c +1 -0
        dev->mode_config.funcs = &intel_mode_funcs;
 
+       intel_audio_init(dev_priv);

Has info->num_pipes been finalized yet? Does the component framework expose the device to the external clients (if so, it can not be done before we are ready). -Chris

Yes, info->num_pipes is finalized yet. This audio component will be used in audio driver snd_hdac_i915_init.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#20 lore raw
In reply to Yang
Quoted 5 lines · Yang

From: Yang Shi <[email protected]>

snd_hdac driver would use the component interface from i915 driver. if i915 driver do the audio component intialization too late, snd_hdac driver will meet ipanic.

To follow-up, we figured out off-list that the root cause here were local async probe changes, and the issue that this patch addresses is not present upstream.

However, it seems likely that the patch [1] recently proposed by Chris would cause similar issues. Let's continue the discussion on that thread.

BR,
Jani.

[1] http://patchwork.freedesktop.org/patch/msgid/[email protected]

Quoted 34 lines
---
 drivers/gpu/drm/i915/i915_drv.c      | 2 --
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -2
index 2f5209d..9d25d7e 100644
@@ -1243,8 +1243,6 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	if (IS_GEN5(dev_priv))
 		intel_gpu_ips_init(dev_priv);
 
-	intel_audio_init(dev_priv);
-
 	/*
 	 * Some ports require correctly set-up hpd registers for detection to
 	 * work properly (leading to ghost connected connector status), e.g. VGA
drivers/gpu/drm/i915/intel_display.c +2 -0
index f288bcc..a471c88 100644
@@ -14468,6 +14468,8 @@ int intel_modeset_init(struct drm_device *dev)
 
 	dev->mode_config.funcs = &intel_mode_funcs;
 
+	intel_audio_init(dev_priv);
+
 	init_llist_head(&dev_priv->atomic_helper.free_list);
 	INIT_WORK(&dev_priv->atomic_helper.free_work,
 		  intel_atomic_helper_free_state_worker);
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx