target/arm: Treat unknown SMC calls as NOP
PATCH 1/1 target/arm: Treat unknown SMC calls as NOP
We currently treat unknown SMC calls as UNDEF. This behavior is different from KVM, which treats them as NOP.
Unfortunately, the UNDEF exception breaks running Windows for ARM in QEMU, as that probes an OEM SMCCC call on boot, but does not expect to receive an UNDEF exception as response.
So instead, let's follow the KVM path and ignore SMC calls that we don't handle. This fixes booting the Windows 10 for ARM preview in TCG for me.
--- target/arm/helper.c | 8 ++++++++ target/arm/op_helper.c | 13 ++++--------- 2 files changed, 12 insertions(+), 9 deletions(-)
target/arm/helper.c +8 -0
@@ -9778,6 +9778,14 @@ void arm_cpu_do_interrupt(CPUState *cs)return ; } +if (cs->exception_index ==EXCP_SMC && + !arm_feature (env,ARM_FEATURE_EL3 ) && + cpu->psci_conduit !=QEMU_PSCI_CONDUIT_SMC ) { +/* Treat unknown SMC calls as NOP, just like KVM */ +qemu_log_mask (CPU_LOG_INT ,"...handled as NOP\n" ); +return ; + } +/* * Semihosting semantics depend on the register width of the code * that caused the exception, not the target exception level, so
target/arm/op_helper.c +4 -9
@@ -823,7 +823,7 @@ void HELPER(pre_smc)(CPUARMState *env, uint32_t syndrome)* * Conduit SMC, valid call Trap to EL2 PSCI Call * Conduit SMC, inval call Trap to EL2 Undef insn -* Conduit not SMC Undef insn Undef insn +* Conduit not SMC nop nop */ /* On ARMv8 with EL3 AArch64, SMD applies to both S and NS state.
@@ -838,16 +838,11 @@ void HELPER(pre_smc)(CPUARMState *env, uint32_t syndrome)if (!arm_feature (env,ARM_FEATURE_EL3 ) && cpu->psci_conduit !=QEMU_PSCI_CONDUIT_SMC ) { -/* If we have no EL3 then SMC always UNDEFs and can't be -* trapped to EL2. PSCI-via-SMC is a sort of ersatz EL3 -* firmware within QEMU, and we want an EL2 guest to be able -* to forbid its EL1 from making PSCI calls into QEMU's -* "firmware" via HCR.TSC, so for these purposes treat -* PSCI-via-SMC as implying an EL3. +/* If we have no EL3 then we simulate KVM behavior which +* simply treats every unknown SMC as a nop. * This handles the very last line of the previous table. */ -raise_exception (env,EXCP_UDEF ,syn_uncategorized (), -exception_target_el (env)); +return ; }if (cur_el ==1 && (arm_hcr_el2_eff (env) &HCR_TSC )) {
Signature · 1 line
2.16.4
Quoted 13 lines · Alexander Graf
We currently treat unknown SMC calls as UNDEF. This behavior is different from KVM, which treats them as NOP.
Unfortunately, the UNDEF exception breaks running Windows for ARM in QEMU, as that probes an OEM SMCCC call on boot, but does not expect to receive an UNDEF exception as response.
So instead, let's follow the KVM path and ignore SMC calls that we don't handle. This fixes booting the Windows 10 for ARM preview in TCG for me.
Signed-off-by Alexander Graf <[email protected]>
target/arm/helper.c void arm_cpu_do_interrupt(CPUState *cs) · line 9783
Quoted 3 lines
target/arm/helper.c +3
-0+if (cs->exception_index ==EXCP_SMC && + !arm_feature (env,ARM_FEATURE_EL3 ) && + cpu->psci_conduit !=QEMU_PSCI_CONDUIT_SMC ) {
This condition says: "we got an SMC, and this CPU doesn't have EL3, and we're not imitating real EL3 firmware". The architecturally correct behaviour here (since we don't implement nested-virt yet, which might allow it to trap to guest EL2) is to UNDEF, as far as I can see from a quick look at the AArch64.CheckForSMCUndefOrTrap().
I'm not sure why KVM makes these NOP; if I'm right about the architectural behaviour then making them NOP would be a KVM bug.
If Windows makes an SMC call on boot that seems like a guest
bug: it would crash on a real CPU without EL2/EL3 as well.
* Conduit SMC, valid call Trap to EL2 PSCI Call
* Conduit SMC, inval call Trap to EL2 Undef insn
- * Conduit not SMC Undef insn Undef insn
+ * Conduit not SMC nop nopThe line in this table that your commit message says you're fixing is "Conduit SMC, inval call"; the line your code change affects is "Conduit not SMC", which is not the same thing. (I'd have to look at the PSCI spec to see what it requires for SMCs that aren't valid PSCI calls.)
thanks
-- PMM
Quoted 11 lines · Peter Maydell
Quoted 10 lines · Alexander Graf
We currently treat unknown SMC calls as UNDEF. This behavior is different from KVM, which treats them as NOP.
Unfortunately, the UNDEF exception breaks running Windows for ARM in QEMU, as that probes an OEM SMCCC call on boot, but does not expect to receive an UNDEF exception as response.
So instead, let's follow the KVM path and ignore SMC calls that we don't handle. This fixes booting the Windows 10 for ARM preview in TCG for me.
Quoted 6 lines
target/arm/helper.c void arm_cpu_do_interrupt(CPUState *cs) · line 9783
Quoted 4 lines
Signed-off-by Alexander Graf <[email protected]>target/arm/helper.c +3
-0+if (cs->exception_index ==EXCP_SMC && + !arm_feature (env,ARM_FEATURE_EL3 ) && + cpu->psci_conduit !=QEMU_PSCI_CONDUIT_SMC ) {This condition says: "we got an SMC, and this CPU doesn't have EL3, and we're not imitating real EL3 firmware".
I like to think of it as "This CPU exposes an environment that looks like KVM, so it implements HVC calls (EL2) and is responsible for handling SMC calls as well.
The main difference between the two semantics is that in yours, you don't have EL3. In mine, there is an EL3, but it's virtualized by the same layer that implements EL2.
Quoted 10 lines
The architecturally correct behaviour here (since we don't implement nested-virt yet, which might allow it to trap to guest EL2) is to UNDEF, as far as I can see from a quick look at the
AArch64.CheckForSMCUndefOrTrap().I'm not sure why KVM makes these NOP; if I'm right about the architectural behaviour then making them NOP would be a KVM bug.
If Windows makes an SMC call on boot that seems like a guest
bug: it would crash on a real CPU without EL2/EL3 as well.
I don't think there can be a real SBBR compatible CPU without EL2/EL3, because PSCI is a base requirement. That means either SMC calls succeed (Windows running in EL2) or SMC calls are trapped into EL2 and it's up to the hypervisor to decide what to do with them.
Quoted 11 lines
* Conduit SMC, valid call Trap to EL2 PSCI Call * Conduit SMC, inval call Trap to EL2 Undef insntarget/arm/op_helper.c +1
-1-* Conduit not SMC Undef insn Undef insn +* Conduit not SMC nop nop The line in this table that your commit message says you're fixing is "Conduit SMC, inval call"; the line your code change affects is "Conduit not SMC", which is not the same thing. (I'd have to look at the PSCI spec to see what it requires for SMCs that aren't valid PSCI calls.)
The patch fixes the default environment, which is "Conduit HVC, PSCI over HVC implemented by QEMU". If the patch description wasn't clear, I'm happy to reword it :).
Alex
Quoted 16 lines · Alexander Graf
Quoted 15 lines · Peter Maydell
Quoted 14 lines · Alexander Graf
We currently treat unknown SMC calls as UNDEF. This behavior is different from KVM, which treats them as NOP.
Unfortunately, the UNDEF exception breaks running Windows for ARM in QEMU, as that probes an OEM SMCCC call on boot, but does not expect to receive an UNDEF exception as response.
So instead, let's follow the KVM path and ignore SMC calls that we don't handle. This fixes booting the Windows 10 for ARM preview in TCG for me.
Signed-off-by Alexander Graf <[email protected]>target/arm/helper.c +3
-0+if (cs->exception_index ==EXCP_SMC && + !arm_feature (env,ARM_FEATURE_EL3 ) && + cpu->psci_conduit !=QEMU_PSCI_CONDUIT_SMC ) {
Quoted 7 lines
Quoted 2 lines
This condition says: "we got an SMC, and this CPU doesn't have EL3, and we're not imitating real EL3 firmware".
I like to think of it as "This CPU exposes an environment that looks like KVM, so it implements HVC calls (EL2) and is responsible for handling SMC calls as well.
That is a very KVM centric view of the world ;-)
I thought the aim was always to behave as the real processor would.
Quoted 3 lines
The main difference between the two semantics is that in yours, you don't have EL3. In mine, there is an EL3, but it's virtualized by the same layer that implements EL2.
If you boot up with secure firmware + EL2 aware KVM kernel I assume everything behaves as expected?
Quoted 39 lines
Quoted 7 lines
The architecturally correct behaviour here (since we don't implement nested-virt yet, which might allow it to trap to guest EL2) is to UNDEF, as far as I can see from a quick look at the
AArch64.CheckForSMCUndefOrTrap().Quoted 5 lines
I'm not sure why KVM makes these NOP; if I'm right about the architectural behaviour then making them NOP would be a KVM bug.
If Windows makes an SMC call on boot that seems like a guest
bug: it would crash on a real CPU without EL2/EL3 as well.I don't think there can be a real SBBR compatible CPU without EL2/EL3, because PSCI is a base requirement. That means either SMC calls succeed (Windows running in EL2) or SMC calls are trapped into EL2 and it's up to the hypervisor to decide what to do with them.
Quoted 11 lines
* Conduit SMC, valid call Trap to EL2 PSCI Call * Conduit SMC, inval call Trap to EL2 Undef insntarget/arm/op_helper.c +1
-1-* Conduit not SMC Undef insn Undef insn +* Conduit not SMC nop nop The line in this table that your commit message says you're fixing is "Conduit SMC, inval call"; the line your code change affects is "Conduit not SMC", which is not the same thing. (I'd have to look at the PSCI spec to see what it requires for SMCs that aren't valid PSCI calls.)
The patch fixes the default environment, which is "Conduit HVC, PSCI over HVC implemented by QEMU". If the patch description wasn't clear, I'm happy to reword it :).
Alex
Signature · 1 line
Alex Bennée
Quoted 21 lines · Alex Bennée
Quoted 19 lines · Alexander Graf
Quoted 17 lines · Peter Maydell
Quoted 11 lines · Alexander Graf
We currently treat unknown SMC calls as UNDEF. This behavior is different from KVM, which treats them as NOP.
Unfortunately, the UNDEF exception breaks running Windows for ARM in QEMU, as that probes an OEM SMCCC call on boot, but does not expect to receive an UNDEF exception as response.
So instead, let's follow the KVM path and ignore SMC calls that we don't handle. This fixes booting the Windows 10 for ARM preview in TCG for me.
Signed-off-by Alexander Graf <[email protected]>target/arm/helper.c void arm_cpu_do_interrupt(CPUState *cs) · line 9783
Quoted 3 lines
target/arm/helper.c +3
-0+if (cs->exception_index ==EXCP_SMC && + !arm_feature (env,ARM_FEATURE_EL3 ) && + cpu->psci_conduit !=QEMU_PSCI_CONDUIT_SMC ) {This condition says: "we got an SMC, and this CPU doesn't have EL3, and we're not imitating real EL3 firmware".
Quoted 6 lines
Quoted 3 lines
I like to think of it as "This CPU exposes an environment that looks like KVM, so it implements HVC calls (EL2) and is responsible for handling SMC calls as well.
That is a very KVM centric view of the world ;-)
I thought the aim was always to behave as the real processor would.
If we aim to behave like a "real processor", then why do we implement PSCI using HVC? A much more likely "real processor" would implement EL3, but no EL2 and then have PSCI as SMC calls, no?
My understanding for the rationale on why we do PSCI over HVC by default was to make the VM as similar between KVM and TCG as possible.
Quoted 6 lines
Quoted 4 lines
The main difference between the two semantics is that in yours, you don't have EL3. In mine, there is an EL3, but it's virtualized by the same layer that implements EL2.
If you boot up with secure firmware + EL2 aware KVM kernel I assume everything behaves as expected?
I would assume so as well, but I don't have a working ATF setup handy. I'm also not worried about making it work for me - I have my local debug setup now :). I'm worried about a good out of the box experience for users who want to run Windows on ARM in TCG.
Alex