Skip to contentSkip to conversation

3.4.73-stable review

PATCH In review Greg Kroah-Hartman 4 participants 38 messages Dec 6, 2013 – Dec 8, 2013 Stable branch

lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 3.4.73-stable review

This is the start of the stable review cycle for the 3.4.73 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Dec 8 21:49:13 UTC 2013. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.73-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.4.73-rc1

Mikulas Patocka <[email protected]>
blk-core: Fix memory corruption if blkcg_init_queue fails

Mikulas Patocka <[email protected]>
dm: fix truncated status strings

Tomoki Sekiyama <[email protected]>

    elevator: acquire q->sysfs_lock in elevator_change()

Julian Stecklina <[email protected]>
iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits

Sasha Levin <[email protected]>
video: kyro: fix incorrect sizes when copying to userspace

Stanislav Kinsbursky <[email protected]>
nfsd: use "init_net" for portmapper

KOBAYASHI Yoshitake <[email protected]>
mmc: block: fix a bug of error handling in MMC driver

Kees Cook <[email protected]>
HID: picolcd_core: validate output report details

fan.du <[email protected]>
{pktgen, xfrm} Update IPv4 header total len and checksum after tranformation

Hannes Frederic Sowa <[email protected]>
ipv6: fix possible seqlock deadlock in ip6_finish_output2

Eric Dumazet <[email protected]>
inet: fix possible seqlock deadlocks

Shawn Landden <[email protected]>
net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST

Veaceslav Falico <[email protected]>
af_packet: block BH in prb_shutdown_retire_blk_timer()

Daniel Borkmann <[email protected]>
packet: fix use after free race in send path when dev is released

Ding Tianhong <[email protected]>
bridge: flush br's address entry in fdb when remove the bridge dev

Vlad Yasevich <[email protected]>
net: core: Always propagate flag changes to interfaces

Ying Xue <[email protected]>
atm: idt77252: fix dev refcnt leak

Hannes Frederic Sowa <[email protected]>
ipv6: fix leaking uninitialized port number of offender sockaddr

Dan Carpenter <[email protected]>

    net: clamp ->msg_namelen instead of returning an error

Hannes Frederic Sowa <[email protected]>

    inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions

Hannes Frederic Sowa <[email protected]>
net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)

Hannes Frederic Sowa <[email protected]>
net: rework recvmsg handler msg_name and msg_namelen logic

Hannes Frederic Sowa <[email protected]>
inet: prevent leakage of uninitialized memory to user in recv syscalls

Eric Dumazet <[email protected]>
ipv4: fix possible seqlock deadlock

Chris Metcalf <[email protected]>
connector: improved unaligned access error fix

Dan Carpenter <[email protected]>
isdnloop: use strlcpy() instead of strcpy()

Nikolay Aleksandrov <[email protected]>
bonding: fix two race conditions in bond_store_updelay/downdelay

Jukka Rissanen <[email protected]>
6lowpan: Uncompression of traffic class field was incorrect

Veaceslav Falico <[email protected]>
bonding: don't permit to use ARP monitoring in 802.3ad mode

Daniel Borkmann <[email protected]>
random32: fix off-by-one in seeding requirement

Duan Jiong <[email protected]>
ipv6: use rt6_get_dflt_router to get default router in rt6_route_rcv

Andreas Henriksson <[email protected]>
net: Fix "ip rule delete table 256"

-------------

Diffstat:

 Makefile                         |  4 +-
 block/blk-core.c                 |  4 +-
 block/elevator.c                 | 16 ++++++-
 crypto/algif_hash.c              |  5 ++-
 crypto/algif_skcipher.c          |  4 +-
 drivers/atm/idt77252.c           |  2 +-
 drivers/connector/cn_proc.c      | 66 ++++++++++++++++-----------
 drivers/hid/hid-picolcd.c        |  2 +-
 drivers/iommu/intel-iommu.c      |  6 ++-
 drivers/isdn/isdnloop/isdnloop.c |  8 ++--
 drivers/isdn/mISDN/socket.c      | 13 ++----
 drivers/md/dm-crypt.c            | 37 ++++------------
 drivers/md/dm-delay.c            |  6 +--
 drivers/md/dm-flakey.c           |  5 +--
 drivers/md/dm-ioctl.c            | 18 +++++---
 drivers/md/dm-linear.c           |  5 +--
 drivers/md/dm-mpath.c            |  6 +--
 drivers/md/dm-raid.c             |  6 +--
 drivers/md/dm-raid1.c            |  6 +--
 drivers/md/dm-snap.c             | 12 ++---
 drivers/md/dm-stripe.c           |  5 +--
 drivers/md/dm-thin.c             | 74 +++++++++++++++++++------------
 drivers/md/dm-verity.c           |  6 +--
 drivers/mmc/card/block.c         | 47 ++++++++++++++++++--
 drivers/net/bonding/bond_sysfs.c | 11 ++++-
 drivers/net/ppp/pppoe.c          |  2 -
 drivers/video/kyro/fbdev.c       |  6 +--
 fs/nfsd/nfssvc.c                 |  3 +-
 include/linux/device-mapper.h    |  4 +-
 include/linux/net.h              |  8 ++++
 include/linux/random.h           |  6 +--
 include/net/ip.h                 |  2 +-
 include/net/ipv6.h               |  6 ++-
 lib/random32.c                   | 14 +++---
 net/appletalk/ddp.c              | 16 +++----
 net/atm/common.c                 |  2 -
 net/ax25/af_ax25.c               |  4 +-
 net/bluetooth/af_bluetooth.c     |  4 --
 net/bluetooth/hci_sock.c         |  2 -
 net/bluetooth/rfcomm/sock.c      |  1 -
 net/bridge/br_if.c               |  2 +
 net/caif/caif_socket.c           |  4 --
 net/compat.c                     |  5 ++-
 net/core/dev.c                   |  2 +-
 net/core/fib_rules.c             |  3 +-
 net/core/iovec.c                 |  3 +-
 net/core/pktgen.c                |  7 +++
 net/ieee802154/6lowpan.c         |  4 +-
 net/ipv4/datagram.c              |  2 +-
 net/ipv4/ip_sockglue.c           |  3 +-
 net/ipv4/ping.c                  | 13 +++---
 net/ipv4/raw.c                   |  6 +--
 net/ipv4/tcp_ipv4.c              |  2 +-
 net/ipv4/udp.c                   | 14 +++---
 net/ipv6/datagram.c              |  8 +++-
 net/ipv6/ip6_output.c            |  4 +-
 net/ipv6/raw.c                   |  8 ++--
 net/ipv6/route.c                 |  7 ++-
 net/ipv6/udp.c                   |  9 ++--
 net/ipx/af_ipx.c                 |  3 +-
 net/irda/af_irda.c               |  4 --
 net/iucv/af_iucv.c               |  2 -
 net/key/af_key.c                 |  1 -
 net/l2tp/l2tp_ip.c               |  4 +-
 net/l2tp/l2tp_ppp.c              |  2 -
 net/llc/af_llc.c                 |  2 -
 net/netlink/af_netlink.c         |  2 -
 net/netrom/af_netrom.c           |  3 +-
 net/nfc/rawsock.c                |  2 -
 net/packet/af_packet.c           | 96 ++++++++++++++++++++++------------------
 net/phonet/datagram.c            |  9 ++--
 net/rds/recv.c                   |  2 -
 net/rose/af_rose.c               |  8 ++--
 net/rxrpc/ar-recvmsg.c           |  9 ++--
 net/socket.c                     | 24 +++++-----
 net/tipc/socket.c                |  6 ---
 net/unix/af_unix.c               |  5 ---
 net/x25/af_x25.c                 |  3 +-
 78 files changed, 399 insertions(+), 348 deletions(-)
author maintainer
#1 lore raw

PATCH 1/32 net: Fix "ip rule delete table 256"

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Henriksson <[email protected]>

[ Upstream commit 13eb2ab2d33c57ebddc57437a7d341995fc9138c ]

When trying to delete a table >= 256 using iproute2 the local table will be deleted.
The table id is specified as a netlink attribute when it needs more then 8 bits and iproute2 then sets the table field to RT_TABLE_UNSPEC (0). Preconditions to matching the table id in the rule delete code doesn't seem to take the "table id in netlink attribute" into condition so the frh_get_table helper function never gets to do its job when matching against current rule.
Use the helper function twice instead of peaking at the table value directly.

Originally reported at: http://bugs.debian.org/724783

---
 net/core/fib_rules.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/core/fib_rules.c +2 -1
@@ -443,7 +443,8 @@ static int fib_nl_delrule(struct sk_buff
 		if (frh->action && (frh->action != rule->action))
 			continue;
 
-		if (frh->table && (frh_get_table(frh, tb) != rule->table))
+		if (frh_get_table(frh, tb) &&
+		    (frh_get_table(frh, tb) != rule->table))
 			continue;
 
 		if (tb[FRA_PRIORITY] &&
author maintainer
#2 lore raw

PATCH 2/32 ipv6: use rt6_get_dflt_router to get default router in rt6_route_rcv

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Duan Jiong <[email protected]>

[ Upstream commit f104a567e673f382b09542a8dc3500aa689957b4 ]

As the rfc 4191 said, the Router Preference and Lifetime values in a ::/0 Route Information Option should override the preference and lifetime values in the Router Advertisement header. But when the kernel deals with a ::/0 Route Information Option, the rt6_get_route_info() always return NULL, that means that overriding will not happen, because those default routers were added without flag RTF_ROUTEINFO in rt6_add_dflt_router().

In order to deal with that condition, we should call rt6_get_dflt_router when the prefix length is 0.

---
 net/ipv6/route.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/ipv6/route.c +5 -2
@@ -617,8 +617,11 @@ int rt6_route_rcv(struct net_device *dev
 		prefix = &prefix_buf;
 	}
 
-	rt = rt6_get_route_info(net, prefix, rinfo->prefix_len, gwaddr,
-				dev->ifindex);
+	if (rinfo->prefix_len == 0)
+		rt = rt6_get_dflt_router(gwaddr, dev);
+	else
+		rt = rt6_get_route_info(net, prefix, rinfo->prefix_len,
+					gwaddr, dev->ifindex);
 
 	if (rt && !lifetime) {
 		ip6_del_rt(rt);
author maintainer
#3 lore raw

PATCH 3/32 random32: fix off-by-one in seeding requirement

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <[email protected]>

[ Upstream commit 51c37a70aaa3f95773af560e6db3073520513912 ]

For properly initialising the Tausworthe generator [1], we have a strict seeding requirement, that is, s1 > 1, s2 > 7, s3 > 15.

Commit 697f8d0348 ("random32: seeding improvement") introduced a __seed() function that imposes boundary checks proposed by the errata paper [2] to properly ensure above conditions.

However, we're off by one, as the function is implemented as:
"return (x < m) ? x + m : x;", and called with __seed(X, 1), __seed(X, 7), __seed(X, 15). Thus, an unwanted seed of 1, 7, 15 would be possible, whereas the lower boundary should actually be of at least 2, 8, 16, just as GSL does. Fix this, as otherwise an initialization with an unwanted seed could have the effect that Tausworthe's PRNG properties cannot not be ensured.

Note that this PRNG is *not* used for cryptography in the kernel.

[1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps
[2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps

Joint work with Hannes Frederic Sowa.

Fixes 697f8d0348a6 ("random32: seeding improvement")
Cc Stephen Hemminger <[email protected]>
Cc Florian Weimer <[email protected]>
Cc Theodore Ts'o <[email protected]>
---
 include/linux/random.h |    6 +++---
 lib/random32.c         |   14 +++++++-------
 2 files changed, 10 insertions(+), 10 deletions(-)
include/linux/random.h +3 -3
@@ -87,9 +87,9 @@ static inline void prandom32_seed(struct
 {
 	u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
 
-	state->s1 = __seed(i, 1);
-	state->s2 = __seed(i, 7);
-	state->s3 = __seed(i, 15);
+	state->s1 = __seed(i, 2);
+	state->s2 = __seed(i, 8);
+	state->s3 = __seed(i, 16);
 }
 
 #ifdef CONFIG_ARCH_RANDOM
lib/random32.c +7 -7
@@ -92,7 +92,7 @@ void srandom32(u32 entropy)
 	 */
 	for_each_possible_cpu (i) {
 		struct rnd_state *state = &per_cpu(net_rand_state, i);
-		state->s1 = __seed(state->s1 ^ entropy, 1);
+		state->s1 = __seed(state->s1 ^ entropy, 2);
 	}
 }
 EXPORT_SYMBOL(srandom32);
@@ -109,9 +109,9 @@ static int __init random32_init(void)
 		struct rnd_state *state = &per_cpu(net_rand_state,i);
 
 #define LCG(x)	((x) * 69069)	/* super-duper LCG */
-		state->s1 = __seed(LCG(i + jiffies), 1);
-		state->s2 = __seed(LCG(state->s1), 7);
-		state->s3 = __seed(LCG(state->s2), 15);
+		state->s1 = __seed(LCG(i + jiffies), 2);
+		state->s2 = __seed(LCG(state->s1), 8);
+		state->s3 = __seed(LCG(state->s2), 16);
 
 		/* "warm it up" */
 		prandom32(state);
@@ -138,9 +138,9 @@ static int __init random32_reseed(void)
 		u32 seeds[3];
 
 		get_random_bytes(&seeds, sizeof(seeds));
-		state->s1 = __seed(seeds[0], 1);
-		state->s2 = __seed(seeds[1], 7);
-		state->s3 = __seed(seeds[2], 15);
+		state->s1 = __seed(seeds[0], 2);
+		state->s2 = __seed(seeds[1], 8);
+		state->s3 = __seed(seeds[2], 16);
 
 		/* mix it in */
 		prandom32(state);
author maintainer
#4 lore raw

PATCH 4/32 bonding: dont permit to use ARP monitoring in 802.3ad mode

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Veaceslav Falico <[email protected]>

[ Upstream commit ec9f1d15db8185f63a2c3143dc1e90ba18541b08 ]

Currently the ARP monitoring is not supported with 802.3ad, and it's prohibited to use it via the module params.

However we still can set it afterwards via sysfs, cause we only check for *LB modes there.

To fix this - add a check for 802.3ad mode in bonding_store_arp_interval.

---
 drivers/net/bonding/bond_sysfs.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/bonding/bond_sysfs.c +3 -2
@@ -533,8 +533,9 @@ static ssize_t bonding_store_arp_interva
 		goto out;
 	}
 	if (bond->params.mode == BOND_MODE_ALB ||
-	    bond->params.mode == BOND_MODE_TLB) {
-		pr_info("%s: ARP monitoring cannot be used with ALB/TLB. Only MII monitoring is supported on %s.\n",
+	    bond->params.mode == BOND_MODE_TLB ||
+	    bond->params.mode == BOND_MODE_8023AD) {
+		pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n",
 			bond->dev->name, bond->dev->name);
 		ret = -EINVAL;
 		goto out;
author maintainer
#5 lore raw

PATCH 5/32 6lowpan: Uncompression of traffic class field was incorrect

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jukka Rissanen <[email protected]>

[ Upstream commit 1188f05497e7bd2f2614b99c54adfbe7413d5749 ]

If priority/traffic class field in IPv6 header is set (seen when using ssh), the uncompression sets the TC and Flow fields incorrectly.

Example:

This is IPv6 header of a sent packet. Note the priority/TC (=1) in the first byte.

00000000: 61 00 00 00 00 2c 06 40 fe 80 00 00 00 00 00 00 00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00 00000020: 02 1e ab ff fe 4c 52 57

This gets compressed like this in the sending side

00000000: 72 31 04 06 02 1e ab ff fe 4c 52 57 ec c2 00 16 00000010: aa 2d fe 92 86 4e be c6 ....

In the receiving end, the packet gets uncompressed to this IPv6 header

00000000: 60 06 06 02 00 2a 1e 40 fe 80 00 00 00 00 00 00 00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00 00000020: ab ff fe 4c 52 57 ec c2

First four bytes are set incorrectly and we have also lost two bytes from destination address.

The fix is to switch the case values in switch statement when checking the TC field.

---
 net/ieee802154/6lowpan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ieee802154/6lowpan.c +2 -2
@@ -803,7 +803,7 @@ lowpan_process_data(struct sk_buff *skb)
 	 * Traffic class carried in-line
 	 * ECN + DSCP (1 byte), Flow Label is elided
 	 */
-	case 1: /* 10b */
+	case 2: /* 10b */
 		if (!skb->len)
 			goto drop;
 		tmp = lowpan_fetch_skb_u8(skb);
@@ -816,7 +816,7 @@ lowpan_process_data(struct sk_buff *skb)
 	 * Flow Label carried in-line
 	 * ECN + 2-bit Pad + Flow Label (3 bytes), DSCP is elided
 	 */
-	case 2: /* 01b */
+	case 1: /* 01b */
 		if (!skb->len)
 			goto drop;
 		tmp = lowpan_fetch_skb_u8(skb);
author maintainer
#6 lore raw

PATCH 6/32 bonding: fix two race conditions in bond_store_updelay/downdelay

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <[email protected]>

[ Upstream commit b869ccfab1e324507fa3596e3e1308444fb68227 ]

This patch fixes two race conditions between bond_store_updelay/downdelay and bond_store_miimon which could lead to division by zero as miimon can be set to 0 while either updelay/downdelay are being set and thus miss the zero check in the beginning, the zero div happens because updelay/downdelay are stored as new_value / bond->params.miimon. Use rtnl to synchronize with miimon setting.

---
 drivers/net/bonding/bond_sysfs.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/bonding/bond_sysfs.c +6 -0
@@ -693,6 +693,8 @@ static ssize_t bonding_store_downdelay(s
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (!(bond->params.miimon)) {
 		pr_err("%s: Unable to set down delay as MII monitoring is disabled\n",
 		       bond->dev->name);
@@ -726,6 +728,7 @@ static ssize_t bonding_store_downdelay(s
 	}
 
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR,
@@ -748,6 +751,8 @@ static ssize_t bonding_store_updelay(str
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (!(bond->params.miimon)) {
 		pr_err("%s: Unable to set up delay as MII monitoring is disabled\n",
 		       bond->dev->name);
@@ -781,6 +786,7 @@ static ssize_t bonding_store_updelay(str
 	}
 
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR,
author maintainer
#7 lore raw

PATCH 7/32 isdnloop: use strlcpy() instead of strcpy()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[ Upstream commit f9a23c84486ed350cce7bb1b2828abd1f6658796 ]

These strings come from a copy_from_user() and there is no way to be sure they are NUL terminated.

---
 drivers/isdn/isdnloop/isdnloop.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/isdn/isdnloop/isdnloop.c +5 -3
@@ -1083,8 +1083,10 @@ isdnloop_start(isdnloop_card *card, isdn
 			spin_unlock_irqrestore(&card->isdnloop_lock, flags);
 			return -ENOMEM;
 		}
-		for (i = 0; i < 3; i++)
-			strcpy(card->s0num[i], sdef.num[i]);
+		for (i = 0; i < 3; i++) {
+			strlcpy(card->s0num[i], sdef.num[i],
+				sizeof(card->s0num[0]));
+		}
 		break;
 	case ISDN_PTYPE_1TR6:
 		if (isdnloop_fake(card, "DRV1.04TC-1TR6-CAPI-CNS-BASIS-29.11.95",
@@ -1097,7 +1099,7 @@ isdnloop_start(isdnloop_card *card, isdn
 			spin_unlock_irqrestore(&card->isdnloop_lock, flags);
 			return -ENOMEM;
 		}
-		strcpy(card->s0num[0], sdef.num[0]);
+		strlcpy(card->s0num[0], sdef.num[0], sizeof(card->s0num[0]));
 		card->s0num[1][0] = '\0';
 		card->s0num[2][0] = '\0';
 		break;
author maintainer
#8 lore raw

PATCH 8/32 connector: improved unaligned access error fix

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Metcalf <[email protected]>

[ Upstream commit 1ca1a4cf59ea343a1a70084fe7cc96f37f3cf5b1 ]

In af3e095a1fb4, Erik Jacobsen fixed one type of unaligned access bug for ia64 by converting a 64-bit write to use put_unaligned(). Unfortunately, since gcc will convert a short memset() to a series of appropriately-aligned stores, the problem is now visible again on tilegx, where the memset that zeros out proc_event is converted to three 64-bit stores, causing an unaligned access panic.

A better fix for the original problem is to ensure that proc_event is aligned to 8 bytes here. We can do that relatively easily by arranging to start the struct cn_msg aligned to 8 bytes and then offset by 4 bytes. Doing so means that the immediately following proc_event structure is then correctly aligned to 8 bytes.

The result is that the memset() stores are now aligned, and as an added benefit, we can remove the put_unaligned() calls in the code.

---
 drivers/connector/cn_proc.c |   66 ++++++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 27 deletions(-)
drivers/connector/cn_proc.c +39 -27
@@ -31,11 +31,23 @@
 #include <linux/ptrace.h>
 #include <linux/atomic.h>
 
-#include <asm/unaligned.h>
-
 #include <linux/cn_proc.h>
 
-#define CN_PROC_MSG_SIZE (sizeof(struct cn_msg) + sizeof(struct proc_event))
+/*
+ * Size of a cn_msg followed by a proc_event structure.  Since the
+ * sizeof struct cn_msg is a multiple of 4 bytes, but not 8 bytes, we
+ * add one 4-byte word to the size here, and then start the actual
+ * cn_msg structure 4 bytes into the stack buffer.  The result is that
+ * the immediately following proc_event structure is aligned to 8 bytes.
+ */
+#define CN_PROC_MSG_SIZE (sizeof(struct cn_msg) + sizeof(struct proc_event) + 4)
+
+/* See comment above; we test our assumption about sizeof struct cn_msg here. */
+static inline struct cn_msg *buffer_to_cn_msg(__u8 *buffer)
+{
+	BUILD_BUG_ON(sizeof(struct cn_msg) != 20);
+	return (struct cn_msg *)(buffer + 4);
+}
 
 static atomic_t proc_event_num_listeners = ATOMIC_INIT(0);
 static struct cb_id cn_proc_event_id = { CN_IDX_PROC, CN_VAL_PROC };
@@ -55,19 +67,19 @@ void proc_fork_connector(struct task_str
 {
 	struct cn_msg *msg;
 	struct proc_event *ev;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 	struct timespec ts;
 	struct task_struct *parent;
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg*)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event*)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->what = PROC_EVENT_FORK;
 	rcu_read_lock();
 	parent = rcu_dereference(task->real_parent);
@@ -90,17 +102,17 @@ void proc_exec_connector(struct task_str
 	struct cn_msg *msg;
 	struct proc_event *ev;
 	struct timespec ts;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg*)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event*)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->what = PROC_EVENT_EXEC;
 	ev->event_data.exec.process_pid = task->pid;
 	ev->event_data.exec.process_tgid = task->tgid;
@@ -116,14 +128,14 @@ void proc_id_connector(struct task_struc
 {
 	struct cn_msg *msg;
 	struct proc_event *ev;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 	struct timespec ts;
 	const struct cred *cred;
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg*)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event*)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	ev->what = which_id;
@@ -144,7 +156,7 @@ void proc_id_connector(struct task_struc
 	rcu_read_unlock();
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 
 	memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id));
 	msg->ack = 0; /* not used */
@@ -158,17 +170,17 @@ void proc_sid_connector(struct task_stru
 	struct cn_msg *msg;
 	struct proc_event *ev;
 	struct timespec ts;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg *)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event *)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->what = PROC_EVENT_SID;
 	ev->event_data.sid.process_pid = task->pid;
 	ev->event_data.sid.process_tgid = task->tgid;
@@ -185,17 +197,17 @@ void proc_ptrace_connector(struct task_s
 	struct cn_msg *msg;
 	struct proc_event *ev;
 	struct timespec ts;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg *)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event *)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->what = PROC_EVENT_PTRACE;
 	ev->event_data.ptrace.process_pid  = task->pid;
 	ev->event_data.ptrace.process_tgid = task->tgid;
@@ -220,17 +232,17 @@ void proc_comm_connector(struct task_str
 	struct cn_msg *msg;
 	struct proc_event *ev;
 	struct timespec ts;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg *)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event *)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->what = PROC_EVENT_COMM;
 	ev->event_data.comm.process_pid  = task->pid;
 	ev->event_data.comm.process_tgid = task->tgid;
@@ -247,18 +259,18 @@ void proc_exit_connector(struct task_str
 {
 	struct cn_msg *msg;
 	struct proc_event *ev;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 	struct timespec ts;
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg*)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event*)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	get_seq(&msg->seq, &ev->cpu);
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->what = PROC_EVENT_EXIT;
 	ev->event_data.exit.process_pid = task->pid;
 	ev->event_data.exit.process_tgid = task->tgid;
@@ -284,18 +296,18 @@ static void cn_proc_ack(int err, int rcv
 {
 	struct cn_msg *msg;
 	struct proc_event *ev;
-	__u8 buffer[CN_PROC_MSG_SIZE];
+	__u8 buffer[CN_PROC_MSG_SIZE] __aligned(8);
 	struct timespec ts;
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
 
-	msg = (struct cn_msg*)buffer;
+	msg = buffer_to_cn_msg(buffer);
 	ev = (struct proc_event*)msg->data;
 	memset(&ev->event_data, 0, sizeof(ev->event_data));
 	msg->seq = rcvd_seq;
 	ktime_get_ts(&ts); /* get high res monotonic timestamp */
-	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->timestamp_ns = timespec_to_ns(&ts);
 	ev->cpu = -1;
 	ev->what = PROC_EVENT_NONE;
 	ev->event_data.ack.err = err;
author maintainer
#9 lore raw

PATCH 9/32 ipv4: fix possible seqlock deadlock

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit c9e9042994d37cbc1ee538c500e9da1bb9d1bcdf ]

ip4_datagram_connect() being called from process context, it should use IP_INC_STATS() instead of IP_INC_STATS_BH() otherwise we can deadlock on 32bit arches, or get corruptions of SNMP counters.

Fixes 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
---
 net/ipv4/datagram.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/datagram.c +1 -1
@@ -57,7 +57,7 @@ int ip4_datagram_connect(struct sock *sk
 	if (IS_ERR(rt)) {
 		err = PTR_ERR(rt);
 		if (err == -ENETUNREACH)
-			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
+			IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
 		goto out;
 	}
 
author maintainer
#10 lore raw

PATCH 10/32 inet: prevent leakage of uninitialized memory to user in recv syscalls

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit bceaa90240b6019ed73b49965eac7d167610be69 ]

Only update *addr_len when we actually fill in sockaddr, otherwise we can return uninitialized memory from the stack to the caller in the recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL) checks because we only get called with a valid addr_len pointer either from sock_common_recvmsg or inet_recvmsg.

If a blocking read waits on a socket which is concurrently shut down we now return zero and set msg_msgnamelen to 0.

---
 net/ipv4/ping.c       |    9 ++++-----
 net/ipv4/raw.c        |    4 +---
 net/ipv4/udp.c        |    7 +------
 net/ipv6/raw.c        |    4 +---
 net/ipv6/udp.c        |    5 +----
 net/l2tp/l2tp_ip.c    |    4 +---
 net/phonet/datagram.c |    9 ++++-----
 7 files changed, 13 insertions(+), 29 deletions(-)
net/ipv4/ping.c +4 -5
@@ -624,7 +624,6 @@ static int ping_recvmsg(struct kiocb *io
 			size_t len, int noblock, int flags, int *addr_len)
 {
 	struct inet_sock *isk = inet_sk(sk);
-	struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
 	struct sk_buff *skb;
 	int copied, err;
 
@@ -634,9 +633,6 @@ static int ping_recvmsg(struct kiocb *io
 	if (flags & MSG_OOB)
 		goto out;
 
-	if (addr_len)
-		*addr_len = sizeof(*sin);
-
 	if (flags & MSG_ERRQUEUE)
 		return ip_recv_error(sk, msg, len);
 
@@ -658,11 +654,14 @@ static int ping_recvmsg(struct kiocb *io
 	sock_recv_timestamp(msg, sk, skb);
 
 	/* Copy the address. */
-	if (sin) {
+	if (msg->msg_name) {
+		struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
+
 		sin->sin_family = AF_INET;
 		sin->sin_port = 0 /* skb->h.uh->source */;
 		sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
 		memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+		*addr_len = sizeof(*sin);
 	}
 	if (isk->cmsg_flags)
 		ip_cmsg_recv(msg, skb);
net/ipv4/raw.c +1 -3
@@ -688,9 +688,6 @@ static int raw_recvmsg(struct kiocb *ioc
 	if (flags & MSG_OOB)
 		goto out;
 
-	if (addr_len)
-		*addr_len = sizeof(*sin);
-
 	if (flags & MSG_ERRQUEUE) {
 		err = ip_recv_error(sk, msg, len);
 		goto out;
@@ -718,6 +715,7 @@ static int raw_recvmsg(struct kiocb *ioc
 		sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
 		sin->sin_port = 0;
 		memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+		*addr_len = sizeof(*sin);
 	}
 	if (inet->cmsg_flags)
 		ip_cmsg_recv(msg, skb);
net/ipv4/udp.c +1 -6
@@ -1174,12 +1174,6 @@ int udp_recvmsg(struct kiocb *iocb, stru
 	int is_udplite = IS_UDPLITE(sk);
 	bool slow;
 
-	/*
-	 *	Check any passed addresses
-	 */
-	if (addr_len)
-		*addr_len = sizeof(*sin);
-
 	if (flags & MSG_ERRQUEUE)
 		return ip_recv_error(sk, msg, len);
 
@@ -1234,6 +1228,7 @@ try_again:
 		sin->sin_port = udp_hdr(skb)->source;
 		sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
 		memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+		*addr_len = sizeof(*sin);
 	}
 	if (inet->cmsg_flags)
 		ip_cmsg_recv(msg, skb);
net/ipv6/raw.c +1 -3
@@ -457,9 +457,6 @@ static int rawv6_recvmsg(struct kiocb *i
 	if (flags & MSG_OOB)
 		return -EOPNOTSUPP;
 
-	if (addr_len)
-		*addr_len=sizeof(*sin6);
-
 	if (flags & MSG_ERRQUEUE)
 		return ipv6_recv_error(sk, msg, len);
 
@@ -499,6 +496,7 @@ static int rawv6_recvmsg(struct kiocb *i
 		sin6->sin6_scope_id = 0;
 		if (ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL)
 			sin6->sin6_scope_id = IP6CB(skb)->iif;
+		*addr_len = sizeof(*sin6);
 	}
 
 	sock_recv_ts_and_drops(msg, sk, skb);
net/ipv6/udp.c +1 -4
@@ -348,9 +348,6 @@ int udpv6_recvmsg(struct kiocb *iocb, st
 	int is_udp4;
 	bool slow;
 
-	if (addr_len)
-		*addr_len=sizeof(struct sockaddr_in6);
-
 	if (flags & MSG_ERRQUEUE)
 		return ipv6_recv_error(sk, msg, len);
 
@@ -423,7 +420,7 @@ try_again:
 			if (ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL)
 				sin6->sin6_scope_id = IP6CB(skb)->iif;
 		}
-
+		*addr_len = sizeof(*sin6);
 	}
 	if (is_udp4) {
 		if (inet->cmsg_flags)
net/l2tp/l2tp_ip.c +1 -3
@@ -569,9 +569,6 @@ static int l2tp_ip_recvmsg(struct kiocb
 	if (flags & MSG_OOB)
 		goto out;
 
-	if (addr_len)
-		*addr_len = sizeof(*sin);
-
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb)
 		goto out;
@@ -594,6 +591,7 @@ static int l2tp_ip_recvmsg(struct kiocb
 		sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
 		sin->sin_port = 0;
 		memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+		*addr_len = sizeof(*sin);
 	}
 	if (inet->cmsg_flags)
 		ip_cmsg_recv(msg, skb);
net/phonet/datagram.c +4 -5
@@ -139,9 +139,6 @@ static int pn_recvmsg(struct kiocb *iocb
 			MSG_CMSG_COMPAT))
 		goto out_nofree;
 
-	if (addr_len)
-		*addr_len = sizeof(sa);
-
 	skb = skb_recv_datagram(sk, flags, noblock, &rval);
 	if (skb == NULL)
 		goto out_nofree;
@@ -162,8 +159,10 @@ static int pn_recvmsg(struct kiocb *iocb
 
 	rval = (flags & MSG_TRUNC) ? skb->len : copylen;
 
-	if (msg->msg_name != NULL)
-		memcpy(msg->msg_name, &sa, sizeof(struct sockaddr_pn));
+	if (msg->msg_name != NULL) {
+		memcpy(msg->msg_name, &sa, sizeof(sa));
+		*addr_len = sizeof(sa);
+	}
 
 out:
 	skb_free_datagram(sk, skb);
author maintainer
#11 lore raw

PATCH 11/32 net: rework recvmsg handler msg_name and msg_namelen logic

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ]

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)

	msg->msg_name = NULL

".

This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style.

---
 crypto/algif_hash.c          |    2 --
 crypto/algif_skcipher.c      |    1 -
 drivers/isdn/mISDN/socket.c  |   13 ++++---------
 drivers/net/ppp/pppoe.c      |    2 --
 include/linux/net.h          |    8 ++++++++
 net/appletalk/ddp.c          |   16 +++++++---------
 net/atm/common.c             |    2 --
 net/ax25/af_ax25.c           |    4 ++--
 net/bluetooth/af_bluetooth.c |    4 ----
 net/bluetooth/hci_sock.c     |    2 --
 net/bluetooth/rfcomm/sock.c  |    1 -
 net/caif/caif_socket.c       |    4 ----
 net/compat.c                 |    3 ++-
 net/core/iovec.c             |    3 ++-
 net/ipx/af_ipx.c             |    3 +--
 net/irda/af_irda.c           |    4 ----
 net/iucv/af_iucv.c           |    2 --
 net/key/af_key.c             |    1 -
 net/l2tp/l2tp_ppp.c          |    2 --
 net/llc/af_llc.c             |    2 --
 net/netlink/af_netlink.c     |    2 --
 net/netrom/af_netrom.c       |    3 +--
 net/nfc/rawsock.c            |    2 --
 net/packet/af_packet.c       |   32 +++++++++++++++-----------------
 net/rds/recv.c               |    2 --
 net/rose/af_rose.c           |    8 +++++---
 net/rxrpc/ar-recvmsg.c       |    9 ++++++---
 net/socket.c                 |   19 +++++++++++--------
 net/tipc/socket.c            |    6 ------
 net/unix/af_unix.c           |    5 -----
 net/x25/af_x25.c             |    3 +--
 31 files changed, 65 insertions(+), 105 deletions(-)
crypto/algif_hash.c +0 -2
@@ -161,8 +161,6 @@ static int hash_recvmsg(struct kiocb *un
 	else if (len < ds)
 		msg->msg_flags |= MSG_TRUNC;
 
-	msg->msg_namelen = 0;
-
 	lock_sock(sk);
 	if (ctx->more) {
 		ctx->more = 0;
crypto/algif_skcipher.c +0 -1
@@ -432,7 +432,6 @@ static int skcipher_recvmsg(struct kiocb
 	long copied = 0;
 
 	lock_sock(sk);
-	msg->msg_namelen = 0;
 	for (iov = msg->msg_iov, iovlen = msg->msg_iovlen; iovlen > 0;
 	     iovlen--, iov++) {
 		unsigned long seglen = iov->iov_len;
drivers/isdn/mISDN/socket.c +4 -9
@@ -117,7 +117,6 @@ mISDN_sock_recvmsg(struct kiocb *iocb, s
 {
 	struct sk_buff		*skb;
 	struct sock		*sk = sock->sk;
-	struct sockaddr_mISDN	*maddr;
 
 	int		copied, err;
 
@@ -135,9 +134,9 @@ mISDN_sock_recvmsg(struct kiocb *iocb, s
 	if (!skb)
 		return err;
 
-	if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
-		msg->msg_namelen = sizeof(struct sockaddr_mISDN);
-		maddr = (struct sockaddr_mISDN *)msg->msg_name;
+	if (msg->msg_name) {
+		struct sockaddr_mISDN *maddr = msg->msg_name;
+
 		maddr->family = AF_ISDN;
 		maddr->dev = _pms(sk)->dev->id;
 		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
@@ -150,11 +149,7 @@ mISDN_sock_recvmsg(struct kiocb *iocb, s
 			maddr->sapi = _pms(sk)->ch.addr & 0xFF;
 			maddr->tei =  (_pms(sk)->ch.addr >> 8) & 0xFF;
 		}
-	} else {
-		if (msg->msg_namelen)
-			printk(KERN_WARNING "%s: too small namelen %d\n",
-			       __func__, msg->msg_namelen);
-		msg->msg_namelen = 0;
+		msg->msg_namelen = sizeof(*maddr);
 	}
 
 	copied = skb->len + MISDN_HEADER_LEN;
drivers/net/ppp/pppoe.c +0 -2
@@ -985,8 +985,6 @@ static int pppoe_recvmsg(struct kiocb *i
 	if (error < 0)
 		goto end;
 
-	m->msg_namelen = 0;
-
 	if (skb) {
 		total_len = min_t(size_t, total_len, skb->len);
 		error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
include/linux/net.h +8 -0
@@ -198,6 +198,14 @@ struct proto_ops {
 #endif
 	int		(*sendmsg)   (struct kiocb *iocb, struct socket *sock,
 				      struct msghdr *m, size_t total_len);
+	/* Notes for implementing recvmsg:
+	 * ===============================
+	 * msg->msg_namelen should get updated by the recvmsg handlers
+	 * iff msg_name != NULL. It is by default 0 to prevent
+	 * returning uninitialized memory to user space.  The recvfrom
+	 * handlers can assume that msg.msg_name is either NULL or has
+	 * a minimum size of sizeof(struct sockaddr_storage).
+	 */
 	int		(*recvmsg)   (struct kiocb *iocb, struct socket *sock,
 				      struct msghdr *m, size_t total_len,
 				      int flags);
net/appletalk/ddp.c +7 -9
@@ -1740,7 +1740,6 @@ static int atalk_recvmsg(struct kiocb *i
 			 size_t size, int flags)
 {
 	struct sock *sk = sock->sk;
-	struct sockaddr_at *sat = (struct sockaddr_at *)msg->msg_name;
 	struct ddpehdr *ddp;
 	int copied = 0;
 	int offset = 0;
@@ -1769,14 +1768,13 @@ static int atalk_recvmsg(struct kiocb *i
 	}
 	err = skb_copy_datagram_iovec(skb, offset, msg->msg_iov, copied);
 
-	if (!err) {
-		if (sat) {
-			sat->sat_family      = AF_APPLETALK;
-			sat->sat_port        = ddp->deh_sport;
-			sat->sat_addr.s_node = ddp->deh_snode;
-			sat->sat_addr.s_net  = ddp->deh_snet;
-		}
-		msg->msg_namelen = sizeof(*sat);
+	if (!err && msg->msg_name) {
+		struct sockaddr_at *sat = msg->msg_name;
+		sat->sat_family      = AF_APPLETALK;
+		sat->sat_port        = ddp->deh_sport;
+		sat->sat_addr.s_node = ddp->deh_snode;
+		sat->sat_addr.s_net  = ddp->deh_snet;
+		msg->msg_namelen     = sizeof(*sat);
 	}
 
 	skb_free_datagram(sk, skb);	/* Free the datagram. */
net/atm/common.c +0 -2
@@ -520,8 +520,6 @@ int vcc_recvmsg(struct kiocb *iocb, stru
 	struct sk_buff *skb;
 	int copied, error = -EINVAL;
 
-	msg->msg_namelen = 0;
-
 	if (sock->state != SS_CONNECTED)
 		return -ENOTCONN;
 
net/ax25/af_ax25.c +2 -2
@@ -1640,11 +1640,11 @@ static int ax25_recvmsg(struct kiocb *io
 
 	skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 
-	if (msg->msg_namelen != 0) {
-		struct sockaddr_ax25 *sax = (struct sockaddr_ax25 *)msg->msg_name;
+	if (msg->msg_name) {
 		ax25_digi digi;
 		ax25_address src;
 		const unsigned char *mac = skb_mac_header(skb);
+		struct sockaddr_ax25 *sax = msg->msg_name;
 
 		memset(sax, 0, sizeof(struct full_sockaddr_ax25));
 		ax25_addr_parse(mac + 1, skb->data - mac - 1, &src, NULL,
net/bluetooth/af_bluetooth.c +0 -4
@@ -240,8 +240,6 @@ int bt_sock_recvmsg(struct kiocb *iocb,
 	if (flags & (MSG_OOB))
 		return -EOPNOTSUPP;
 
-	msg->msg_namelen = 0;
-
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb) {
 		if (sk->sk_shutdown & RCV_SHUTDOWN)
@@ -306,8 +304,6 @@ int bt_sock_stream_recvmsg(struct kiocb
 	if (flags & MSG_OOB)
 		return -EOPNOTSUPP;
 
-	msg->msg_namelen = 0;
-
 	BT_DBG("sk %p size %zu", sk, size);
 
 	lock_sock(sk);
net/bluetooth/hci_sock.c +0 -2
@@ -767,8 +767,6 @@ static int hci_sock_recvmsg(struct kiocb
 	if (!skb)
 		return err;
 
-	msg->msg_namelen = 0;
-
 	copied = skb->len;
 	if (len < copied) {
 		msg->msg_flags |= MSG_TRUNC;
net/bluetooth/rfcomm/sock.c +0 -1
@@ -628,7 +628,6 @@ static int rfcomm_sock_recvmsg(struct ki
 
 	if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
 		rfcomm_dlc_accept(d);
-		msg->msg_namelen = 0;
 		return 0;
 	}
 
net/caif/caif_socket.c +0 -4
@@ -287,8 +287,6 @@ static int caif_seqpkt_recvmsg(struct ki
 	if (m->msg_flags&MSG_OOB)
 		goto read_error;
 
-	m->msg_namelen = 0;
-
 	skb = skb_recv_datagram(sk, flags, 0 , &ret);
 	if (!skb)
 		goto read_error;
@@ -362,8 +360,6 @@ static int caif_stream_recvmsg(struct ki
 	if (flags&MSG_OOB)
 		goto out;
 
-	msg->msg_namelen = 0;
-
 	/*
 	 * Lock the socket to prevent queue disordering
 	 * while sleeps in memcpy_tomsg
net/compat.c +2 -1
@@ -93,7 +93,8 @@ int verify_compat_iovec(struct msghdr *k
 			if (err < 0)
 				return err;
 		}
-		kern_msg->msg_name = kern_address;
+		if (kern_msg->msg_name)
+			kern_msg->msg_name = kern_address;
 	} else
 		kern_msg->msg_name = NULL;
 
net/core/iovec.c +2 -1
@@ -48,7 +48,8 @@ int verify_iovec(struct msghdr *m, struc
 			if (err < 0)
 				return err;
 		}
-		m->msg_name = address;
+		if (m->msg_name)
+			m->msg_name = address;
 	} else {
 		m->msg_name = NULL;
 	}
net/ipx/af_ipx.c +1 -2
@@ -1835,8 +1835,6 @@ static int ipx_recvmsg(struct kiocb *ioc
 	if (skb->tstamp.tv64)
 		sk->sk_stamp = skb->tstamp;
 
-	msg->msg_namelen = sizeof(*sipx);
-
 	if (sipx) {
 		sipx->sipx_family	= AF_IPX;
 		sipx->sipx_port		= ipx->ipx_source.sock;
@@ -1844,6 +1842,7 @@ static int ipx_recvmsg(struct kiocb *ioc
 		sipx->sipx_network	= IPX_SKB_CB(skb)->ipx_source_net;
 		sipx->sipx_type 	= ipx->ipx_type;
 		sipx->sipx_zero		= 0;
+		msg->msg_namelen	= sizeof(*sipx);
 	}
 	rc = copied;
 
net/irda/af_irda.c +0 -4
@@ -1386,8 +1386,6 @@ static int irda_recvmsg_dgram(struct kio
 
 	IRDA_DEBUG(4, "%s()\n", __func__);
 
-	msg->msg_namelen = 0;
-
 	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
 				flags & MSG_DONTWAIT, &err);
 	if (!skb)
@@ -1452,8 +1450,6 @@ static int irda_recvmsg_stream(struct ki
 	target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
 	timeo = sock_rcvtimeo(sk, noblock);
 
-	msg->msg_namelen = 0;
-
 	do {
 		int chunk;
 		struct sk_buff *skb = skb_dequeue(&sk->sk_receive_queue);
net/iucv/af_iucv.c +0 -2
@@ -1331,8 +1331,6 @@ static int iucv_sock_recvmsg(struct kioc
 	struct sk_buff *skb, *rskb, *cskb;
 	int err = 0;
 
-	msg->msg_namelen = 0;
-
 	if ((sk->sk_state == IUCV_DISCONN) &&
 	    skb_queue_empty(&iucv->backlog_skb_q) &&
 	    skb_queue_empty(&sk->sk_receive_queue) &&
net/key/af_key.c +0 -1
@@ -3595,7 +3595,6 @@ static int pfkey_recvmsg(struct kiocb *k
 	if (flags & ~(MSG_PEEK|MSG_DONTWAIT|MSG_TRUNC|MSG_CMSG_COMPAT))
 		goto out;
 
-	msg->msg_namelen = 0;
 	skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &err);
 	if (skb == NULL)
 		goto out;
net/l2tp/l2tp_ppp.c +0 -2
@@ -200,8 +200,6 @@ static int pppol2tp_recvmsg(struct kiocb
 	if (sk->sk_state & PPPOX_BOUND)
 		goto end;
 
-	msg->msg_namelen = 0;
-
 	err = 0;
 	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
 				flags & MSG_DONTWAIT, &err);
net/llc/af_llc.c +0 -2
@@ -721,8 +721,6 @@ static int llc_ui_recvmsg(struct kiocb *
 	int target;	/* Read at least this many bytes */
 	long timeo;
 
-	msg->msg_namelen = 0;
-
 	lock_sock(sk);
 	copied = -ENOTCONN;
 	if (unlikely(sk->sk_type == SOCK_STREAM && sk->sk_state == TCP_LISTEN))
net/netlink/af_netlink.c +0 -2
@@ -1443,8 +1443,6 @@ static int netlink_recvmsg(struct kiocb
 	}
 #endif
 
-	msg->msg_namelen = 0;
-
 	copied = data_skb->len;
 	if (len < copied) {
 		msg->msg_flags |= MSG_TRUNC;
net/netrom/af_netrom.c +1 -2
@@ -1181,10 +1181,9 @@ static int nr_recvmsg(struct kiocb *iocb
 		sax->sax25_family = AF_NETROM;
 		skb_copy_from_linear_data_offset(skb, 7, sax->sax25_call.ax25_call,
 			      AX25_ADDR_LEN);
+		msg->msg_namelen = sizeof(*sax);
 	}
 
-	msg->msg_namelen = sizeof(*sax);
-
 	skb_free_datagram(sk, skb);
 
 	release_sock(sk);
net/nfc/rawsock.c +0 -2
@@ -235,8 +235,6 @@ static int rawsock_recvmsg(struct kiocb
 	if (!skb)
 		return rc;
 
-	msg->msg_namelen = 0;
-
 	copied = skb->len;
 	if (len < copied) {
 		msg->msg_flags |= MSG_TRUNC;
net/packet/af_packet.c +15 -17
@@ -2691,7 +2691,6 @@ static int packet_recvmsg(struct kiocb *
 	struct sock *sk = sock->sk;
 	struct sk_buff *skb;
 	int copied, err;
-	struct sockaddr_ll *sll;
 	int vnet_hdr_len = 0;
 
 	err = -EINVAL;
@@ -2774,22 +2773,10 @@ static int packet_recvmsg(struct kiocb *
 			goto out_free;
 	}
 
-	/*
-	 *	If the address length field is there to be filled in, we fill
-	 *	it in now.
+	/* You lose any data beyond the buffer you gave. If it worries
+	 * a user program they can ask the device for its MTU
+	 * anyway.
 	 */
-
-	sll = &PACKET_SKB_CB(skb)->sa.ll;
-	if (sock->type == SOCK_PACKET)
-		msg->msg_namelen = sizeof(struct sockaddr_pkt);
-	else
-		msg->msg_namelen = sll->sll_halen + offsetof(struct sockaddr_ll, sll_addr);
-
-	/*
-	 *	You lose any data beyond the buffer you gave. If it worries a
-	 *	user program they can ask the device for its MTU anyway.
-	 */
-
 	copied = skb->len;
 	if (copied > len) {
 		copied = len;
@@ -2802,9 +2789,20 @@ static int packet_recvmsg(struct kiocb *
 
 	sock_recv_ts_and_drops(msg, sk, skb);
 
-	if (msg->msg_name)
+	if (msg->msg_name) {
+		/* If the address length field is there to be filled
+		 * in, we fill it in now.
+		 */
+		if (sock->type == SOCK_PACKET) {
+			msg->msg_namelen = sizeof(struct sockaddr_pkt);
+		} else {
+			struct sockaddr_ll *sll = &PACKET_SKB_CB(skb)->sa.ll;
+			msg->msg_namelen = sll->sll_halen +
+				offsetof(struct sockaddr_ll, sll_addr);
+		}
 		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa,
 		       msg->msg_namelen);
+	}
 
 	if (pkt_sk(sk)->auxdata) {
 		struct tpacket_auxdata aux;
net/rds/recv.c +0 -2
@@ -410,8 +410,6 @@ int rds_recvmsg(struct kiocb *iocb, stru
 
 	rdsdebug("size %zu flags 0x%x timeo %ld\n", size, msg_flags, timeo);
 
-	msg->msg_namelen = 0;
-
 	if (msg_flags & MSG_OOB)
 		goto out;
 
net/rose/af_rose.c +5 -3
@@ -1220,7 +1220,6 @@ static int rose_recvmsg(struct kiocb *io
 {
 	struct sock *sk = sock->sk;
 	struct rose_sock *rose = rose_sk(sk);
-	struct sockaddr_rose *srose = (struct sockaddr_rose *)msg->msg_name;
 	size_t copied;
 	unsigned char *asmptr;
 	struct sk_buff *skb;
@@ -1256,8 +1255,11 @@ static int rose_recvmsg(struct kiocb *io
 
 	skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 
-	if (srose != NULL) {
-		memset(srose, 0, msg->msg_namelen);
+	if (msg->msg_name) {
+		struct sockaddr_rose *srose;
+
+		memset(msg->msg_name, 0, sizeof(struct full_sockaddr_rose));
+		srose = msg->msg_name;
 		srose->srose_family = AF_ROSE;
 		srose->srose_addr   = rose->dest_addr;
 		srose->srose_call   = rose->dest_call;
net/rxrpc/ar-recvmsg.c +6 -3
@@ -143,10 +143,13 @@ int rxrpc_recvmsg(struct kiocb *iocb, st
 
 		/* copy the peer address and timestamp */
 		if (!continue_call) {
-			if (msg->msg_name && msg->msg_namelen > 0)
+			if (msg->msg_name) {
+				size_t len =
+					sizeof(call->conn->trans->peer->srx);
 				memcpy(msg->msg_name,
-				       &call->conn->trans->peer->srx,
-				       sizeof(call->conn->trans->peer->srx));
+				       &call->conn->trans->peer->srx, len);
+				msg->msg_namelen = len;
+			}
 			sock_recv_ts_and_drops(msg, &rx->sk, skb);
 		}
 
net/socket.c +11 -8
@@ -1775,8 +1775,10 @@ SYSCALL_DEFINE6(recvfrom, int, fd, void
 	msg.msg_iov = &iov;
 	iov.iov_len = size;
 	iov.iov_base = ubuf;
-	msg.msg_name = (struct sockaddr *)&address;
-	msg.msg_namelen = sizeof(address);
+	/* Save some cycles and don't copy the address if not needed */
+	msg.msg_name = addr ? (struct sockaddr *)&address : NULL;
+	/* We assume all kernel code knows the size of sockaddr_storage */
+	msg.msg_namelen = 0;
 	if (sock->file->f_flags & O_NONBLOCK)
 		flags |= MSG_DONTWAIT;
 	err = sock_recvmsg(sock, &msg, size, flags);
@@ -2161,16 +2163,14 @@ static int ___sys_recvmsg(struct socket
 			goto out;
 	}
 
-	/*
-	 *      Save the user-mode address (verify_iovec will change the
-	 *      kernel msghdr to use the kernel address space)
+	/* Save the user-mode address (verify_iovec will change the
+	 * kernel msghdr to use the kernel address space)
 	 */
-
 	uaddr = (__force void __user *)msg_sys->msg_name;
 	uaddr_len = COMPAT_NAMELEN(msg);
-	if (MSG_CMSG_COMPAT & flags) {
+	if (MSG_CMSG_COMPAT & flags)
 		err = verify_compat_iovec(msg_sys, iov, &addr, VERIFY_WRITE);
-	} else
+	else
 		err = verify_iovec(msg_sys, iov, &addr, VERIFY_WRITE);
 	if (err < 0)
 		goto out_freeiov;
@@ -2179,6 +2179,9 @@ static int ___sys_recvmsg(struct socket
 	cmsg_ptr = (unsigned long)msg_sys->msg_control;
 	msg_sys->msg_flags = flags & (MSG_CMSG_CLOEXEC|MSG_CMSG_COMPAT);
 
+	/* We assume all kernel code knows the size of sockaddr_storage */
+	msg_sys->msg_namelen = 0;
+
 	if (sock->file->f_flags & O_NONBLOCK)
 		flags |= MSG_DONTWAIT;
 	err = (nosec ? sock_recvmsg_nosec : sock_recvmsg)(sock, msg_sys,
net/tipc/socket.c +0 -6
@@ -949,9 +949,6 @@ static int recv_msg(struct kiocb *iocb,
 		goto exit;
 	}
 
-	/* will be updated in set_orig_addr() if needed */
-	m->msg_namelen = 0;
-
 	timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
 restart:
 
@@ -1078,9 +1075,6 @@ static int recv_stream(struct kiocb *ioc
 		goto exit;
 	}
 
-	/* will be updated in set_orig_addr() if needed */
-	m->msg_namelen = 0;
-
 	target = sock_rcvlowat(sk, flags & MSG_WAITALL, buf_len);
 	timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
 restart:
net/unix/af_unix.c +0 -5
@@ -1755,7 +1755,6 @@ static void unix_copy_addr(struct msghdr
 {
 	struct unix_sock *u = unix_sk(sk);
 
-	msg->msg_namelen = 0;
 	if (u->addr) {
 		msg->msg_namelen = u->addr->len;
 		memcpy(msg->msg_name, u->addr->name, u->addr->len);
@@ -1779,8 +1778,6 @@ static int unix_dgram_recvmsg(struct kio
 	if (flags&MSG_OOB)
 		goto out;
 
-	msg->msg_namelen = 0;
-
 	err = mutex_lock_interruptible(&u->readlock);
 	if (err) {
 		err = sock_intr_errno(sock_rcvtimeo(sk, noblock));
@@ -1922,8 +1919,6 @@ static int unix_stream_recvmsg(struct ki
 	target = sock_rcvlowat(sk, flags&MSG_WAITALL, size);
 	timeo = sock_rcvtimeo(sk, flags&MSG_DONTWAIT);
 
-	msg->msg_namelen = 0;
-
 	/* Lock the socket to prevent queue disordering
 	 * while sleeps in memcpy_tomsg
 	 */
net/x25/af_x25.c +1 -2
@@ -1343,10 +1343,9 @@ static int x25_recvmsg(struct kiocb *ioc
 	if (sx25) {
 		sx25->sx25_family = AF_X25;
 		sx25->sx25_addr   = x25->dest_addr;
+		msg->msg_namelen = sizeof(*sx25);
 	}
 
-	msg->msg_namelen = sizeof(struct sockaddr_x25);
-
 	x25_check_rbuf(sk);
 	rc = copied;
 out_free_dgram:
author maintainer
#12 lore raw

PATCH 12/32 net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 68c6beb373955da0886d8f4f5995b3922ceda4be ]

In that case it is probable that kernel code overwrote part of the stack. So we should bail out loudly here.

The BUG_ON may be removed in future if we are sure all protocols are conformant.

---
 net/socket.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/socket.c +2 -1
@@ -215,12 +215,13 @@ static int move_addr_to_user(struct sock
 	int err;
 	int len;
 
+	BUG_ON(klen > sizeof(struct sockaddr_storage));
 	err = get_user(len, ulen);
 	if (err)
 		return err;
 	if (len > klen)
 		len = klen;
-	if (len < 0 || len > sizeof(struct sockaddr_storage))
+	if (len < 0)
 		return -EINVAL;
 	if (len) {
 		if (audit_sockaddr(klen, kaddr))
author maintainer
#13 lore raw

PATCH 13/32 inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 ]

Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before.

As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length.

This broke traceroute and such.

Fixes bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
Reported-by Tom Labanowski
Cc David S. Miller <[email protected]>
Cc Eric Dumazet <[email protected]>
---
 include/net/ip.h       |    2 +-
 include/net/ipv6.h     |    6 ++++--
 net/ipv4/ip_sockglue.c |    3 ++-
 net/ipv4/ping.c        |    2 +-
 net/ipv4/raw.c         |    2 +-
 net/ipv4/udp.c         |    2 +-
 net/ipv6/datagram.c    |    7 +++++--
 net/ipv6/raw.c         |    4 ++--
 net/ipv6/udp.c         |    4 ++--
 9 files changed, 19 insertions(+), 13 deletions(-)
include/net/ip.h +1 -1
@@ -466,7 +466,7 @@ extern int	compat_ip_getsockopt(struct s
 			int optname, char __user *optval, int __user *optlen);
 extern int	ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *));
 
-extern int 	ip_recv_error(struct sock *sk, struct msghdr *msg, int len);
+extern int 	ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len);
 extern void	ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err, 
 			      __be16 port, u32 info, u8 *payload);
 extern void	ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport,
include/net/ipv6.h +4 -2
@@ -606,8 +606,10 @@ extern int			compat_ipv6_getsockopt(stru
 extern int			ip6_datagram_connect(struct sock *sk, 
 						     struct sockaddr *addr, int addr_len);
 
-extern int 			ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len);
-extern int 			ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len);
+extern int 			ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
+						int *addr_len);
+extern int 			ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
+						 int *addr_len);
 extern void			ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port,
 						u32 info, u8 *payload);
 extern void			ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info);
net/ipv4/ip_sockglue.c +2 -1
@@ -367,7 +367,7 @@ void ip_local_error(struct sock *sk, int
 /*
  *	Handle MSG_ERRQUEUE
  */
-int ip_recv_error(struct sock *sk, struct msghdr *msg, int len)
+int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
 {
 	struct sock_exterr_skb *serr;
 	struct sk_buff *skb, *skb2;
@@ -404,6 +404,7 @@ int ip_recv_error(struct sock *sk, struc
 						   serr->addr_offset);
 		sin->sin_port = serr->port;
 		memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+		*addr_len = sizeof(*sin);
 	}
 
 	memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
net/ipv4/ping.c +1 -1
@@ -634,7 +634,7 @@ static int ping_recvmsg(struct kiocb *io
 		goto out;
 
 	if (flags & MSG_ERRQUEUE)
-		return ip_recv_error(sk, msg, len);
+		return ip_recv_error(sk, msg, len, addr_len);
 
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb)
net/ipv4/raw.c +1 -1
@@ -689,7 +689,7 @@ static int raw_recvmsg(struct kiocb *ioc
 		goto out;
 
 	if (flags & MSG_ERRQUEUE) {
-		err = ip_recv_error(sk, msg, len);
+		err = ip_recv_error(sk, msg, len, addr_len);
 		goto out;
 	}
 
net/ipv4/udp.c +1 -1
@@ -1175,7 +1175,7 @@ int udp_recvmsg(struct kiocb *iocb, stru
 	bool slow;
 
 	if (flags & MSG_ERRQUEUE)
-		return ip_recv_error(sk, msg, len);
+		return ip_recv_error(sk, msg, len, addr_len);
 
 try_again:
 	skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
net/ipv6/datagram.c +5 -2
@@ -315,7 +315,7 @@ void ipv6_local_rxpmtu(struct sock *sk,
 /*
  *	Handle MSG_ERRQUEUE
  */
-int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len)
+int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct sock_exterr_skb *serr;
@@ -366,6 +366,7 @@ int ipv6_recv_error(struct sock *sk, str
 			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
 					       &sin->sin6_addr);
 		}
+		*addr_len = sizeof(*sin);
 	}
 
 	memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
@@ -418,7 +419,8 @@ out:
 /*
  *	Handle IPV6_RECVPATHMTU
  */
-int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len)
+int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
+		     int *addr_len)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct sk_buff *skb;
@@ -452,6 +454,7 @@ int ipv6_recv_rxpmtu(struct sock *sk, st
 		sin->sin6_port = 0;
 		sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id;
 		sin->sin6_addr = mtu_info.ip6m_addr.sin6_addr;
+		*addr_len = sizeof(*sin);
 	}
 
 	put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info);
net/ipv6/raw.c +2 -2
@@ -458,10 +458,10 @@ static int rawv6_recvmsg(struct kiocb *i
 		return -EOPNOTSUPP;
 
 	if (flags & MSG_ERRQUEUE)
-		return ipv6_recv_error(sk, msg, len);
+		return ipv6_recv_error(sk, msg, len, addr_len);
 
 	if (np->rxpmtu && np->rxopt.bits.rxpmtu)
-		return ipv6_recv_rxpmtu(sk, msg, len);
+		return ipv6_recv_rxpmtu(sk, msg, len, addr_len);
 
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb)
net/ipv6/udp.c +2 -2
@@ -349,10 +349,10 @@ int udpv6_recvmsg(struct kiocb *iocb, st
 	bool slow;
 
 	if (flags & MSG_ERRQUEUE)
-		return ipv6_recv_error(sk, msg, len);
+		return ipv6_recv_error(sk, msg, len, addr_len);
 
 	if (np->rxpmtu && np->rxopt.bits.rxpmtu)
-		return ipv6_recv_rxpmtu(sk, msg, len);
+		return ipv6_recv_rxpmtu(sk, msg, len, addr_len);
 
 try_again:
 	skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
author maintainer
#14 lore raw

PATCH 14/32 net: clamp ->msg_namelen instead of returning an error

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[ Upstream commit db31c55a6fb245fdbb752a2ca4aefec89afabb06 ]

If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the original code that would lead to memory corruption in the kernel if you had audit configured. If you didn't have audit configured it was harmless.

There are some programs such as beta versions of Ruby which use too large of a buffer and returning an error code breaks them. We should clamp the ->msg_namelen value instead.

Fixes 1661bf364ae9 ("net: heap overflow in __audit_sockaddr()")
---
 net/compat.c |    2 +-
 net/socket.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
net/compat.c +1 -1
@@ -72,7 +72,7 @@ int get_compat_msghdr(struct msghdr *kms
 	    __get_user(kmsg->msg_flags, &umsg->msg_flags))
 		return -EFAULT;
 	if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
-		return -EINVAL;
+		kmsg->msg_namelen = sizeof(struct sockaddr_storage);
 	kmsg->msg_name = compat_ptr(tmp1);
 	kmsg->msg_iov = compat_ptr(tmp2);
 	kmsg->msg_control = compat_ptr(tmp3);
net/socket.c +1 -1
@@ -1908,7 +1908,7 @@ static int copy_msghdr_from_user(struct
 	if (copy_from_user(kmsg, umsg, sizeof(struct msghdr)))
 		return -EFAULT;
 	if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
-		return -EINVAL;
+		kmsg->msg_namelen = sizeof(struct sockaddr_storage);
 	return 0;
 }
 
author maintainer
#15 lore raw

PATCH 15/32 ipv6: fix leaking uninitialized port number of offender sockaddr

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 1fa4c710b6fe7b0aac9907240291b6fe6aafc3b8 ]

Offenders don't have port numbers, so set it to 0.

---
 net/ipv6/datagram.c |    1 +
 1 file changed, 1 insertion(+)
net/ipv6/datagram.c +1 -0
@@ -375,6 +375,7 @@ int ipv6_recv_error(struct sock *sk, str
 	if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) {
 		sin->sin6_family = AF_INET6;
 		sin->sin6_flowinfo = 0;
+		sin->sin6_port = 0;
 		sin->sin6_scope_id = 0;
 		if (skb->protocol == htons(ETH_P_IPV6)) {
 			sin->sin6_addr = ipv6_hdr(skb)->saddr;
author maintainer
#16 lore raw

PATCH 16/32 atm: idt77252: fix dev refcnt leak

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ying Xue <[email protected]>

[ Upstream commit b5de4a22f157ca345cdb3575207bf46402414bc1 ]

init_card() calls dev_get_by_name() to get a network deceive. But it doesn't decrease network device reference count after the device is used.

---
 drivers/atm/idt77252.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/idt77252.c +1 -1
@@ -3513,7 +3513,7 @@ init_card(struct atm_dev *dev)
 	tmp = dev_get_by_name(&init_net, tname);	/* jhs: was "tmp = dev_get(tname);" */
 	if (tmp) {
 		memcpy(card->atmdev->esi, tmp->dev_addr, 6);
-
+		dev_put(tmp);
 		printk("%s: ESI %pM\n", card->name, card->atmdev->esi);
 	}
 	/*
author maintainer
#17 lore raw

PATCH 17/32 net: core: Always propagate flag changes to interfaces

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <[email protected]>

[ Upstream commit d2615bf450694c1302d86b9cc8a8958edfe4c3a4 ]

The following commit:

    b6c40d68ff6498b7f63ddf97cf0aa818d748dee7
    net: only invoke dev->change_rx_flags when device is UP

tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count.
This commit blocked flag propagation to any device that is currently down.

A later commit:
deede2fabe24e00bd7e246eb81cd5767dc6fcfc7
vlan: Don't propagate flag changes on down interfaces

fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN.

The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following:

eth0----> bond0 ----> bridge0 ---> vlan50

If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface.

The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave it to the individual devices to decide whether they will block flag propagation or not.

---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/dev.c +1 -1
@@ -4443,7 +4443,7 @@ static void dev_change_rx_flags(struct n
 {
 	const struct net_device_ops *ops = dev->netdev_ops;
 
-	if ((dev->flags & IFF_UP) && ops->ndo_change_rx_flags)
+	if (ops->ndo_change_rx_flags)
 		ops->ndo_change_rx_flags(dev, flags);
 }
 
author maintainer
#18 lore raw

PATCH 18/32 bridge: flush brs address entry in fdb when remove the bridge dev

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ding Tianhong <[email protected]>

[ Upstream commit f873042093c0b418d2351fe142222b625c740149 ]

When the following commands are executed:

brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridge

The calltrace will occur:

[  563.312114] device eth1 left promiscuous mode
[  563.312188] br0: port 1(eth1) entered disabled state
[  563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects
[  563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G           O 3.12.0-0.7-default+ #9
[  563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  563.468200]  0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8
[  563.468204]  ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8
[  563.468206]  ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78
[  563.468209] Call Trace:
[  563.468218]  [<ffffffff814d1c92>] dump_stack+0x6a/0x78
[  563.468234]  [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100
[  563.468242]  [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge]
[  563.468247]  [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge]
[  563.468254]  [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0
[  563.468259]  [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b
[  570.377958] Bridge firewalling registered

--------------------------- cut here -------------------------------

The reason is that when the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge.

v2: according to the Toshiaki Makita and Vlad's suggestion, I only
delete the vlan0 entry, it still have a leak here if the vlan id is other number, so I need to call fdb_delete_by_port(br, NULL, 1) to flush all entries whose dst is NULL for the bridge.

---
 net/bridge/br_if.c |    2 ++
 1 file changed, 2 insertions(+)
net/bridge/br_if.c +2 -0
@@ -170,6 +170,8 @@ void br_dev_delete(struct net_device *de
 		del_nbp(p);
 	}
 
+	br_fdb_delete_by_port(br, NULL, 1);
+
 	del_timer_sync(&br->gc_timer);
 
 	br_sysfs_delbr(br->dev);
author maintainer
#19 lore raw

PATCH 19/32 packet: fix use after free race in send path when dev is released

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <[email protected]>

[ Upstream commit e40526cb20b5ee53419452e1f03d97092f144418 ]

Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device.

To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls.

In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore.

Fixes 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.")
Cc Ben Greear <[email protected]>
Cc Eric Dumazet <[email protected]>
---
 net/packet/af_packet.c |   60 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 23 deletions(-)
net/packet/af_packet.c +37 -23
@@ -294,6 +294,7 @@ struct packet_sock {
 	unsigned int		tp_reserve;
 	unsigned int		tp_loss:1;
 	unsigned int		tp_tstamp;
+	struct net_device __rcu	*cached_dev;
 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
 };
 
@@ -349,11 +350,15 @@ static void __fanout_link(struct sock *s
 static void register_prot_hook(struct sock *sk)
 {
 	struct packet_sock *po = pkt_sk(sk);
+
 	if (!po->running) {
-		if (po->fanout)
+		if (po->fanout) {
 			__fanout_link(sk, po);
-		else
+		} else {
 			dev_add_pack(&po->prot_hook);
+			rcu_assign_pointer(po->cached_dev, po->prot_hook.dev);
+		}
+
 		sock_hold(sk);
 		po->running = 1;
 	}
@@ -371,10 +376,13 @@ static void __unregister_prot_hook(struc
 	struct packet_sock *po = pkt_sk(sk);
 
 	po->running = 0;
-	if (po->fanout)
+	if (po->fanout) {
 		__fanout_unlink(sk, po);
-	else
+	} else {
 		__dev_remove_pack(&po->prot_hook);
+		RCU_INIT_POINTER(po->cached_dev, NULL);
+	}
+
 	__sock_put(sk);
 
 	if (sync) {
@@ -2044,12 +2052,24 @@ static int tpacket_fill_skb(struct packe
 	return tp_len;
 }
 
+static struct net_device *packet_cached_dev_get(struct packet_sock *po)
+{
+	struct net_device *dev;
+
+	rcu_read_lock();
+	dev = rcu_dereference(po->cached_dev);
+	if (dev)
+		dev_hold(dev);
+	rcu_read_unlock();
+
+	return dev;
+}
+
 static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
 {
 	struct sk_buff *skb;
 	struct net_device *dev;
 	__be16 proto;
-	bool need_rls_dev = false;
 	int err, reserve = 0;
 	void *ph;
 	struct sockaddr_ll *saddr = (struct sockaddr_ll *)msg->msg_name;
@@ -2063,7 +2083,7 @@ static int tpacket_snd(struct packet_soc
 
 	err = -EBUSY;
 	if (saddr == NULL) {
-		dev = po->prot_hook.dev;
+		dev	= packet_cached_dev_get(po);
 		proto	= po->num;
 		addr	= NULL;
 	} else {
@@ -2077,19 +2097,17 @@ static int tpacket_snd(struct packet_soc
 		proto	= saddr->sll_protocol;
 		addr	= saddr->sll_addr;
 		dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex);
-		need_rls_dev = true;
 	}
 
 	err = -ENXIO;
 	if (unlikely(dev == NULL))
 		goto out;
-
-	reserve = dev->hard_header_len;
-
 	err = -ENETDOWN;
 	if (unlikely(!(dev->flags & IFF_UP)))
 		goto out_put;
 
+	reserve = dev->hard_header_len;
+
 	size_max = po->tx_ring.frame_size
 		- (po->tp_hdrlen - sizeof(struct sockaddr_ll));
 
@@ -2166,8 +2184,7 @@ out_status:
 	__packet_set_status(po, ph, status);
 	kfree_skb(skb);
 out_put:
-	if (need_rls_dev)
-		dev_put(dev);
+	dev_put(dev);
 out:
 	mutex_unlock(&po->pg_vec_lock);
 	return err;
@@ -2205,7 +2222,6 @@ static int packet_snd(struct socket *soc
 	struct sk_buff *skb;
 	struct net_device *dev;
 	__be16 proto;
-	bool need_rls_dev = false;
 	unsigned char *addr;
 	int err, reserve = 0;
 	struct virtio_net_hdr vnet_hdr = { 0 };
@@ -2221,7 +2237,7 @@ static int packet_snd(struct socket *soc
 	 */
 
 	if (saddr == NULL) {
-		dev = po->prot_hook.dev;
+		dev	= packet_cached_dev_get(po);
 		proto	= po->num;
 		addr	= NULL;
 	} else {
@@ -2233,19 +2249,17 @@ static int packet_snd(struct socket *soc
 		proto	= saddr->sll_protocol;
 		addr	= saddr->sll_addr;
 		dev = dev_get_by_index(sock_net(sk), saddr->sll_ifindex);
-		need_rls_dev = true;
 	}
 
 	err = -ENXIO;
-	if (dev == NULL)
+	if (unlikely(dev == NULL))
 		goto out_unlock;
-	if (sock->type == SOCK_RAW)
-		reserve = dev->hard_header_len;
-
 	err = -ENETDOWN;
-	if (!(dev->flags & IFF_UP))
+	if (unlikely(!(dev->flags & IFF_UP)))
 		goto out_unlock;
 
+	if (sock->type == SOCK_RAW)
+		reserve = dev->hard_header_len;
 	if (po->has_vnet_hdr) {
 		vnet_hdr_len = sizeof(vnet_hdr);
 
@@ -2378,15 +2392,14 @@ static int packet_snd(struct socket *soc
 	if (err > 0 && (err = net_xmit_errno(err)) != 0)
 		goto out_unlock;
 
-	if (need_rls_dev)
-		dev_put(dev);
+	dev_put(dev);
 
 	return len;
 
 out_free:
 	kfree_skb(skb);
 out_unlock:
-	if (dev && need_rls_dev)
+	if (dev)
 		dev_put(dev);
 out:
 	return err;
@@ -2603,6 +2616,7 @@ static int packet_create(struct net *net
 	po = pkt_sk(sk);
 	sk->sk_family = PF_PACKET;
 	po->num = proto;
+	RCU_INIT_POINTER(po->cached_dev, NULL);
 
 	sk->sk_destruct = packet_sock_destruct;
 	sk_refcnt_debug_inc(sk);
author maintainer
#20 lore raw

PATCH 20/32 af_packet: block BH in prb_shutdown_retire_blk_timer()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Veaceslav Falico <[email protected]>

[ Upstream commit ec6f809ff6f19fafba3212f6aff0dda71dfac8e8 ]

Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(), however the timer might fire right in the middle and thus try to re-aquire the same spinlock, leaving us in a endless loop.

To fix that, use the spin_lock_bh() to block it.

Fixes f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
CC "David S. Miller" <[email protected]>
CC Daniel Borkmann <[email protected]>
CC Willem de Bruijn <[email protected]>
CC Phil Sutter <[email protected]>
CC Eric Dumazet <[email protected]>
---
 net/packet/af_packet.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/packet/af_packet.c +2 -2
@@ -504,9 +504,9 @@ static void prb_shutdown_retire_blk_time
 
 	pkc = tx_ring ? &po->tx_ring.prb_bdqc : &po->rx_ring.prb_bdqc;
 
-	spin_lock(&rb_queue->lock);
+	spin_lock_bh(&rb_queue->lock);
 	pkc->delete_blk_timer = 1;
-	spin_unlock(&rb_queue->lock);
+	spin_unlock_bh(&rb_queue->lock);
 
 	prb_del_retire_blk_timer(pkc);
 }
author maintainer
#21 lore raw

PATCH 21/32 net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shawn Landden <[email protected]>

[ Upstream commit d3f7d56a7a4671d395e8af87071068a195257bf6 ]

Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE.

algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE.

This fixes sendfile() on AF_ALG.

v3: also fix udp

Reported-and-tested-by Shawn Landden <[email protected]>
Cc Tom Herbert <[email protected]>
Cc Eric Dumazet <[email protected]>
Cc David S. Miller <[email protected]>

Original-patch: Richard Weinberger <[email protected]>

---
 crypto/algif_hash.c     |    3 +++
 crypto/algif_skcipher.c |    3 +++
 net/ipv4/udp.c          |    3 +++
 3 files changed, 9 insertions(+)
crypto/algif_hash.c +3 -0
@@ -114,6 +114,9 @@ static ssize_t hash_sendpage(struct sock
 	struct hash_ctx *ctx = ask->private;
 	int err;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	sg_init_table(ctx->sgl.sg, 1);
 	sg_set_page(ctx->sgl.sg, page, size, offset);
crypto/algif_skcipher.c +3 -0
@@ -378,6 +378,9 @@ static ssize_t skcipher_sendpage(struct
 	struct skcipher_sg_list *sgl;
 	int err = -EINVAL;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	if (!ctx->more && ctx->used)
 		goto unlock;
net/ipv4/udp.c +3 -0
@@ -1039,6 +1039,9 @@ int udp_sendpage(struct sock *sk, struct
 	struct udp_sock *up = udp_sk(sk);
 	int ret;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	if (!up->pending) {
 		struct msghdr msg = {	.msg_flags = flags|MSG_MORE };
 
author maintainer
#22 lore raw

PATCH 22/32 inet: fix possible seqlock deadlocks

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit f1d8cba61c3c4b1eb88e507249c4cb8d635d9a76 ]

In commit c9e9042994d3 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used.

udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context.

This was detected by lockdep seqlock support.

Fixes 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
Fixes c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Cc Hannes Frederic Sowa <[email protected]>
---
 net/ipv4/ping.c     |    2 +-
 net/ipv4/tcp_ipv4.c |    2 +-
 net/ipv4/udp.c      |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
net/ipv4/ping.c +1 -1
@@ -568,7 +568,7 @@ static int ping_sendmsg(struct kiocb *io
 		err = PTR_ERR(rt);
 		rt = NULL;
 		if (err == -ENETUNREACH)
-			IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+			IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES);
 		goto out;
 	}
 
net/ipv4/tcp_ipv4.c +1 -1
@@ -176,7 +176,7 @@ int tcp_v4_connect(struct sock *sk, stru
 	if (IS_ERR(rt)) {
 		err = PTR_ERR(rt);
 		if (err == -ENETUNREACH)
-			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
+			IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
 		return err;
 	}
 
net/ipv4/udp.c +1 -1
@@ -940,7 +940,7 @@ int udp_sendmsg(struct kiocb *iocb, stru
 			err = PTR_ERR(rt);
 			rt = NULL;
 			if (err == -ENETUNREACH)
-				IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+				IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES);
 			goto out;
 		}
 
author maintainer
#23 lore raw

PATCH 23/32 ipv6: fix possible seqlock deadlock in ip6_finish_output2

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 7f88c6b23afbd31545c676dea77ba9593a1a14bf ]

IPv6 stats are 64 bits and thus are protected with a seqlock. By not disabling bottom-half we could deadlock here if we don't disable bh and a softirq reentrantly updates the same mib.

---
 net/ipv6/ip6_output.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv6/ip6_output.c +2 -2
@@ -144,8 +144,8 @@ static int ip6_finish_output2(struct sk_
 		return res;
 	}
 	rcu_read_unlock();
-	IP6_INC_STATS_BH(dev_net(dst->dev),
-			 ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
+	IP6_INC_STATS(dev_net(dst->dev),
+		      ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
 	kfree_skb(skb);
 	return -EINVAL;
 }
author maintainer
#24 lore raw

PATCH 24/32 {pktgen, xfrm} Update IPv4 header total len and checksum after tranformation

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "fan.du" <[email protected]>

[ Upstream commit 3868204d6b89ea373a273e760609cb08020beb1a ]

commit a553e4a6317b2cfc7659542c10fe43184ffe53da ("[PKTGEN]: IPSEC support") tried to support IPsec ESP transport transformation for pktgen, but acctually this doesn't work at all for two reasons(The orignal transformed packet has bad IPv4 checksum value, as well as wrong auth value, reported by wireshark)

- After transpormation, IPv4 header total length needs update, because encrypted payload's length is NOT same as that of plain text.

- After transformation, IPv4 checksum needs re-caculate because of payload has been changed.

With this patch, armmed pktgen with below cofiguration, Wireshark is able to decrypted ESP packet generated by pktgen without any IPv4 checksum error or auth value error.

pgset "flag IPSEC"
pgset "flows 1"

---
 net/core/pktgen.c |    7 +++++++
 1 file changed, 7 insertions(+)
net/core/pktgen.c +7 -0
@@ -2521,6 +2521,8 @@ static int process_ipsec(struct pktgen_d
 		if (x) {
 			int ret;
 			__u8 *eth;
+			struct iphdr *iph;
+
 			nhead = x->props.header_len - skb_headroom(skb);
 			if (nhead > 0) {
 				ret = pskb_expand_head(skb, nhead, 0, GFP_ATOMIC);
@@ -2542,6 +2544,11 @@ static int process_ipsec(struct pktgen_d
 			eth = (__u8 *) skb_push(skb, ETH_HLEN);
 			memcpy(eth, pkt_dev->hh, 12);
 			*(u16 *) &eth[12] = protocol;
+
+			/* Update IPv4 header len as well as checksum value */
+			iph = ip_hdr(skb);
+			iph->tot_len = htons(skb->len - ETH_HLEN);
+			ip_send_check(iph);
 		}
 	}
 	return 1;
author maintainer
#25 lore raw

PATCH 25/32 HID: picolcd_core: validate output report details

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kees Cook <[email protected]>

commit 1e87a2456b0227ca4ab881e19a11bb99d164e792 upstream.

A HID device could send a malicious output report that would cause the picolcd HID driver to trigger a NULL dereference during attr file writing.

[[email protected]: changed

	report->maxfield < 1

to

	report->maxfield != 1

as suggested by Bruno].

CVE-2013-2899

---
 drivers/hid/hid-picolcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/hid-picolcd.c +1 -1
@@ -1424,7 +1424,7 @@ static ssize_t picolcd_operation_mode_st
 		buf += 10;
 		cnt -= 10;
 	}
-	if (!report)
+	if (!report || report->maxfield != 1)
 		return -EINVAL;
 
 	while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))
author maintainer
#26 lore raw

PATCH 26/32 mmc: block: fix a bug of error handling in MMC driver

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: KOBAYASHI Yoshitake <[email protected]>

commit c8760069627ad3b0dbbea170f0c4c58b16e18d3d upstream.

Current MMC driver doesn't handle generic error (bit19 of device status) in write sequence. As a result, write data gets lost when generic error occurs. For example, a generic error when updating a filesystem management information causes a loss of write data and corrupts the filesystem. In the worst case, the system will never boot.

This patch includes the following functionality:
1. To enable error checking for the response of CMD12 and CMD13 in write command sequence
2. To retry write sequence when a generic error occurs

Messages are added for v2 to show what occurs.

---
 drivers/mmc/card/block.c |   47 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 3 deletions(-)
drivers/mmc/card/block.c +44 -3
@@ -701,7 +701,7 @@ static int mmc_blk_cmd_error(struct requ
  * Otherwise we don't understand what happened, so abort.
  */
 static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
-	struct mmc_blk_request *brq, int *ecc_err)
+	struct mmc_blk_request *brq, int *ecc_err, int *gen_err)
 {
 	bool prev_cmd_status_valid = true;
 	u32 status, stop_status = 0;
@@ -739,6 +739,16 @@ static int mmc_blk_cmd_recovery(struct m
 	    (brq->cmd.resp[0] & R1_CARD_ECC_FAILED))
 		*ecc_err = 1;
 
+	/* Flag General errors */
+	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
+		if ((status & R1_ERROR) ||
+			(brq->stop.resp[0] & R1_ERROR)) {
+			pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n",
+			       req->rq_disk->disk_name, __func__,
+			       brq->stop.resp[0], status);
+			*gen_err = 1;
+		}
+
 	/*
 	 * Check the current card state.  If it is in some data transfer
 	 * mode, tell it to stop (and hopefully transition back to TRAN.)
@@ -758,6 +768,13 @@ static int mmc_blk_cmd_recovery(struct m
 			return ERR_ABORT;
 		if (stop_status & R1_CARD_ECC_FAILED)
 			*ecc_err = 1;
+		if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
+			if (stop_status & R1_ERROR) {
+				pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
+				       req->rq_disk->disk_name, __func__,
+				       stop_status);
+				*gen_err = 1;
+			}
 	}
 
 	/* Check for set block count errors */
@@ -1007,7 +1024,7 @@ static int mmc_blk_err_check(struct mmc_
 						    mmc_active);
 	struct mmc_blk_request *brq = &mq_mrq->brq;
 	struct request *req = mq_mrq->req;
-	int ecc_err = 0;
+	int ecc_err = 0, gen_err = 0;
 
 	/*
 	 * sbc.error indicates a problem with the set block count
@@ -1021,7 +1038,7 @@ static int mmc_blk_err_check(struct mmc_
 	 */
 	if (brq->sbc.error || brq->cmd.error || brq->stop.error ||
 	    brq->data.error) {
-		switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err)) {
+		switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) {
 		case ERR_RETRY:
 			return MMC_BLK_RETRY;
 		case ERR_ABORT:
@@ -1051,6 +1068,15 @@ static int mmc_blk_err_check(struct mmc_
 	 */
 	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
 		u32 status;
+
+		/* Check stop command response */
+		if (brq->stop.resp[0] & R1_ERROR) {
+			pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
+			       req->rq_disk->disk_name, __func__,
+			       brq->stop.resp[0]);
+			gen_err = 1;
+		}
+
 		do {
 			int err = get_card_status(card, &status, 5);
 			if (err) {
@@ -1058,6 +1084,14 @@ static int mmc_blk_err_check(struct mmc_
 				       req->rq_disk->disk_name, err);
 				return MMC_BLK_CMD_ERR;
 			}
+
+			if (status & R1_ERROR) {
+				pr_err("%s: %s: general error sending status command, card status %#x\n",
+				       req->rq_disk->disk_name, __func__,
+				       status);
+				gen_err = 1;
+			}
+
 			/*
 			 * Some cards mishandle the status bits,
 			 * so make sure to check both the busy
@@ -1067,6 +1101,13 @@ static int mmc_blk_err_check(struct mmc_
 			 (R1_CURRENT_STATE(status) == R1_STATE_PRG));
 	}
 
+	/* if general error occurs, retry the write operation. */
+	if (gen_err) {
+		pr_warning("%s: retrying write for general error\n",
+				req->rq_disk->disk_name);
+		return MMC_BLK_RETRY;
+	}
+
 	if (brq->data.error) {
 		pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n",
 		       req->rq_disk->disk_name, brq->data.error,
author maintainer
#27 lore raw

PATCH 27/32 nfsd: use "init_net" for portmapper

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stanislav Kinsbursky <[email protected]>

commit f7fb86c6e639360ad9c253cec534819ef928a674 upstream.

There could be a situation, when NFSd was started in one network namespace, but stopped in another one.
This will trigger kernel panic, because RPCBIND client is stored on per-net NFSd data, and will be NULL on NFSd shutdown.

---
 fs/nfsd/nfssvc.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/nfsd/nfssvc.c +1 -2
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/fs_struct.h>
 #include <linux/swap.h>
-#include <linux/nsproxy.h>
 
 #include <linux/sunrpc/stats.h>
 #include <linux/sunrpc/svcsock.h>
@@ -330,7 +329,7 @@ static int nfsd_get_default_max_blksize(
 int nfsd_create_serv(void)
 {
 	int error;
-	struct net *net = current->nsproxy->net_ns;
+	struct net *net = &init_net;
 
 	WARN_ON(!mutex_is_locked(&nfsd_mutex));
 	if (nfsd_serv) {
author maintainer
#28 lore raw

PATCH 28/32 video: kyro: fix incorrect sizes when copying to userspace

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sasha Levin <[email protected]>

commit 2ab68ec927310dc488f3403bb48f9e4ad00a9491 upstream.

kyro would copy u32s and specify sizeof(unsigned long) as the size to copy.

This would copy more data than intended and cause memory corruption and might leak kernel memory.

---
 drivers/video/kyro/fbdev.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/video/kyro/fbdev.c +3 -3
@@ -625,15 +625,15 @@ static int kyrofb_ioctl(struct fb_info *
 		}
 		break;
 	case KYRO_IOCTL_UVSTRIDE:
-		if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(unsigned long)))
+		if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(deviceInfo.ulOverlayUVStride)))
 			return -EFAULT;
 		break;
 	case KYRO_IOCTL_STRIDE:
-		if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(unsigned long)))
+		if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(deviceInfo.ulOverlayStride)))
 			return -EFAULT;
 		break;
 	case KYRO_IOCTL_OVERLAY_OFFSET:
-		if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(unsigned long)))
+		if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(deviceInfo.ulOverlayOffset)))
 			return -EFAULT;
 		break;
 	}
author maintainer
#29 lore raw

PATCH 29/32 iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Stecklina <[email protected]>

commit f9423606ade08653dd8a43334f0a7fb45504c5cc upstream.

The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that it gets addresses beyond the addressing capabilities of its IOMMU. intel_iommu_iova_to_phys does not.

This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and (correctly) return EFAULT to the user with a helpful warning message in the kernel log.

---
 drivers/iommu/intel-iommu.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +5 -1
@@ -778,7 +778,11 @@ static struct dma_pte *pfn_to_dma_pte(st
 	int offset;
 
 	BUG_ON(!domain->pgd);
-	BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
+
+	if (addr_width < BITS_PER_LONG && pfn >> addr_width)
+		/* Address beyond IOMMU's addressing capabilities. */
+		return NULL;
+
 	parent = domain->pgd;
 
 	while (level > 0) {
author maintainer
#30 lore raw

PATCH 30/32 elevator: acquire q->sysfs_lock in elevator_change()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tomoki Sekiyama <[email protected]>

commit 7c8a3679e3d8e9d92d58f282161760a0e247df97 upstream.

Add locking of q->sysfs_lock into elevator_change() (an exported function) to ensure it is held to protect q->elevator from elevator_init(), even if elevator_change() is called from non-sysfs paths.
sysfs path (elv_iosched_store) uses __elevator_change(), non-locking version, as the lock is already taken by elv_iosched_store().

---
 block/elevator.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
block/elevator.c +14 -2
@@ -961,7 +961,7 @@ fail_register:
 /*
  * Switch this queue to the given IO scheduler.
  */
-int elevator_change(struct request_queue *q, const char *name)
+static int __elevator_change(struct request_queue *q, const char *name)
 {
 	char elevator_name[ELV_NAME_MAX];
 	struct elevator_type *e;
@@ -983,6 +983,18 @@ int elevator_change(struct request_queue
 
 	return elevator_switch(q, e);
 }
+
+int elevator_change(struct request_queue *q, const char *name)
+{
+	int ret;
+
+	/* Protect q->elevator from elevator_init() */
+	mutex_lock(&q->sysfs_lock);
+	ret = __elevator_change(q, name);
+	mutex_unlock(&q->sysfs_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL(elevator_change);
 
 ssize_t elv_iosched_store(struct request_queue *q, const char *name,
@@ -993,7 +1005,7 @@ ssize_t elv_iosched_store(struct request
 	if (!q->elevator)
 		return count;
 
-	ret = elevator_change(q, name);
+	ret = __elevator_change(q, name);
 	if (!ret)
 		return count;
 
author maintainer
#31 lore raw

PATCH 31/32 dm: fix truncated status strings

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit fd7c092e711ebab55b2688d3859d95dfd0301f73 upstream.

Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer.

When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG.

However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero.

If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned.

In the current code, the targets behave in the following way:
* dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows.
* dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow.
* all the other targets always return 0.

This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in
retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened.

---
 drivers/md/dm-crypt.c         |   37 ++++----------------
 drivers/md/dm-delay.c         |    6 +--
 drivers/md/dm-flakey.c        |    5 +-
 drivers/md/dm-ioctl.c         |   18 ++++++---
 drivers/md/dm-linear.c        |    5 +-
 drivers/md/dm-mpath.c         |    6 +--
 drivers/md/dm-raid.c          |    6 +--
 drivers/md/dm-raid1.c         |    6 +--
 drivers/md/dm-snap.c          |   12 ++----
 drivers/md/dm-stripe.c        |    5 +-
 drivers/md/dm-thin.c          |   76 +++++++++++++++++++++++++-----------------
 drivers/md/dm-verity.c        |    6 +--
 include/linux/device-mapper.h |    4 +-
 13 files changed, 88 insertions(+), 104 deletions(-)
drivers/md/dm-crypt.c +8 -29
@@ -1262,20 +1262,6 @@ static int crypt_decode_key(u8 *key, cha
 	return 0;
 }
 
-/*
- * Encode key into its hex representation
- */
-static void crypt_encode_key(char *hex, u8 *key, unsigned int size)
-{
-	unsigned int i;
-
-	for (i = 0; i < size; i++) {
-		sprintf(hex, "%02x", *key);
-		hex += 2;
-		key++;
-	}
-}
-
 static void crypt_free_tfms(struct crypt_config *cc, int cpu)
 {
 	struct crypt_cpu *cpu_cc = per_cpu_ptr(cc->cpu, cpu);
@@ -1741,11 +1727,11 @@ static int crypt_map(struct dm_target *t
 	return DM_MAPIO_SUBMITTED;
 }
 
-static int crypt_status(struct dm_target *ti, status_type_t type,
-			char *result, unsigned int maxlen)
+static void crypt_status(struct dm_target *ti, status_type_t type,
+			 char *result, unsigned int maxlen)
 {
 	struct crypt_config *cc = ti->private;
-	unsigned int sz = 0;
+	unsigned i, sz = 0;
 
 	switch (type) {
 	case STATUSTYPE_INFO:
@@ -1755,17 +1741,11 @@ static int crypt_status(struct dm_target
 	case STATUSTYPE_TABLE:
 		DMEMIT("%s ", cc->cipher_string);
 
-		if (cc->key_size > 0) {
-			if ((maxlen - sz) < ((cc->key_size << 1) + 1))
-				return -ENOMEM;
-
-			crypt_encode_key(result + sz, cc->key, cc->key_size);
-			sz += cc->key_size << 1;
-		} else {
-			if (sz >= maxlen)
-				return -ENOMEM;
-			result[sz++] = '-';
-		}
+		if (cc->key_size > 0)
+			for (i = 0; i < cc->key_size; i++)
+				DMEMIT("%02x", cc->key[i]);
+		else
+			DMEMIT("-");
 
 		DMEMIT(" %llu %s %llu", (unsigned long long)cc->iv_offset,
 				cc->dev->name, (unsigned long long)cc->start);
@@ -1775,7 +1755,6 @@ static int crypt_status(struct dm_target
 
 		break;
 	}
-	return 0;
 }
 
 static void crypt_postsuspend(struct dm_target *ti)
drivers/md/dm-delay.c +2 -4
@@ -294,8 +294,8 @@ static int delay_map(struct dm_target *t
 	return delay_bio(dc, dc->read_delay, bio);
 }
 
-static int delay_status(struct dm_target *ti, status_type_t type,
-			char *result, unsigned maxlen)
+static void delay_status(struct dm_target *ti, status_type_t type,
+			 char *result, unsigned maxlen)
 {
 	struct delay_c *dc = ti->private;
 	int sz = 0;
@@ -315,8 +315,6 @@ static int delay_status(struct dm_target
 			       dc->write_delay);
 		break;
 	}
-
-	return 0;
 }
 
 static int delay_iterate_devices(struct dm_target *ti,
drivers/md/dm-flakey.c +2 -3
@@ -332,8 +332,8 @@ static int flakey_end_io(struct dm_targe
 	return error;
 }
 
-static int flakey_status(struct dm_target *ti, status_type_t type,
-			 char *result, unsigned int maxlen)
+static void flakey_status(struct dm_target *ti, status_type_t type,
+			  char *result, unsigned int maxlen)
 {
 	unsigned sz = 0;
 	struct flakey_c *fc = ti->private;
@@ -363,7 +363,6 @@ static int flakey_status(struct dm_targe
 
 		break;
 	}
-	return 0;
 }
 
 static int flakey_ioctl(struct dm_target *ti, unsigned int cmd, unsigned long arg)
drivers/md/dm-ioctl.c +11 -7
@@ -1066,6 +1066,7 @@ static void retrieve_status(struct dm_ta
 	num_targets = dm_table_get_num_targets(table);
 	for (i = 0; i < num_targets; i++) {
 		struct dm_target *ti = dm_table_get_target(table, i);
+		size_t l;
 
 		remaining = len - (outptr - outbuf);
 		if (remaining <= sizeof(struct dm_target_spec)) {
@@ -1089,15 +1090,18 @@ static void retrieve_status(struct dm_ta
 		}
 
 		/* Get the status/table string from the target driver */
-		if (ti->type->status) {
-			if (ti->type->status(ti, type, outptr, remaining)) {
-				param->flags |= DM_BUFFER_FULL_FLAG;
-				break;
-			}
-		} else
+		if (ti->type->status)
+			ti->type->status(ti, type, outptr, remaining);
+		else
 			outptr[0] = '\0';
 
-		outptr += strlen(outptr) + 1;
+		l = strlen(outptr) + 1;
+		if (l == remaining) {
+			param->flags |= DM_BUFFER_FULL_FLAG;
+			break;
+		}
+
+		outptr += l;
 		used = param->data_start + (outptr - outbuf);
 
 		outptr = align_ptr(outptr);
drivers/md/dm-linear.c +2 -3
@@ -95,8 +95,8 @@ static int linear_map(struct dm_target *
 	return DM_MAPIO_REMAPPED;
 }
 
-static int linear_status(struct dm_target *ti, status_type_t type,
-			 char *result, unsigned int maxlen)
+static void linear_status(struct dm_target *ti, status_type_t type,
+			  char *result, unsigned int maxlen)
 {
 	struct linear_c *lc = (struct linear_c *) ti->private;
 
@@ -110,7 +110,6 @@ static int linear_status(struct dm_targe
 				(unsigned long long)lc->start);
 		break;
 	}
-	return 0;
 }
 
 static int linear_ioctl(struct dm_target *ti, unsigned int cmd,
drivers/md/dm-mpath.c +2 -4
@@ -1343,8 +1343,8 @@ static void multipath_resume(struct dm_t
  *     [priority selector-name num_ps_args [ps_args]*
  *      num_paths num_selector_args [path_dev [selector_args]* ]+ ]+
  */
-static int multipath_status(struct dm_target *ti, status_type_t type,
-			    char *result, unsigned int maxlen)
+static void multipath_status(struct dm_target *ti, status_type_t type,
+			     char *result, unsigned int maxlen)
 {
 	int sz = 0;
 	unsigned long flags;
@@ -1447,8 +1447,6 @@ static int multipath_status(struct dm_ta
 	}
 
 	spin_unlock_irqrestore(&m->lock, flags);
-
-	return 0;
 }
 
 static int multipath_message(struct dm_target *ti, unsigned argc, char **argv)
drivers/md/dm-raid.c +2 -4
@@ -1067,8 +1067,8 @@ static int raid_map(struct dm_target *ti
 	return DM_MAPIO_SUBMITTED;
 }
 
-static int raid_status(struct dm_target *ti, status_type_t type,
-		       char *result, unsigned maxlen)
+static void raid_status(struct dm_target *ti, status_type_t type,
+			char *result, unsigned maxlen)
 {
 	struct raid_set *rs = ti->private;
 	unsigned raid_param_cnt = 1; /* at least 1 for chunksize */
@@ -1203,8 +1203,6 @@ static int raid_status(struct dm_target
 				DMEMIT(" -");
 		}
 	}
-
-	return 0;
 }
 
 static int raid_iterate_devices(struct dm_target *ti, iterate_devices_callout_fn fn, void *data)
drivers/md/dm-raid1.c +2 -4
@@ -1362,8 +1362,8 @@ static char device_status_char(struct mi
 }
 
 
-static int mirror_status(struct dm_target *ti, status_type_t type,
-			 char *result, unsigned int maxlen)
+static void mirror_status(struct dm_target *ti, status_type_t type,
+			  char *result, unsigned int maxlen)
 {
 	unsigned int m, sz = 0;
 	struct mirror_set *ms = (struct mirror_set *) ti->private;
@@ -1398,8 +1398,6 @@ static int mirror_status(struct dm_targe
 		if (ms->features & DM_RAID1_HANDLE_ERRORS)
 			DMEMIT(" 1 handle_errors");
 	}
-
-	return 0;
 }
 
 static int mirror_iterate_devices(struct dm_target *ti,
drivers/md/dm-snap.c +4 -8
@@ -1845,8 +1845,8 @@ static void snapshot_merge_resume(struct
 	start_merge(s);
 }
 
-static int snapshot_status(struct dm_target *ti, status_type_t type,
-			   char *result, unsigned int maxlen)
+static void snapshot_status(struct dm_target *ti, status_type_t type,
+			    char *result, unsigned int maxlen)
 {
 	unsigned sz = 0;
 	struct dm_snapshot *snap = ti->private;
@@ -1892,8 +1892,6 @@ static int snapshot_status(struct dm_tar
 					  maxlen - sz);
 		break;
 	}
-
-	return 0;
 }
 
 static int snapshot_iterate_devices(struct dm_target *ti,
@@ -2148,8 +2146,8 @@ static void origin_resume(struct dm_targ
 	ti->split_io = get_origin_minimum_chunksize(dev->bdev);
 }
 
-static int origin_status(struct dm_target *ti, status_type_t type, char *result,
-			 unsigned int maxlen)
+static void origin_status(struct dm_target *ti, status_type_t type, char *result,
+			  unsigned int maxlen)
 {
 	struct dm_dev *dev = ti->private;
 
@@ -2162,8 +2160,6 @@ static int origin_status(struct dm_targe
 		snprintf(result, maxlen, "%s", dev->name);
 		break;
 	}
-
-	return 0;
 }
 
 static int origin_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
drivers/md/dm-stripe.c +2 -3
@@ -302,8 +302,8 @@ static int stripe_map(struct dm_target *
  *
  */
 
-static int stripe_status(struct dm_target *ti,
-			 status_type_t type, char *result, unsigned int maxlen)
+static void stripe_status(struct dm_target *ti,
+			  status_type_t type, char *result, unsigned int maxlen)
 {
 	struct stripe_c *sc = (struct stripe_c *) ti->private;
 	char buffer[sc->stripes + 1];
@@ -330,7 +330,6 @@ static int stripe_status(struct dm_targe
 			    (unsigned long long)sc->stripe[i].physical_start);
 		break;
 	}
-	return 0;
 }
 
 static int stripe_end_io(struct dm_target *ti, struct bio *bio,
drivers/md/dm-thin.c +47 -29

122 lines not on this page · raw message

drivers/md/dm-verity.c +2 -4
@@ -514,8 +514,8 @@ static int verity_map(struct dm_target *
 /*
  * Status: V (valid) or C (corruption found)
  */
-static int verity_status(struct dm_target *ti, status_type_t type,
-			 char *result, unsigned maxlen)
+static void verity_status(struct dm_target *ti, status_type_t type,
+			  char *result, unsigned maxlen)
 {
 	struct dm_verity *v = ti->private;
 	unsigned sz = 0;
@@ -546,8 +546,6 @@ static int verity_status(struct dm_targe
 				DMEMIT("%02x", v->salt[x]);
 		break;
 	}
-
-	return 0;
 }
 
 static int verity_ioctl(struct dm_target *ti, unsigned cmd,
include/linux/device-mapper.h +2 -2
@@ -72,8 +72,8 @@ typedef void (*dm_postsuspend_fn) (struc
 typedef int (*dm_preresume_fn) (struct dm_target *ti);
 typedef void (*dm_resume_fn) (struct dm_target *ti);
 
-typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type,
-			     char *result, unsigned int maxlen);
+typedef void (*dm_status_fn) (struct dm_target *ti, status_type_t status_type,
+			      char *result, unsigned int maxlen);
 
 typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv);
 
author maintainer
#32 lore raw

PATCH 32/32 blk-core: Fix memory corruption if blkcg_init_queue fails

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit fff4996b7db7955414ac74386efa5e07fd766b50 upstream.

If blkcg_init_queue fails, blk_alloc_queue_node doesn't call bdi_destroy to clean up structures allocated by the backing dev.

------------[ cut here ]------------
WARNING: at lib/debugobjects.c:260 debug_print_object+0x85/0xa0()
ODEBUG: free active (active state 0) object type: percpu_counter hint:           (null)
Modules linked in: dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev ipt_MASQUERADE iptable_nat nf_nat_ipv4 msr nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack lm85 hwmon_vid snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq freq_table mperf sata_svw serverworks kvm_amd ide_core ehci_pci ohci_hcd libata ehci_hcd kvm usbcore tg3 usb_common libphy k10temp pcspkr ptp i2c_piix4 i2c_core evdev microcode hwmon rtc_cmos pps_core e100 skge floppy mii processor button unix
CPU: 0 PID: 2739 Comm: lvchange Tainted: G        W
3.10.15-devel #14
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
 0000000000000009 ffff88023c3c1ae8 ffffffff813c8fd4 ffff88023c3c1b20
 ffffffff810399eb ffff88043d35cd58 ffffffff81651940 ffff88023c3c1bf8
 ffffffff82479d90 0000000000000005 ffff88023c3c1b80 ffffffff81039a67
Call Trace:
 [<ffffffff813c8fd4>] dump_stack+0x19/0x1b
 [<ffffffff810399eb>] warn_slowpath_common+0x6b/0xa0
 [<ffffffff81039a67>] warn_slowpath_fmt+0x47/0x50
 [<ffffffff8122aaaf>] ? debug_check_no_obj_freed+0xcf/0x250
 [<ffffffff81229a15>] debug_print_object+0x85/0xa0
 [<ffffffff8122abe3>] debug_check_no_obj_freed+0x203/0x250
 [<ffffffff8113c4ac>] kmem_cache_free+0x20c/0x3a0
 [<ffffffff811f6709>] blk_alloc_queue_node+0x2a9/0x2c0
 [<ffffffff811f672e>] blk_alloc_queue+0xe/0x10
 [<ffffffffa04c0093>] dm_create+0x1a3/0x530 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6c07>] dev_create+0x57/0x2b0 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6528>] ctl_ioctl+0x268/0x500 [dm_mod]
 [<ffffffff81097662>] ? get_lock_stats+0x22/0x70
 [<ffffffffa04c67ce>] dm_ctl_ioctl+0xe/0x20 [dm_mod]
 [<ffffffff81161aad>] do_vfs_ioctl+0x2ed/0x520
 [<ffffffff8116cfc7>] ? fget_light+0x377/0x4e0
 [<ffffffff81161d2b>] SyS_ioctl+0x4b/0x90
 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
---[ end trace 4b5ff0d55673d986 ]---
------------[ cut here ]------------

This fix should be backported to stable kernels starting with 2.6.37. Note that in the kernels prior to 3.5 the affected code is different, but the bug is still there - bdi_init is called and bdi_destroy isn't.

---
 block/blk-core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
block/blk-core.c +3 -1
@@ -499,7 +499,7 @@ struct request_queue *blk_alloc_queue_no
 		goto fail_id;
 
 	if (blk_throtl_init(q))
-		goto fail_id;
+		goto fail_bdi;
 
 	setup_timer(&q->backing_dev_info.laptop_mode_wb_timer,
 		    laptop_mode_timer_fn, (unsigned long) q);
@@ -524,6 +524,8 @@ struct request_queue *blk_alloc_queue_no
 
 	return q;
 
+fail_bdi:
+	bdi_destroy(&q->backing_dev_info);
 fail_id:
 	ida_simple_remove(&blk_queue_ida, q->id);
 fail_q:
#33 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.4.73 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Dec 8 21:49:13 UTC 2013. Anything received after that time might be too late.

Build results:

	total: 103 pass: 89 skipped: 10 fail: 4

qemu tests all passed.

Results are as expected.
Details are available as usual at http://server.roeck-us.net:8010/builders.

Guenter

author maintainer
#34 lore raw
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.4.73 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Dec 8 21:49:13 UTC 2013. Anything received after that time might be too late.

Quoted 7 lines

Build results:

	total: 103 pass: 89 skipped: 10 fail: 4

qemu tests all passed.

Results are as expected.
Details are available as usual at http://server.roeck-us.net:8010/builders.

Thanks for testing and letting me know.

greg k-h

#35 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.4.73 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Dec 8 21:49:13 UTC 2013. Anything received after that time might be too late.

Quoted 7 lines

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.73-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

patch applied cleanly.
Compile testing - passed
Boot testing - passed
dmesg regression testing - passed
dmesgs look good. No regressions compared to the previous dmesgs for this release. dmesg emerg, crit, alert, err are clean. No regressions in warn.

Test systems

Samsung Series 9 900X4C Intel Corei5 (3.4 and later) HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics Dell OptiPlex 790 Intel(R) Core(TM) i5-2400

-- Shuah

Signature · 4 lines
Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
[email protected] | (970) 672-0658
#36 lore raw
In reply to Greg Kroah-Hartman

At Fri, 6 Dec 2013 13:52:10 -0800,

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.4.73 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Dec 8 21:49:13 UTC 2013. Anything received after that time might be too late.

All 3.4.73-rc1, 3.10.23-rc1, and 3.12.4-rc1 can be built and boot without any problem. Building kernels with these kernels also work fine.

- [NEW] test tool:
https://github.com/satoru-takeuchi/test-linux-stable

- [NEW] test results(kernel .config, ktest config and test log):
http://satoru-takeuchi.org/test-linux-stable/results/<version>-<test datetime>

- Build Machine: debian jessy x86_64
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
memory: 8GB

- Test machine: debian jessy x86_64(KVM guest on the Build Machine)
vCPU: x2
memory: 2GB

Thanks,
Satoru

author maintainer
#37 lore raw
Quoted 21 lines · Satoru Takeuchi

At Fri, 6 Dec 2013 13:52:10 -0800,

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.4.73 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Dec 8 21:49:13 UTC 2013. Anything received after that time might be too late.

All 3.4.73-rc1, 3.10.23-rc1, and 3.12.4-rc1 can be built and boot without any problem. Building kernels with these kernels also work fine.

- [NEW] test tool:
https://github.com/satoru-takeuchi/test-linux-stable

- [NEW] test results(kernel .config, ktest config and test log):
http://satoru-takeuchi.org/test-linux-stable/results/<version>-<test datetime>

Quoted 7 lines

- Build Machine: debian jessy x86_64
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
memory: 8GB

- Test machine: debian jessy x86_64(KVM guest on the Build Machine)
vCPU: x2
memory: 2GB

Wonderful, thanks for testing.

greg k-h