Skip to contentSkip to conversation

Add Qt5 packages

PATCH Superseded Thomas Petazzoni 4 participants 49 messages Mar 6, 2013 – Mar 7, 2013

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Add Qt5 packages

Hello,

Here is a set of patches that add Qt5 support in Buildroot. I have built a number of different combinations, but there are some many different possibilities, that I obviously couldn't test all of them. Some testing will be appreciated, but for sure, only the autobuilders will really help in getting a good build coverage of all this.

In short:

* Patch 1 improves our pcre package to add support for 16 bits and 32 bits variants, need by Qt5.

* Patches 2 to 4 bump the version or add new XCB-util packages that are needed to build the XCB backend of Qt5.

* Patches 5 to 8 add virtual packages for OpenGLES, OpenVG and EGL, and make rpi-userland provide an implementation of those virtual packages, and do other related fixes to RPi OpenGLES/EGL support.

* Patch 9 makes packages using host-jpeg use host-libjpeg instead so that we don't have to provide a virtual host-jpeg package.

* Patch 10 converts the jpeg virtual package to a real package.

* Patch 11 and 12 adds some basic infrastructure to support the Qt5 packages.

* Patch 13 adds the Qt5Base package.

* Patches 14 to 23 extend the Qt5Base package with various features (GUI, OpenSSL, EGL, D-Bus, etc.)

* Patch 24 creates a common variable to share the Qt5 version between all the Qt5 packages.

* Patches 25 to 34 add more Qt5 libraries: Qt5Svg, Qt5Webkit, Qt5Script, and more.

Changes v1 -> v2:

* Make the package that depended on host-jpeg depend on host-libjpeg directly, so that we don't need to provide a virtual host-jpeg package.
* Integrated patches from Floris Bos to fix issues related RPi OpenGLES/EGL libraries, and to get the installation of fonts done by the qt5base package.
* pcre: fixed typo is -> if in commit log [Gustavo Zacarias]
* pcre: fix help text in Config.in [Gustavo Zacarias]

The patches are also available from:

http://git.free-electrons.com/users/thomas-petazzoni/buildroot/log/?h=qt5

Best regards,

Thomas

#1 lore raw

PATCH 1/34 pcre: add support for 16 bits and 32 bits variants

Until now, we have been building only the 8bits PCRE variant. However, Qt5 requires the 16bits variant. This commit therefore adds support to build the 16bits and 32bits variants of PCRE. In order to preserve backward compatibility, the 8bits variant is automatically chosen if no specific variant is defined.

---
Changes v1->v2:
* Fix commit message is -> if [Gustavo Zacarias]
* Fix help text in Config.in [Gustavo Zacarias]

---
 package/pcre/Config.in |   22 ++++++++++++++++++++++
 package/pcre/pcre.mk   |    4 ++++
 2 files changed, 26 insertions(+)
package/pcre/Config.in +22 -0
index a4e2547..5d16e6d 100644
@@ -1,6 +1,28 @@
 config BR2_PACKAGE_PCRE
 	bool "pcre"
+	# Ensure at least the default 8-bit library is enabled.
+	select BR2_PACKAGE_PCRE_8 if \
+	       (!BR2_PACKAGE_PCRE_16 && !BR2_PACKAGE_PCRE_32)
 	help
 	  Perl Compatible Regular Expressions
 
 	  http://www.pcre.org/
+
+if BR2_PACKAGE_PCRE
+
+config BR2_PACKAGE_PCRE_8
+	bool "8-bit pcre"
+	help
+	  This option builds the 8-bits pcre library, i.e 'libpcre'
+
+config BR2_PACKAGE_PCRE_16
+	bool "16-bit pcre"
+	help
+	  This option builds the 16-bits pcre library, i.e 'libpcre16'
+
+config BR2_PACKAGE_PCRE_32
+	bool "32-bit pcre"
+	help
+	  This option builds the 32-bits pcre library, i.e 'libpcre32'
+
+endif
package/pcre/pcre.mk +4 -0
index 48266ff..b1339fb 100644
@@ -16,4 +16,8 @@ ifneq ($(BR2_INSTALL_LIBSTDCPP),y)
 PCRE_CONF_OPT = --disable-cpp
 endif
 
+PCRE_CONF_OPT += $(if $(BR2_PACKAGE_PCRE_8),--enable-pcre8,--disable-pcre8)
+PCRE_CONF_OPT += $(if $(BR2_PACKAGE_PCRE_16),--enable-pcre16,--disable-pcre16)
+PCRE_CONF_OPT += $(if $(BR2_PACKAGE_PCRE_32),--enable-pcre32,--disable-pcre32)
+
 $(eval $(autotools-package))
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 1/34 pcre: add support for 16 bits and 32 bits variants

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Until now, we have been building only the 8bits PCRE Thomas> variant. However, Qt5 requires the 16bits variant. This commit Thomas> therefore adds support to build the 16bits and 32bits variants Thomas> of PCRE. In order to preserve backward compatibility, the 8bits Thomas> variant is automatically chosen if no specific variant is Thomas> defined.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#3 lore raw

PATCH 2/34 x11r7/xcb-util: bump to 0.3.9

In reply to Thomas Petazzoni
---
 package/x11r7/xcb-util/xcb-util.mk |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/x11r7/xcb-util/xcb-util.mk +1 -1
index 5681b72..fcf99ea 100644
@@ -3,7 +3,7 @@
 # xcb-util
 #
 #############################################################
-XCB_UTIL_VERSION = 0.3.6
+XCB_UTIL_VERSION = 0.3.9
 XCB_UTIL_SOURCE = xcb-util-$(XCB_UTIL_VERSION).tar.bz2
 XCB_UTIL_SITE = http://xcb.freedesktop.org/dist/
 XCB_UTIL_INSTALL_STAGING = YES
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH 2/34 x11r7/xcb-util: bump to 0.3.9

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Signed-off-by: Thomas Petazzoni <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#5 lore raw

PATCH 3/34 x11r7/xcb-util-wm: new package

In reply to Thomas Petazzoni
---
 package/x11r7/Config.in                  |    1 +
 package/x11r7/xcb-util-wm/Config.in      |   15 +++++++++++++++
 package/x11r7/xcb-util-wm/xcb-util-wm.mk |   13 +++++++++++++
 3 files changed, 29 insertions(+)
 create mode 100644 package/x11r7/xcb-util-wm/Config.in
 create mode 100644 package/x11r7/xcb-util-wm/xcb-util-wm.mk
package/x11r7/Config.in +1 -0
index 706574c..2abd593 100644
@@ -16,6 +16,7 @@ if BR2_PACKAGE_XORG7
 		source package/x11r7/mesa3d/Config.in
 		source package/x11r7/xcb-util/Config.in
 		source package/x11r7/xcb-util-keysyms/Config.in
+		source package/x11r7/xcb-util-wm/Config.in
 		source package/x11r7/xlib_libFS/Config.in
 		source package/x11r7/xlib_libICE/Config.in
 		source package/x11r7/xlib_libSM/Config.in
package/x11r7/xcb-util-wm/Config.in new file +15 -0
new file mode 100644
index 0000000..491e7a3
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_XCB_UTIL_WM
+	bool "xcb-util-wm"
+	help
+	  The XCB util modules provides a number of libraries which sit on top
+	  of libxcb, the core X protocol library, and some of the extension
+	  libraries. These experimental libraries provide convenience functions
+	  and interfaces which make the raw X protocol more usable. Some of the
+	  libraries also provide client-side code which is not strictly part of
+	  the X protocol but which have traditionally been provided by Xlib.
+
+	  XCB util-wm module provides the following libraries:
+	    - ewmh: Both client and window-manager helpers for EWMH.
+	    - icccm: Both client and window-manager helpers for ICCCM.
+
+	  http://xcb.freedesktop.org/
package/x11r7/xcb-util-wm/xcb-util-wm.mk new file +13 -0
new file mode 100644
index 0000000..a631fa6
@@ -0,0 +1,13 @@
+#############################################################
+#
+# xcb-util-wm
+#
+#############################################################
+
+XCB_UTIL_WM_VERSION = 0.3.9
+XCB_UTIL_WM_SITE = http://xcb.freedesktop.org/dist/
+XCB_UTIL_WM_SOURCE = xcb-util-wm-$(XCB_UTIL_WM_VERSION).tar.bz2
+XCB_UTIL_WM_INSTALL_STAGING = YES
+XCB_UTIL_WM_LICENSE = MIT
+
+$(eval $(autotools-package))
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH 3/34 x11r7/xcb-util-wm: new package

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Signed-off-by: Thomas Petazzoni <[email protected]> Thomas> ---

 Thomas>  package/x11r7/Config.in                  |    1 +
 Thomas>  package/x11r7/xcb-util-wm/Config.in      |   15 +++++++++++++++
 Thomas>  package/x11r7/xcb-util-wm/xcb-util-wm.mk |   13 +++++++++++++
 Thomas>  3 files changed, 29 insertions(+)
 Thomas>  create mode 100644 package/x11r7/xcb-util-wm/Config.in
 Thomas>  create mode 100644 package/x11r7/xcb-util-wm/xcb-util-wm.mk

Thomas> diff --git a/package/x11r7/Config.in b/package/x11r7/Config.in Thomas> index 706574c..2abd593 100644
Thomas> --- a/package/x11r7/Config.in
Thomas> +++ b/package/x11r7/Config.in
Thomas> @@ -16,6 +16,7 @@ if BR2_PACKAGE_XORG7

 Thomas>  		source package/x11r7/mesa3d/Config.in
 Thomas>  		source package/x11r7/xcb-util/Config.in
 Thomas>  		source package/x11r7/xcb-util-keysyms/Config.in
 Thomas> +		source package/x11r7/xcb-util-wm/Config.in
 Thomas>  		source package/x11r7/xlib_libFS/Config.in
 Thomas>  		source package/x11r7/xlib_libICE/Config.in
 Thomas>  		source package/x11r7/xlib_libSM/Config.in

Thomas> diff --git a/package/x11r7/xcb-util-wm/Config.in b/package/x11r7/xcb-util-wm/Config.in Thomas> new file mode 100644
Thomas> index 0000000..491e7a3
Thomas> --- /dev/null
Thomas> +++ b/package/x11r7/xcb-util-wm/Config.in
Thomas> @@ -0,0 +1,15 @@
Thomas> +config BR2_PACKAGE_XCB_UTIL_WM
Thomas> + bool "xcb-util-wm"
Thomas> + help

Doesn't this need to depend on libxcb or atleast host-pkgconf?

checking for XCB... no
configure: error: in `/home/peko/source/buildroot/output/build/xcb-util-wm-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.

Alternatively, you may set the environment variables XCB_CFLAGS and XCB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.

To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
make: *** [/home/peko/source/buildroot/output/build/xcb-util-wm-0.3.9/.stamp_configured] Error 1

Signature · 1 line
Bye, Peter Korsgaard
#7 lore raw

PATCH 4/34 x11r7/xcb-util-image: new package

In reply to Thomas Petazzoni
---
 package/x11r7/Config.in                        |    1 +
 package/x11r7/xcb-util-image/Config.in         |   15 +++++++++++++++
 package/x11r7/xcb-util-image/xcb-util-image.mk |   14 ++++++++++++++
 3 files changed, 30 insertions(+)
 create mode 100644 package/x11r7/xcb-util-image/Config.in
 create mode 100644 package/x11r7/xcb-util-image/xcb-util-image.mk
package/x11r7/Config.in +1 -0
index 2abd593..5d0f991 100644
@@ -15,6 +15,7 @@ if BR2_PACKAGE_XORG7
 		source package/x11r7/libxcb/Config.in
 		source package/x11r7/mesa3d/Config.in
 		source package/x11r7/xcb-util/Config.in
+		source package/x11r7/xcb-util-image/Config.in
 		source package/x11r7/xcb-util-keysyms/Config.in
 		source package/x11r7/xcb-util-wm/Config.in
 		source package/x11r7/xlib_libFS/Config.in
package/x11r7/xcb-util-image/Config.in new file +15 -0
new file mode 100644
index 0000000..31fc61a
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_XCB_UTIL_IMAGE
+	bool "xcb-util-image"
+	select BR2_PACKAGE_XCB_UTIL
+	help
+	  The XCB util modules provides a number of libraries which sit on top
+	  of libxcb, the core X protocol library, and some of the extension
+	  libraries. These experimental libraries provide convenience functions
+	  and interfaces which make the raw X protocol more usable. Some of the
+	  libraries also provide client-side code which is not strictly part of
+	  the X protocol but which have traditionally been provided by Xlib.
+
+	  XCB util-image module provides the following library:
+	    - image: Port of Xlib's XImage and XShmImage functions.
+
+	  http://xcb.freedesktop.org/
package/x11r7/xcb-util-image/xcb-util-image.mk new file +14 -0
new file mode 100644
index 0000000..0309f3b
@@ -0,0 +1,14 @@
+#############################################################
+#
+# xcb-util-image
+#
+#############################################################
+
+XCB_UTIL_IMAGE_VERSION = 0.3.9
+XCB_UTIL_IMAGE_SITE = http://xcb.freedesktop.org/dist/
+XCB_UTIL_IMAGE_SOURCE = xcb-util-image-$(XCB_UTIL_IMAGE_VERSION).tar.bz2
+XCB_UTIL_IMAGE_INSTALL_STAGING = YES
+XCB_UTIL_IMAGE_LICENSE = MIT
+XCB_UTIL_IMAGE_DEPENDENCIES = xcb-util
+
+$(eval $(autotools-package))
Signature · 1 line
1.7.9.5
#8 lore raw

PATCH 4/34 x11r7/xcb-util-image: new package

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Signed-off-by: Thomas Petazzoni <[email protected]> Thomas> ---

 Thomas>  package/x11r7/Config.in                        |    1 +
 Thomas>  package/x11r7/xcb-util-image/Config.in         |   15 +++++++++++++++
 Thomas>  package/x11r7/xcb-util-image/xcb-util-image.mk |   14 ++++++++++++++
 Thomas>  3 files changed, 30 insertions(+)
 Thomas>  create mode 100644 package/x11r7/xcb-util-image/Config.in
 Thomas>  create mode 100644 package/x11r7/xcb-util-image/xcb-util-image.mk

Thomas> diff --git a/package/x11r7/Config.in b/package/x11r7/Config.in Thomas> index 2abd593..5d0f991 100644
Thomas> --- a/package/x11r7/Config.in
Thomas> +++ b/package/x11r7/Config.in
Thomas> @@ -15,6 +15,7 @@ if BR2_PACKAGE_XORG7

 Thomas>  		source package/x11r7/libxcb/Config.in
 Thomas>  		source package/x11r7/mesa3d/Config.in
 Thomas>  		source package/x11r7/xcb-util/Config.in
 Thomas> +		source package/x11r7/xcb-util-image/Config.in
 Thomas>  		source package/x11r7/xcb-util-keysyms/Config.in
 Thomas>  		source package/x11r7/xcb-util-wm/Config.in
 Thomas>  		source package/x11r7/xlib_libFS/Config.in

Thomas> diff --git a/package/x11r7/xcb-util-image/Config.in b/package/x11r7/xcb-util-image/Config.in Thomas> new file mode 100644
Thomas> index 0000000..31fc61a
Thomas> --- /dev/null
Thomas> +++ b/package/x11r7/xcb-util-image/Config.in
Thomas> @@ -0,0 +1,15 @@
Thomas> +config BR2_PACKAGE_XCB_UTIL_IMAGE
Thomas> + bool "xcb-util-image"
Thomas> + select BR2_PACKAGE_XCB_UTIL

Same here:

checking for XCB... no
configure: error: in `/home/peko/source/buildroot/output/build/xcb-util-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.

Alternatively, you may set the environment variables XCB_CFLAGS and XCB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.

To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
make: *** [/home/peko/source/buildroot/output/build/xcb-util-0.3.9/.stamp_configured] Error 1

Signature · 1 line
Bye, Peter Korsgaard
#9 lore raw

PATCH 5/34 package: create virtual package for libGLES, libOpenVG and libEGL

In reply to Thomas Petazzoni

Those acceleration libraries typically have multiple implementations:
some are free (Mesa), some are proprietary (generally SoC specific).

---
 package/Config.in                     |    1 +
 package/opengl/Config.in              |    8 ++++++++
 package/opengl/libegl/libegl.mk       |   16 ++++++++++++++++
 package/opengl/libgles/libgles.mk     |   16 ++++++++++++++++
 package/opengl/libopenvg/libopenvg.mk |   16 ++++++++++++++++
 package/opengl/opengl.mk              |    1 +
 6 files changed, 58 insertions(+)
 create mode 100644 package/opengl/Config.in
 create mode 100644 package/opengl/libegl/libegl.mk
 create mode 100644 package/opengl/libgles/libgles.mk
 create mode 100644 package/opengl/libopenvg/libopenvg.mk
 create mode 100644 package/opengl/opengl.mk
package/Config.in +1 -0
index 3706763..22e64f8 100644
@@ -435,6 +435,7 @@ source "package/librsvg/Config.in"
 source "package/libsvgtiny/Config.in"
 source "package/libungif/Config.in"
 source "package/opencv/Config.in"
+source "package/opengl/Config.in"
 source "package/pango/Config.in"
 source "package/pixman/Config.in"
 source "package/tiff/Config.in"
package/opengl/Config.in new file +8 -0
new file mode 100644
index 0000000..81616f9
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_HAS_OPENGL_EGL
+	bool
+
+config BR2_PACKAGE_HAS_OPENGL_ES
+	bool
+
+config BR2_PACKAGE_HAS_OPENVG
+	bool
package/opengl/libegl/libegl.mk new file +16 -0
new file mode 100644
index 0000000..56cc8ac
@@ -0,0 +1,16 @@
+#############################################################
+#
+# Virtual package for libEGL
+#
+#############################################################
+
+LIBEGL_SOURCE =
+
+ifeq ($(LIBEGL_DEPENDENCIES),y)
+define LIBEGL_CONFIGURE_CMDS
+	echo "No libEGL implementation selected. Configuration error."
+	exit 1
+endef
+endif
+
+$(eval $(generic-package))
package/opengl/libgles/libgles.mk new file +16 -0
new file mode 100644
index 0000000..753f53e
@@ -0,0 +1,16 @@
+#############################################################
+#
+# Virtual package for libGLES
+#
+#############################################################
+
+LIBGLES_SOURCE =
+
+ifeq ($(LIBGLES_DEPENDENCIES),y)
+define LIBGLES_CONFIGURE_CMDS
+	echo "No libGLES implementation selected. Configuration error."
+	exit 1
+endef
+endif
+
+$(eval $(generic-package))
package/opengl/libopenvg/libopenvg.mk new file +16 -0
new file mode 100644
index 0000000..2fcc99f
@@ -0,0 +1,16 @@
+#############################################################
+#
+# Virtual package for libOpenVG
+#
+#############################################################
+
+LIBOPENVG_SOURCE =
+
+ifeq ($(LIBOPENVG_DEPENDENCIES),y)
+define LIBOPENVG_CONFIGURE_CMDS
+	echo "No libOpenVG implementation selected. Configuration error."
+	exit 1
+endef
+endif
+
+$(eval $(generic-package))
package/opengl/opengl.mk new file +1 -0
new file mode 100644
index 0000000..68df3b1
@@ -0,0 +1 @@
+include package/opengl/*/*.mk
Signature · 1 line
1.7.9.5
#10 lore raw

PATCH 5/34 package: create virtual package for libGLES, libOpenVG and libEGL

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Those acceleration libraries typically have multiple implementations:
Thomas> some are free (Mesa), some are proprietary (generally SoC specific).

Thomas> Signed-off-by: Thomas Petazzoni <[email protected]> Thomas> ---

 Thomas>  package/Config.in                     |    1 +
 Thomas>  package/opengl/Config.in              |    8 ++++++++
 Thomas>  package/opengl/libegl/libegl.mk       |   16 ++++++++++++++++
 Thomas>  package/opengl/libgles/libgles.mk     |   16 ++++++++++++++++
 Thomas>  package/opengl/libopenvg/libopenvg.mk |   16 ++++++++++++++++
 Thomas>  package/opengl/opengl.mk              |    1 +
 Thomas>  6 files changed, 58 insertions(+)
 Thomas>  create mode 100644 package/opengl/Config.in
 Thomas>  create mode 100644 package/opengl/libegl/libegl.mk
 Thomas>  create mode 100644 package/opengl/libgles/libgles.mk
 Thomas>  create mode 100644 package/opengl/libopenvg/libopenvg.mk
 Thomas>  create mode 100644 package/opengl/opengl.mk

Committed, thanks.

I personally don't really like the opengl subdir, and I think we need to be clear about what we mean when we say opengles (E.G. v1/v2/v3), but we can fix that up later.

Signature · 1 line
Bye, Peter Korsgaard
#11 lore raw

PATCH 5/34 package: create virtual package for libGLES, libOpenVG and libEGL

Dear Peter Korsgaard,

Quoted 3 lines · Peter Korsgaard

I personally don't really like the opengl subdir, and I think we need to be clear about what we mean when we say opengles (E.G. v1/v2/v3), but we can fix that up later.

Yes, I agree with those comments. We can move things out of the opengl/ subdir as an immediate follow-up. As per the version thing, it maybe can wait until we really have a version problem, no?

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#12 lore raw

PATCH 5/34 package: create virtual package for libGLES, libOpenVG and libEGL

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Dear Peter Korsgaard,

Quoted 3 lines · Peter Korsgaard
Quoted 3 lines

I personally don't really like the opengl subdir, and I think we need to be clear about what we mean when we say opengles (E.G. v1/v2/v3), but we can fix that up later.

Thomas> Yes, I agree with those comments. We can move things out of the Thomas> opengl/ subdir as an immediate follow-up. As per the version Thomas> thing, it maybe can wait until we really have a version Thomas> problem, no?

Well, yes - But I would like to not rename symbols once they have been in a release unless we really have to, so I would prefer to think about the version issue sooner rather than later.

Signature · 1 line
Bye, Peter Korsgaard
#13 lore raw

PATCH 6/34 rpi-userland: provides OpenGL ES, EGL and OpenVG

In reply to Thomas Petazzoni
---
 package/opengl/libegl/libegl.mk       |    4 ++++
 package/opengl/libgles/libgles.mk     |    4 ++++
 package/opengl/libopenvg/libopenvg.mk |    4 ++++
 package/rpi-userland/Config.in        |    3 +++
 4 files changed, 15 insertions(+)
package/opengl/libegl/libegl.mk +4 -0
index 56cc8ac..c495496 100644
@@ -6,6 +6,10 @@
 
 LIBEGL_SOURCE =
 
+ifeq ($(BR2_PACKAGE_RPI_USERLAND),y)
+LIBEGL_DEPENDENCIES += rpi-userland
+endif
+
 ifeq ($(LIBEGL_DEPENDENCIES),y)
 define LIBEGL_CONFIGURE_CMDS
 	echo "No libEGL implementation selected. Configuration error."
package/opengl/libgles/libgles.mk +4 -0
index 753f53e..f0d0eec 100644
@@ -6,6 +6,10 @@
 
 LIBGLES_SOURCE =
 
+ifeq ($(BR2_PACKAGE_RPI_USERLAND),y)
+LIBGLES_DEPENDENCIES += rpi-userland
+endif
+
 ifeq ($(LIBGLES_DEPENDENCIES),y)
 define LIBGLES_CONFIGURE_CMDS
 	echo "No libGLES implementation selected. Configuration error."
package/opengl/libopenvg/libopenvg.mk +4 -0
index 2fcc99f..573fa78 100644
@@ -6,6 +6,10 @@
 
 LIBOPENVG_SOURCE =
 
+ifeq ($(BR2_PACKAGE_RPI_USERLAND),y)
+LIBOPENVG_DEPENDENCIES += rpi-userland
+endif
+
 ifeq ($(LIBOPENVG_DEPENDENCIES),y)
 define LIBOPENVG_CONFIGURE_CMDS
 	echo "No libOpenVG implementation selected. Configuration error."
package/rpi-userland/Config.in +3 -0
index 58ea8cb..2c35fb7 100644
@@ -3,6 +3,9 @@ config BR2_PACKAGE_RPI_USERLAND
 	depends on BR2_arm
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_LARGEFILE
+	select BR2_PACKAGE_HAS_OPENGL_EGL
+	select BR2_PACKAGE_HAS_OPENGL_ES
+	select BR2_PACKAGE_HAS_OPENVG
 	help
 	  Raspberry Pi Userland contains the necessary library to use the
 	  VideoCore driver.
Signature · 1 line
1.7.9.5
#14 lore raw

PATCH 6/34 rpi-userland: provides OpenGL ES, EGL and OpenVG

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Signed-off-by: Thomas Petazzoni <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#15 lore raw

PATCH 7/34 rpi-userland: add .pc files for OpenGLESv2 and EGL libs

In reply to Thomas Petazzoni
---
 .../rpi-userland-add-pkgconfig-files.patch         |   53 ++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 package/rpi-userland/rpi-userland-add-pkgconfig-files.patch
package/rpi-userland/rpi-userland-add-pkgconfig-files.patch new file +53 -0
new file mode 100644
index 0000000..0da9afd
@@ -0,0 +1,53 @@
+Add .pc files for the OpenGLESv2 and EGL libraries
+
+Those pkg-config files make it easier for Qt5 to find those libraries
+and the appropriate link flags.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+
+Index: b/interface/khronos/egl/egl.pc.in
+===================================================================
+--- /dev/null
++++ b/interface/khronos/egl/egl.pc.in
+@@ -0,0 +1,10 @@
++prefix=@CMAKE_INSTALL_PREFIX@
++exec_prefix=${prefix}
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
++
++Name: egl
++Description: RasberryPi implementation of EGL
++Version: 1.0
++Libs: -L${libdir} -lEGL -lGLESv2
++Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/
+Index: b/interface/khronos/CMakeLists.txt
+===================================================================
+--- a/interface/khronos/CMakeLists.txt
++++ b/interface/khronos/CMakeLists.txt
+@@ -73,3 +73,11 @@
+ 
+ install(TARGETS EGL GLESv2 OpenVG WFC khrn_client DESTINATION lib)
+ install(TARGETS EGL_static GLESv2_static khrn_static DESTINATION lib)
++configure_file("${CMAKE_CURRENT_SOURCE_DIR}/egl/egl.pc.in"
++  "${CMAKE_CURRENT_BINARY_DIR}/egl/egl.pc" @ONLY)
++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/egl/egl.pc"
++  DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
++configure_file("${CMAKE_CURRENT_SOURCE_DIR}/glxx/glesv2.pc.in"
++  "${CMAKE_CURRENT_BINARY_DIR}/glxx/glesv2.pc" @ONLY)
++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/glxx/glesv2.pc"
++  DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
+Index: b/interface/khronos/glxx/glesv2.pc.in
+===================================================================
+--- /dev/null
++++ b/interface/khronos/glxx/glesv2.pc.in
+@@ -0,0 +1,10 @@
++prefix=@CMAKE_INSTALL_PREFIX@
++exec_prefix=${prefix}
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
++
++Name: glesv2
++Description: RasberryPi implementation of OpenGL ESv2
++Version: 2.0
++Libs: -L${libdir} -lGLESv2
++Cflags: -I${includedir}/
Signature · 1 line
1.7.9.5
#16 lore raw

PATCH 8/34 rpi-userland: add bcm_host to egl.pc

In reply to Thomas Petazzoni

From: Floris Bos <[email protected]>

bcm_host is the Broadcom hardware interface library And is currently a dependency to use the EGL functions

---
 .../rpi-userland-add-pkgconfig-files.patch         |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
package/rpi-userland/rpi-userland-add-pkgconfig-files.patch +4 -3
index 0da9afd..4ffc2b0 100644
@@ -9,7 +9,7 @@ Index: b/interface/khronos/egl/egl.pc.in
 ===================================================================
 --- /dev/null
 +++ b/interface/khronos/egl/egl.pc.in
-@@ -0,0 +1,10 @@
+@@ -0,0 +1,11 @@
 +prefix=@CMAKE_INSTALL_PREFIX@
 +exec_prefix=${prefix}
 +libdir=${exec_prefix}/lib
@@ -18,8 +18,9 @@ Index: b/interface/khronos/egl/egl.pc.in
 +Name: egl
 +Description: RasberryPi implementation of EGL
 +Version: 1.0
-+Libs: -L${libdir} -lEGL -lGLESv2
-+Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/
++Libs: -L${libdir} -lEGL -lGLESv2 -lbcm_host
++Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/ \
++        -I${includedir}/interface/vmcs_host/linux/
 Index: b/interface/khronos/CMakeLists.txt
 ===================================================================
 --- a/interface/khronos/CMakeLists.txt
Signature · 1 line
1.7.9.5
#17 lore raw

PATCH 9/34 efl/libeet, efl/libevas: use host-libjpeg instead of host-jpeg

In reply to Thomas Petazzoni

Before creating a real virtual package named 'jpeg', we want to ensure that no package is using the host variant of the virtual package. Instead, we make them use directly the host-libjpeg package.

---
 package/efl/libeet/libeet.mk   |    2 +-
 package/efl/libevas/libevas.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
package/efl/libeet/libeet.mk +1 -1
index 3d5b460..db3ec6e 100644
@@ -13,7 +13,7 @@ LIBEET_LICENSE_FILES = COPYING
 LIBEET_INSTALL_STAGING = YES
 
 LIBEET_DEPENDENCIES = host-pkgconf zlib jpeg libeina
-HOST_LIBEET_DEPENDENCIES = host-pkgconf host-zlib host-jpeg host-libeina
+HOST_LIBEET_DEPENDENCIES = host-pkgconf host-zlib host-libjpeg host-libeina
 
 ifeq ($(BR2_PACKAGE_GNUTLS)$(BR2_PACKAGE_LIBGCRYPT),yy)
 LIBEET_DEPENDENCIES += gnutls libgcrypt
package/efl/libevas/libevas.mk +1 -1
index 0a90842..5bdcba5 100644
@@ -15,7 +15,7 @@ LIBEVAS_INSTALL_STAGING = YES
 LIBEVAS_DEPENDENCIES = host-pkgconf zlib libeina freetype
 
 HOST_LIBEVAS_DEPENDENCIES = host-pkgconf host-zlib host-libeina \
-				host-freetype host-libpng host-jpeg
+				host-freetype host-libpng host-libjpeg
 HOST_LIBEVAS_CONF_OPT += \
 	--enable-image-loader-png \
 	--enable-image-loader-jpeg \
Signature · 1 line
1.7.9.5
#18 lore raw

PATCH 10/34 jpeg: convert to a real package

In reply to Thomas Petazzoni

jpeg is a virtual package, but since it is listed in the dependencies of other packages, it should obey to all the normal make rules for packages. Notably, the jpeg-show-depends target is mandatory for the graph-depends script to work.

Instead to implement such a make target manually, make jpeg a normal generic-package, except that it doesn't have any source.

---
 package/jpeg/jpeg.mk |   22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
package/jpeg/jpeg.mk +18 -4
index 3caacaa..962908d 100644
@@ -1,10 +1,24 @@
 #############################################################
 #
-# jpeg
+# Virtual jpeg package
 #
 #############################################################
 
-jpeg: $(if $(BR2_PACKAGE_JPEG_TURBO),jpeg-turbo,libjpeg)
+JPEG_SOURCE =
 
-host-jpeg: host-libjpeg
-host-jpeg-source: host-libjpeg-source
+ifeq ($(BR2_PACKAGE_JPEG_TURBO),y)
+JPEG_DEPENDENCIES += jpeg-turbo
+endif
+
+ifeq ($(BR2_PACKAGE_LIBJPEG),y)
+JPEG_DEPENDENCIES += libjpeg
+endif
+
+ifeq ($(JPEG_DEPENDENCIES),)
+define JPEG_CONFIGURE_CMDS
+	echo "No JPEG implementation defined. Configuration error"
+	exit 1
+endef
+endif
+
+$(eval $(generic-package))
Signature · 1 line
1.7.9.5
#19 lore raw

PATCH 11/34 qt5: base infrastructure

In reply to Thomas Petazzoni
---
 package/qt5/Config.in |   18 ++++++++++++++++++
 package/qt5/qt5.mk    |    1 +
 2 files changed, 19 insertions(+)
 create mode 100644 package/qt5/Config.in
 create mode 100644 package/qt5/qt5.mk
package/qt5/Config.in new file +18 -0
new file mode 100644
index 0000000..0acb89e
@@ -0,0 +1,18 @@
+comment "Qt5 needs a toolchain with WCHAR, IPv6, thread and C++ support"
+	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
+
+menuconfig BR2_PACKAGE_QT5
+	bool "Qt5"
+	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_USE_WCHAR
+	depends on BR2_INET_IPV6
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	help
+	  This option enables the Qt5 framework. Sub-options allow to
+	  select which modules should be built.
+
+	  http://qt-project.org
+
+if BR2_PACKAGE_QT5
+
+endif
package/qt5/qt5.mk new file +1 -0
new file mode 100644
index 0000000..8b1a7ed
@@ -0,0 +1 @@
+include package/qt5/*/*.mk
Signature · 1 line
1.7.9.5
#20 lore raw

PATCH 12/34 qt5: add macro to fixup Qt5 .la and .prl files

In reply to Thomas Petazzoni
---
 package/qt5/qt5.mk |   10 ++++++++++
 1 file changed, 10 insertions(+)
package/qt5/qt5.mk +10 -0
index 8b1a7ed..f220508 100644
@@ -1 +1,11 @@
 include package/qt5/*/*.mk
+
+define QT5_LA_PRL_FILES_FIXUP
+	for i in $$(find $(STAGING_DIR)/usr/lib* -name "libQt5*.la"); do \
+		$(SED) "s:\(['= ]\)/usr:\\1$(STAGING_DIR)/usr:g" $$i; \
+		$(SED) "/^dependency_libs=/s%-L/usr/lib %%g" $$i ; \
+	done
+	for i in $$(find $(STAGING_DIR)/usr/lib* -name "libQt5*.prl"); do \
+		$(SED) "s%-L/usr/lib%%" $$i; \
+	done
+endef
Signature · 1 line
1.7.9.5
#21 lore raw

PATCH 13/34 qt5base: new package

In reply to Thomas Petazzoni

This is the beginning of the Qt5 packaging. This commit allows to build only the qtbase module, which contains QtCore, QtNetwork, QtXml, QtTest, QtSql and QtConcurrent.

---
 package/Config.in                               |    1 +
 package/qt5/Config.in                           |    2 +-
 package/qt5/qt5base/Config.in                   |   56 ++++++++++
 package/qt5/qt5base/qt5base-mkspecs-files.patch |   61 +++++++++++
 package/qt5/qt5base/qt5base-uclibc-no-lfs.patch |   36 +++++++
 package/qt5/qt5base/qt5base.mk                  |  131 +++++++++++++++++++++++
 6 files changed, 286 insertions(+), 1 deletion(-)
 create mode 100644 package/qt5/qt5base/Config.in
 create mode 100644 package/qt5/qt5base/qt5base-mkspecs-files.patch
 create mode 100644 package/qt5/qt5base/qt5base-uclibc-no-lfs.patch
 create mode 100644 package/qt5/qt5base/qt5base.mk
package/Config.in +1 -0
index 22e64f8..afe7440 100644
@@ -148,6 +148,7 @@ source "package/qtuio/Config.in"
 source "package/qwt/Config.in"
 endif
 
+source "package/qt5/Config.in"
 source "package/x11r7/Config.in"
 
 comment "X libraries and helper libraries"
package/qt5/Config.in +1 -1
index 0acb89e..1c9f8a6 100644
@@ -14,5 +14,5 @@ menuconfig BR2_PACKAGE_QT5
 	  http://qt-project.org
 
 if BR2_PACKAGE_QT5
-
+source "package/qt5/qt5base/Config.in"
 endif
package/qt5/qt5base/Config.in new file +56 -0

56 lines not on this page · raw message

package/qt5/qt5base/qt5base-mkspecs-files.patch new file +61 -0

61 lines not on this page · raw message

package/qt5/qt5base/qt5base-uclibc-no-lfs.patch new file +36 -0
new file mode 100644
index 0000000..9772d49
@@ -0,0 +1,36 @@
+From 6f88b27de256266947a7f6a3e70e18510754aab2 Mon Sep 17 00:00:00 2001
+From: Peter Korsgaard <[email protected]>
+Date: Sat, 14 Apr 2012 20:36:07 +0200
+Subject: [PATCH] mkspecs/common/posix: fix !largefile builds on uClibc
+
+uClibc doesn't even define O_LARGEFILE when not configured with large file
+support, so ensure this define is only used when Qt is built with
+-largefile, otherwise the build fails with:
+
+io/qtemporaryfile.cpp: In function 'bool createFileFromTemplate(
+        NativeFileHandle&, QFileSystemEntry::NativePath&, size_t, size_t,
+        QSystemError&)':
+io/qtemporaryfile.cpp:197:57: error: 'O_LARGEFILE' was not declared in
+        this scope
+
+Moved to qt5 by Thomas Petazzoni.
+
+Reported-Upstream: https://bugreports.qt-project.org/browse/QTBUG-25321
+Signed-off-by: Peter Korsgaard <[email protected]>
+
+Index: b/mkspecs/common/posix/qplatformdefs.h
+===================================================================
+--- a/mkspecs/common/posix/qplatformdefs.h
++++ b/mkspecs/common/posix/qplatformdefs.h
+@@ -123,7 +123,11 @@
+ #define QT_READ                 ::read
+ #define QT_WRITE                ::write
+ 
++#ifdef QT_LARGEFILE_SUPPORT
+ #define QT_OPEN_LARGEFILE       O_LARGEFILE
++#else
++#define QT_OPEN_LARGEFILE       0
++#endif
+ #define QT_OPEN_RDONLY          O_RDONLY
+ #define QT_OPEN_WRONLY          O_WRONLY
+ #define QT_OPEN_RDWR            O_RDWR
package/qt5/qt5base/qt5base.mk new file +131 -0

131 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#22 lore raw

PATCH 13/34 qt5base: new package

Hi, Thomas!

package/qt5/qt5base/qt5base.mk line 7

Quoted 5 lines · Thomas Petazzoni
package/qt5/qt5base/qt5base.mk new file +5 -0
+# qt5base
+#
+#############################################################
+
+QT5BASE_VERSION = 5.0.0

Why not 5.0.1, which was rolled out quite quickly after 5.0.0
with fixes for many bugs? Please see

http://blog.qt.digia.com/blog/2013/01/31/qt-5-0-1-released/

and e.g.

https://qt.gitorious.org/qt/qtbase/blobs/release/dist/changes-5.0.1

for some details.

--
Best regards,
Alexander Lukichev

#23 lore raw

PATCH 13/34 qt5base: new package

Dear Alexander Lukichev,

Quoted 8 lines · Alexander Lukichev

Why not 5.0.1, which was rolled out quite quickly after 5.0.0
with fixes for many bugs? Please see

http://blog.qt.digia.com/blog/2013/01/31/qt-5-0-1-released/

and e.g.

https://qt.gitorious.org/qt/qtbase/blobs/release/dist/changes-5.0.1

Good point, I'll update the patch set to 5.0.1, thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#24 lore raw

PATCH 14/34 qt5base: add GUI support

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/Config.in  |   44 ++++++++++++++++++++++++++++++++++++++++
 package/qt5/qt5base/qt5base.mk |   29 +++++++++++++++++++++-----
 2 files changed, 68 insertions(+), 5 deletions(-)
package/qt5/qt5base/Config.in +44 -0
index 4cd6ce0..801ef6f 100644
@@ -53,4 +53,48 @@ config BR2_PACKAGE_QT5BASE_XML
 	help
 	  This options enables the Qt5Xml library.
 
+config BR2_PACKAGE_QT5BASE_GUI
+	bool "gui module"
+	# At least one graphic backend must be enabled, so enable
+	# linuxfb if nothing is enabled.
+	select BR2_PACKAGE_QT5BASE_LINUXFB if \
+	       !BR2_PACKAGE_QT5BASE_DIRECTFB && \
+	       !BR2_PACKAGE_QT5BASE_XCB
+	help
+	  This option enables the Qt5Gui library.
+
+if BR2_PACKAGE_QT5BASE_GUI
+
+config BR2_PACKAGE_QT5BASE_WIDGETS
+	bool "widgets module"
+	help
+	  This option enables the Qt5Widgets library.
+
+config BR2_PACKAGE_QT5BASE_LINUXFB
+	bool "linuxfb support"
+
+config BR2_PACKAGE_QT5BASE_DIRECTFB
+	bool "directfb support"
+	select BR2_PACKAGE_DIRECTFB
+
+config BR2_PACKAGE_QT5BASE_XCB
+	bool "X.org XCB support"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_LIBX11
+	select BR2_PACKAGE_LIBXCB
+	select BR2_PACKAGE_XCB_UTIL_IMAGE
+	select BR2_PACKAGE_XCB_UTIL_KEYSYMS
+	select BR2_PACKAGE_XCB_UTIL_WM
+
+comment "X.org XCB backend available if X.org is enabled"
+	depends on !BR2_PACKAGE_XORG7
+
+config BR2_PACKAGE_QT5BASE_PRINTSUPPORT
+	bool "print support module"
+	select BR2_PACKAGE_QT5BASE_WIDGETS
+	help
+	  This option enables the Qt5PrintSupport
+
+endif
+
 endif
package/qt5/qt5base/qt5base.mk +24 -5
index 094ded1..7213238 100644
@@ -20,13 +20,8 @@ QT5BASE_INSTALL_STAGING = YES
 #    want to use the one packaged in Buildroot
 QT5BASE_CONFIGURE_OPTS += \
 	-optimized-qmake \
-	-no-linuxfb \
-	-no-xcb \
-	-no-directfb \
 	-no-eglfs \
 	-no-kms \
-	-no-gui \
-	-no-widgets \
 	-no-opengl \
 	-no-glib \
 	-no-cups \
@@ -61,6 +56,26 @@ QT5BASE_LICENSE = Commercial license
 QT5BASE_REDISTRIBUTE = NO
 endif
 
+# We have to use --enable-linuxfb, otherwise Qt thinks that -linuxfb
+# is to add a link against the "inuxfb" library.
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_GUI),-gui,-no-gui)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_WIDGETS),-widgets,-no-widgets)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_LINUXFB),--enable-linuxfb,-no-linuxfb)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_DIRECTFB),-directfb,-no-directfb)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_DIRECTFB),directfb)
+
+ifeq ($(BR2_PACKAGE_QT5BASE_XCB),y)
+QT5BASE_CONFIGURE_OPTS += -xcb
+QT5BASE_DEPENDENCIES   += \
+	libxcb \
+	xcb-util-wm \
+	xcb-util-image \
+	xcb-util-keysyms \
+	xlib_libX11
+else
+QT5_BASE_CONFIGURE_OPTS += -no-xcb
+endif
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
@@ -69,6 +84,10 @@ QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_SQL)        += Qt5Sql
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_TEST)       += Qt5Test
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_XML)        += Qt5Xml
 
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_GUI)          += Qt5Gui
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_WIDGETS)      += Qt5Widgets
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_PRINTSUPPORT) += Qt5PrintSupport
+
 # Ideally, we could use -device-option to substitute variable values
 # in our linux-buildroot-g++/qmake.config, but this mechanism doesn't
 # nicely support variable values that contain spaces. So we use the
Signature · 1 line
1.7.9.5
#25 lore raw

PATCH 14/34 qt5base: add GUI support

Hi Thomas,

Quoted 89 lines · Thomas Petazzoni
---
 package/qt5/qt5base/Config.in  |   44 ++++++++++++++++++++++++++++++++++++++++
 package/qt5/qt5base/qt5base.mk |   29 +++++++++++++++++++++-----
 2 files changed, 68 insertions(+), 5 deletions(-)
package/qt5/qt5base/Config.in +44 -0
index 4cd6ce0..801ef6f 100644
@@ -53,4 +53,48 @@ config BR2_PACKAGE_QT5BASE_XML
        help
          This options enables the Qt5Xml library.
 
+config BR2_PACKAGE_QT5BASE_GUI
+       bool "gui module"
+       # At least one graphic backend must be enabled, so enable
+       # linuxfb if nothing is enabled.
+       select BR2_PACKAGE_QT5BASE_LINUXFB if \
+              !BR2_PACKAGE_QT5BASE_DIRECTFB && \
+              !BR2_PACKAGE_QT5BASE_XCB
+       help
+         This option enables the Qt5Gui library.
+
+if BR2_PACKAGE_QT5BASE_GUI
+
+config BR2_PACKAGE_QT5BASE_WIDGETS
+       bool "widgets module"
+       help
+         This option enables the Qt5Widgets library.
+
+config BR2_PACKAGE_QT5BASE_LINUXFB
+       bool "linuxfb support"
+
+config BR2_PACKAGE_QT5BASE_DIRECTFB
+       bool "directfb support"
+       select BR2_PACKAGE_DIRECTFB
+
+config BR2_PACKAGE_QT5BASE_XCB
+       bool "X.org XCB support"
+       depends on BR2_PACKAGE_XORG7
+       select BR2_PACKAGE_LIBX11
+       select BR2_PACKAGE_LIBXCB
+       select BR2_PACKAGE_XCB_UTIL_IMAGE
+       select BR2_PACKAGE_XCB_UTIL_KEYSYMS
+       select BR2_PACKAGE_XCB_UTIL_WM
+
+comment "X.org XCB backend available if X.org is enabled"
+       depends on !BR2_PACKAGE_XORG7
+
+config BR2_PACKAGE_QT5BASE_PRINTSUPPORT
+       bool "print support module"
+       select BR2_PACKAGE_QT5BASE_WIDGETS
+       help
+         This option enables the Qt5PrintSupport
+
+endif
+
 endif
package/qt5/qt5base/qt5base.mk +8 -5
index 094ded1..7213238 100644
@@ -20,13 +20,8 @@ QT5BASE_INSTALL_STAGING = YES
 #    want to use the one packaged in Buildroot
 QT5BASE_CONFIGURE_OPTS += \
        -optimized-qmake \
-       -no-linuxfb \
-       -no-xcb \
-       -no-directfb \
        -no-eglfs \
        -no-kms \
-       -no-gui \
-       -no-widgets \
        -no-opengl \
        -no-glib \
        -no-cups \
@@ -61,6 +56,26 @@ QT5BASE_LICENSE = Commercial license
 QT5BASE_REDISTRIBUTE = NO
 endif
 
+# We have to use --enable-linuxfb, otherwise Qt thinks that -linuxfb
+# is to add a link against the "inuxfb" library.
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_GUI),-gui,-no-gui)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_WIDGETS),-widgets,-no-widgets)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_LINUXFB),--enable-linuxfb,-no-linuxfb)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_DIRECTFB),-directfb,-no-directfb)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_DIRECTFB),directfb)
+

package/qt5/qt5base/qt5base.mk QT5BASE_LICENSE = Commercial license · line 76

Quoted 10 lines
package/qt5/qt5base/qt5base.mk +10 -0
+ifeq ($(BR2_PACKAGE_QT5BASE_XCB),y)
+QT5BASE_CONFIGURE_OPTS += -xcb
+QT5BASE_DEPENDENCIES   += \
+       libxcb \
+       xcb-util-wm \
+       xcb-util-image \
+       xcb-util-keysyms \
+       xlib_libX11
+else
+QT5_BASE_CONFIGURE_OPTS += -no-xcb

typo here: should be

QT5BASE_CONFIGURE_OPTS += -no-xcb

Quoted 19 lines
package/qt5/qt5base/qt5base.mk +6 -1
+endif
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
@@ -69,6 +84,10 @@ QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_SQL)        += Qt5Sql
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_TEST)       += Qt5Test
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_XML)        += Qt5Xml
 
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_GUI)          += Qt5Gui
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_WIDGETS)      += Qt5Widgets
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_PRINTSUPPORT) += Qt5PrintSupport
+
 # Ideally, we could use -device-option to substitute variable values
 # in our linux-buildroot-g++/qmake.config, but this mechanism doesn't
 # nicely support variable values that contain spaces. So we use the
--

1.7.9.5

Quoted 4 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Best regards,
Lionel

#26 lore raw

PATCH 14/34 qt5base: add GUI support

Dear Lionel Orry,

Quoted 5 lines · Lionel Orry
Quoted 1 line

+QT5_BASE_CONFIGURE_OPTS += -no-xcb

typo here: should be

QT5BASE_CONFIGURE_OPTS += -no-xcb

Well spotted, thanks! I'm fixing this.

Thanks a lot for your review,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#27 lore raw

PATCH 14/34 qt5base: add GUI support

Hi Thomas,

Quoted 6 lines · Thomas Petazzoni

Dear Lionel Orry,

Quoted 2 lines · Lionel Orry
Quoted 1 line

+QT5_BASE_CONFIGURE_OPTS += -no-xcb

Quoted 7 lines
Quoted 3 lines

typo here: should be

QT5BASE_CONFIGURE_OPTS += -no-xcb

Well spotted, thanks! I'm fixing this.

Thanks a lot for your review,

You're welcome. While I'm at it, I switched to 5.0.1 and noticed the "-fast" option to configure is not recognised. I suppose the equivalent options are (extract from ./configure -help):

* -process ........... Generate only a top-level Makefile. -fully-process ..... Generate Makefiles for the entire Qt tree. -dont-process ...... Do not generate any Makefiles.

Quoted 7 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Regards,
Lionel

#28 lore raw

PATCH 14/34 qt5base: add GUI support

Dear Lionel Orry,

Quoted 2 lines · Lionel Orry

You're welcome. While I'm at it, I switched to 5.0.1 and noticed the "-fast" option to configure is not recognised.

Yes, I also moved to 5.0.1. I simply removed this option. I will repost an updated version of my patch set, hopefully this afternoon.

Quoted 6 lines

I suppose the
equivalent options are (extract from ./configure -help):

* -process ........... Generate only a top-level Makefile. -fully-process ..... Generate Makefiles for the entire Qt tree. -dont-process ...... Do not generate any Makefiles.

Hum, yes, maybe. Not sure which one is the correct choice, though. I've just left the default value and it seems to work nicely.

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#29 lore raw

PATCH 15/34 qt5base: support debug or release modes

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/qt5base.mk |    6 ++++++
 1 file changed, 6 insertions(+)
package/qt5/qt5base/qt5base.mk +6 -0
index 7213238..41e7779 100644
@@ -41,6 +41,12 @@ QT5BASE_CONFIGURE_OPTS += \
 	-system-pcre \
 	-no-pch
 
+ifeq ($(BR2_ENABLE_DEBUG),y)
+QT5BASE_CONFIGURE_OPTS += -debug
+else
+QT5BASE_CONFIGURE_OPTS += -release
+endif
+
 ifeq ($(BR2_LARGEFILE),y)
 QT5BASE_CONFIGURE_OPTS += -largefile
 else
Signature · 1 line
1.7.9.5
#30 lore raw

PATCH 16/34 qt5base: add OpenSSL support

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/Config.in  |    8 ++++++++
 package/qt5/qt5base/qt5base.mk |    4 +++-
 2 files changed, 11 insertions(+), 1 deletion(-)
package/qt5/qt5base/Config.in +8 -0
index 801ef6f..540c8b2 100644
@@ -33,6 +33,14 @@ config BR2_PACKAGE_QT5BASE_NETWORK
 	help
 	  This options enables the Qt5Network library.
 
+config BR2_PACKAGE_QT5BASE_NETWORK_OPENSSL
+	bool "OpenSSL support"
+	select BR2_PACKAGE_OPENSSL
+	depends on BR2_PACKAGE_QT5BASE_NETWORK
+	help
+	  This option enables the OpenSSL support in the Qt5Network
+	  library.
+
 config BR2_PACKAGE_QT5BASE_CONCURRENT
 	bool "concurrent module"
 	help
package/qt5/qt5base/qt5base.mk +3 -1
index 41e7779..79cbc48 100644
@@ -28,7 +28,6 @@ QT5BASE_CONFIGURE_OPTS += \
 	-no-nis \
 	-no-libudev \
 	-no-iconv \
-	-no-openssl \
 	-no-fontconfig \
 	-no-gif \
 	-no-libpng \
@@ -82,6 +81,9 @@ else
 QT5_BASE_CONFIGURE_OPTS += -no-xcb
 endif
 
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_OPENSSL),-openssl,-no-openssl)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_OPENSSL),openssl)
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
Signature · 1 line
1.7.9.5
#31 lore raw

PATCH 17/34 qt5base: add eglfs graphics backend

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/Config.in                      |   11 ++++++-
 ...nce-add-egl-to-CONFIG-to-get-correct-incl.patch |   32 ++++++++++++++++++++
 package/qt5/qt5base/qt5base.mk                     |    9 ++++--
 3 files changed, 49 insertions(+), 3 deletions(-)
 create mode 100644 package/qt5/qt5base/qt5base-eglconvenience-add-egl-to-CONFIG-to-get-correct-incl.patch
package/qt5/qt5base/Config.in +10 -1
index 540c8b2..e91c405 100644
@@ -67,7 +67,8 @@ config BR2_PACKAGE_QT5BASE_GUI
 	# linuxfb if nothing is enabled.
 	select BR2_PACKAGE_QT5BASE_LINUXFB if \
 	       !BR2_PACKAGE_QT5BASE_DIRECTFB && \
-	       !BR2_PACKAGE_QT5BASE_XCB
+	       !BR2_PACKAGE_QT5BASE_XCB && \
+	       !BR2_PACKAGE_QT5BASE_EGLFS
 	help
 	  This option enables the Qt5Gui library.
 
@@ -97,6 +98,14 @@ config BR2_PACKAGE_QT5BASE_XCB
 comment "X.org XCB backend available if X.org is enabled"
 	depends on !BR2_PACKAGE_XORG7
 
+config BR2_PACKAGE_QT5BASE_EGLFS
+	bool "eglfs support"
+	depends on BR2_PACKAGE_HAS_OPENGL_EGL
+	depends on BR2_PACKAGE_HAS_OPENGL_ES
+
+comment "eglfs backend available if OpenGLES and EGL are enabled"
+	depends on !BR2_PACKAGE_HAS_OPENGL_EGL || !BR2_PACKAGE_HAS_OPENGL_ES
+
 config BR2_PACKAGE_QT5BASE_PRINTSUPPORT
 	bool "print support module"
 	select BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/qt5base-eglconvenience-add-egl-to-CONFIG-to-get-correct-incl.patch new file +32 -0
new file mode 100644
index 0000000..a85a5aa
@@ -0,0 +1,32 @@
+From 588c60d0c3d11e79d19860fa62b03c935658d13a Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Sun, 13 Jan 2013 14:36:48 +0100
+Subject: [PATCH qtbase] eglconvenience: add egl to CONFIG to get correct include
+ paths
+
+The eglconvenience code includes <EGL/egl.h>. Therefore, it should get
+the appropriate EGL-specific include paths from QMAKE_INCDIR_EGL,
+otherwise the build might if the EGL library has its headers in
+special locations. In order to achieve this, we simply add the "egl"
+feature to the list of features imported by eglconvenience.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+---
+ .../eglconvenience/eglconvenience.pri              |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/platformsupport/eglconvenience/eglconvenience.pri b/src/platformsupport/eglconvenience/eglconvenience.pri
+index 188eb1c..8996cea 100644
+--- a/src/platformsupport/eglconvenience/eglconvenience.pri
++++ b/src/platformsupport/eglconvenience/eglconvenience.pri
+@@ -5,6 +5,7 @@ contains(QT_CONFIG,egl) {
+     SOURCES += \
+         $$PWD/qeglconvenience.cpp \
+         $$PWD/qeglplatformcontext.cpp
++    CONFIG += egl
+ 
+     contains(QT_CONFIG,xlib) {
+         HEADERS += \
+-- 
+1.7.9.5
+
package/qt5/qt5base/qt5base.mk +7 -2
index 79cbc48..3e8bde1 100644
@@ -20,9 +20,7 @@ QT5BASE_INSTALL_STAGING = YES
 #    want to use the one packaged in Buildroot
 QT5BASE_CONFIGURE_OPTS += \
 	-optimized-qmake \
-	-no-eglfs \
 	-no-kms \
-	-no-opengl \
 	-no-glib \
 	-no-cups \
 	-no-nis \
@@ -81,6 +79,13 @@ else
 QT5_BASE_CONFIGURE_OPTS += -no-xcb
 endif
 
+ifeq ($(BR2_PACKAGE_QT5BASE_EGLFS),y)
+QT5BASE_CONFIGURE_OPTS += -opengl es2 -eglfs
+QT5BASE_DEPENDENCIES   += libgles libegl
+else
+QT5BASE_CONFIGURE_OPTS += -no-opengl -no-eglfs
+endif
+
 QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_OPENSSL),-openssl,-no-openssl)
 QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_OPENSSL),openssl)
 
Signature · 1 line
1.7.9.5
#32 lore raw

PATCH 18/34 qt5base: add support for fontconfig, png, jpeg, gif

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/Config.in  |   26 ++++++++++++++++++++++++++
 package/qt5/qt5base/qt5base.mk |   12 ++++++++----
 2 files changed, 34 insertions(+), 4 deletions(-)
package/qt5/qt5base/Config.in +26 -0
index e91c405..08e3c16 100644
@@ -112,6 +112,32 @@ config BR2_PACKAGE_QT5BASE_PRINTSUPPORT
 	help
 	  This option enables the Qt5PrintSupport
 
+config BR2_PACKAGE_QT5BASE_FONTCONFIG
+	bool "fontconfig support"
+	select BR2_PACKAGE_FONTCONFIG
+	help
+	  This option enables Fontconfig and Freetype support using
+	  the system fontconfig and freetype2 libraries.
+
+config BR2_PACKAGE_QT5BASE_GIF
+	bool "GIF support"
+	help
+	  This compiles and installs the plugin for GIF reading support.
+
+config BR2_PACKAGE_QT5BASE_JPEG
+	bool "JPEG support"
+	select BR2_PACKAGE_JPEG
+	help
+	  This option enables JPEG support using the system libjpeg
+	  library.
+
+config BR2_PACKAGE_QT5BASE_PNG
+	bool "PNG support"
+	select BR2_PACKAGE_LIBPNG
+	help
+	  This option enables PNG support using the system libpng
+	  library.
+
 endif
 
 endif
package/qt5/qt5base/qt5base.mk +8 -4
index 3e8bde1..ac25f17 100644
@@ -26,10 +26,6 @@ QT5BASE_CONFIGURE_OPTS += \
 	-no-nis \
 	-no-libudev \
 	-no-iconv \
-	-no-fontconfig \
-	-no-gif \
-	-no-libpng \
-	-no-libjpeg \
 	-no-icu \
 	-no-dbus \
 	-no-gstreamer \
@@ -89,6 +85,14 @@ endif
 QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_OPENSSL),-openssl,-no-openssl)
 QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_OPENSSL),openssl)
 
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_FONTCONFIG),-fontconfig,-no-fontconfig)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_FONTCONFIG),fontconfig)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_GIF),,-no-gif)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_JPEG),-system-libjpeg,-no-libjpeg)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_JPEG),jpeg)
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_PNG),-system-libpng,-no-libpng)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_PNG),libpng)
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
Signature · 1 line
1.7.9.5
#33 lore raw

PATCH 19/34 qt5base: add D-Bus support

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/Config.in  |    8 ++++++++
 package/qt5/qt5base/qt5base.mk |    6 +++++-
 2 files changed, 13 insertions(+), 1 deletion(-)
package/qt5/qt5base/Config.in +8 -0
index 08e3c16..baf471f 100644
@@ -140,4 +140,12 @@ config BR2_PACKAGE_QT5BASE_PNG
 
 endif
 
+config BR2_PACKAGE_QT5BASE_DBUS
+	bool "DBus module"
+	select BR2_PACKAGE_DBUS
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_USE_MMU
+	help
+	  This option enables the D-Bus module.
+
 endif
package/qt5/qt5base/qt5base.mk +5 -1
index ac25f17..7988ce2 100644
@@ -27,7 +27,6 @@ QT5BASE_CONFIGURE_OPTS += \
 	-no-libudev \
 	-no-iconv \
 	-no-icu \
-	-no-dbus \
 	-no-gstreamer \
 	-no-gtkstyle \
 	-system-zlib \
@@ -93,6 +92,9 @@ QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_JPEG),jpeg)
 QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_PNG),-system-libpng,-no-libpng)
 QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_PNG),libpng)
 
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_DBUS),-dbus,-no-dbus)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_DBUS),dbus)
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
@@ -105,6 +107,8 @@ QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_GUI)          += Qt5Gui
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_WIDGETS)      += Qt5Widgets
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_PRINTSUPPORT) += Qt5PrintSupport
 
+QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_DBUS) += Qt5DBus
+
 # Ideally, we could use -device-option to substitute variable values
 # in our linux-buildroot-g++/qmake.config, but this mechanism doesn't
 # nicely support variable values that contain spaces. So we use the
Signature · 1 line
1.7.9.5
#34 lore raw

PATCH 20/34 qt5base: add glib support

In reply to Thomas Petazzoni
---
 package/qt5/qt5base/qt5base.mk |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/qt5/qt5base/qt5base.mk +3 -1
index 7988ce2..414410a 100644
@@ -21,7 +21,6 @@ QT5BASE_INSTALL_STAGING = YES
 QT5BASE_CONFIGURE_OPTS += \
 	-optimized-qmake \
 	-no-kms \
-	-no-glib \
 	-no-cups \
 	-no-nis \
 	-no-libudev \
@@ -95,6 +94,9 @@ QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_PNG),libpng)
 QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_DBUS),-dbus,-no-dbus)
 QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_DBUS),dbus)
 
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_LIBGLIB2),-glib,-no-glib)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_LIBGLIB2),libglib2)
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
Signature · 1 line
1.7.9.5
#35 lore raw

PATCH 21/34 qt5base: add support to build against ICU

In reply to Thomas Petazzoni

Qt5Webkit requires Qt5Base to be built with ICU support, so we add such support.

---
 package/qt5/qt5base/Config.in  |    7 +++++++
 package/qt5/qt5base/qt5base.mk |    4 +++-
 2 files changed, 10 insertions(+), 1 deletion(-)
package/qt5/qt5base/Config.in +7 -0
index baf471f..71c2ccd 100644
@@ -148,4 +148,11 @@ config BR2_PACKAGE_QT5BASE_DBUS
 	help
 	  This option enables the D-Bus module.
 
+config BR2_PACKAGE_QT5BASE_ICU
+	bool "Enable ICU support"
+	select BR2_PACKAGE_ICU
+	help
+	  This option enables ICU support in Qt5. This is for example
+	  needed for Qt5Webkit.
+
 endif
package/qt5/qt5base/qt5base.mk +3 -1
index 414410a..865377f 100644
@@ -25,7 +25,6 @@ QT5BASE_CONFIGURE_OPTS += \
 	-no-nis \
 	-no-libudev \
 	-no-iconv \
-	-no-icu \
 	-no-gstreamer \
 	-no-gtkstyle \
 	-system-zlib \
@@ -97,6 +96,9 @@ QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_DBUS),dbus)
 QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_LIBGLIB2),-glib,-no-glib)
 QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_LIBGLIB2),libglib2)
 
+QT5BASE_CONFIGURE_OPTS += $(if $(BR2_PACKAGE_QT5BASE_ICU),-icu,-no-icu)
+QT5BASE_DEPENDENCIES   += $(if $(BR2_PACKAGE_QT5BASE_ICU),icu)
+
 # Build the list of libraries to be installed on the target
 QT5BASE_INSTALL_LIBS_y                                 += Qt5Core
 QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_NETWORK)    += Qt5Network
Signature · 1 line
1.7.9.5
#36 lore raw

PATCH 22/34 qt5base: add rPi EGL glue code

In reply to Thomas Petazzoni

From: Floris Bos <[email protected]>

When the rpi-userland package is selected, assume we are targetting the Raspberry Pi, and add the right platform glue code when building the Qt5 EGLFS plugin.

---
 package/qt5/qt5base/qt5base-mkspecs-files.patch |    5 ++++-
 package/qt5/qt5base/qt5base.mk                  |    6 ++++++
 2 files changed, 10 insertions(+), 1 deletion(-)
package/qt5/qt5base/qt5base-mkspecs-files.patch +4 -1
index a86d0b1..d5827f6 100644
@@ -14,7 +14,7 @@ Index: b/mkspecs/devices/linux-buildroot-g++/qmake.conf
 ===================================================================
 --- /dev/null
 +++ b/mkspecs/devices/linux-buildroot-g++/qmake.conf
-@@ -0,0 +1,38 @@
+@@ -0,0 +1,41 @@
 +MAKEFILE_GENERATOR      = UNIX
 +CONFIG                  += incremental gdb_dwarf_index
 +QMAKE_INCREMENTAL_STYLE = sublib
@@ -49,6 +49,9 @@ Index: b/mkspecs/devices/linux-buildroot-g++/qmake.conf
 +
 +QMAKE_LIBS             += -lrt -lpthread -ldl
 +
++# device specific glue code
++EGLFS_PLATFORM_HOOKS_SOURCES =
++
 +# Sanity check
 +deviceSanityCheckCompiler()
 +
package/qt5/qt5base/qt5base.mk +6 -0
index 865377f..953e194 100644
@@ -75,6 +75,10 @@ endif
 ifeq ($(BR2_PACKAGE_QT5BASE_EGLFS),y)
 QT5BASE_CONFIGURE_OPTS += -opengl es2 -eglfs
 QT5BASE_DEPENDENCIES   += libgles libegl
+ifeq ($(BR2_PACKAGE_RPI_USERLAND),y)
+QT5BASE_EGLFS_PLATFORM_HOOKS_SOURCES = \
+	$(@D)/mkspecs/devices/linux-rasp-pi-g++/qeglfshooks_pi.cpp
+endif
 else
 QT5BASE_CONFIGURE_OPTS += -no-opengl -no-eglfs
 endif
@@ -125,6 +129,8 @@ define QT5BASE_CONFIGURE_CMDS
 	$(call QT5BASE_CONFIG_SET,CROSS_COMPILE,$(TARGET_CROSS))
 	$(call QT5BASE_CONFIG_SET,COMPILER_CFLAGS,$(TARGET_CFLAGS))
 	$(call QT5BASE_CONFIG_SET,COMPILER_CXXFLAGS,$(TARGET_CXXFLAGS))
+	$(call QT5BASE_CONFIG_SET,EGLFS_PLATFORM_HOOKS_SOURCES, \
+		$(QT5BASE_EGLFS_PLATFORM_HOOKS_SOURCES))
 	(cd $(@D); \
 		PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
 		PKG_CONFIG_LIBDIR="$(STAGING_DIR)/usr/lib/pkgconfig" \
Signature · 1 line
1.7.9.5
#37 lore raw

PATCH 23/34 qt5base: install bundled fonts to target

In reply to Thomas Petazzoni

From: Floris Bos <[email protected]>

If not using font-config, Qt 5 offers a set of standard fonts to use instead. Install these to target.

---
 package/qt5/qt5base/qt5base.mk |    8 ++++++++
 1 file changed, 8 insertions(+)
package/qt5/qt5base/qt5base.mk +8 -0
index 953e194..31d6dff 100644
@@ -173,9 +173,17 @@ define QT5BASE_INSTALL_TARGET_PLUGINS
 	fi
 endef
 
+define QT5BASE_INSTALL_TARGET_FONTS
+	if [ -d $(STAGING_DIR)/usr/lib/fonts/ ] ; then \
+		mkdir -p $(TARGET_DIR)/usr/lib/fonts ; \
+		cp -dpfr $(STAGING_DIR)/usr/lib/fonts/* $(TARGET_DIR)/usr/lib/fonts ; \
+	fi
+endef
+
 define QT5BASE_INSTALL_TARGET_CMDS
 	$(QT5BASE_INSTALL_TARGET_LIBS)
 	$(QT5BASE_INSTALL_TARGET_PLUGINS)
+	$(QT5BASE_INSTALL_TARGET_FONTS)
 endef
 
 $(eval $(generic-package))
Signature · 1 line
1.7.9.5
#38 lore raw

PATCH 24/34 qt5: factor Qt5 version

In reply to Thomas Petazzoni

Since the Qt5 version will be the same for all Qt5 modules, factor it in qt5/qt5.mk as QT5_VERSION.

---
 package/qt5/qt5.mk             |    1 +
 package/qt5/qt5base/qt5base.mk |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
package/qt5/qt5.mk +1 -0
index f220508..0c6d0f9 100644
@@ -1,3 +1,4 @@
+QT5_VERSION = 5.0.0
 include package/qt5/*/*.mk
 
 define QT5_LA_PRL_FILES_FIXUP
package/qt5/qt5base/qt5base.mk +1 -1
index 31d6dff..fc08b77 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-QT5BASE_VERSION = 5.0.0
+QT5BASE_VERSION = $(QT5_VERSION)
 QT5BASE_SITE = http://releases.qt-project.org/qt5/$(QT5BASE_VERSION)/submodules_tar/
 QT5BASE_SOURCE = qtbase-opensource-src-$(QT5BASE_VERSION).tar.xz
 
Signature · 1 line
1.7.9.5
#39 lore raw

PATCH 25/34 qt5/qt5svg: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in        |    1 +
 package/qt5/qt5svg/Config.in |   11 ++++++++++
 package/qt5/qt5svg/qt5svg.mk |   47 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 59 insertions(+)
 create mode 100644 package/qt5/qt5svg/Config.in
 create mode 100644 package/qt5/qt5svg/qt5svg.mk
package/qt5/Config.in +1 -0
index 1c9f8a6..f4d2b45 100644
@@ -15,4 +15,5 @@ menuconfig BR2_PACKAGE_QT5
 
 if BR2_PACKAGE_QT5
 source "package/qt5/qt5base/Config.in"
+source "package/qt5/qt5svg/Config.in"
 endif
package/qt5/qt5svg/Config.in new file +11 -0
new file mode 100644
index 0000000..27e6b05
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_QT5SVG
+	bool "qt5svg"
+	select BR2_PACKAGE_QT5BASE
+	select BR2_PACKAGE_QT5BASE_GUI
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5svg module.
+
+	  http://qt-project.org
package/qt5/qt5svg/qt5svg.mk new file +47 -0

47 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#40 lore raw

PATCH 26/34 qt5/qt5script: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in              |    1 +
 package/qt5/qt5script/Config.in    |   10 +++++++++
 package/qt5/qt5script/qt5script.mk |   41 ++++++++++++++++++++++++++++++++++++
 3 files changed, 52 insertions(+)
 create mode 100644 package/qt5/qt5script/Config.in
 create mode 100644 package/qt5/qt5script/qt5script.mk
package/qt5/Config.in +1 -0
index f4d2b45..3f303e2 100644
@@ -15,5 +15,6 @@ menuconfig BR2_PACKAGE_QT5
 
 if BR2_PACKAGE_QT5
 source "package/qt5/qt5base/Config.in"
+source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
 endif
package/qt5/qt5script/Config.in new file +10 -0
new file mode 100644
index 0000000..3c5d60c
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_QT5SCRIPT
+	bool "qt5script"
+	select BR2_PACKAGE_QT5BASE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5script module.
+
+	  http://qt-project.org
package/qt5/qt5script/qt5script.mk new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#41 lore raw

PATCH 27/34 qt5/qt5imageformats: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in                          |    1 +
 package/qt5/qt5imageformats/Config.in          |   10 ++++++
 package/qt5/qt5imageformats/qt5imageformats.mk |   39 ++++++++++++++++++++++++
 3 files changed, 50 insertions(+)
 create mode 100644 package/qt5/qt5imageformats/Config.in
 create mode 100644 package/qt5/qt5imageformats/qt5imageformats.mk
package/qt5/Config.in +1 -0
index 3f303e2..397f9c2 100644
@@ -15,6 +15,7 @@ menuconfig BR2_PACKAGE_QT5
 
 if BR2_PACKAGE_QT5
 source "package/qt5/qt5base/Config.in"
+source "package/qt5/qt5imageformats/Config.in"
 source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
 endif
package/qt5/qt5imageformats/Config.in new file +10 -0
new file mode 100644
index 0000000..d37e08f
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_QT5IMAGEFORMATS
+	bool "qt5imageformats"
+	select BR2_PACKAGE_QT5BASE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5imageformats module.
+
+	  http://qt-project.org
package/qt5/qt5imageformats/qt5imageformats.mk new file +39 -0
new file mode 100644
index 0000000..c40d545
@@ -0,0 +1,39 @@
+#############################################################
+#
+# qt5imageformats
+#
+#############################################################
+
+QT5IMAGEFORMATS_VERSION = $(QT5_VERSION)
+QT5IMAGEFORMATS_SITE = http://releases.qt-project.org/qt5/$(QT5IMAGEFORMATS_VERSION)/submodules_tar/
+QT5IMAGEFORMATS_SOURCE = qtimageformats-opensource-src-$(QT5IMAGEFORMATS_VERSION).tar.xz
+QT5IMAGEFORMATS_DEPENDENCIES = qt5base
+QT5IMAGEFORMATS_INSTALL_STAGING = YES
+
+ifeq ($(BR2_PACKAGE_QT5BASE_LICENSE_APPROVED),y)
+QT5IMAGEFORMATS_CONFIGURE_OPTS += -opensource -confirm-license
+QT5IMAGEFORMATS_LICENSE = LGPLv2.1 or GPLv3.0
+# Here we would like to get license files from qt5base, but qt5base
+# may not be extracted at the time we get the legal-info for qt5svg.
+else
+QT5IMAGEFORMATS_LICENSE = Commercial license
+QT5IMAGEFORMATS_REDISTRIBUTE = NO
+endif
+
+define QT5IMAGEFORMATS_CONFIGURE_CMDS
+	(cd $(@D); $(HOST_DIR)/usr/bin/qmake)
+endef
+
+define QT5IMAGEFORMATS_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D)
+endef
+
+define QT5IMAGEFORMATS_INSTALL_STAGING_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) install
+endef
+
+define QT5IMAGEFORMATS_INSTALL_TARGET_CMDS
+	cp -dpf $(STAGING_DIR)/usr/lib/qt/plugins/imageformats/*.so $(TARGET_DIR)/usr/lib/qt/plugins/imageformats/
+endef
+
+$(eval $(generic-package))
Signature · 1 line
1.7.9.5
#42 lore raw

PATCH 28/34 qt5/qt5xmlpatterns: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in                        |    1 +
 package/qt5/qt5xmlpatterns/Config.in         |   10 +++++++
 package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk |   41 ++++++++++++++++++++++++++
 3 files changed, 52 insertions(+)
 create mode 100644 package/qt5/qt5xmlpatterns/Config.in
 create mode 100644 package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk
package/qt5/Config.in +1 -0
index 397f9c2..3979fa5 100644
@@ -18,4 +18,5 @@ source "package/qt5/qt5base/Config.in"
 source "package/qt5/qt5imageformats/Config.in"
 source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
+source "package/qt5/qt5xmlpatterns/Config.in"
 endif
package/qt5/qt5xmlpatterns/Config.in new file +10 -0
new file mode 100644
index 0000000..6ea7466
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_QT5XMLPATTERNS
+	bool "qt5xmlpatterns"
+	select BR2_PACKAGE_QT5BASE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5xmlpatterns module.
+
+	  http://qt-project.org
package/qt5/qt5xmlpatterns/qt5xmlpatterns.mk new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#43 lore raw

PATCH 29/34 qt5/qt5jsbackend: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in                              |    1 +
 package/qt5/qt5jsbackend/Config.in                 |   10 +++++
 .../qt5/qt5jsbackend/qt5jsbackend-fix-uclibc.patch |   33 ++++++++++++++++
 package/qt5/qt5jsbackend/qt5jsbackend.mk           |   41 ++++++++++++++++++++
 4 files changed, 85 insertions(+)
 create mode 100644 package/qt5/qt5jsbackend/Config.in
 create mode 100644 package/qt5/qt5jsbackend/qt5jsbackend-fix-uclibc.patch
 create mode 100644 package/qt5/qt5jsbackend/qt5jsbackend.mk
package/qt5/Config.in +1 -0
index 3979fa5..8a4ed53 100644
@@ -16,6 +16,7 @@ menuconfig BR2_PACKAGE_QT5
 if BR2_PACKAGE_QT5
 source "package/qt5/qt5base/Config.in"
 source "package/qt5/qt5imageformats/Config.in"
+source "package/qt5/qt5jsbackend/Config.in"
 source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
 source "package/qt5/qt5xmlpatterns/Config.in"
package/qt5/qt5jsbackend/Config.in new file +10 -0
new file mode 100644
index 0000000..89d5067
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_QT5JSBACKEND
+	bool "qt5jsbackend"
+	select BR2_PACKAGE_QT5BASE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5jsbackend module.
+
+	  http://qt-project.org
package/qt5/qt5jsbackend/qt5jsbackend-fix-uclibc.patch new file +33 -0
new file mode 100644
index 0000000..50a6dbc
@@ -0,0 +1,33 @@
+Fix build on uClibc
+
+Patch taken from https://code.google.com/p/v8/source/detail?r=12094.
+
+Review URL: https://chromiumcodereview.appspot.com/10784012
+Patch from Remi Duraffort <[email protected]>.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+
+Index: qt5jsbackend-5.0.0/src/3rdparty/v8/src/platform-linux.cc
+===================================================================
+--- qt5jsbackend-5.0.0.orig/src/3rdparty/v8/src/platform-linux.cc	2012-12-18 20:04:01.000000000 +0100
++++ qt5jsbackend-5.0.0/src/3rdparty/v8/src/platform-linux.cc	2013-03-03 20:31:46.000000000 +0100
+@@ -1030,7 +1030,8 @@
+   sample->fp = reinterpret_cast<Address>(mcontext.gregs[REG_RBP]);
+ #elif V8_HOST_ARCH_ARM
+ // An undefined macro evaluates to 0, so this applies to Android's Bionic also.
+-#if (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ <= 3))
++#if (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ <= 3) && \
++     !defined(__UCLIBC__))
+   sample->pc = reinterpret_cast<Address>(mcontext.gregs[R15]);
+   sample->sp = reinterpret_cast<Address>(mcontext.gregs[R13]);
+   sample->fp = reinterpret_cast<Address>(mcontext.gregs[R11]);
+@@ -1038,7 +1039,8 @@
+   sample->pc = reinterpret_cast<Address>(mcontext.arm_pc);
+   sample->sp = reinterpret_cast<Address>(mcontext.arm_sp);
+   sample->fp = reinterpret_cast<Address>(mcontext.arm_fp);
+-#endif  // (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ <= 3))
++#endif  // (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ <= 3) &&
++        // !defined(__UCLIBC__))
+ #elif V8_HOST_ARCH_MIPS
+   sample->pc = reinterpret_cast<Address>(mcontext.pc);
+   sample->sp = reinterpret_cast<Address>(mcontext.gregs[29]);
package/qt5/qt5jsbackend/qt5jsbackend.mk new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#44 lore raw

PATCH 30/34 qt5/qt5declarative: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in                        |    1 +
 package/qt5/qt5declarative/Config.in         |   18 ++++++++++
 package/qt5/qt5declarative/qt5declarative.mk |   48 ++++++++++++++++++++++++++
 3 files changed, 67 insertions(+)
 create mode 100644 package/qt5/qt5declarative/Config.in
 create mode 100644 package/qt5/qt5declarative/qt5declarative.mk
package/qt5/Config.in +1 -0
index 8a4ed53..ff98b9e 100644
@@ -15,6 +15,7 @@ menuconfig BR2_PACKAGE_QT5
 
 if BR2_PACKAGE_QT5
 source "package/qt5/qt5base/Config.in"
+source "package/qt5/qt5declarative/Config.in"
 source "package/qt5/qt5imageformats/Config.in"
 source "package/qt5/qt5jsbackend/Config.in"
 source "package/qt5/qt5script/Config.in"
package/qt5/qt5declarative/Config.in new file +18 -0
new file mode 100644
index 0000000..f862b94
@@ -0,0 +1,18 @@
+config BR2_PACKAGE_QT5DECLARATIVE
+	bool "qt5declarative"
+	select BR2_PACKAGE_QT5XMLPATTERNS
+	select BR2_PACKAGE_QT5JSBACKEND
+	select BR2_PACKAGE_QT5BASE
+	select BR2_PACKAGE_QT5BASE_EGLFS
+	depends on BR2_PACKAGE_HAS_OPENGL_EGL
+	depends on BR2_PACKAGE_HAS_OPENGL_ES
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5declarative module.
+
+	  http://qt-project.org
+
+comment "qt5declarative requires an OpenGL-capable backend"
+	depends on !BR2_PACKAGE_HAS_OPENGL_EGL || !BR2_PACKAGE_HAS_OPENGL_ES
package/qt5/qt5declarative/qt5declarative.mk new file +48 -0

48 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#45 lore raw

PATCH 31/34 qt5/qt5graphicaleffects: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in                              |    1 +
 package/qt5/qt5graphicaleffects/Config.in          |   11 ++++++
 .../qt5/qt5graphicaleffects/qt5graphicaleffects.mk |   40 ++++++++++++++++++++
 3 files changed, 52 insertions(+)
 create mode 100644 package/qt5/qt5graphicaleffects/Config.in
 create mode 100644 package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk
package/qt5/Config.in +1 -0
index ff98b9e..59234dd 100644
@@ -16,6 +16,7 @@ menuconfig BR2_PACKAGE_QT5
 if BR2_PACKAGE_QT5
 source "package/qt5/qt5base/Config.in"
 source "package/qt5/qt5declarative/Config.in"
+source "package/qt5/qt5graphicaleffects/Config.in"
 source "package/qt5/qt5imageformats/Config.in"
 source "package/qt5/qt5jsbackend/Config.in"
 source "package/qt5/qt5script/Config.in"
package/qt5/qt5graphicaleffects/Config.in new file +11 -0
new file mode 100644
index 0000000..79ca432
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_QT5GRAPHICALEFFECTS
+	bool "qt5graphicaleffects"
+	select BR2_PACKAGE_QT5BASE
+	select BR2_PACKAGE_QT5DECLARATIVE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5graphicaleffects module.
+
+	  http://qt-project.org
package/qt5/qt5graphicaleffects/qt5graphicaleffects.mk new file +40 -0
new file mode 100644
index 0000000..c4b7231
@@ -0,0 +1,40 @@
+#############################################################
+#
+# qt5graphicaleffects
+#
+#############################################################
+
+QT5GRAPHICALEFFECTS_VERSION = $(QT5_VERSION)
+QT5GRAPHICALEFFECTS_SITE = http://releases.qt-project.org/qt5/$(QT5GRAPHICALEFFECTS_VERSION)/submodules_tar/
+QT5GRAPHICALEFFECTS_SOURCE = qtgraphicaleffects-opensource-src-$(QT5GRAPHICALEFFECTS_VERSION).tar.xz
+QT5GRAPHICALEFFECTS_DEPENDENCIES = qt5base qt5declarative
+QT5GRAPHICALEFFECTS_INSTALL_STAGING = YES
+
+ifeq ($(BR2_PACKAGE_QT5BASE_LICENSE_APPROVED),y)
+QT5GRAPHICALEFFECTS_CONFIGURE_OPTS += -opensource -confirm-license
+QT5GRAPHICALEFFECTS_LICENSE = LGPLv2.1 or GPLv3.0
+# Here we would like to get license files from qt5base, but qt5base
+# may not be extracted at the time we get the legal-info for
+# qt5script.
+else
+QT5GRAPHICALEFFECTS_LICENSE = Commercial license
+QT5GRAPHICALEFFECTS_REDISTRIBUTE = NO
+endif
+
+define QT5GRAPHICALEFFECTS_CONFIGURE_CMDS
+	(cd $(@D); $(HOST_DIR)/usr/bin/qmake)
+endef
+
+define QT5GRAPHICALEFFECTS_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D)
+endef
+
+define QT5GRAPHICALEFFECTS_INSTALL_STAGING_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) install
+endef
+
+define QT5GRAPHICALEFFECTS_INSTALL_TARGET_CMDS
+	cp -dpfr $(STAGING_DIR)/usr/qml/QtGraphicalEffects $(TARGET_DIR)/usr/qml
+endef
+
+$(eval $(generic-package))
Signature · 1 line
1.7.9.5
#46 lore raw

PATCH 32/34 qt5/qt5multimedia: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in                      |    1 +
 package/qt5/qt5multimedia/Config.in        |   11 +++++++
 package/qt5/qt5multimedia/qt5multimedia.mk |   43 ++++++++++++++++++++++++++++
 3 files changed, 55 insertions(+)
 create mode 100644 package/qt5/qt5multimedia/Config.in
 create mode 100644 package/qt5/qt5multimedia/qt5multimedia.mk
package/qt5/Config.in +1 -0
index 59234dd..e8e581c 100644
@@ -19,6 +19,7 @@ source "package/qt5/qt5declarative/Config.in"
 source "package/qt5/qt5graphicaleffects/Config.in"
 source "package/qt5/qt5imageformats/Config.in"
 source "package/qt5/qt5jsbackend/Config.in"
+source "package/qt5/qt5multimedia/Config.in"
 source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
 source "package/qt5/qt5xmlpatterns/Config.in"
package/qt5/qt5multimedia/Config.in new file +11 -0
new file mode 100644
index 0000000..8024798
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_QT5MULTIMEDIA
+	bool "qt5multimedia"
+	select BR2_PACKAGE_QT5BASE
+	select BR2_PACKAGE_QT5DECLARATIVE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5multimedia module.
+
+	  http://qt-project.org
package/qt5/qt5multimedia/qt5multimedia.mk new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#47 lore raw

PATCH 33/34 qt5/qt5quick1: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in              |    1 +
 package/qt5/qt5quick1/Config.in    |   15 ++++++++++++
 package/qt5/qt5quick1/qt5quick1.mk |   45 ++++++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+)
 create mode 100644 package/qt5/qt5quick1/Config.in
 create mode 100644 package/qt5/qt5quick1/qt5quick1.mk
package/qt5/Config.in +1 -0
index e8e581c..0db6c45 100644
@@ -20,6 +20,7 @@ source "package/qt5/qt5graphicaleffects/Config.in"
 source "package/qt5/qt5imageformats/Config.in"
 source "package/qt5/qt5jsbackend/Config.in"
 source "package/qt5/qt5multimedia/Config.in"
+source "package/qt5/qt5quick1/Config.in"
 source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
 source "package/qt5/qt5xmlpatterns/Config.in"
package/qt5/qt5quick1/Config.in new file +15 -0
new file mode 100644
index 0000000..157038c
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_QT5QUICK1
+	bool "qt5quick1"
+	select BR2_PACKAGE_QT5BASE
+	select BR2_PACKAGE_QT5SCRIPT
+	select BR2_PACKAGE_QT5XMLPATTERNS
+	select BR2_PACKAGE_QT5DECLARATIVE
+	select BR2_PACKAGE_QT5JSBACKEND
+	select BR2_PACKAGE_QT5WEBKIT
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5quick1 module.
+
+	  http://qt-project.org
package/qt5/qt5quick1/qt5quick1.mk new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#48 lore raw

PATCH 34/34 qt5/qt5webkit: new package

In reply to Thomas Petazzoni
---
 package/qt5/Config.in              |    1 +
 package/qt5/qt5webkit/Config.in    |   12 ++++++++++
 package/qt5/qt5webkit/qt5webkit.mk |   43 ++++++++++++++++++++++++++++++++++++
 3 files changed, 56 insertions(+)
 create mode 100644 package/qt5/qt5webkit/Config.in
 create mode 100644 package/qt5/qt5webkit/qt5webkit.mk
package/qt5/Config.in +1 -0
index 0db6c45..5662f55 100644
@@ -23,5 +23,6 @@ source "package/qt5/qt5multimedia/Config.in"
 source "package/qt5/qt5quick1/Config.in"
 source "package/qt5/qt5script/Config.in"
 source "package/qt5/qt5svg/Config.in"
+source "package/qt5/qt5webkit/Config.in"
 source "package/qt5/qt5xmlpatterns/Config.in"
 endif
package/qt5/qt5webkit/Config.in new file +12 -0
new file mode 100644
index 0000000..17ee3ab
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_QT5WEBKIT
+	bool "qt5webkit"
+	select BR2_PACKAGE_QT5BASE
+	select BR2_PACKAGE_QT5BASE_ICU
+	select BR2_PACKAGE_SQLITE
+	help
+	  Qt is a cross-platform application and UI framework for
+	  developers using C++.
+
+	  This package corresponds to the qt5webkit module.
+
+	  http://qt-project.org
package/qt5/qt5webkit/qt5webkit.mk new file +43 -0

43 lines not on this page · raw message

Signature · 1 line
1.7.9.5