package/ti-gfx: number and fix the new-clk-api patch
PATCH v2 1/1 package/ti-gfx: number and fix the new-clk-api patch
From: "Yann E. MORIN" <[email protected]>
Add a sequence number to the newclkapi patch.
Rebase it ontop of the 5.01.00.01 release.
Note: this is barely tested. It applies neatly, but I can't test it, since I do not have the hardware. I bumped the patch by basically renaming the problematic functions like the previous patch did:
s/clk_enable/clk_prepare_enable/ s/clk_disable/clk_disable_unprepare/
---
Changes v1 -> v2:
- actually renumber the patch
---
...newclkapi.patch => ti-gfx-0000-newclkapi.patch} | 83 ++++++++--------------
1 file changed, 29 insertions(+), 54 deletions(-)
rename package/ti-gfx/{ti-gfx-newclkapi.patch => ti-gfx-0000-newclkapi.patch} (57%)package/ti-gfx/ti-gfx-0000-newclkapi.patch renamed from package/ti-gfx/ti-gfx-newclkapi.patch +29 -54
@@ -2,15 +2,15 @@ This patch adjusts the omap3630 portion of the powervr driver to use the new clk kernel api. Signed-off-by: Spenser Gilliland <[email protected]> ----- -Index: ti-gfx-4_09_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c -=================================================================== ---- ti-gfx-4_09_00_01.orig/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c 2013-06-28 13:44:06.352701522 -0500 -+++ ti-gfx-4_09_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c 2013-06-28 13:45:12.364702727 -0500 -@@ -153,6 +153,49 @@ - psTimingInfo->ui32ActivePowManLatencyms = SYS_SGX_ACTIVE_POWER_LATENCY_MS; - } +[yann.morin.1998 at free.fr: rebased ontop of 5.01.00.01] +Signed-off-by: "Yann E. MORIN" <[email protected]> +diff -durN ti-gfx-5_01_00_01.orig/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c ti-gfx-5_01_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c +--- ti-gfx-5_01_00_01.orig/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c 2013-12-23 15:44:20.000000000 +0100 ++++ ti-gfx-5_01_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c 2014-02-26 19:17:39.829571846 +0100 +@@ -182,6 +182,49 @@ + @Return PVRSRV_ERROR + ******************************************************************************/ +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) +int clk_disable_unprepare(struct clk *clk) +{
@@ -57,50 +57,25 @@ Index: ti-gfx-4_09_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c PVRSRV_ERROR EnableSGXClocks(SYS_DATA *psSysData) { #if !defined(NO_HARDWARE) -@@ -167,19 +210,19 @@ - - PVR_DPF((PVR_DBG_MESSAGE, "EnableSGXClocks: Enabling SGX Clocks")); - -- res=clk_enable(psSysSpecData->psSGX_FCK); -+ res=clk_prepare_enable(psSysSpecData->psSGX_FCK); - if (res < 0) - { - PVR_DPF((PVR_DBG_ERROR, "EnableSGXClocks: Couldn't enable SGX functional clock (%d)", res)); - return PVRSRV_ERROR_UNABLE_TO_ENABLE_CLOCK; - } +@@ -198,7 +241,7 @@ -- res=clk_enable(psSysSpecData->psSGX_ICK); -+ res=clk_prepare_enable(psSysSpecData->psSGX_ICK); + #if !defined(PM_RUNTIME_SUPPORT) + PVR_DPF((PVR_DBG_MESSAGE, "EnableSGXClocks: Enabling SGX Clocks")); +- res=clk_enable(psSysSpecData->psSGX_FCK); ++ res=clk_prepare_enable(psSysSpecData->psSGX_FCK); if (res < 0) { - PVR_DPF((PVR_DBG_ERROR, "EnableSGXClocks: Couldn't enable SGX interface clock (%d)", res)); - -- clk_disable(psSysSpecData->psSGX_FCK); -+ clk_disable_unprepare(psSysSpecData->psSGX_FCK); - return PVRSRV_ERROR_UNABLE_TO_ENABLE_CLOCK; - } - -@@ -233,7 +276,6 @@ - return PVRSRV_OK; - } + PVR_DPF((PVR_DBG_ERROR, "EnableSGXClocks: Couldn't enable SGX functional clock (%d)", res)); +@@ -324,7 +367,7 @@ -- - IMG_VOID DisableSGXClocks(SYS_DATA *psSysData) - { - #if !defined(NO_HARDWARE) -@@ -246,9 +288,9 @@ - PVR_DPF((PVR_DBG_MESSAGE, "DisableSGXClocks: Disabling SGX Clocks")); - -- clk_disable(psSysSpecData->psSGX_FCK); -+ clk_disable_unprepare(psSysSpecData->psSGX_FCK); - -- clk_disable(psSysSpecData->psSGX_ICK); -+ clk_disable_unprepare(psSysSpecData->psSGX_ICK); - - // SysDisableSGXInterrupts(psSysData); + #if !defined(PM_RUNTIME_SUPPORT) +- clk_disable(psSysSpecData->psSGX_FCK); ++ clk_disable_unprepare(psSysSpecData->psSGX_FCK); + #endif + SysDisableSGXInterrupts(psSysData); -@@ -374,14 +416,14 @@ +@@ -540,14 +583,14 @@ rate = clk_get_rate(psSysSpecData->psGPT11_FCK); PVR_TRACE(("GPTIMER11 clock is %dMHz", HZ_TO_MHZ(rate)));
@@ -117,27 +92,27 @@ Index: ti-gfx-4_09_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c if (res < 0) { PVR_DPF((PVR_DBG_ERROR, "EnableSystemClocks: Couldn't enable GPTIMER11 interface clock (%d)", res)); -@@ -444,9 +486,9 @@ +@@ -610,9 +653,9 @@ ExitDisableGPT11ICK: - #if defined(PVR_OMAP3_TIMING_PRCM) + #if defined(PVR_OMAP4_TIMING_PRCM) - clk_disable(psSysSpecData->psGPT11_ICK); + clk_disable_unprepare(psSysSpecData->psGPT11_ICK); ExitDisableGPT11FCK: - clk_disable(psSysSpecData->psGPT11_FCK); + clk_disable_unprepare(psSysSpecData->psGPT11_FCK); ExitError: - #endif + #endif /* defined(PVR_OMAP4_TIMING_PRCM) */ eError = PVRSRV_ERROR_CLOCK_REQUEST_FAILED; -@@ -490,9 +532,9 @@ +@@ -664,9 +707,9 @@ + psSysSpecData->sTimerRegPhysBase.uiAddr = 0; #endif - - #if defined(PVR_OMAP3_TIMING_PRCM) + #if defined(PVR_OMAP4_TIMING_PRCM) - clk_disable(psSysSpecData->psGPT11_ICK); + clk_disable_unprepare(psSysSpecData->psGPT11_ICK); - clk_disable(psSysSpecData->psGPT11_FCK); + clk_disable_unprepare(psSysSpecData->psGPT11_FCK); - #endif + #endif /* defined(PVR_OMAP4_TIMING_PRCM) */ } - #endif + #endif /* PVR_OMAP_USE_DM_TIMER_API */
Signature · 1 line
1.8.3.2
PATCH v2 1/1 package/ti-gfx: number and fix the new-clk-api patch
Quoted 12 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Yann" == Yann E MORIN <[email protected]> writes:
From: "Yann E. MORIN" <[email protected]>
Add a sequence number to the newclkapi patch.
Rebase it ontop of the 5.01.00.01 release.Note: this is barely tested. It applies neatly, but I can't test it, since I do not have the hardware. I bumped the patch by basically renaming the problematic functions like the previous patch did:
s/clk_enable/clk_prepare_enable/ s/clk_disable/clk_disable_unprepare/
Quoted 5 lines
Signed-off-by "Yann E. MORIN" <[email protected]>Cc Spenser Gilliland <[email protected]>---
Changes v1 -> v2:
- actually renumber the patch
Committed to next, thanks.
Signature · 1 line
Bye, Peter Korsgaard