Various fixes
cover Various fixes
Hi all,
this patch set fix:
- some build failures
- some error messages
- some optional dependencies
Best regards
Fabio Porcedda (7):
shared-mime-info: host variant requires libxml2 and libglib2
libxmlrpc: add missing braces for variable CURL_CONFIG in patch 4 x11r7/xcb-util-keysyms: depends on host-pkgconf and libxcb package/civetweb: fix build error on a host with make v4.0
freetype: host-freetype-patch requires host-automake package/efl/libevas: add optional dependency libfribidi package/libfribidi: add optional dependency libglib2
...ua-fix-a-typo-changing-LFS_DIR-to-LFS_DIR.patch | 27 ++++++++++++++++++++++ package/efl/libevas/libevas.mk | 7 ++++++ package/freetype/freetype.mk | 7 +++--- package/libfribidi/libfribidi.mk | 6 +++++ .../libxmlrpc/0004-use-correct-curl-config.patch | 8 +++---- package/shared-mime-info/shared-mime-info.mk | 5 ++-- package/x11r7/xcb-util-keysyms/Config.in | 1 + package/x11r7/xcb-util-keysyms/xcb-util-keysyms.mk | 2 ++ 8 files changed, 54 insertions(+), 9 deletions(-) create mode 100644 package/civetweb/0001-Lua-fix-a-typo-changing-LFS_DIR-to-LFS_DIR.patch
Signature · 1 line
2.3.0
PATCH 1/7 shared-mime-info: host variant requires libxml2 and libglib2
Add to HOST_SHARED_MIME_INFO_DEPENDENCIES the missing dependencies host-libxml2 and host-libglib2.
Also remove from SHARED_MIME_INFO_DEPENDENCIES dependencies already present in HOST_SHARED_MIME_INFO_DEPENDENCIES.
Fix build failure:
configure: error: Package requirements ( libxml-2.0 >= 2.4 glib-2.0 >= 2.6.0) were not met
--- package/shared-mime-info/shared-mime-info.mk | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/shared-mime-info/shared-mime-info.mk +3 -2
@@ -9,13 +9,14 @@ SHARED_MIME_INFO_SOURCE = shared-mime-info-$(SHARED_MIME_INFO_VERSION).tar.bz2 SHARED_MIME_INFO_SITE = http://freedesktop.org/~hadess SHARED_MIME_INFO_INSTALL_STAGING = YES SHARED_MIME_INFO_CONF_ENV = XMLLINT=$(HOST_DIR)/usr/bin/xmllint -SHARED_MIME_INFO_DEPENDENCIES = host-pkgconf host-libglib2 host-libxml2 host-shared-mime-info libxml2 libglib2 +SHARED_MIME_INFO_DEPENDENCIES = host-shared-mime-info libxml2 libglib2 SHARED_MIME_INFO_CONF_OPTS = --disable-update-mimedb SHARED_MIME_INFO_MAKE = $(MAKE1) SHARED_MIME_INFO_LICENSE = GPLv2 SHARED_MIME_INFO_LICENSE_FILES = COPYING -HOST_SHARED_MIME_INFO_DEPENDENCIES = host-pkgconf host-intltool +HOST_SHARED_MIME_INFO_DEPENDENCIES = \ + host-pkgconf host-intltool host-libxml2 host-libglib2 HOST_SHARED_MIME_INFO_CONF_OPTS = --disable-update-mimedb HOST_SHARED_MIME_INFO_MAKE = $(MAKE1)
Signature · 1 line
2.3.0
PATCH 1/7 shared-mime-info: host variant requires libxml2 and libglib2
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Add to
HOST_SHARED_MIME_INFO_DEPENDENCIESthe missing dependencies host-libxml2 and host-libglib2.
Quoted 7 lines
Also remove from
SHARED_MIME_INFO_DEPENDENCIESdependencies already present inHOST_SHARED_MIME_INFO_DEPENDENCIES.Fix build failure:
configure: error: Package requirements ( libxml-2.0 >= 2.4 glib-2.0 >= 2.6.0) were not metSigned-off-by Fabio Porcedda <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 2/7 libxmlrpc: add missing braces for variable CURL_CONFIG in patch 4
In reply to Fabio PorceddaChange $CURL_CONFIG to $(CURL_CONFIG) in the patch 0004-use-correct-curl-config.patch because in a makefile the braces are required to expand a variable.
Fix error messages:
make[3]: Entering directory '/home/tetsuya/buildroot/br2/output/build/libxmlrpc-1.25.30/lib/curl_transport' make[3]: URL_CONFIG: Command not found/bin/sh: line 0: test: <: unary operator expected
make[3]: URL_CONFIG: Command not found
--- package/libxmlrpc/0004-use-correct-curl-config.patch | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
package/libxmlrpc/0004-use-correct-curl-config.patch +4 -4
@@ -55,7 +55,7 @@ Index: b/lib/curl_transport/Makefile $(SRCDIR)/common.mk: srcdir blddir -CURL_VERSION := $(shell curl-config --vernum) -+CURL_VERSION := $(shell $CURL_CONFIG --vernum) ++CURL_VERSION := $(shell $(CURL_CONFIG) --vernum) # Some time at or before Curl 7.12, <curl/types.h> became an empty file # (no-op). Some time after Curl 7.18, <curl/types.h> ceased to exist.
@@ -64,7 +64,7 @@ Index: b/lib/curl_transport/Makefile endif -CURL_INCLUDES := $(shell curl-config --cflags) -+CURL_INCLUDES := $(shell $CURL_CONFIG --cflags) ++CURL_INCLUDES := $(shell $(CURL_CONFIG) --cflags) # We expect that curl-config --cflags just gives us -I options, because # we need just the -I options for 'make dep'. Plus, it's scary to think # of what any other compiler flag would do to our compile.
@@ -77,7 +77,7 @@ Index: b/src/cpp/test/Makefile ifeq ($(MUST_BUILD_CURL_CLIENT),yes) - LIBS += $(shell curl-config --libs) -+ LIBS += $(shell $CURL_CONFIG --libs) ++ LIBS += $(shell $(CURL_CONFIG) --libs) endif ifeq ($(MUST_BUILD_LIBWWW_CLIENT),yes) LIBS += $(shell libwww-config --libs)
@@ -90,7 +90,7 @@ Index: b/tools/common.mk endif ifeq ($(MUST_BUILD_CURL_CLIENT),yes) - CLIENT_LDLIBS += $(shell curl-config --libs) -+ CLIENT_LDLIBS += $(shell $CURL_CONFIG --libs) ++ CLIENT_LDLIBS += $(shell $(CURL_CONFIG) --libs) endif ifeq ($(MUST_BUILD_WININET_CLIENT),yes) CLIENT_LDLIBS += $(shell wininet-config --libs)
Signature · 1 line
2.3.0
PATCH 2/7 libxmlrpc: add missing braces for variable CURL_CONFIG in patch 4
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Change $CURL_CONFIG to $(CURL_CONFIG) in the patch 0004-use-correct-curl-config.patch because in a makefile the braces are required to expand a variable.
Quoted 7 lines
Fix error messages:
make[3]: Entering directory '/home/tetsuya/buildroot/br2/output/build/libxmlrpc-1.25.30/lib/curl_transport' make[3]:URL_CONFIG: Command not found/bin/sh: line 0: test: <: unary operator expected
make[3]:URL_CONFIG: Command not foundSigned-off-by Fabio Porcedda <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 3/7 x11r7/xcb-util-keysyms: depends on host-pkgconf and libxcb
In reply to Fabio PorceddaFix build failure:
./configure: line 11453: /home/tetsuya/buildroot/br/output/host/usr/bin/pkg-config: No such file or directory
configure: error: in `/home/tetsuya/buildroot/br/output/build/xcb-util-keysyms-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Fix build failure:
configure: error: Package requirements (xcb >= 1.4) were not met:
--- package/x11r7/xcb-util-keysyms/Config.in | 1 + package/x11r7/xcb-util-keysyms/xcb-util-keysyms.mk | 2 ++ 2 files changed, 3 insertions(+)
package/x11r7/xcb-util-keysyms/Config.in +1 -0
@@ -1,5 +1,6 @@ config BR2_PACKAGE_XCB_UTIL_KEYSYMS bool "xcb-util-keysyms" + select BR2_PACKAGE_LIBXCB help The XCB util modules provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension
package/x11r7/xcb-util-keysyms/xcb-util-keysyms.mk +2 -0
@@ -13,4 +13,6 @@ XCB_UTIL_KEYSYMS_LICENSE = MIT XCB_UTIL_KEYSYMS_INSTALL_STAGING = YES +XCB_UTIL_KEYSYMS_DEPENDENCIES = host-pkgconf libxcb + $(eval $(autotools-package))
Signature · 1 line
2.3.0
PATCH 3/7 x11r7/xcb-util-keysyms: depends on host-pkgconf and libxcb
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Fix build failure:
./configure: line 11453:/home/tetsuya/buildroot/br/output/host/usr/bin/pkg-config: No such file or directory
configure: error: in `/home/tetsuya/buildroot/br/output/build/xcb-util-keysyms-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set thePKG_CONFIGenvironment variable to the full
path to pkg-config.
Quoted 4 lines
Fix build failure:
configure: error: Package requirements (xcb >= 1.4) were not met:Signed-off-by Fabio Porcedda <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 4/7 package/civetweb: fix build error on a host with make v4.0
In reply to Fabio PorceddaAdd a patch to fix a typo that on a system with make v4.0 and BR2_CIVETWEB_WITH_LUA=y fails to build:
Makefile:203: *** mixed implicit and normal rules. Stop.
The patch was not sent upstream because this problem is already fixed on master.
--- ...ua-fix-a-typo-changing-LFS_DIR-to-LFS_DIR.patch | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 package/civetweb/0001-Lua-fix-a-typo-changing-LFS_DIR-to-LFS_DIR.patch
package/civetweb/0001-Lua-fix-a-typo-changing-LFS_DIR-to-LFS_DIR.patch new file +27 -0
@@ -0,0 +1,27 @@ +From 0821066f9adf8410891cd07684ecac50a9bc36a4 Mon Sep 17 00:00:00 2001 +From: Fabio Porcedda <fabio.porcedda@gmail> +Date: Wed, 25 Feb 2015 18:40:24 +0100 +Subject: [PATCH] Lua: fix a typo changing %(LFS_DIR) to $(LFS_DIR) + +Also this fix a error on GNU Make v4.0: + Makefile:203: *** mixed implicit and normal rules. Stop. + +Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail> +--- + resources/Makefile.in-lua | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/resources/Makefile.in-lua b/resources/Makefile.in-lua +index 0902f11..f3d95fd 100644 +--- a/resources/Makefile.in-lua ++++ b/resources/Makefile.in-lua +@@ -57,5 +57,5 @@ LFS_CFLAGS = -I$(LFS_DIR) + + OBJECTS += $(LUA_OBJECTS) $(SQLITE_OBJECTS) $(LFS_OBJECTS) + CFLAGS += $(LUA_CFLAGS) $(SQLITE_CFLAGS) $(LFS_CFLAGS) -DUSE_LUA -DUSE_LUA_SQLITE3 -DUSE_LUA_FILE_SYSTEM +-SOURCE_DIRS = $(LUA_DIR) $(SQLITE_DIR) %(LFS_DIR) ++SOURCE_DIRS = $(LUA_DIR) $(SQLITE_DIR) $(LFS_DIR) + +-- +2.3.0 +
Signature · 1 line
2.3.0
PATCH 4/7 package/civetweb: fix build error on a host with make v4.0
Quoted 10 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Add a patch to fix a typo that on a system with make v4.0 and BR2_CIVETWEB_WITH_LUA=y fails to build:
Makefile:203: *** mixed implicit and normal rules. Stop.The patch was not sent upstream because this problem is already fixed on master.
Signed-off-by Fabio Porcedda <[email protected]>
Committed, thanks.
Strangely enough, make on my system (Debian 4.0-8.1) only warns about the syntax:
Makefile:203: *** mixed implicit and normal rules: deprecated syntax
With the patch applied I get another warning, but that can probably be ignored:
Makefile:203: target 'out/src/third_party' given more than once in the same rule
Signature · 1 line
Bye, Peter Korsgaard
PATCH 4/7 package/civetweb: fix build error on a host with make v4.0
Quoted 9 lines · Peter Korsgaard
Quoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Add a patch to fix a typo that on a system with make v4.0 and BR2_CIVETWEB_WITH_LUA=y fails to build:
Makefile:203: *** mixed implicit and normal rules. Stop.The patch was not sent upstream because this problem is already fixed on master.
Quoted 8 lines
Quoted 1 line
Signed-off-by Fabio Porcedda <[email protected]>Committed, thanks.
Strangely enough, make on my system (Debian 4.0-8.1) only warns about the syntax:
Makefile:203: *** mixed implicit and normal rules: deprecated syntax
That is because in the debian package the have backported a change to turn it in a worning:
http://metadata.ftp-master.debian.org/changelogs//main/m/make-dfsg/make-dfsg_4.0-8.1_changelog
make-dfsg (4.0-2) experimental; urgency=medium
* Pull back some patches from upstream git that fix bugs. One of these converts the mixed implicit and explicit rule error into a warning, and that should give us a grace period to fix the Makefiles,
The make on fedora 21 does not have such a patch so it fails like the officiale make 4.0 release.
Quoted 6 lines
With the patch applied I get another warning, but that can probably be ignored:
Makefile:203: target 'out/src/third_party' given more than once in the same rule --
Bye, Peter Korsgaard
BR
Signature · 1 line
Fabio Porcedda
PATCH 4/7 package/civetweb: fix build error on a host with make v4.0
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Hi,
Quoted 12 lines
Quoted 6 lines
Committed, thanks.
Strangely enough, make on my system (Debian 4.0-8.1) only warns about the syntax:
Makefile:203: *** mixed implicit and normal rules: deprecated syntax
That is because in the debian package the have backported a change to turn it in a worning:
http://metadata.ftp-master.debian.org/changelogs//main/m/make-dfsg/make-dfsg_4.0-8.1_changelog
make-dfsg (4.0-2) experimental; urgency=medium
Quoted 6 lines
* Pull back some patches from upstream git that fix bugs. One of these converts the mixed implicit and explicit rule error into a warning, and that should give us a grace period to fix the Makefiles,
The make on fedora 21 does not have such a patch so it fails like the officiale make 4.0 release.
Ok, thanks!
Signature · 1 line
Bye, Peter Korsgaard
PATCH 5/7 freetype: host-freetype-patch requires host-automake
In reply to Fabio PorceddaThe "make host-freetype-patch" fails because using the autogen.sh script it doesn't found the autoconf tool, the problem was already fixed for "make freetype-patch" adding the "host-automake" as a prerequisite to freetype-patch, so fix it by adding "host-automake" as a prerequisite to "host-freetype-patch" too.
Fix build failure:
running `autoconf --force'
./autogen.sh: line 15: autoconf: command not found
error while running `autoconf --force'package/pkg-generic.mk:146: recipe for target 'buildroot/output/build/host-freetype-2.5.5/.stamp_patched' failed
--- package/freetype/freetype.mk | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
package/freetype/freetype.mk +4 -3
@@ -98,6 +98,7 @@ HOST_FREETYPE_POST_INSTALL_HOOKS += HOST_FREETYPE_FIX_FREETYPE_INCLUDE $(eval $(autotools-package)) $(eval $(host-autotools-package)) -# freetype-patch uses autogen.sh so add it as a order-only-prerequisite -# because it is a phony target. -$(FREETYPE_TARGET_PATCH): | host-automake +# freetype-patch and host-freetype-patch use autogen.sh so add +# host-automake as a order-only-prerequisite because it is a phony +# target. +$(FREETYPE_TARGET_PATCH) $(HOST_FREETYPE_TARGET_PATCH): | host-automake
Signature · 1 line
2.3.0
PATCH 5/7 freetype: host-freetype-patch requires host-automake
Dear Fabio Porcedda,
Quoted 6 lines · Fabio Porcedda
The "make host-freetype-patch" fails because using the
autogen.shscript it doesn't found the autoconf tool, the problem was already fixed for "make freetype-patch" adding the "host-automake" as a prerequisite to freetype-patch, so fix it by adding "host-automake" as a prerequisite to "host-freetype-patch" too.
Quoted 7 lines
Fix build failure:
running `autoconf --force'
./autogen.sh: line 15: autoconf: command not found
error while running `autoconf --force'package/pkg-generic.mk:146: recipe for target 'buildroot/output/build/host-freetype-2.5.5/.stamp_patched' failedSigned-off-by Fabio Porcedda <[email protected]>
Maybe this has been discussed before, but why are we doing the autogen in a post patch hook rather than in a pre-configure hook ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 5/7 freetype: host-freetype-patch requires host-automake
Quoted 15 lines · Thomas Petazzoni
Dear Fabio Porcedda,
Quoted 12 lines · Fabio Porcedda
The "make host-freetype-patch" fails because using the
autogen.shscript it doesn't found the autoconf tool, the problem was already fixed for "make freetype-patch" adding the "host-automake" as a prerequisite to freetype-patch, so fix it by adding "host-automake" as a prerequisite to "host-freetype-patch" too.Fix build failure:
running `autoconf --force'
./autogen.sh: line 15: autoconf: command not found
error while running `autoconf --force'package/pkg-generic.mk:146: recipe for target 'buildroot/output/build/host-freetype-2.5.5/.stamp_patched' failed
Quoted 4 lines
Quoted 1 line
Signed-off-by Fabio Porcedda <[email protected]>Maybe this has been discussed before, but why are we doing the autogen in a post patch hook rather than in a pre-configure hook ?
Inside the freetype.mk file there is a comment about that:
# POST_PATCH is because we still need to patch libtool after the regen.
The message and hook was added in this commit:
commit a31a66802a7a1af76a629b0ba7120424ed547646
Author: Gustavo Zacarias <[email protected]> Date: Tue Apr 22 14:12:40 2014 -0300
freetype: security bump to version 2.5.3
Fixes CVE-2014-2240.
I've tried to use a PRE_CONFIGURE hook but it fails:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
host-freetype 2.5.5 Patching
host-freetype 2.5.5 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/fabiopo/buildroot/br/output/build/host-freetype-2.5.5 -name $file); do cp support/gnuconfig/$file $i; done; done
Quoted 1 line
Quoted 1 line
Quoted 1 line
host-freetype 2.5.5 Patching libtool
Applying buildroot-libtool-v2.4.patch using patch:
patching file ltmain.sh
Hunk #1 FAILED at 1417.
Hunk #2 FAILED at 2963.
Hunk #3 FAILED at 5176.
Hunk #4 succeeded at 6537 (offset 1352 lines).
Hunk #5 succeeded at 6825 with fuzz 1 (offset 1358 lines). Hunk #6 succeeded at 7112 (offset 1363 lines).
Hunk #7 succeeded at 8055 with fuzz 2 (offset 1363 lines). Hunk #8 succeeded at 10647 (offset 1377 lines).
3 out of 8 hunks FAILED -- saving rejects to file ltmain.sh.rej Patch failed! Please fix buildroot-libtool-v2.4.patch!
BR
Signature · 1 line
Fabio Porcedda
PATCH 5/7 freetype: host-freetype-patch requires host-automake
In reply to Fabio PorceddaQuoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
The "make host-freetype-patch" fails because using the
autogen.shscript it doesn't found the autoconf tool, the problem was already fixed for "make freetype-patch" adding the "host-automake" as a prerequisite to freetype-patch, so fix it by adding "host-automake" as a prerequisite to "host-freetype-patch" too.
Committed with the commit message slightly reworded, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 6/7 package/efl/libevas: add optional dependency libfribidi
In reply to Fabio PorceddaFix the following message when libfribidi is enabled but not already built:
Package fribidi was not found in the pkg-config search path. Perhaps you should add the directory containing `fribidi.pc' No package 'fribidi' found
--- package/efl/libevas/libevas.mk | 7 +++++++ 1 file changed, 7 insertions(+)
package/efl/libevas/libevas.mk +7 -0
@@ -225,6 +225,13 @@ else LIBEVAS_CONF_OPTS += --disable-fontconfig endif +ifeq ($(BR2_PACKAGE_LIBFRIBIDI),y) +LIBEVAS_CONF_OPTS += --enable-fribidi +LIBEVAS_DEPENDENCIES += libfribidi +else +LIBEVAS_CONF_OPTS += --disable-fribidi +endif + # libevas installs the source code of examples on the target, which # are generally not useful. define LIBEVAS_REMOVE_EXAMPLES
Signature · 1 line
2.3.0
PATCH 6/7 package/efl/libevas: add optional dependency libfribidi
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Fix the following message when libfribidi is enabled but not already built:
Package fribidi was not found in the pkg-config search path. Perhaps you should add the directory containing `fribidi.pc' No package 'fribidi' foundSigned-off-by Fabio Porcedda <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 7/7 package/libfribidi: add optional dependency libglib2
In reply to Fabio PorceddaFix the following message when libglib2 is enabled but not already built:
Package glib-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `glib-2.0.pc' No package 'glib-2.0' found
--- package/libfribidi/libfribidi.mk | 6 ++++++ 1 file changed, 6 insertions(+)
package/libfribidi/libfribidi.mk +6 -0
@@ -15,4 +15,10 @@ LIBFRIBIDI_INSTALL_STAGING = YES LIBFRIBIDI_AUTORECONF = YES LIBFRIBIDI_DEPENDENCIES = host-pkgconf +ifeq ($(BR2_PACKAGE_LIBGLIB2),y) + LIBFRIBIDI_DEPENDENCIES += libglib2 +else + LIBFRIBIDI_CONF_OPTS += --with-glib=no +endif + $(eval $(autotools-package))
Signature · 1 line
2.3.0
PATCH 7/7 package/libfribidi: add optional dependency libglib2
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Fabio" == Fabio Porcedda <[email protected]> writes:
Fix the following message when libglib2 is enabled but not already built:
Package glib-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `glib-2.0.pc' No package 'glib-2.0' foundSigned-off-by Fabio Porcedda <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard