Skip to contentSkip to conversation

AHCI Add the AHCI SATA feature on the MX53 platforms

PATCH Superseded Richard Zhu 5 participants 17 messages Aug 30, 2011 – Sep 23, 2011

Subsystems (5)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape libata +1 more subsystems

v7 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Richard Zhu

author
#0 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Signed-off-by Richard Zhu <[email protected]>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c             |   19 ++++
 arch/arm/mach-mx5/devices-imx53.h               |    4 +
 arch/arm/plat-mxc/Makefile                      |    1 +
 arch/arm/plat-mxc/ahci_sata.c                   |  104 +++++++++++++++++++++++
 arch/arm/plat-mxc/devices/Kconfig               |    4 +
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-ahci-imx.c   |   66 ++++++++++++++
 arch/arm/plat-mxc/include/mach/ahci_sata.h      |   33 +++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |   10 ++
 9 files changed, 242 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-mxc/ahci_sata.c
 create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
 create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
arch/arm/mach-mx5/clock-mx51-mx53.c +19 -0
index 7f20308..e1fadaf 100644
@@ -1397,6 +1397,22 @@ static struct clk esdhc4_mx53_clk = {
 	.secondary = &esdhc4_ipg_clk,
 };
 
+static struct clk sata_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_max_enable,
+	.enable_reg = MXC_CCM_CCGR4,
+	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+	.disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+	.parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+	.parent = &ahb_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);

@@ -1503,6 +1519,9 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
 };
 
 static void clk_tree_init(void)
arch/arm/mach-mx5/devices-imx53.h +4 -0
index c27fe8b..bcb3af1 100644
@@ -40,3 +40,7 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
 extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 #define imx53_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst;
+#define imx53_add_ahci_imx(id, pdata)   \
+	imx_add_ahci_imx(&imx53_ahci_imx_data, pdata)
arch/arm/plat-mxc/Makefile +1 -0
index d53c35f..cc8e65a 100644
@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI)	+= ahci_sata.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
arch/arm/plat-mxc/ahci_sata.c new file +104 -0

104 lines not on this page · raw message

arch/arm/plat-mxc/devices/Kconfig +4 -0
index bd294ad..f63887b 100644
@@ -76,3 +76,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
 config IMX_HAVE_PLATFORM_SPI_IMX
 	bool
+
+config IMX_HAVE_PLATFORM_AHCI
+	bool
+	default y if ARCH_MX53
arch/arm/plat-mxc/devices/Makefile +1 -0
index b41bf97..e858ad9 100644
@@ -25,3 +25,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
arch/arm/plat-mxc/devices/platform-ahci-imx.c new file +66 -0

66 lines not on this page · raw message

arch/arm/plat-mxc/include/mach/ahci_sata.h new file +33 -0
new file mode 100644
index 0000000..ba297e1
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __PLAT_MXC_AHCI_SATA_H__
+#define __PLAT_MXC_AHCI_SATA_H__
+
+enum {
+	HOST_CAP = 0x00,
+	HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+	HOST_PORTS_IMPL	= 0x0c,
+	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+extern int sata_init(struct device *dev, void __iomem *addr);
+extern void sata_exit(struct device *dev);
+#endif /* __PLAT_MXC_AHCI_SATA_H__ */
arch/arm/plat-mxc/include/mach/devices-common.h +10 -0
index 524538a..f04e063 100644
@@ -301,3 +301,13 @@ struct platform_device *__init imx_add_spi_imx(
 struct platform_device *imx_add_imx_dma(void);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+		const struct imx_ahci_imx_data *data,
+		const struct ahci_platform_data *pdata);
Signature · 1 line
1.7.1
author
#1 lore raw

PATCH v7 2/5 ahci_plt Add the board_ids and pi refer to different features

On imx53 AHCI, soft reset fails with IPMS set when PMP is enabled but SATA HDD/ODD is connected to SATA port, do soft reset again to port 0.
So the 'ahci_pmp_retry_srst_ops' is required when imx53 ahci is present.

Signed-off-by Richard Zhu <[email protected]>
---
 drivers/ata/ahci_platform.c |   44 +++++++++++++++++++++++++++++++++++++-----
 1 files changed, 38 insertions(+), 6 deletions(-)
drivers/ata/ahci_platform.c +38 -6
index 6fef1fa..c03277d 100644
@@ -23,6 +23,41 @@
 #include <linux/ahci_platform.h>
 #include "ahci.h"
 
+enum ahci_type {
+	AHCI,		/* standard platform ahci */
+	IMX53_AHCI,	/* ahci on i.mx53 */
+};
+
+static struct platform_device_id ahci_devtype[] = {
+	{
+		.name = "ahci",
+		.driver_data = AHCI,
+	}, {
+		.name = "imx53-ahci",
+		.driver_data = IMX53_AHCI,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, ahci_devtype);
+
+
+static const struct ata_port_info ahci_port_info[] = {
+	/* by features */
+	[AHCI] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
+	[IMX53_AHCI] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_pmp_retry_srst_ops,
+	},
+};
+
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT("ahci_platform"),
 };

@@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_platform_data *pdata = dev->platform_data;
-	struct ata_port_info pi = {
-		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= ATA_PIO4,
-		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &ahci_ops,
-	};
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct ata_port_info pi = ahci_port_info[id->driver_data];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;

@@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
 		.name = "ahci",
 		.owner = THIS_MODULE,
 	},
+	.id_table	= ahci_devtype,
 };
 
 static int __init ahci_init(void)
Signature · 1 line
1.7.1
author
#2 lore raw

PATCH v7 3/5 MX53 Enable the AHCI SATA on MX53 ARD board

In reply to Richard Zhu
Signed-off-by Richard Zhu <[email protected]>
---
 arch/arm/mach-mx5/board-mx53_ard.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/mach-mx5/board-mx53_ard.c +1 -0
index 76a67c4..f7cbbc0 100644
@@ -234,6 +234,7 @@ static void __init mx53_ard_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
 	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
 	imx_add_gpio_keys(&ard_button_data);
+	imx53_add_ahci_imx(0, NULL);
 }
 
 static void __init mx53_ard_timer_init(void)
Signature · 1 line
1.7.1
author
#3 lore raw

PATCH v7 4/5 MX53 Enable the AHCI SATA on MX53 LOCO board

In reply to Richard Zhu
Signed-off-by Richard Zhu <[email protected]>
---
 arch/arm/mach-mx5/board-mx53_loco.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/mach-mx5/board-mx53_loco.c +1 -0
index 4e1d51d..76a7af7 100644
@@ -273,6 +273,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
 	imx_add_gpio_keys(&loco_button_data);
 	gpio_led_register_device(-1, &mx53loco_leds_data);
+	imx53_add_ahci_imx(0, NULL);
 }
 
 static void __init mx53_loco_timer_init(void)
Signature · 1 line
1.7.1
author
#4 lore raw

PATCH v7 5/5 MX53 Enable the AHCI SATA on MX53 SMD board

In reply to Richard Zhu
Signed-off-by Richard Zhu <[email protected]>
---
 arch/arm/mach-mx5/board-mx53_smd.c |   32 ++++++++++++++++++++++++++++++++
 1 files changed, 32 insertions(+), 0 deletions(-)
arch/arm/mach-mx5/board-mx53_smd.c +32 -0
index bc02894..3005c7c 100644
@@ -26,6 +26,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx53.h>
+#include <mach/ahci_sata.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

@@ -35,6 +36,7 @@
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,

@@ -111,6 +113,35 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static int mx53_smd_sata_init(struct device *dev, void __iomem *addr)
+{
+	int ret;
+
+	/* Enable SATA PWR */
+	ret = gpio_request(MX53_SMD_SATA_PWR_EN, "ahci-sata-pwr");
+	if (ret) {
+		printk(KERN_ERR "failed to get SATA_PWR_EN: %d\n", ret);
+		return ret;
+	}
+	gpio_direction_output(MX53_SMD_SATA_PWR_EN, 1);
+
+	return sata_init(dev, addr);
+}
+
+void mx53_smd_sata_exit(struct device *dev)
+{
+	sata_exit(dev);
+
+	/* Disable SATA PWR */
+	gpio_direction_output(MX53_SMD_SATA_PWR_EN, 0);
+	gpio_free(MX53_SMD_SATA_PWR_EN);
+}
+
+static struct ahci_platform_data sata_data = {
+	.init = mx53_smd_sata_init,
+	.exit = mx53_smd_sata_exit,
+};
+
 static void __init mx53_smd_board_init(void)
 {
 	imx53_soc_init();

@@ -125,6 +156,7 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	imx53_add_ahci_imx(0, &sata_data);
 }
 
 static void __init mx53_smd_timer_init(void)
Signature · 1 line
1.7.1
#5 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

In reply to Richard Zhu

Hi Richard,

again, please use --cover-letter when sending a new series and say what has changed since last time. Otherwise you force reviewers to find out for themselves (which easily makes them ignore the series)

Regards,

Wolfram

Signature · 9 lines
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110830/2c701449/attachment.sig>
#6 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

In reply to Richard Zhu

Hello,

2011/8/30 Richard Zhu <[email protected]>:

Quoted 11 lines
Signed-off-by Richard Zhu <[email protected]>

---

?arch/arm/mach-mx5/clock-mx51-mx53.c ? ? ? ? ? ? | ? 19 ++++
?arch/arm/mach-mx5/devices-imx53.h ? ? ? ? ? ? ? | ? ?4 +
?arch/arm/plat-mxc/Makefile ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
?arch/arm/plat-mxc/ahci_sata.c ? ? ? ? ? ? ? ? ? | ?104 +++++++++++++++++++++++
?arch/arm/plat-mxc/devices/Kconfig ? ? ? ? ? ? ? | ? ?4 +
?arch/arm/plat-mxc/devices/Makefile ? ? ? ? ? ? ?| ? ?1 +
?arch/arm/plat-mxc/devices/platform-ahci-imx.c ? | ? 66 ++++++++++++++
?arch/arm/plat-mxc/include/mach/ahci_sata.h ? ? ?| ? 33 +++++++
?arch/arm/plat-mxc/include/mach/devices-common.h | ? 10 ++
Quoted 4 lines

?9 files changed, 242 insertions(+), 0 deletions(-) ?create mode 100644 arch/arm/plat-mxc/ahci_sata.c ?create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c ?create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h

The good news are that I have tested this patch series on i.MX53 LOCO board and it seems to work fine here. Thanks.

Tested-by Hector Oron Martinez <[email protected]>
Signature · 1 line
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.
author
#7 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Hi Wolfram:
Thanks for your suggestions.
Accepted.

Hi Hector:
Thanks for your help to tests these patches.

Best Regards
Richard Zhu

Quoted 28 lines · Hector Oron

Hello,

2011/8/30 Richard Zhu <[email protected]>:

Quoted 11 lines
Signed-off-by Richard Zhu <[email protected]>

---

?arch/arm/mach-mx5/clock-mx51-mx53.c ? ? ? ? ? ? | ? 19 ++++
?arch/arm/mach-mx5/devices-imx53.h ? ? ? ? ? ? ? | ? ?4 +
?arch/arm/plat-mxc/Makefile ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
?arch/arm/plat-mxc/ahci_sata.c ? ? ? ? ? ? ? ? ? | ?104 +++++++++++++++++++++++
?arch/arm/plat-mxc/devices/Kconfig ? ? ? ? ? ? ? | ? ?4 +
?arch/arm/plat-mxc/devices/Makefile ? ? ? ? ? ? ?| ? ?1 +
?arch/arm/plat-mxc/devices/platform-ahci-imx.c ? | ? 66 ++++++++++++++
?arch/arm/plat-mxc/include/mach/ahci_sata.h ? ? ?| ? 33 +++++++
?arch/arm/plat-mxc/include/mach/devices-common.h | ? 10 ++
Quoted 4 lines

?9 files changed, 242 insertions(+), 0 deletions(-) ?create mode 100644 arch/arm/plat-mxc/ahci_sata.c ?create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c ?create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h

The good news are that I have tested this patch series on i.MX53 LOCO board and it seems to work fine here. Thanks.

Tested-by Hector Oron Martinez <[email protected]>

--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.

#8 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Hello,

2011/8/31 Richard Zhu <[email protected]>:

Quoted 2 lines

Hi Hector:
Thanks for your help to tests these patches.

Note I rebased this patches against 'imx-features' branch on Sascha's tree. I am noticing some obscure (to me) messages from kernel:

[    6.874694] Adding 9767516k swap on /dev/sda3.  Priority:-1
extents:1 across:9767516k
[    7.073106] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.708399] ata1.00: exception Emask 0x12 SAct 0x3 SErr 0x1280500
action 0x6 frozen
[    7.716219] ata1.00: irq_stat 0x08000000, interface fatal error
[    7.722216] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns }
[    7.728780] ata1.00: failed command: READ FPDMA QUEUED
[    7.733995] ata1.00: cmd 60/00:00:f2:11:32/01:00:00:00:00/40 tag 0
ncq 131072 in
[    7.734002]          res 40/00:04:f2:11:32/00:00:00:00:00/40 Emask
0x12 (ATA bus error)
[    7.749468] ata1.00: status: { DRDY }
[    7.753176] ata1.00: failed command: READ FPDMA QUEUED
[    7.758356] ata1.00: cmd 60/18:08:c2:14:32/00:00:00:00:00/40 tag 1
ncq 12288 in
[    7.758363]          res 40/00:04:f2:11:32/00:00:00:00:00/40 Emask
0x12 (ATA bus error)
[    7.773739] ata1.00: status: { DRDY }
[    7.777448] ata1: hard resetting link
[    8.750427] ata1: softreset failed (device not ready)
[    8.755551] ata1: applying PMP SRST workaround and retrying
[    8.960435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.981938] ata1.00: configured for UDMA/133
[    8.986535] ata1: EH complete
[   12.147912] eth0: Freescale FEC PHY driver [Generic PHY]
(mii_bus:phy_addr=1:00, irq=-1)
[   12.521870] ata1.00: exception Emask 0x12 SAct 0xf SErr 0x800500
action 0x6 frozen
[   12.529518] ata1.00: irq_stat 0x08000000, interface fatal error
[   12.535546] ata1: SError: { UnrecovData Proto LinkSeq }
[   12.540851] ata1.00: failed command: READ FPDMA QUEUED
[   12.546039] ata1.00: cmd 60/00:00:a2:19:2c/01:00:00:00:00/40 tag 0
ncq 131072 in
[   12.546046]          res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask
0x12 (ATA bus error)
[   12.561519] ata1.00: status: { DRDY }
[   12.565209] ata1.00: failed command: READ FPDMA QUEUED
[   12.570419] ata1.00: cmd 60/00:08:1a:e9:2c/01:00:00:00:00/40 tag 1
ncq 131072 in
[   12.570426]          res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask
0x12 (ATA bus error)
[   12.585890] ata1.00: status: { DRDY }
[   12.589578] ata1.00: failed command: READ FPDMA QUEUED
[   12.594776] ata1.00: cmd 60/00:10:7a:aa:2c/01:00:00:00:00/40 tag 2
ncq 131072 in
[   12.594783]          res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask
0x12 (ATA bus error)
[   12.610240] ata1.00: status: { DRDY }
[   12.613945] ata1.00: failed command: READ FPDMA QUEUED
[   12.619118] ata1.00: cmd 60/e0:18:1a:10:2c/00:00:00:00:00/40 tag 3
ncq 114688 in
[   12.619125]          res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask
0x12 (ATA bus error)
[   12.634583] ata1.00: status: { DRDY }
[   12.638292] ata1: hard resetting link
[   13.790424] ata1: softreset failed (device not ready)
[   13.795543] ata1: applying PMP SRST workaround and retrying
[   14.000437] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   14.021749] ata1.00: configured for UDMA/133
[   14.026836] ata1: EH complete
[   14.140774] PHY: 1:00 - Link is Up - 100/Full

Best regards,

Signature · 1 line
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.
author
#9 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Hi Hector:
What's happen before "> [ 7.073106] EXT4-fs (sda2): re-mounted.
Opts: errors=remount-ro"?
I re-based the patches to Sascha's imx-features branch, my sata device can work. Test sw environment: Sascha's imx-features branch,
Test hw environment: iMX53 loco board, 32G sandisk ssd, tftp download the kernel image,
and the nfs type rootfs is mounted.

loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci imx53-ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode ahci imx53-ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc scsi0 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 28 FEC Ethernet Driver
fec_enet_mii_bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
input: mma8450 as /devices/virtual/input/input0
i2c /dev entries driver
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: no vmmc regulator found
mmc0: SDHCI controller on sdhci-esdhc-imx53.0 [sdhci-esdhc-imx53.0] using DMA
mmc1: no vmmc regulator found
mmc1: SDHCI controller on sdhci-esdhc-imx53.2 [sdhci-esdhc-imx53.2] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
input: gpio-keys as /devices/platform/gpio-keys/input/input1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=1:00, irq=-1)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address 0001
mmcblk0: mmc0:0001 00000 3.79 GiB
mmcblk0: p1 p2 p3
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD 8.00, max UDMA/133 ata1.00: 62533296 sectors, multi 1: LBA48
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 SSD PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
PHY: 1:00 - Link is Up - 100/Full
Sending DHCP requests ., OK

Best Regards
Richard Zhu

Quoted 77 lines · Hector Oron

Hello,

2011/8/31 Richard Zhu <[email protected]>:

Quoted 2 lines

Hi Hector:
Thanks for your help to tests these patches.

Note I rebased this patches against 'imx-features' branch on Sascha's tree. I am noticing some obscure (to me) messages from kernel:

[ ? ?6.874694] Adding 9767516k swap on /dev/sda3. ?Priority:-1 extents:1 across:9767516k
[ ? ?7.073106] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ ? ?7.708399] ata1.00: exception Emask 0x12 SAct 0x3 SErr 0x1280500 action 0x6 frozen
[ ? ?7.716219] ata1.00: irq_stat 0x08000000, interface fatal error [ ? ?7.722216] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns } [ ? ?7.728780] ata1.00: failed command: READ FPDMA QUEUED
[ ? ?7.733995] ata1.00: cmd 60/00:00:f2:11:32/01:00:00:00:00/40 tag 0 ncq 131072 in
[ ? ?7.734002] ? ? ? ? ?res 40/00:04:f2:11:32/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? ?7.749468] ata1.00: status: { DRDY }
[ ? ?7.753176] ata1.00: failed command: READ FPDMA QUEUED
[ ? ?7.758356] ata1.00: cmd 60/18:08:c2:14:32/00:00:00:00:00/40 tag 1 ncq 12288 in
[ ? ?7.758363] ? ? ? ? ?res 40/00:04:f2:11:32/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? ?7.773739] ata1.00: status: { DRDY }
[ ? ?7.777448] ata1: hard resetting link
[ ? ?8.750427] ata1: softreset failed (device not ready)
[ ? ?8.755551] ata1: applying PMP SRST workaround and retrying [ ? ?8.960435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ ? ?8.981938] ata1.00: configured for UDMA/133
[ ? ?8.986535] ata1: EH complete
[ ? 12.147912] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
[ ? 12.521870] ata1.00: exception Emask 0x12 SAct 0xf SErr 0x800500 action 0x6 frozen
[ ? 12.529518] ata1.00: irq_stat 0x08000000, interface fatal error [ ? 12.535546] ata1: SError: { UnrecovData Proto LinkSeq }
[ ? 12.540851] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.546039] ata1.00: cmd 60/00:00:a2:19:2c/01:00:00:00:00/40 tag 0 ncq 131072 in
[ ? 12.546046] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.561519] ata1.00: status: { DRDY }
[ ? 12.565209] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.570419] ata1.00: cmd 60/00:08:1a:e9:2c/01:00:00:00:00/40 tag 1 ncq 131072 in
[ ? 12.570426] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.585890] ata1.00: status: { DRDY }
[ ? 12.589578] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.594776] ata1.00: cmd 60/00:10:7a:aa:2c/01:00:00:00:00/40 tag 2 ncq 131072 in
[ ? 12.594783] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.610240] ata1.00: status: { DRDY }
[ ? 12.613945] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.619118] ata1.00: cmd 60/e0:18:1a:10:2c/00:00:00:00:00/40 tag 3 ncq 114688 in
[ ? 12.619125] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.634583] ata1.00: status: { DRDY }
[ ? 12.638292] ata1: hard resetting link
[ ? 13.790424] ata1: softreset failed (device not ready)
[ ? 13.795543] ata1: applying PMP SRST workaround and retrying [ ? 14.000437] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ ? 14.021749] ata1.00: configured for UDMA/133
[ ? 14.026836] ata1: EH complete
[ ? 14.140774] PHY: 1:00 - Link is Up - 100/Full

Best regards,
--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.

#10 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Hi Hector,

I don't have this issue either. Could you verify it's caused by something else? You may try a different SSD.

- eric

Quoted 149 lines · Richard Zhu

Hi Hector:
What's happen before "> [ ? ?7.073106] EXT4-fs (sda2): re-mounted.
Opts: errors=remount-ro"?
I re-based the patches to Sascha's imx-features branch, my sata device can work. Test sw environment: ?Sascha's imx-features branch,
Test hw environment: iMX53 loco board, 32G sandisk ssd, tftp download the kernel image,
?and the nfs type rootfs is mounted.

loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci imx53-ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode ahci imx53-ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc scsi0 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 28 FEC Ethernet Driver
fec_enet_mii_bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
input: mma8450 as /devices/virtual/input/input0
i2c /dev entries driver
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: no vmmc regulator found
mmc0: SDHCI controller on sdhci-esdhc-imx53.0 [sdhci-esdhc-imx53.0] using DMA
mmc1: no vmmc regulator found
mmc1: SDHCI controller on sdhci-esdhc-imx53.2 [sdhci-esdhc-imx53.2] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
input: gpio-keys as /devices/platform/gpio-keys/input/input1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=1:00, irq=-1)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address 0001
mmcblk0: mmc0:0001 00000 3.79 GiB
?mmcblk0: p1 p2 p3
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD 8.00, max UDMA/133 ata1.00: 62533296 sectors, multi 1: LBA48
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ? ? ATA ? ? ?SanDisk SSD P4 3 SSD ?PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
?sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
PHY: 1:00 - Link is Up - 100/Full
Sending DHCP requests ., OK

Best Regards
Richard Zhu

Quoted 73 lines · Hector Oron

Hello,

2011/8/31 Richard Zhu <[email protected]>:

Quoted 2 lines

Hi Hector:
Thanks for your help to tests these patches.

Note I rebased this patches against 'imx-features' branch on Sascha's tree. I am noticing some obscure (to me) messages from kernel:

[ ? ?6.874694] Adding 9767516k swap on /dev/sda3. ?Priority:-1 extents:1 across:9767516k
[ ? ?7.073106] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ ? ?7.708399] ata1.00: exception Emask 0x12 SAct 0x3 SErr 0x1280500 action 0x6 frozen
[ ? ?7.716219] ata1.00: irq_stat 0x08000000, interface fatal error [ ? ?7.722216] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns } [ ? ?7.728780] ata1.00: failed command: READ FPDMA QUEUED
[ ? ?7.733995] ata1.00: cmd 60/00:00:f2:11:32/01:00:00:00:00/40 tag 0 ncq 131072 in
[ ? ?7.734002] ? ? ? ? ?res 40/00:04:f2:11:32/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? ?7.749468] ata1.00: status: { DRDY }
[ ? ?7.753176] ata1.00: failed command: READ FPDMA QUEUED
[ ? ?7.758356] ata1.00: cmd 60/18:08:c2:14:32/00:00:00:00:00/40 tag 1 ncq 12288 in
[ ? ?7.758363] ? ? ? ? ?res 40/00:04:f2:11:32/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? ?7.773739] ata1.00: status: { DRDY }
[ ? ?7.777448] ata1: hard resetting link
[ ? ?8.750427] ata1: softreset failed (device not ready)
[ ? ?8.755551] ata1: applying PMP SRST workaround and retrying [ ? ?8.960435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ ? ?8.981938] ata1.00: configured for UDMA/133
[ ? ?8.986535] ata1: EH complete
[ ? 12.147912] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
[ ? 12.521870] ata1.00: exception Emask 0x12 SAct 0xf SErr 0x800500 action 0x6 frozen
[ ? 12.529518] ata1.00: irq_stat 0x08000000, interface fatal error [ ? 12.535546] ata1: SError: { UnrecovData Proto LinkSeq }
[ ? 12.540851] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.546039] ata1.00: cmd 60/00:00:a2:19:2c/01:00:00:00:00/40 tag 0 ncq 131072 in
[ ? 12.546046] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.561519] ata1.00: status: { DRDY }
[ ? 12.565209] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.570419] ata1.00: cmd 60/00:08:1a:e9:2c/01:00:00:00:00/40 tag 1 ncq 131072 in
[ ? 12.570426] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.585890] ata1.00: status: { DRDY }
[ ? 12.589578] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.594776] ata1.00: cmd 60/00:10:7a:aa:2c/01:00:00:00:00/40 tag 2 ncq 131072 in
[ ? 12.594783] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.610240] ata1.00: status: { DRDY }
[ ? 12.613945] ata1.00: failed command: READ FPDMA QUEUED
[ ? 12.619118] ata1.00: cmd 60/e0:18:1a:10:2c/00:00:00:00:00/40 tag 3 ncq 114688 in
[ ? 12.619125] ? ? ? ? ?res 40/00:14:7a:aa:2c/00:00:00:00:00/40 Emask 0x12 (ATA bus error)
[ ? 12.634583] ata1.00: status: { DRDY }
[ ? 12.638292] ata1: hard resetting link
[ ? 13.790424] ata1: softreset failed (device not ready)
[ ? 13.795543] ata1: applying PMP SRST workaround and retrying [ ? 14.000437] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ ? 14.021749] ata1.00: configured for UDMA/133
[ ? 14.026836] ata1: EH complete
[ ? 14.140774] PHY: 1:00 - Link is Up - 100/Full

Quoted 4 lines

Best regards,
--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#11 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

In reply to Richard Zhu

Hi,

2011/9/1 Richard Zhu <[email protected]>:

Quoted 3 lines

Hi Hector:
What's happen before "> [ ? ?7.073106] EXT4-fs (sda2): re-mounted.
Opts: errors=remount-ro"?

Here is my complete dmesg. The system seems to work fine, it is a 1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected to mx53 LOCO with eSATA-to-SATA cable. I have around a Lacie eSATA disk which I might attempt to connect.

Linux version 3.1.0-rc3-mx5 (zumbi at enorme) (gcc version 4.4.5 (Debian 4.4.5-8) ) #7 Tue Aug 30 13:17:14 BST 2011
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale MX53 LOCO Board
Ignoring RAM at b0000000-cfffffff (vmalloc region overlap). Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c0461e08, node_mem_map c04b2000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 130048 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttymxc0,115200 console=tty1 root=/dev/sda2 video=mxcdi1fb:GBR24,XGA di1_primary tve printk.time=1

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 514948k/514948k available, 9340k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf4000000   ( 312 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0412000   (4136 kB)
[    0.000000]       .init : 0xc0412000 - 0xc0437000   ( 148 kB)
[    0.000000]       .data : 0xc0438000 - 0xc0462480   ( 170 kB)
[    0.000000]        .bss : 0xc04624a4 - 0xc04b1380   ( 316 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.000000] NR_IRQS:400
[    0.000000] TrustZone Interrupt Controller (TZIC) initialized
[    0.000000] CPU identified as i.MX53, silicon rev 2.1
[    0.000000] sched_clock: 32 bits at 55MHz, resolution 18ns, wraps
every 77386ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000556] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.040182] pid_max: default: 32768 minimum: 301
[    0.040450] Mount-cache hash table entries: 512
[    0.041059] CPU: Testing write buffer coherency: ok
[    0.042459] devtmpfs: initialized
[    0.044791] print_constraints: dummy:
[    0.045120] NET: Registered protocol family 16
[    0.065856] bio: create slab <bio-0> at 0
[    0.067168] SCSI subsystem initialized
[    0.067580] libata version 3.00 loaded.
[    0.067989] usbcore: registered new interface driver usbfs
[    0.068174] usbcore: registered new interface driver hub
[    0.068488] usbcore: registered new device driver usb
[    0.070182] Switching to clocksource mxc_timer1
[    0.080403] Switched to NOHz mode on CPU #0
[    0.088737] NET: Registered protocol family 2
[    0.089034] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.089503] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[    0.089861] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.090067] TCP: Hash tables configured (established 16384 bind 16384)
[    0.090096] TCP reno registered
[    0.090128] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.090168] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.090626] NET: Registered protocol family 1
[    0.091318] RPC: Registered named UNIX socket transport module.
[    0.091381] RPC: Registered udp transport module.
[    0.091407] RPC: Registered tcp transport module.
[    0.091429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.115113] VFS: Disk quotas dquot_6.5.2
[    0.115483] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.120839] fuse init (API version 7.16)
[    0.121919] msgmni has been set to 1005
[    0.122544] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[    0.122618] io scheduler noop registered
[    0.122646] io scheduler deadline registered
[    0.122920] io scheduler cfq registered (default)
[    0.123527] Serial: IMX driver
[    0.123787] imx21-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX
[    0.489212] console [ttymxc0] enabled
[    0.502624] brd: module loaded
[    0.511401] loop: module loaded
[    0.515060] nbd: registered device at major 43
[    0.532271] ahci: SSS flag set, parallel bus scan disabled
[    0.537878] ahci imx53-ahci.0: AHCI 0001.0100 32 slots 1 ports 3
Gbps 0x1 impl platform mode
[    0.546452] ahci imx53-ahci.0: flags: ncq sntf stag pm led clo only
pmp pio slum part ccc
[    0.556008] scsi0 : ahci_platform
[    0.560052] ata1: SATA max UDMA/133 mmio [mem
0x10000000-0x10000fff] port 0x100 irq 28
[    0.568788] FEC Ethernet Driver
[    0.575892] fec_enet_mii_bus: probed
[    0.580170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.587109] Initializing USB Mass Storage driver...
[    0.592309] usbcore: registered new interface driver usb-storage
[    0.598353] USB Mass Storage support registered.
[    0.603499] mousedev: PS/2 mouse device common for all mice
[    0.609483] i2c /dev entries driver
[    0.614322] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled.
timeout=60s (nowayout=0)
[    0.623615] device-mapper: uevent: version 1.0.3
[    0.629223] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06)
initialised: dm-devel at redhat.com
[    0.637827] sdhci: Secure Digital Host Controller Interface driver
[    0.644080] sdhci: Copyright(c) Pierre Ossman
[    0.648461] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.654585] mmc0: no vmmc regulator found
[    0.658808] Registered led device: mmc0::
[    0.659016] mmc0: SDHCI controller on sdhci-esdhc-imx53.0
[sdhci-esdhc-imx53.0] using DMA
[    0.667691] mmc1: no vmmc regulator found
[    0.672020] Registered led device: mmc1::
[    0.672265] mmc1: SDHCI controller on sdhci-esdhc-imx53.2
[sdhci-esdhc-imx53.2] using DMA
[    0.681037] usbcore: registered new interface driver usbhid
[    0.686655] usbhid: USB HID core driver
[    0.790254] TCP cubic registered
[    0.793596] NET: Registered protocol family 17
[    0.798190] Registering the dns_resolver key type
[    0.803078] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 2
[    0.813279] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    0.820805] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    0.863099] mmc0: host does not support reading read-only switch.
assuming write-enable.
[    0.970967] mmc0: new SD card at address 1234
[    1.540405] ata1: softreset failed (device not ready)
[    1.545514] ata1: applying PMP SRST workaround and retrying
[    1.750408] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.764169] ata1.00: ATA-8: WDC WD10TPVT-00U4RT1, 01.01A01, max UDMA/133
[    1.770981] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.786154] ata1.00: configured for UDMA/133
[    1.791272] scsi 0:0:0:0: Direct-Access     ATA      WDC
WD10TPVT-00U 01.0 PQ: 0 ANSI: 5
[    1.800460] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[    1.808190] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.815016] sd 0:0:0:0: [sda] Write Protect is off
[    1.819878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.820201] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    1.856631]  sda: sda1 sda2 sda3 sda4
[    1.863666] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.880189] EXT3-fs (sda2): error: couldn't mount because of
unsupported optional features (240)
[    1.890482] EXT2-fs (sda2): error: couldn't mount because of
unsupported optional features (240)
[    1.932146] EXT4-fs (sda2): warning: maximal mount count reached,
running e2fsck is recommended
[    1.959428] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[    1.967300] VFS: Mounted root (ext4 filesystem) on device 8:2.
[    1.989215] devtmpfs: mounted
[    1.992660] Freeing init memory: 148K
[    3.913577] udev[67]: starting version 164
[    4.877589] mmcblk0: mmc0:1234 SA02G 1.83 GiB
[    5.040661]  mmcblk0: p1 p2 p3
[    6.847039] Adding 9767516k swap on /dev/sda3.  Priority:-1
extents:1 across:9767516k
[    6.987841] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   13.647889] kjournald starting.  Commit interval 5 seconds
[   13.654619] EXT3-fs (dm-0): using internal journal
[   13.659490] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[   15.143077] eth0: Freescale FEC PHY driver [Generic PHY]
(mii_bus:phy_addr=1:00, irq=-1)
[   17.140873] PHY: 1:00 - Link is Up - 100/Full
[   17.329274] kjournald starting.  Commit interval 5 seconds
[   17.335840] EXT3-fs (dm-3): using internal journal
[   17.340799] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[   33.313977] sshd (855): /proc/855/oom_adj is deprecated, please use
/proc/855/oom_score_adj instead.
[ 3867.337774] kjournald starting.  Commit interval 5 seconds
[ 3867.344328] EXT3-fs (dm-7): using internal journal
[ 3867.349195] EXT3-fs (dm-7): mounted filesystem with ordered data mode
[ 3882.857122] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280501
action 0x6 frozen
[ 3882.864931] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3882.870928] ata1: SError: { RecovData UnrecovData Proto 10B8B
BadCRC TrStaTrns }
[ 3882.878367] ata1.00: failed command: READ FPDMA QUEUED
[ 3882.883582] ata1.00: cmd 60/c8:00:d0:8a:c4/00:00:0f:00:00/40 tag 0
ncq 102400 in
[ 3882.883590]          res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3882.899063] ata1.00: status: { DRDY }
[ 3882.902802] ata1: hard resetting link
[ 3883.870400] ata1: softreset failed (device not ready)
[ 3883.875515] ata1: applying PMP SRST workaround and retrying
[ 3884.080465] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3884.102097] ata1.00: configured for UDMA/133
[ 3884.106635] ata1: EH complete
[ 3934.010542] ata1.00: exception Emask 0x0 SAct 0xff SErr 0x0 action 0x6 frozen
[ 3934.017759] ata1.00: failed command: READ FPDMA QUEUED
[ 3934.023030] ata1.00: cmd 60/88:00:18:66:c7/00:00:0f:00:00/40 tag 0
ncq 69632 in
[ 3934.023037]          res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x4 (timeout)
[ 3934.038014] ata1.00: status: { DRDY }
[ 3934.041769] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.047042] ata1.00: cmd 61/38:08:d8:2c:5a/00:00:12:00:00/40 tag 1
ncq 28672 out
[ 3934.047051]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.062081] ata1.00: status: { DRDY }
[ 3934.065782] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.071103] ata1.00: cmd 61/20:10:90:67:90/00:00:09:00:00/40 tag 2
ncq 16384 out
[ 3934.071113]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.085984] ata1.00: status: { DRDY }
[ 3934.089671] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.094963] ata1.00: cmd 61/08:18:40:a7:8e/00:00:09:00:00/40 tag 3
ncq 4096 out
[ 3934.094971]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.109735] ata1.00: status: { DRDY }
[ 3934.113450] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.118711] ata1.00: cmd 61/08:20:40:27:8f/00:00:09:00:00/40 tag 4
ncq 4096 out
[ 3934.118721]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.133489] ata1.00: status: { DRDY }
[ 3934.137172] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.142457] ata1.00: cmd 61/08:28:40:67:8f/00:00:09:00:00/40 tag 5
ncq 4096 out
[ 3934.142465]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.157251] ata1.00: status: { DRDY }
[ 3934.160972] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.166239] ata1.00: cmd 61/08:30:40:a7:8f/00:00:09:00:00/40 tag 6
ncq 4096 out
[ 3934.166245]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.181013] ata1.00: status: { DRDY }
[ 3934.184700] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.189959] ata1.00: cmd 61/60:38:4a:f3:e1/00:00:02:00:00/40 tag 7
ncq 49152 out
[ 3934.189966]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.204822] ata1.00: status: { DRDY }
[ 3934.208535] ata1: hard resetting link
[ 3935.180443] ata1: softreset failed (device not ready)
[ 3935.185548] ata1: applying PMP SRST workaround and retrying
[ 3935.390417] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3935.412020] ata1.00: configured for UDMA/133
[ 3935.416479] ata1.00: device reported invalid CHS sector 0
[ 3935.421985] ata1.00: device reported invalid CHS sector 0
[ 3935.427424] ata1.00: device reported invalid CHS sector 0
[ 3935.432893] ata1.00: device reported invalid CHS sector 0
[ 3935.438326] ata1.00: device reported invalid CHS sector 0
[ 3935.443788] ata1.00: device reported invalid CHS sector 0
[ 3935.449221] ata1.00: device reported invalid CHS sector 0
[ 3935.454728] ata1: EH complete
[ 3950.155859] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x80500
action 0x6 frozen
[ 3950.163510] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3950.169469] ata1: SError: { UnrecovData Proto 10B8B }
[ 3950.174597] ata1.00: failed command: READ FPDMA QUEUED
[ 3950.179788] ata1.00: cmd 60/00:00:28:97:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3950.179796]          res 40/00:04:28:97:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3950.195275] ata1.00: status: { DRDY }
[ 3950.198992] ata1: hard resetting link
[ 3951.380403] ata1: softreset failed (device not ready)
[ 3951.385523] ata1: applying PMP SRST workaround and retrying
[ 3951.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3951.612472] ata1.00: configured for UDMA/133
[ 3951.617042] ata1: EH complete
[ 3952.305676] ata1: limiting SATA link speed to 1.5 Gbps
[ 3952.310994] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280500
action 0x6 frozen
[ 3952.318692] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3952.324685] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns }
[ 3952.331283] ata1.00: failed command: READ FPDMA QUEUED
[ 3952.336469] ata1.00: cmd 60/00:00:28:9f:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3952.336477]          res 40/00:04:28:9f:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3952.351953] ata1.00: status: { DRDY }
[ 3952.355667] ata1: hard resetting link
[ 3953.360414] ata1: softreset failed (device not ready)
[ 3953.365537] ata1: applying PMP SRST workaround and retrying
[ 3953.570412] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3953.592363] ata1.00: configured for UDMA/133
[ 3953.596938] ata1: EH complete
[ 4479.040495] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 4479.047622] ata1.00: failed command: WRITE FPDMA QUEUED
[ 4479.052947] ata1.00: cmd 61/10:08:4a:f9:e1/00:00:02:00:00/40 tag 1
ncq 8192 out
[ 4479.052955]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 4479.067740] ata1.00: status: { DRDY }
[ 4479.071480] ata1: hard resetting link
[ 4480.040403] ata1: softreset failed (device not ready)
[ 4480.045513] ata1: applying PMP SRST workaround and retrying
[ 4480.250423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4480.272519] ata1.00: configured for UDMA/133
[ 4480.276866] ata1.00: device reported invalid CHS sector 0
[ 4480.282410] ata1: EH complete
[52367.370517] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x280100
action 0x6 frozen
[52367.378167] ata1.00: irq_stat 0x08000000, interface fatal error
[52367.384188] ata1: SError: { UnrecovData 10B8B BadCRC }
[52367.389366] ata1.00: failed command: READ FPDMA QUEUED
[52367.394582] ata1.00: cmd 60/00:00:fa:c6:36/02:00:00:00:00/40 tag 0
ncq 262144 in
[52367.394592]          res 40/00:04:fa:c6:36/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[52367.410065] ata1.00: status: { DRDY }
[52367.413800] ata1: hard resetting link
[52368.380402] ata1: softreset failed (device not ready)
[52368.385506] ata1: applying PMP SRST workaround and retrying
[52368.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52368.612592] ata1.00: configured for UDMA/133
[52368.617347] ata1: EH complete

Best regards,

Signature · 1 line
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.
#12 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Quoted 10 lines · Hector Oron

Hi,

2011/9/1 Richard Zhu <[email protected]>:

Quoted 3 lines

Hi Hector:
What's happen before "> [ ? ?7.073106] EXT4-fs (sda2): re-mounted.
Opts: errors=remount-ro"?

Here is my complete dmesg. The system seems to work fine, it is a 1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected to mx53 LOCO with eSATA-to-SATA cable.

Is it possible that it's caused by this converter? Do you have a separate SATA power supply that could help test the disk directly connected to mx53loco?

Quoted 335 lines

I have around a Lacie eSATA
disk which I might attempt to connect.

Linux version 3.1.0-rc3-mx5 (zumbi at enorme) (gcc version 4.4.5 (Debian 4.4.5-8) ) #7 Tue Aug 30 13:17:14 BST 2011
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale MX53 LOCO Board
Ignoring RAM at b0000000-cfffffff (vmalloc region overlap). Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c0461e08, node_mem_map c04b2000 ?Normal zone: 1024 pages used for memmap
?Normal zone: 0 pages reserved
?Normal zone: 130048 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. ?Total pages: 130048 Kernel command line: console=ttymxc0,115200 console=tty1 root=/dev/sda2 video=mxcdi1fb:GBR24,XGA di1_primary tve ?printk.time=1 [ ? ?0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ ? ?0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ ? ?0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ ? ?0.000000] Memory: 512MB = 512MB total
[ ? ?0.000000] Memory: 514948k/514948k available, 9340k reserved, 0K highmem [ ? ?0.000000] Virtual kernel memory layout:
[ ? ?0.000000] ? ? vector ?: 0xffff0000 - 0xffff1000 ? ( ? 4 kB) [ ? ?0.000000] ? ? fixmap ?: 0xfff00000 - 0xfffe0000 ? ( 896 kB) [ ? ?0.000000] ? ? DMA ? ? : 0xffc00000 - 0xffe00000 ? ( ? 2 MB) [ ? ?0.000000] ? ? vmalloc : 0xe0800000 - 0xf4000000 ? ( 312 MB) [ ? ?0.000000] ? ? lowmem ?: 0xc0000000 - 0xe0000000 ? ( 512 MB) [ ? ?0.000000] ? ? modules : 0xbf000000 - 0xc0000000 ? ( ?16 MB) [ ? ?0.000000] ? ? ? .text : 0xc0008000 - 0xc0412000 ? (4136 kB) [ ? ?0.000000] ? ? ? .init : 0xc0412000 - 0xc0437000 ? ( 148 kB) [ ? ?0.000000] ? ? ? .data : 0xc0438000 - 0xc0462480 ? ( 170 kB) [ ? ?0.000000] ? ? ? ?.bss : 0xc04624a4 - 0xc04b1380 ? ( 316 kB) [ ? ?0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ ? ?0.000000] NR_IRQS:400
[ ? ?0.000000] TrustZone Interrupt Controller (TZIC) initialized [ ? ?0.000000] CPU identified as i.MX53, silicon rev 2.1
[ ? ?0.000000] sched_clock: 32 bits at 55MHz, resolution 18ns, wraps every 77386ms
[ ? ?0.000000] Console: colour dummy device 80x30
[ ? ?0.000000] console [tty1] enabled
[ ? ?0.000556] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) [ ? ?0.040182] pid_max: default: 32768 minimum: 301
[ ? ?0.040450] Mount-cache hash table entries: 512
[ ? ?0.041059] CPU: Testing write buffer coherency: ok
[ ? ?0.042459] devtmpfs: initialized
[ ? ?0.044791] print_constraints: dummy:
[ ? ?0.045120] NET: Registered protocol family 16
[ ? ?0.065856] bio: create slab <bio-0> at 0
[ ? ?0.067168] SCSI subsystem initialized
[ ? ?0.067580] libata version 3.00 loaded.
[ ? ?0.067989] usbcore: registered new interface driver usbfs
[ ? ?0.068174] usbcore: registered new interface driver hub
[ ? ?0.068488] usbcore: registered new device driver usb
[ ? ?0.070182] Switching to clocksource mxc_timer1
[ ? ?0.080403] Switched to NOHz mode on CPU #0
[ ? ?0.088737] NET: Registered protocol family 2
[ ? ?0.089034] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ ? ?0.089503] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ ? ?0.089861] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ ? ?0.090067] TCP: Hash tables configured (established 16384 bind 16384) [ ? ?0.090096] TCP reno registered
[ ? ?0.090128] UDP hash table entries: 256 (order: 0, 4096 bytes) [ ? ?0.090168] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ ? ?0.090626] NET: Registered protocol family 1
[ ? ?0.091318] RPC: Registered named UNIX socket transport module. [ ? ?0.091381] RPC: Registered udp transport module.
[ ? ?0.091407] RPC: Registered tcp transport module.
[ ? ?0.091429] RPC: Registered tcp NFSv4.1 backchannel transport module. [ ? ?0.115113] VFS: Disk quotas dquot_6.5.2
[ ? ?0.115483] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ ? ?0.120839] fuse init (API version 7.16)
[ ? ?0.121919] msgmni has been set to 1005
[ ? ?0.122544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ ? ?0.122618] io scheduler noop registered
[ ? ?0.122646] io scheduler deadline registered
[ ? ?0.122920] io scheduler cfq registered (default)
[ ? ?0.123527] Serial: IMX driver
[ ? ?0.123787] imx21-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX [ ? ?0.489212] console [ttymxc0] enabled
[ ? ?0.502624] brd: module loaded
[ ? ?0.511401] loop: module loaded
[ ? ?0.515060] nbd: registered device at major 43
[ ? ?0.532271] ahci: SSS flag set, parallel bus scan disabled
[ ? ?0.537878] ahci imx53-ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ ? ?0.546452] ahci imx53-ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc
[ ? ?0.556008] scsi0 : ahci_platform
[ ? ?0.560052] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 28
[ ? ?0.568788] FEC Ethernet Driver
[ ? ?0.575892] fec_enet_mii_bus: probed
[ ? ?0.580170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ ? ?0.587109] Initializing USB Mass Storage driver...
[ ? ?0.592309] usbcore: registered new interface driver usb-storage [ ? ?0.598353] USB Mass Storage support registered.
[ ? ?0.603499] mousedev: PS/2 mouse device common for all mice
[ ? ?0.609483] i2c /dev entries driver
[ ? ?0.614322] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ ? ?0.623615] device-mapper: uevent: version 1.0.3
[ ? ?0.629223] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06)
initialised: dm-devel at redhat.com
[ ? ?0.637827] sdhci: Secure Digital Host Controller Interface driver [ ? ?0.644080] sdhci: Copyright(c) Pierre Ossman
[ ? ?0.648461] sdhci-pltfm: SDHCI platform and OF driver helper
[ ? ?0.654585] mmc0: no vmmc regulator found
[ ? ?0.658808] Registered led device: mmc0::
[ ? ?0.659016] mmc0: SDHCI controller on sdhci-esdhc-imx53.0 [sdhci-esdhc-imx53.0] using DMA
[ ? ?0.667691] mmc1: no vmmc regulator found
[ ? ?0.672020] Registered led device: mmc1::
[ ? ?0.672265] mmc1: SDHCI controller on sdhci-esdhc-imx53.2 [sdhci-esdhc-imx53.2] using DMA
[ ? ?0.681037] usbcore: registered new interface driver usbhid
[ ? ?0.686655] usbhid: USB HID core driver
[ ? ?0.790254] TCP cubic registered
[ ? ?0.793596] NET: Registered protocol family 17
[ ? ?0.798190] Registering the dns_resolver key type
[ ? ?0.803078] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ ? ?0.813279] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ ? ?0.820805] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ ? ?0.863099] mmc0: host does not support reading read-only switch. assuming write-enable.
[ ? ?0.970967] mmc0: new SD card at address 1234
[ ? ?1.540405] ata1: softreset failed (device not ready)
[ ? ?1.545514] ata1: applying PMP SRST workaround and retrying
[ ? ?1.750408] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ ? ?1.764169] ata1.00: ATA-8: WDC WD10TPVT-00U4RT1, 01.01A01, max UDMA/133 [ ? ?1.770981] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ ? ?1.786154] ata1.00: configured for UDMA/133
[ ? ?1.791272] scsi 0:0:0:0: Direct-Access ? ? ATA ? ? ?WDC WD10TPVT-00U 01.0 PQ: 0 ANSI: 5
[ ? ?1.800460] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ ? ?1.808190] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ ? ?1.815016] sd 0:0:0:0: [sda] Write Protect is off
[ ? ?1.819878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ ? ?1.820201] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ ? ?1.856631] ?sda: sda1 sda2 sda3 sda4
[ ? ?1.863666] sd 0:0:0:0: [sda] Attached SCSI disk
[ ? ?1.880189] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ ? ?1.890482] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ ? ?1.932146] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ ? ?1.959428] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ ? ?1.967300] VFS: Mounted root (ext4 filesystem) on device 8:2. [ ? ?1.989215] devtmpfs: mounted
[ ? ?1.992660] Freeing init memory: 148K
[ ? ?3.913577] udev[67]: starting version 164
[ ? ?4.877589] mmcblk0: mmc0:1234 SA02G 1.83 GiB
[ ? ?5.040661] ?mmcblk0: p1 p2 p3
[ ? ?6.847039] Adding 9767516k swap on /dev/sda3. ?Priority:-1 extents:1 across:9767516k
[ ? ?6.987841] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ ? 13.647889] kjournald starting. ?Commit interval 5 seconds
[ ? 13.654619] EXT3-fs (dm-0): using internal journal
[ ? 13.659490] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ ? 15.143077] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
[ ? 17.140873] PHY: 1:00 - Link is Up - 100/Full
[ ? 17.329274] kjournald starting. ?Commit interval 5 seconds
[ ? 17.335840] EXT3-fs (dm-3): using internal journal
[ ? 17.340799] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ ? 33.313977] sshd (855): /proc/855/oom_adj is deprecated, please use /proc/855/oom_score_adj instead.

[ 3867.337774] kjournald starting. ?Commit interval 5 seconds
[ 3867.344328] EXT3-fs (dm-7): using internal journal
[ 3867.349195] EXT3-fs (dm-7): mounted filesystem with ordered data mode
[ 3882.857122] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280501
action 0x6 frozen
[ 3882.864931] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3882.870928] ata1: SError: { RecovData UnrecovData Proto 10B8B
BadCRC TrStaTrns }
[ 3882.878367] ata1.00: failed command: READ FPDMA QUEUED
[ 3882.883582] ata1.00: cmd 60/c8:00:d0:8a:c4/00:00:0f:00:00/40 tag 0
ncq 102400 in
[ 3882.883590] ? ? ? ? ?res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3882.899063] ata1.00: status: { DRDY }
[ 3882.902802] ata1: hard resetting link
[ 3883.870400] ata1: softreset failed (device not ready)
[ 3883.875515] ata1: applying PMP SRST workaround and retrying
[ 3884.080465] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3884.102097] ata1.00: configured for UDMA/133
[ 3884.106635] ata1: EH complete
[ 3934.010542] ata1.00: exception Emask 0x0 SAct 0xff SErr 0x0 action 0x6 frozen
[ 3934.017759] ata1.00: failed command: READ FPDMA QUEUED
[ 3934.023030] ata1.00: cmd 60/88:00:18:66:c7/00:00:0f:00:00/40 tag 0
ncq 69632 in
[ 3934.023037] ? ? ? ? ?res 40/00:04:d0:8a:c4/00:00:0f:00:00/40 Emask
0x4 (timeout)
[ 3934.038014] ata1.00: status: { DRDY }
[ 3934.041769] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.047042] ata1.00: cmd 61/38:08:d8:2c:5a/00:00:12:00:00/40 tag 1
ncq 28672 out
[ 3934.047051] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.062081] ata1.00: status: { DRDY }
[ 3934.065782] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.071103] ata1.00: cmd 61/20:10:90:67:90/00:00:09:00:00/40 tag 2
ncq 16384 out
[ 3934.071113] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.085984] ata1.00: status: { DRDY }
[ 3934.089671] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.094963] ata1.00: cmd 61/08:18:40:a7:8e/00:00:09:00:00/40 tag 3
ncq 4096 out
[ 3934.094971] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.109735] ata1.00: status: { DRDY }
[ 3934.113450] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.118711] ata1.00: cmd 61/08:20:40:27:8f/00:00:09:00:00/40 tag 4
ncq 4096 out
[ 3934.118721] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.133489] ata1.00: status: { DRDY }
[ 3934.137172] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.142457] ata1.00: cmd 61/08:28:40:67:8f/00:00:09:00:00/40 tag 5
ncq 4096 out
[ 3934.142465] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.157251] ata1.00: status: { DRDY }
[ 3934.160972] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.166239] ata1.00: cmd 61/08:30:40:a7:8f/00:00:09:00:00/40 tag 6
ncq 4096 out
[ 3934.166245] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.181013] ata1.00: status: { DRDY }
[ 3934.184700] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3934.189959] ata1.00: cmd 61/60:38:4a:f3:e1/00:00:02:00:00/40 tag 7
ncq 49152 out
[ 3934.189966] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 3934.204822] ata1.00: status: { DRDY }
[ 3934.208535] ata1: hard resetting link
[ 3935.180443] ata1: softreset failed (device not ready)
[ 3935.185548] ata1: applying PMP SRST workaround and retrying
[ 3935.390417] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3935.412020] ata1.00: configured for UDMA/133
[ 3935.416479] ata1.00: device reported invalid CHS sector 0
[ 3935.421985] ata1.00: device reported invalid CHS sector 0
[ 3935.427424] ata1.00: device reported invalid CHS sector 0
[ 3935.432893] ata1.00: device reported invalid CHS sector 0
[ 3935.438326] ata1.00: device reported invalid CHS sector 0
[ 3935.443788] ata1.00: device reported invalid CHS sector 0
[ 3935.449221] ata1.00: device reported invalid CHS sector 0
[ 3935.454728] ata1: EH complete
[ 3950.155859] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x80500
action 0x6 frozen
[ 3950.163510] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3950.169469] ata1: SError: { UnrecovData Proto 10B8B }
[ 3950.174597] ata1.00: failed command: READ FPDMA QUEUED
[ 3950.179788] ata1.00: cmd 60/00:00:28:97:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3950.179796] ? ? ? ? ?res 40/00:04:28:97:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3950.195275] ata1.00: status: { DRDY }
[ 3950.198992] ata1: hard resetting link
[ 3951.380403] ata1: softreset failed (device not ready)
[ 3951.385523] ata1: applying PMP SRST workaround and retrying
[ 3951.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3951.612472] ata1.00: configured for UDMA/133
[ 3951.617042] ata1: EH complete
[ 3952.305676] ata1: limiting SATA link speed to 1.5 Gbps
[ 3952.310994] ata1.00: exception Emask 0x12 SAct 0x1 SErr 0x1280500
action 0x6 frozen
[ 3952.318692] ata1.00: irq_stat 0x08000000, interface fatal error
[ 3952.324685] ata1: SError: { UnrecovData Proto 10B8B BadCRC TrStaTrns }
[ 3952.331283] ata1.00: failed command: READ FPDMA QUEUED
[ 3952.336469] ata1.00: cmd 60/00:00:28:9f:71/01:00:0f:00:00/40 tag 0
ncq 131072 in
[ 3952.336477] ? ? ? ? ?res 40/00:04:28:9f:71/00:00:0f:00:00/40 Emask
0x12 (ATA bus error)
[ 3952.351953] ata1.00: status: { DRDY }
[ 3952.355667] ata1: hard resetting link
[ 3953.360414] ata1: softreset failed (device not ready)
[ 3953.365537] ata1: applying PMP SRST workaround and retrying
[ 3953.570412] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3953.592363] ata1.00: configured for UDMA/133
[ 3953.596938] ata1: EH complete
[ 4479.040495] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 4479.047622] ata1.00: failed command: WRITE FPDMA QUEUED
[ 4479.052947] ata1.00: cmd 61/10:08:4a:f9:e1/00:00:02:00:00/40 tag 1
ncq 8192 out
[ 4479.052955] ? ? ? ? ?res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 4479.067740] ata1.00: status: { DRDY }
[ 4479.071480] ata1: hard resetting link
[ 4480.040403] ata1: softreset failed (device not ready)
[ 4480.045513] ata1: applying PMP SRST workaround and retrying
[ 4480.250423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4480.272519] ata1.00: configured for UDMA/133
[ 4480.276866] ata1.00: device reported invalid CHS sector 0
[ 4480.282410] ata1: EH complete
[52367.370517] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x280100
action 0x6 frozen
[52367.378167] ata1.00: irq_stat 0x08000000, interface fatal error
[52367.384188] ata1: SError: { UnrecovData 10B8B BadCRC }
[52367.389366] ata1.00: failed command: READ FPDMA QUEUED
[52367.394582] ata1.00: cmd 60/00:00:fa:c6:36/02:00:00:00:00/40 tag 0
ncq 262144 in
[52367.394592] ? ? ? ? ?res 40/00:04:fa:c6:36/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[52367.410065] ata1.00: status: { DRDY }
[52367.413800] ata1: hard resetting link
[52368.380402] ata1: softreset failed (device not ready)
[52368.385506] ata1: applying PMP SRST workaround and retrying
[52368.590410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52368.612592] ata1.00: configured for UDMA/133
[52368.617347] ata1: EH complete

Best regards,
--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#13 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Hello,

Apologies for late reply.

2011/9/6 Eric Miao <[email protected]>:

Quoted 10 lines · Hector Oron
Quoted 5 lines

2011/9/1 Richard Zhu <[email protected]>:

Here is my complete dmesg. The system seems to work fine, it is a 1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected to mx53 LOCO with eSATA-to-SATA cable.

Is it possible that it's caused by this converter? Do you have a separate SATA power supply that could help test the disk directly connected to mx53loco?

I think I had a bad configuration setup for my kernel. I have rebuilt 3.1.0-rc6 from Sascha's master git with this patches and now SATA is working properly I do not see any issue as I did. So, from my side all is OK now, and I assume I had some missing or conflicting module setup.

Kind regards and apologies for inconveniences,

Signature · 1 line
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.
#14 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

Quoted 16 lines · Hector Oron

Hello,

?Apologies for late reply.

2011/9/6 Eric Miao <[email protected]>:

Quoted 10 lines · Hector Oron
Quoted 5 lines

2011/9/1 Richard Zhu <[email protected]>:

Here is my complete dmesg. The system seems to work fine, it is a 1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected to mx53 LOCO with eSATA-to-SATA cable.

Is it possible that it's caused by this converter? Do you have a separate SATA power supply that could help test the disk directly connected to mx53loco?

Quoted 7 lines

I think I had a bad configuration setup for my kernel. I have rebuilt 3.1.0-rc6 from Sascha's master git with this patches and now SATA is working properly I do not see any issue as I did. So, from my side all is OK now, and I assume I had some missing or conflicting module setup.

Kind regards and apologies for inconveniences,

That's great, Herton. Can we take it as a Tested-by?

Quoted 8 lines

--
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#16 lore raw

PATCH v7 1/5 AHCI Add the AHCI SATA feature on the MX53 platforms

In reply to Hector Oron
Quoted 1 line · Hector Oron

Hello,

Hi,

Quoted 7 lines

2011/8/31 Richard Zhu <[email protected]>:

Quoted 2 lines

Hi Hector:
Thanks for your help to tests these patches.

Note I rebased this patches against 'imx-features' branch on Sascha's tree. I am noticing some obscure (to me) messages from kernel:

Currently testing with probably same checkout of imx-features branch with a sata 3.5" drive. Running badblocks in non destructive write mode and so far, so good (it's slow but it may comes from my drive).

Did you test if there was a bad cable or faulty drive PSU ?

Arnaud