arm64: dts: marvell: change regulator-gpio to regulator-fixed
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 arm64: dts: marvell: change regulator-gpio to regulator-fixed
A "regulator-gpio" must have a GPIO control, hence the name. There's no GPIO on a couple of Marvell platforms at least as far as the DT is defined, so change the regulator type from GPIO to fixed.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts | 9 ++------- arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi | 3 ++- 2 files changed, 4 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +2 -7
@@ -26,16 +26,11 @@ memory@0 { }; vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; + compatible = "regulator-fixed"; regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; - - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; }; keys {
arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi +2 -1
@@ -15,8 +15,9 @@ / { }; &ap0_reg_sd_vccq { + compatible = "regulator-fixed"; regulator-max-microvolt = <1800000>; - states = <1800000 0x1 1800000 0x0>; + /delete-property/ states; /delete-property/ gpios; };
Signature · 1 line
2.51.0
Gregory CLEMENT
maintainerQuoted 5 lines · Rob Herring (Arm)
A "regulator-gpio" must have a GPIO control, hence the name. There's no GPIO on a couple of Marvell platforms at least as far as the DT is defined, so change the regulator type from GPIO to fixed.
Signed-off-by Rob Herring (Arm) <[email protected]>
Applied on mvebu/dt64
Thanks,
Gregory
Quoted 46 lines
--- arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts | 9 ++------- arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi | 3 ++- 2 files changed, 4 insertions(+), 8 deletions(-)arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +2
-7@@ -26,16 +26,11 @@ memory@0 { }; vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; + compatible = "regulator-fixed"; regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; - - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; }; keys {arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi +2
-1@@ -15,8 +15,9 @@ / { }; &ap0_reg_sd_vccq { + compatible = "regulator-fixed"; regulator-max-microvolt = <1800000>; - states = <1800000 0x1 1800000 0x0>; + /delete-property/ states; /delete-property/ gpios; };Signature · 1 line
2.51.0
Signature · 3 lines
Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com