package/procps-ng: add init script for sysctl
PATCH v3 1/2 package/procps-ng: add init script for sysctl
From: Carlos Santos <[email protected]>
Add a simple init script that invokes sysctl early in the initialization process to configure kernel parameters. This is already performed by systemd (systemd-sysctl) but there is no sysvinit/busybox counterpart.
Files are read from directories in the following list in the given order from top to bottom:
/run/sysctl.d/*.conf
/etc/sysctl.d/*.conf
/usr/local/lib/sysctl.d/*.conf
/usr/lib/sysctl.d/*.conf
/lib/sysctl.d/*.conf
/etc/sysctl.conf---
Changes v2->v3:
- Update SOB, since I don't work for DATACOM anymore.
Changes v1->v2:
- The "--system" option activates "--ignore", which is bad because invalid variable settings in the configuration files will not be reported on the system log. Use some scripting to mimic the --system behavior but still reporting errors.
- Redirect sysctl's standard output to syslog with facility.level "kern.info" and standard error to syslog with facility.level "kern.err".
- Do not pass "--quiet" to sysctl, since we wanto to see the results.
- Use "Running" and "Rerunning" instead of "Starting", since we do not really start anything, just run a program.
- Do nothing on "stop", since ther is no running daemon to stop.
--- package/procps-ng/S02sysctl | 64 ++++++++++++++++++++++++++++++++++ package/procps-ng/procps-ng.mk | 5 +++ 2 files changed, 69 insertions(+) create mode 100644 package/procps-ng/S02sysctl --- package/procps-ng/S02sysctl | 64 ++++++++++++++++++++++++++++++++++ package/procps-ng/procps-ng.mk | 5 +++ 2 files changed, 69 insertions(+) create mode 100644 package/procps-ng/S02sysctl
package/procps-ng/S02sysctl new file +64 -0
@@ -0,0 +1,64 @@ +#!/bin/sh + +PROGRAM="sysctl" + +SYSCTL_ARGS="" + +# shellcheck source=/dev/null +[ -r "/etc/default/$PROGRAM" ] && . "/etc/default/$PROGRAM" + +# Files are read from directories in the SYSCTL_SOURCES list, in the given +# order. A file may be used more than once, since there can be multiple +# symlinks to it. No attempt is made to prevent this. +SYSCTL_SOURCES="/etc/sysctl.d/ /usr/local/lib/sysctl.d/ /usr/lib/sysctl.d/ /lib/sysctl.d/ /etc/sysctl.conf" + +# The "--system" option activates "--ignore", which is bad because invalid +# variable settings in the configuration files will not be reported on the +# system log. Use some scripting to mimic the --system behavior but still +# reporting errors. Users not interested on error report can put "-e" in +# SYSCTL_ARGS. +# +# The file redirections do the following: +# +# - stdout is redirected to syslog with facility.level "kern.info" +# - stderr is redirected to syslog with facility.level "kern.err" +# - file dscriptor 4 is used to pass the result to the "start" function. +# +run_program() { + # shellcheck disable=SC2086 # we need the word splitting + find $SYSCTL_SOURCES -maxdepth 1 -name '*.conf' -print0 2> /dev/null | \ + xargs -0 -r -n 1 readlink -f | { + prog_status="OK" + while :; do + read -r file + if [ -z "$file" ]; then + echo "$prog_status" >&4 + break + fi + echo "* Applying $file ..." + /sbin/sysctl -p "$file" $SYSCTL_ARGS || prog_status="FAIL" + done 2>&1 >&3 | /usr/bin/logger -t sysctl -p kern.err + } 3>&1 | /usr/bin/logger -t sysctl -p kern.info +} + +start() { + printf '%s %s: ' "$1" "$PROGRAM" + status=$(run_program 4>&1) + echo "$status" + if [ "$status" = "OK" ]; then + return 0 + fi + return 1 +} + +case "$1" in + start) + start "Running";; + restart|reload) + start "Rerunning";; + stop) + :;; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 +esac
package/procps-ng/procps-ng.mk +5 -0
@@ -44,4 +44,9 @@ ifeq ($(BR2_STATIC_LIBS),y) PROCPS_NG_CONF_OPTS += --disable-numa endif +define PROCPS_NG_INSTALL_INIT_SYSV + $(INSTALL) -D -m 755 package/procps-ng/S02sysctl \ + $(TARGET_DIR)/etc/init.d/S02sysctl +endef + $(eval $(autotools-package))
Signature · 1 line
2.20.1
PATCH v3 2/2 package/busybox: add init script for sysctl
From: Carlos Santos <[email protected]>
Add a simple init script that invokes sysctl early in the initialization process to configure kernel parameters. This is already performed by systemd (systemd-sysctl) but there is no sysvinit/busybox counterpart.
Files are read from directories in the following list in the given order from top to bottom:
/run/sysctl.d/*.conf
/etc/sysctl.d/*.conf
/usr/local/lib/sysctl.d/*.conf
/usr/lib/sysctl.d/*.conf
/lib/sysctl.d/*.conf
/etc/sysctl.confA file may be used more than once, since there can be multiple symlinks to it. No attempt is made to prevent this.
---
Changes v2->v3:
- Update SOB, since I don't work for DATACOM anymore.
Changes v1->v2:
- Use a while loop to process all files.
- Redirect sysctl's standard output to syslog with facility.level "kern.info" and standard error to syslog with facility.level "kern.err".
- Do not pass "-q" to sysctl, since we wanto to see the results.
- Use "Running" and "Rerunning" instead of "Starting", since we do not really start anything, just run a program.
- Do nothing on "stop", since ther is no running daemon to stop.
--- package/busybox/S02sysctl | 66 ++++++++++++++++++++++++++++++++++++++ package/busybox/busybox.mk | 12 +++++++ 2 files changed, 78 insertions(+) create mode 100644 package/busybox/S02sysctl --- package/busybox/S02sysctl | 66 ++++++++++++++++++++++++++++++++++++++ package/busybox/busybox.mk | 12 +++++++ 2 files changed, 78 insertions(+) create mode 100644 package/busybox/S02sysctl
package/busybox/S02sysctl new file +66 -0
@@ -0,0 +1,66 @@ +#!/bin/sh + +PROGRAM="sysctl" + +SYSCTL_ARGS="" + +# shellcheck source=/dev/null +[ -r "/etc/default/$PROGRAM" ] && . "/etc/default/$PROGRAM" + +# Files are read from directories in the SYSCTL_SOURCES list, in the given +# order. A file may be used more than once, since there can be multiple +# symlinks to it. No attempt is made to prevent this. +SYSCTL_SOURCES="/etc/sysctl.d/ /usr/local/lib/sysctl.d/ /usr/lib/sysctl.d/ /lib/sysctl.d/ /etc/sysctl.conf" + +# Use some scripting to mimic the --system option of the sysctl provided by +# procps-ng but still reporting errors. Users not interested on error report +# can put "-e" in SYSCTL_ARGS. +# +# The file redirections do the following: +# +# - stdout is redirected to syslog with facility.level "kern.info" +# - stderr is redirected to syslog with facility.level "kern.err" +# - file dscriptor 4 is used to pass the result to the "start" function. +# +# Testing the sysctl exit code is fruitless, as at the moment, since it ends +# with status zero even if errors happen. Hopefully this will be fixed in a +# future version of Busybox. +# +run_program() { + # shellcheck disable=SC2086 # we need the word splitting + find $SYSCTL_SOURCES -maxdepth 1 -name '*.conf' -print0 2> /dev/null | \ + xargs -0 -r -n 1 readlink -f | { + prog_status="OK" + while :; do + read -r file + if [ -z "$file" ]; then + echo "$prog_status" >&4 + break + fi + echo "* Applying $file ..." + /sbin/sysctl -p "$file" $SYSCTL_ARGS || prog_status="FAIL" + done 2>&1 >&3 | /usr/bin/logger -t sysctl -p kern.err + } 3>&1 | /usr/bin/logger -t sysctl -p kern.info +} + +start() { + printf '%s %s: ' "$1" "$PROGRAM" + status=$(run_program 4>&1) + echo "$status" + if [ "$status" = "OK" ]; then + return 0 + fi + return 1 +} + +case "$1" in + start) + start "Running";; + restart|reload) + start "Rerunning";; + stop) + :;; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 +esac
package/busybox/busybox.mk +12 -0
@@ -259,6 +259,17 @@ define BUSYBOX_INSTALL_LOGGING_SCRIPT endef endif +# Only install our sysctl scripts if no other package does it. +ifeq ($(BR2_PACKAGE_PROCPS_NG),) +define BUSYBOX_INSTALL_SYSCTL_SCRIPT + if grep -q CONFIG_BB_SYSCTL=y $(@D)/.config; \ + then \ + $(INSTALL) -m 0755 -D package/busybox/S02sysctl \ + $(TARGET_DIR)/etc/init.d/S02sysctl ; \ + fi +endef +endif + ifeq ($(BR2_INIT_BUSYBOX),y) define BUSYBOX_INSTALL_INITTAB $(INSTALL) -D -m 0644 package/busybox/inittab $(TARGET_DIR)/etc/inittab
@@ -340,6 +351,7 @@ define BUSYBOX_INSTALL_INIT_SYSV $(BUSYBOX_INSTALL_MDEV_SCRIPT) $(BUSYBOX_INSTALL_LOGGING_SCRIPT) $(BUSYBOX_INSTALL_WATCHDOG_SCRIPT) + $(BUSYBOX_INSTALL_SYSCTL_SCRIPT) $(BUSYBOX_INSTALL_TELNET_SCRIPT) $(BUSYBOX_INSTALL_INDIVIDUAL_BINARIES) endef
Signature · 1 line
2.20.1
PATCH v3 2/2 package/busybox: add init script for sysctl
Carlos,
Quoted 17 lines · On Wed, May 1, 2019 at 6:11 PM <[email protected]> wrote:
From: Carlos Santos <[email protected]>
Add a simple init script that invokes sysctl early in the initialization process to configure kernel parameters. This is already performed by systemd (systemd-sysctl) but there is no sysvinit/busybox counterpart.
Files are read from directories in the following list in the given order from top to bottom:
/run/sysctl.d/*.conf /etc/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf /etc/sysctl.conf
Quoted 4 lines
A file may be used more than once, since there can be multiple symlinks to it. No attempt is made to prevent this.
Signed-off-by Carlos Santos <[email protected]>
Quoted 62 lines
---
Changesv2->v3:
- Update SOB, since I don't work for DATACOM anymore.
Changesv1->v2:
- Use a while loop to process all files.
- Redirect sysctl's standard output to syslog with facility.level "kern.info" and standard error to syslog with facility.level "kern.err".
- Do not pass "-q" to sysctl, since we wanto to see the results.
- Use "Running" and "Rerunning" instead of "Starting", since we do not really start anything, just run a program.
- Do nothing on "stop", since ther is no running daemon to stop.--- package/busybox/S02sysctl | 66 ++++++++++++++++++++++++++++++++++++++ package/busybox/busybox.mk | 12 +++++++ 2 files changed, 78 insertions(+) create mode 100644 package/busybox/S02sysctl --- package/busybox/S02sysctl | 66 ++++++++++++++++++++++++++++++++++++++ package/busybox/busybox.mk | 12 +++++++ 2 files changed, 78 insertions(+) create mode 100644 package/busybox/S02sysctlpackage/busybox/S02sysctl new file +33
-0@@ -0,0 +1,66 @@ +#!/bin/sh + +PROGRAM="sysctl" + +SYSCTL_ARGS="" + +# shellcheck source=/dev/null +[ -r "/etc/default/$PROGRAM" ] && . "/etc/default/$PROGRAM" + +# Files are read from directories in the SYSCTL_SOURCES list, in the given +# order. A file may be used more than once, since there can be multiple +# symlinks to it. No attempt is made to prevent this. +SYSCTL_SOURCES="/etc/sysctl.d/ /usr/local/lib/sysctl.d/ /usr/lib/sysctl.d/ /lib/sysctl.d/ /etc/sysctl.conf" + +# Use some scripting to mimic the --system option of the sysctl provided by +# procps-ng but still reporting errors. Users not interested on error report +# can put "-e" in SYSCTL_ARGS. +# +# The file redirections do the following: +# +# - stdout is redirected to syslog with facility.level "kern.info" +# - stderr is redirected to syslog with facility.level "kern.err" +# - file dscriptor 4 is used to pass the result to the "start" function. +# +# Testing the sysctl exit code is fruitless, as at the moment, since it ends +# with status zero even if errors happen. Hopefully this will be fixed in a +# future version of Busybox. +# +run_program() { + # shellcheck disable=SC2086 # we need the word splitting + find $SYSCTL_SOURCES -maxdepth 1 -name '*.conf' -print0 2> /dev/null | \ + xargs -0 -r -n 1 readlink -f | { + prog_status="OK"
package/busybox/S02sysctl line 43
Quoted 10 lines
package/busybox/S02sysctl new file +10
-0+ while :; do + read -r file + if [ -z "$file" ]; then + echo "$prog_status" >&4 + break + fi + echo "* Applying $file ..." + /sbin/sysctl -p "$file" $SYSCTL_ARGS || prog_status="FAIL" + done 2>&1 >&3 | /usr/bin/logger -t sysctl -p kern.err + } 3>&1 | /usr/bin/logger -t sysctl -p kern.info
Should the utilities used above be enabled automatically in the busybox config when this script is installed? I.e. add .config fixups in the busybox.mk
Quoted 32 lines
package/busybox/S02sysctl new file +23
-0+} + +start() { + printf '%s %s: ' "$1" "$PROGRAM" + status=$(run_program 4>&1) + echo "$status" + if [ "$status" = "OK" ]; then + return 0 + fi + return 1 +} + +case "$1" in + start) + start "Running";; + restart|reload) + start "Rerunning";; + stop) + :;; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 +esacpackage/busybox/busybox.mk +1
-0@@ -259,6 +259,17 @@ define BUSYBOX_INSTALL_LOGGING_SCRIPT endef endif +# Only install our sysctl scripts if no other package does it.
package/busybox/busybox.mk define BUSYBOX_INSTALL_LOGGING_SCRIPT · line 272
Quoted 10 lines
package/busybox/busybox.mk +10
-0+ifeq ($(BR2_PACKAGE_PROCPS_NG),) +define BUSYBOX_INSTALL_SYSCTL_SCRIPT + if grep -q CONFIG_BB_SYSCTL=y $(@D)/.config; \ + then \ + $(INSTALL) -m 0755 -D package/busybox/S02sysctl \ + $(TARGET_DIR)/etc/init.d/S02sysctl ; \ + fi +endef +endif +
[snip]
Matt
PATCH v3 2/2 package/busybox: add init script for sysctl
Quoted 6 lines · Matthew Weber
Carlos,
Should the utilities used above be enabled automatically in the busybox config when this script is installed? I.e. add .config fixups in the busybox.mk
It does not seem to be necessary, at the moment. The utilities are already selected in the default busybox configuration.
PATCH v3 2/2 package/busybox: add init script for sysctl
In reply to unixmania at gmail.comQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"unixmania" == unixmania <[email protected]> writes:
Hi,
Quoted 19 lines
From: Carlos Santos <[email protected]>
Add a simple init script that invokes sysctl early in the initialization process to configure kernel parameters. This is already performed by systemd (systemd-sysctl) but there is no sysvinit/busybox counterpart.Files are read from directories in the following list in the given order from top to bottom:
/run/sysctl.d/*.conf /etc/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf /etc/sysctl.confA file may be used more than once, since there can be multiple symlinks to it. No attempt is made to prevent this.
Signed-off-by Carlos Santos <[email protected]>
Quoted 12 lines
---
Changesv2->v3:
- Update SOB, since I don't work for DATACOM anymore.
Changesv1->v2:
- Use a while loop to process all files.
- Redirect sysctl's standard output to syslog with facility.level "kern.info" and standard error to syslog with facility.level "kern.err".
- Do not pass "-q" to sysctl, since we wanto to see the results.
- Use "Running" and "Rerunning" instead of "Starting", since we do not really start anything, just run a program.
- Do nothing on "stop", since ther is no running daemon to stop.
Committed, thanks. Sorry for the delay.
Signature · 1 line
Bye, Peter Korsgaard
PATCH v3 1/2 package/procps-ng: add init script for sysctl
In reply to unixmania at gmail.comQuoted 18 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"unixmania" == unixmania <[email protected]> writes:
From: Carlos Santos <[email protected]>
Add a simple init script that invokes sysctl early in the initialization process to configure kernel parameters. This is already performed by systemd (systemd-sysctl) but there is no sysvinit/busybox counterpart.Files are read from directories in the following list in the given order from top to bottom:
/run/sysctl.d/*.conf /etc/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf /lib/sysctl.d/*.conf /etc/sysctl.confSigned-off-by Carlos Santos <[email protected]>
Quoted 15 lines
---
Changesv2->v3:
- Update SOB, since I don't work for DATACOM anymore.
Changesv1->v2:
- The "--system" option activates "--ignore", which is bad because invalid variable settings in the configuration files will not be reported on the system log. Use some scripting to mimic the --system behavior but still reporting errors.
- Redirect sysctl's standard output to syslog with facility.level "kern.info" and standard error to syslog with facility.level "kern.err".
- Do not pass "--quiet" to sysctl, since we wanto to see the results.
- Use "Running" and "Rerunning" instead of "Starting", since we do not really start anything, just run a program.
- Do nothing on "stop", since ther is no running daemon to stop.
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard