ALSA: line6: correct midi status byte when receiving data from podxt
PATCH 1/2 ALSA: line6: correct midi status byte when receiving data from podxt
A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0 status byte. This is usually corrected by the driver on other OSes.
This fixes MIDI sysex messages sent by PODxt.
--- sound/usb/line6/driver.c | 3 ++- sound/usb/line6/midi.c | 3 ++- sound/usb/line6/midibuf.c | 25 +++++++++++++++++-------- sound/usb/line6/midibuf.h | 5 ++++- sound/usb/line6/pod.c | 3 ++- 5 files changed, 27 insertions(+), 12 deletions(-)
sound/usb/line6/driver.c +2 -1
@@ -304,7 +304,8 @@ static void line6_data_received(struct urb *urb)for (;;) { done =line6_midibuf_read (mb, line6->buffer_message, -LINE6_MIDI_MESSAGE_MAXLEN ); +LINE6_MIDI_MESSAGE_MAXLEN , +LINE6_MIDIBUF_READ_RX );if (done <=0 )break ;
sound/usb/line6/midi.c +2 -1
@@ -56,7 +56,8 @@ static void line6_midi_transmit(struct snd_rawmidi_substream *substream)for (;;) { done =line6_midibuf_read (mb, chunk, -LINE6_FALLBACK_MAXPACKETSIZE ); +LINE6_FALLBACK_MAXPACKETSIZE , +LINE6_MIDIBUF_READ_TX );if (done ==0 )break ;
sound/usb/line6/midibuf.c +17 -8
@@ -9,6 +9,7 @@#include "midibuf.h" +static int midibuf_message_length (unsigned char code) {int message_length;
@@ -20,12 +21,7 @@ static int midibuf_message_length(unsigned char code) message_length = length[(code >>4 ) -8 ]; }else { -/* -Note that according to the MIDI specification 0xf2 is -the "Song Position Pointer", but this is used by Line 6 -to send sysex messages to the host. -*/ -static const int length[] = {-1 ,2 ,-1 ,2 ,-1 ,-1 ,1 ,1 ,1 ,1 , +static const int length[] = {-1 ,2 ,2 ,2 ,-1 ,-1 ,1 ,1 ,1 ,-1 ,1 ,1 ,1 ,-1 ,1 ,1 }; message_length = length[code &0x0f ];
@@ -125,7 +121,7 @@ int line6_midibuf_write(struct midi_buffer *this, unsigned char *data, }int line6_midibuf_read (struct midi_buffer *this,unsigned char *data, -int length) +int length,int read_type) {int bytes_used;int length1, length2;
@@ -148,9 +144,22 @@ int line6_midibuf_read(struct midi_buffer *this, unsigned char *data, length1 = this->size - this->pos_read; -/* check MIDI command length */ command = this->buf[this->pos_read]; +/* +PODxt always has status byte lower nibble set to 0010, +when it means to send 0000, so we correct if here so +that control/program changes come on channel 1 and +sysex message status byte is correct +*/ +if (read_type ==LINE6_MIDIBUF_READ_RX ) { +if (command ==0xb2 || command ==0xc2 || command ==0xf2 ) { +unsigned char fixed = command &0xf0 ; + this->buf[this->pos_read] = fixed; + command = fixed; + } + } +/* check MIDI command length */ if (command &0x80 ) { midi_length =midibuf_message_length (command); this->command_prev = command;
sound/usb/line6/midibuf.h +4 -1
@@ -8,6 +8,9 @@ #ifndef MIDIBUF_H #define MIDIBUF_H +#define LINE6_MIDIBUF_READ_TX 0 +#define LINE6_MIDIBUF_READ_RX 1 + struct midi_buffer { unsigned char *buf; int size;
@@ -23,7 +26,7 @@ extern void line6_midibuf_destroy(struct midi_buffer *mb);extern int line6_midibuf_ignore (struct midi_buffer *mb,int length);extern int line6_midibuf_init (struct midi_buffer *mb,int size,int split);extern int line6_midibuf_read (struct midi_buffer *mb,unsigned char *data, -int length); +int length,int read_type);extern void line6_midibuf_reset (struct midi_buffer *mb);extern int line6_midibuf_write (struct midi_buffer *mb,unsigned char *data,int length);
sound/usb/line6/pod.c +2 -1
@@ -159,8 +159,9 @@ static struct line6_pcm_properties pod_pcm_properties = { .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */ }; +static const char pod_version_header[] = { -0xf2 ,0x7e ,0x7f ,0x06 ,0x02 +0xf0 ,0x7e ,0x7f ,0x06 ,0x02 }; static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
Signature · 1 line
2.38.1
PATCH 2/2 ALSA: line6: fix stack overflow in line6_midi_transmit
Correctly calculate available space including the size of the chunk buffer. This fixes a buffer overflow when multiple MIDI sysex messages are sent to a PODxt device.
--- sound/usb/line6/midi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/usb/line6/midi.c +2 -1
@@ -44,7 +44,8 @@ static void line6_midi_transmit(struct snd_rawmidi_substream *substream)int req, done;for (;;) { - req =min (line6_midibuf_bytes_free (mb), line6->max_packet_size); + req =min3 (line6_midibuf_bytes_free (mb), line6->max_packet_size, +LINE6_FALLBACK_MAXPACKETSIZE ); done =snd_rawmidi_transmit_peek (substream, chunk, req);if (done ==0 )
Signature · 1 line
2.38.1
Takashi Iwai
AppliedQuoted 8 lines · Artem Egorkine
A PODxt device sends
0xb2,0xc2or0xf2as a status byte for MIDI messages over USB that should otherwise have a0xb0,0xc0or0xf0status byte. This is usually corrected by the driver on other OSes.This fixes MIDI sysex messages sent by PODxt.
Signed-off-by Artem Egorkine <[email protected]>
Applied both patches now. Thanks!
Takashi