Skip to contentSkip to conversation

tty: serial: 8250: add optional spinlock arg to serial8250_rx_chars

PATCH In review John Ogness 2 participants 2 messages Jan 22, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 2/4 tty: serial: 8250: add optional spinlock arg to serial8250_rx_chars

serial8250_rx_chars() must be called from interrupt context and with the port lock held. The port lock is released temporarily within that function to call tty_flip_buffer_push(). However, there may be other drivers that need to synchronize the tty_flip_buffer_push() call within serial8250_rx_chars() with other contexts. Since the port lock cannot be used for this synchronization, an optional spinlock argument is added. If non-NULL, this will be locked during the tty_flip_buffer_push() call.

---
patch against next-20160122

 drivers/tty/serial/8250/8250_fsl.c  |    2 +-
 drivers/tty/serial/8250/8250_omap.c |    2 +-
 drivers/tty/serial/8250/8250_port.c |    9 +++++++--
 include/linux/serial_8250.h         |    3 ++-
 4 files changed, 11 insertions(+), 5 deletions(-)
drivers/tty/serial/8250/8250_fsl.c +1 -1
index 910bfee..790868d 100644
@@ -49,7 +49,7 @@ int fsl8250_handle_irq(struct uart_port *port)
 	lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
 
 	if (lsr & (UART_LSR_DR | UART_LSR_BI))
-		lsr = serial8250_rx_chars(up, lsr);
+		lsr = serial8250_rx_chars(up, lsr, NULL);
 
 	serial8250_modem_status(up);
 
drivers/tty/serial/8250/8250_omap.c +1 -1
index a2c0734..6cf3b4f 100644
@@ -1024,7 +1024,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 
 		dma_err = omap_8250_rx_dma(up, iir);
 		if (dma_err) {
-			status = serial8250_rx_chars(up, status);
+			status = serial8250_rx_chars(up, status, NULL);
 			omap_8250_rx_dma(up, 0);
 		}
 	}
drivers/tty/serial/8250/8250_port.c +7 -2
index 8d262bc..e838115 100644
@@ -1418,7 +1418,8 @@ static void serial8250_enable_ms(struct uart_port *port)
  * by this Rx routine.
  */
 unsigned char
-serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr,
+		    spinlock_t *flip_lock)
 {
 	struct uart_port *port = &up->port;
 	unsigned char ch;
@@ -1485,7 +1486,11 @@ ignore_char:
 		lsr = serial_in(up, UART_LSR);
 	} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (--max_count > 0));
 	spin_unlock(&port->lock);
+	if (flip_lock)
+		spin_lock(flip_lock);
 	tty_flip_buffer_push(&port->state->port);
+	if (flip_lock)
+		spin_unlock(flip_lock);
 	spin_lock(&port->lock);
 	return lsr;
 }
@@ -1591,7 +1596,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 			dma_err = up->dma->rx_dma(up, iir);
 
 		if (!up->dma || dma_err)
-			status = serial8250_rx_chars(up, status);
+			status = serial8250_rx_chars(up, status, NULL);
 	}
 	serial8250_modem_status(up);
 	if ((!up->dma || (up->dma && up->dma->tx_err)) &&
include/linux/serial_8250.h +2 -1
index faa0e03..9c814e3 100644
@@ -147,7 +147,8 @@ extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
 extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
 extern int fsl8250_handle_irq(struct uart_port *port);
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
-unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
+unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr,
+				  spinlock_t *flip_lock);
 void serial8250_tx_chars(struct uart_8250_port *up);
 unsigned int serial8250_modem_status(struct uart_8250_port *up);
 void serial8250_init_port(struct uart_8250_port *up);
Signature · 1 line
1.7.10.4
#1 lore raw

Hi John,

Quoted 7 lines · John Ogness

serial8250_rx_chars() must be called from interrupt context and with the port lock held. The port lock is released temporarily within that function to call tty_flip_buffer_push(). However, there may be other drivers that need to synchronize the tty_flip_buffer_push() call within serial8250_rx_chars() with other contexts. Since the port lock cannot be used for this synchronization, an optional spinlock argument is added. If non-NULL, this will be locked during the tty_flip_buffer_push() call.

I removed the port lock drop-claim in serial8250_rx_chars in patch "serial: 8250: Remove low_latency workaround" (Greg has this patch in his inbox but not in next because of the merge window).

IOW, you can drop this patch.

Regards,
Peter Hurley