guruplug: Add support for various file systems and features
PATCH 1/1 guruplug: Add support for various file systems and features
Add support for various file systems and features, as found in `sheevaplug.h'. In addition, increase the malloc area size to allow compilation of UbiFS.
--- include/configs/guruplug.h | 16 +++++++++++++++- 1 files changed, 15 insertions(+), 1 deletions(-)
include/configs/guruplug.h +15 -1
@@ -145,7 +145,7 @@/* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 128)/* 128kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* 1 MiB for malloc() */ /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128
@@ -195,4 +195,18 @@#define CONFIG_SYS_ALT_MEMTEST +/* +* File system +*/ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO +#endif /* _CONFIG_GURUPLUG_H */
Signature · 1 line
1.7.0
PATCH 1/1 guruplug: Add support for various file systems and features
Quoted 11 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Ludovic Court?s
Sent: Wednesday, October 06, 2010 3:33 AM
To: u-boot at lists.denx.de
Subject: [U-Boot] [PATCH] guruplug: Add support for various file systems and featuresAdd support for various file systems and features, as found
Hi Ludovic
Thanks for this patch
FYI: The earlier posted patch (tobe applied v2) http://lists.denx.de/pipermail/u-boot/2010-September/078071.html
Addresses this too.
Quoted 2 lines
in `sheevaplug.h'. In addition, increase the malloc area size to allow compilation of UbiFS.
What do you mean here? Do you need more malloc area to use UbiFS on u-boot on this board ?
Regards..
Prafulla . .