Skip to contentSkip to conversation

system: allow not setting a default, system-wide time zone

PATCH New Yann E. MORIN 4 participants 7 messages Nov 16, 2019 – Dec 3, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

It is valid that there is no system-wide default time zone defined, in which case Etc/UTC is assumed.

Fixes #12316
Cc Martin Bark <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Richard Braun <[email protected]>
Cc Andrew Trapani <[email protected]>
---
 package/tz/tz.mk         | 17 +++++++++++------
 package/tzdata/tzdata.mk | 19 ++++++++++++-------
 system/Config.in         |  2 ++
 3 files changed, 25 insertions(+), 13 deletions(-)
package/tz/tz.mk +11 -6
index 1e797046d2..135726c2ce 100644
@@ -8,6 +8,16 @@ TZ_DEPENDENCIES = host-tzdata host-tzdump
 TZ_LICENSE = Public domain
 
 TZ_LOCALTIME = $(call qstrip,$(BR2_TARGET_LOCALTIME))
+ifneq ($(TZ_LOCALTIME),)
+define TZ_SET_LOCALTIME
+	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) ]; then \
+		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
+			"$(TZ_LOCALTIME)"; \
+		exit 1; \
+	fi
+	ln -sf ../usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) $(TARGET_DIR)/etc/TZ
+endef
+endif
 
 define TZ_BUILD_CMDS
 	(cd $(HOST_DIR)/share/zoneinfo/posix/; \
@@ -25,12 +35,7 @@ define TZ_INSTALL_TARGET_CMDS
 		$(TARGET_DIR)/usr/share/zoneinfo/iso3166.tab
 	mkdir -p $(TARGET_DIR)/usr/share/zoneinfo/uclibc
 	cp -a $(@D)/output/* $(TARGET_DIR)/usr/share/zoneinfo/uclibc
-	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) ]; then \
-		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
-			"$(TZ_LOCALTIME)"; \
-		exit 1; \
-	fi
-	ln -sf ../usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) $(TARGET_DIR)/etc/TZ
+	$(TZ_SET_LOCALTIME)
 endef
 
 $(eval $(generic-package))
package/tzdata/tzdata.mk +12 -7
index 4d097dbee9..b656bc7f7f 100644
@@ -26,6 +26,17 @@ TZDATA_ZONELIST = $(call qstrip,$(BR2_TARGET_TZ_ZONELIST))
 endif
 
 TZDATA_LOCALTIME = $(call qstrip,$(BR2_TARGET_LOCALTIME))
+ifneq ($(TZDATA_LOCALTIME),)
+define TZDATA_SET_LOCALTIME
+	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/$(TZDATA_LOCALTIME) ]; then \
+		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
+			"$(TZDATA_LOCALTIME)"; \
+		exit 1; \
+	fi
+	ln -sf ../usr/share/zoneinfo/$(TZDATA_LOCALTIME) $(TARGET_DIR)/etc/localtime
+	echo "$(TZDATA_LOCALTIME)" >$(TARGET_DIR)/etc/timezone
+endef
+endif
 
 # No need to extract for target, we're using the host-installed files
 TZDATA_EXTRACT_CMDS =
@@ -37,13 +48,7 @@ define TZDATA_INSTALL_TARGET_CMDS
 	for zone in posix/*; do \
 	    ln -sfn "$${zone}" "$${zone##*/}"; \
 	done
-	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/$(TZDATA_LOCALTIME) ]; then \
-		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
-			"$(TZDATA_LOCALTIME)"; \
-		exit 1; \
-	fi
-	ln -sf ../usr/share/zoneinfo/$(TZDATA_LOCALTIME) $(TARGET_DIR)/etc/localtime
-	echo "$(TZDATA_LOCALTIME)" >$(TARGET_DIR)/etc/timezone
+	$(TZDATA_SET_LOCALTIME)
 endef
 
 define HOST_TZDATA_BUILD_CMDS
system/Config.in +2 -0
index c87266f431..c8c5be40e0 100644
@@ -494,6 +494,8 @@ config BR2_TARGET_LOCALTIME
 	    Pacific/Wallis
 	    ...
 
+	  Set to empty to not install a default time zone.
+
 endif # BR2_TARGET_TZ_INFO
 
 config BR2_ROOTFS_USERS_TABLES
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

Hi Yann,

Quoted 10 lines · Yann E. MORIN

It is valid that there is no system-wide default time zone defined, in which case Etc/UTC is assumed.

Fixes #12316
Cc Martin Bark <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Richard Braun <[email protected]>
Cc Andrew Trapani <[email protected]>

[snip]

system/Config.in config BR2_TARGET_LOCALTIME · line 497

Quoted 9 lines
system/Config.in +1 -0
index c87266f431..c8c5be40e0 100644
@@ -494,6 +494,8 @@ config BR2_TARGET_LOCALTIME
 	    Pacific/Wallis
...
 
+	  Set to empty to not install a default time zone.

Maybe we should then also change the default to empty? Then at least this use
case gets tested in the autobuilders. Oh, maybe adding a few possible values for this config in genrandconfig would be nice as well...

BTW, I notice now that BR2_TARGET_TZ_ZONELIST is not used for uClibc (tz). Is
that expected? Maybe it should depend on !UCLIBC then?

Regards,
Arnout

Quoted 5 lines

+
endif # BR2_TARGET_TZ_INFO

config BR2_ROOTFS_USERS_TABLES

#2 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

Quoted 5 lines · On Sun, 17 Nov 2019 15:41:59 +0100 Arnout Vandecappelle <[email protected]> wrote:

system/Config.in config BR2_TARGET_LOCALTIME · line 497

Quoted 1 line
system/Config.in +1 -0
+	  Set to empty to not install a default time zone.  

Maybe we should then also change the default to empty? Then at least this use
case gets tested in the autobuilders. Oh, maybe adding a few possible values for this config in genrandconfig would be nice as well...

I think this kind of feature gets better tested by having runtime tests, which can specifically test the interesting configurations.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

Quoted 11 lines · Thomas Petazzoni
Quoted 5 lines · On Sun, 17 Nov 2019 15:41:59 +0100 Arnout Vandecappelle <[email protected]> wrote:

system/Config.in config BR2_TARGET_LOCALTIME · line 497

Quoted 1 line
system/Config.in +1 -0
+	  Set to empty to not install a default time zone.  

Maybe we should then also change the default to empty? Then at least this use
case gets tested in the autobuilders. Oh, maybe adding a few possible values for this config in genrandconfig would be nice as well...

I think this kind of feature gets better tested by having runtime tests, which can specifically test the interesting configurations.

I didn't express myself very well...

The change default to empty was independent of the testing. I just thought that
it makes more sense to not install a default timezone than to install UTC as default (net result is equivalent, but semantically no timezone makes more sense IMO).

And then I thought: that's nice, that way the feature also gets tested in the
autobuilders.

Regards,
Arnout

#4 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

In reply to Arnout Vandecappelle

Arnout, All,

On 2019-11-17 15:41 +0100, Arnout Vandecappelle spake thusly:

Quoted 20 lines · Yann E. MORIN
Quoted 10 lines

It is valid that there is no system-wide default time zone defined, in which case Etc/UTC is assumed.

Fixes #12316
Cc Martin Bark <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Richard Braun <[email protected]>
Cc Andrew Trapani <[email protected]>

[snip]

Quoted 8 lines
system/Config.in +0 -0
index c87266f431..c8c5be40e0 100644
@@ -494,6 +494,8 @@ config BR2_TARGET_LOCALTIME
 	    Pacific/Wallis
...
Quoted 3 lines

system/Config.in config BR2_TARGET_LOCALTIME · line 497

Quoted 1 line
system/Config.in +1 -0
+	  Set to empty to not install a default time zone.

Maybe we should then also change the default to empty?

I disagree. I prefer there is an explicit default, which makes it obvious what it means, rather than use an implicit setting.

Quoted 3 lines

Then at least this use
case gets tested in the autobuilders. Oh, maybe adding a few possible values for this config in genrandconfig would be nice as well...

If you enable the randomisation in genrandconfig, then there is no longer any reason to set the default to empty, is there?

Quoted 2 lines

BTW, I notice now that BR2_TARGET_TZ_ZONELIST is not used for uClibc (tz). Is
that expected? Maybe it should depend on !UCLIBC then?

I think this should be done in a further patch. Having a value that is not used in the uClibc case is not a regression: it's been like that for years now, since 2014 with commit 337fbd549c.

On the other hand, this patch fixes an existing issue (#12316).

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#5 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

In reply to Yann E. MORIN
Quoted 10 lines · On Sat, 16 Nov 2019 10:10:04 +0100 "Yann E. MORIN" <[email protected]>…

It is valid that there is no system-wide default time zone defined, in which case Etc/UTC is assumed.

Fixes #12316
Cc Martin Bark <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Richard Braun <[email protected]>
Cc Andrew Trapani <[email protected]>
Quoted 5 lines
---
 package/tz/tz.mk         | 17 +++++++++++------
 package/tzdata/tzdata.mk | 19 ++++++++++++-------
 system/Config.in         |  2 ++
 3 files changed, 25 insertions(+), 13 deletions(-)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#6 lore raw

PATCH 1/1 system: allow not setting a default, system-wide time zone

In reply to Yann E. MORIN
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Yann" == Yann E MORIN <[email protected]> writes:

It is valid that there is no system-wide default time zone defined, in which case Etc/UTC is assumed.

Quoted 7 lines
Fixes #12316
Cc Martin Bark <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Richard Braun <[email protected]>
Cc Andrew Trapani <[email protected]>

Committed to 2019.02.x and 2019.08.x, thanks.

Signature · 1 line
Bye, Peter Korsgaard