ARM: dts: armada-370-rn102: add pinmuxing for i2c0
PATCH 1/1 ARM: dts: armada-370-rn102: add pinmuxing for i2c0
Up to now a working i2c bus depended on the bootloader to configure the pinmuxing. Make it explicit.
As a side effect this change makes i2c work in barebox.
Signed-off-by Uwe Kleine-K?nig <[email protected]>
--- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/armada-370-netgear-rn102.dts +4 -0
@@ -121,6 +121,10 @@ i2c at 11000 { clock-frequency = <100000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; isl12057: isl12057 at 68 {
Signature · 1 line
2.9.3
PATCH 1/1 ARM: dts: armada-370-rn102: add pinmuxing for i2c0
Hi Uwe,
Quoted 6 lines · Uwe Kleine-K?nig
Up to now a working i2c bus depended on the bootloader to configure the pinmuxing. Make it explicit.
As a side effect this change makes i2c work in barebox.
Signed-off-by Uwe Kleine-K?nig <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 22 lines
--- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/armada-370-netgear-rn102.dts +4
-0@@ -121,6 +121,10 @@ i2c at 11000 { clock-frequency = <100000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; isl12057: isl12057 at 68 {Signature · 1 line
2.9.3
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com