arm64: dts: marvell: mcbin: add an stdout-path
Subsystems (3)
PATCH 1/1 arm64: dts: marvell: mcbin: add an stdout-path
This patch adds an stdout-path to the mcbin device tree. This allows to use earlycon.
Signed-off-by Antoine Tenart <[email protected]>
--- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +4 -0
@@ -51,6 +51,10 @@ compatible = "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory at 00000000 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>;
Signature · 1 line
2.13.3
PATCH 1/1 arm64: dts: marvell: mcbin: add an stdout-path
Hi Antoine,
Quoted 4 lines · Antoine Tenart
This patch adds an stdout-path to the mcbin device tree. This allows to use earlycon.
Signed-off-by Antoine Tenart <[email protected]>
Applied on mvebu/dt64
Thanks,
Gregory
Quoted 22 lines
--- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +4
-0@@ -51,6 +51,10 @@ compatible = "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory at 00000000 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>;Signature · 1 line
2.13.3
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com