Skip to contentSkip to conversation

ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints

PATCH In review Cen Zhang 2 participants 2 messages Jun 18 – Jun 19 Sound

lore
Share & tools
lore

Cen Zhang

author
#0 lore raw

PATCH v3 1/1 ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints

MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A later setup failure can still jump to snd_usb_midi_v2_free(), which currently frees each endpoint and its coherent URB buffers without first stopping the submitted URBs. A completion can then dereference the embedded URB context and endpoint state after they have been freed, or try to resubmit from the stale endpoint.

This was observed as a KASAN slab-use-after-free in input_urb_complete().

The buggy scenario involves two paths, with each column showing the order within that path:

probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.

Make the endpoint destructor follow the same teardown ordering used for disconnect when the endpoint has not already been disconnected: publish ep->disconnected, kill the URBs synchronously, and drain the endpoint before freeing URB buffers and endpoint storage. The guard avoids repeating the stop sequence after the normal snd_usb_midi_v2_disconnect_all() path, while still synchronizing the direct MIDI 2.0 create-error free path.

Validation reproduced this kernel report:

BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
  dump_stack_lvl+0x77/0xb0
  print_report+0xce/0x5f0
  input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
  srso_alias_return_thunk+0x5/0xfbef5
  __virt_addr_valid+0x19f/0x330
  kasan_report+0xe0/0x110
  __usb_hcd_giveback_urb+0x112/0x1d0
  dummy_timer+0xaaa/0x19a0
  lock_is_held_type+0x9a/0x110
  __lock_acquire+0x467/0x28b0
  mark_held_locks+0x40/0x70
  _raw_spin_unlock_irqrestore+0x44/0x60
  lockdep_hardirqs_on_prepare+0xbb/0x1a0
  __hrtimer_run_queues+0x101/0x520
  hrtimer_run_softirq+0xd0/0x130
  handle_softirqs+0x15b/0x670
  __irq_exit_rcu+0xd0/0x170
  irq_exit_rcu+0xe/0x20
  sysvec_apic_timer_interrupt+0x6c/0x80
  asm_sysvec_apic_timer_interrupt+0x1a/0x20
Fixes d9c99876868c ("ALSA: usb-audio: Create UMP blocks from USB MIDI GTBs")
Assisted-by Codex:gpt-5.5
---
 sound/usb/midi2.c | 5 +++++
 1 file changed, 5 insertions(+)
sound/usb/midi2.c +5 -0
index 04aeb9052f13..3ec633291772 100644
@@ -470,6 +470,11 @@ static int create_midi2_endpoint(struct snd_usb_midi2_interface *umidi,
 static void free_midi2_endpoint(struct snd_usb_midi2_endpoint *ep)
 {
 	list_del(&ep->list);
+	if (!ep->disconnected) {
+		ep->disconnected = 1;
+		kill_midi_urbs(ep, false);
+		drain_urb_queue(ep);
+	}
 	free_midi_urbs(ep);
 	kfree(ep);
 }
Signature · 1 line
2.43.0
#1 lore raw
Quoted 57 lines · Cen Zhang

MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A later setup failure can still jump to snd_usb_midi_v2_free(), which currently frees each endpoint and its coherent URB buffers without first stopping the submitted URBs. A completion can then dereference the embedded URB context and endpoint state after they have been freed, or try to resubmit from the stale endpoint.

This was observed as a KASAN slab-use-after-free in input_urb_complete().

The buggy scenario involves two paths, with each column showing the order within that path:

probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.

Make the endpoint destructor follow the same teardown ordering used for disconnect when the endpoint has not already been disconnected: publish ep->disconnected, kill the URBs synchronously, and drain the endpoint before freeing URB buffers and endpoint storage. The guard avoids repeating the stop sequence after the normal snd_usb_midi_v2_disconnect_all() path, while still synchronizing the direct MIDI 2.0 create-error free path.

Validation reproduced this kernel report:

BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
  dump_stack_lvl+0x77/0xb0
  print_report+0xce/0x5f0
  input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
  srso_alias_return_thunk+0x5/0xfbef5
  __virt_addr_valid+0x19f/0x330
  kasan_report+0xe0/0x110
  __usb_hcd_giveback_urb+0x112/0x1d0
  dummy_timer+0xaaa/0x19a0
  lock_is_held_type+0x9a/0x110
  __lock_acquire+0x467/0x28b0
  mark_held_locks+0x40/0x70
  _raw_spin_unlock_irqrestore+0x44/0x60
  lockdep_hardirqs_on_prepare+0xbb/0x1a0
  __hrtimer_run_queues+0x101/0x520
  hrtimer_run_softirq+0xd0/0x130
  handle_softirqs+0x15b/0x670
  __irq_exit_rcu+0xd0/0x170
  irq_exit_rcu+0xe/0x20
  sysvec_apic_timer_interrupt+0x6c/0x80
  asm_sysvec_apic_timer_interrupt+0x1a/0x20
Quoted 3 lines
Fixes d9c99876868c ("ALSA: usb-audio: Create UMP blocks from USB MIDI GTBs")
Assisted-by Codex:gpt-5.5

Applied now. Thanks.

Takashi