board/ti: k3 boards: Stop using findfdt
cover board/ti: k3 boards: Stop using findfdt
This is a wide cleanup to switch to setting fdtfile using env_set instead of scripted magic. 'fdtfile' is expected to be set by default. This allows the stdboot triggered efi loaders to find the correct OS device tree file.
This is a refresh of
https://lore.kernel.org/all/[email protected]/ which was the wrong approach.
Bootlogs: https://gist.github.com/nmenon/2f4a142c1bcaa09d544b1f2e206ea134
NOTE: There are a couple of checkpatch WARN (around LATE_INIT) and CHECK (fdt_ops #ifdeffery) that on closer inspection looks fine and consistent with other similar usage.
Based on next branch at: c2c598e87cfe Merge branch 'staging' of https://source.denx.de/u-boot/custodians/u-boot-tegra into next
Nishanth Menon (10):
board: ti: common: Introduce a common fdt ops library
board: ti: am62ax: Set fdtfile from C code instead of findfdt script
board: ti: am62x: Set fdtfile from C code instead of findfdt script
board: ti: am64x: Set fdtfile from C code instead of findfdt script
board: ti: am65x: Set fdtfile from C code instead of findfdt script
board: ti: j721e: Set fdtfile from C code instead of findfdt script
board: ti: j721s2: Set fdtfile from C code instead of findfdt script
board: beagle: beagleboneai64: Set fdtfile from C code instead of
findfdt script
board: beagle: beagleplay: Set fdtfile from C code instead of findfdt
script
include: env: ti: Drop default_findfdt
board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++ .../beagle/beagleboneai64/beagleboneai64.env | 1 - board/beagle/beagleplay/beagleplay.c | 14 ++++ board/beagle/beagleplay/beagleplay.env | 1 - board/ti/am62ax/am62ax.env | 1 - board/ti/am62ax/evm.c | 10 +++ board/ti/am62x/am62x.env | 1 - board/ti/am62x/evm.c | 8 +++ board/ti/am64x/am64x.env | 9 --- board/ti/am64x/evm.c | 8 +++ board/ti/am65x/am65x.env | 3 - board/ti/am65x/evm.c | 2 + board/ti/common/Kconfig | 12 ++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 65 +++++++++++++++++++ board/ti/common/fdt_ops.h | 41 ++++++++++++ board/ti/j721e/evm.c | 8 +++ board/ti/j721e/j721e.env | 10 --- board/ti/j721s2/evm.c | 8 +++ board/ti/j721s2/j721s2.env | 8 --- configs/am62ax_evm_a53_defconfig | 1 + configs/am62x_beagleplay_a53_defconfig | 3 +- configs/am62x_evm_a53_defconfig | 1 + configs/j721e_beagleboneai64_a72_defconfig | 3 +- include/env/ti/default_findfdt.env | 12 ---- 25 files changed, 197 insertions(+), 48 deletions(-) create mode 100644 board/ti/common/fdt_ops.c create mode 100644 board/ti/common/fdt_ops.h delete mode 100644 include/env/ti/default_findfdt.env
Signature · 1 line
2.43.0
PATCH 1/10 board: ti: common: Introduce a common fdt ops library
Introduce a common fdt operations library for basic device tree operations that are common between various boards.
The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery.
--- board/ti/common/Kconfig | 12 ++++++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 65 +++++++++++++++++++++++++++++++++++++++ board/ti/common/fdt_ops.h | 41 ++++++++++++++++++++++++ 4 files changed, 119 insertions(+) create mode 100644 board/ti/common/fdt_ops.c create mode 100644 board/ti/common/fdt_ops.h
board/ti/common/Kconfig +12 -0
@@ -49,3 +49,15 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB + +config TI_EVM_FDT_FOLDER_PATH + string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 + help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.
board/ti/common/Makefile +1 -0
@@ -3,3 +3,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o +obj-${CONFIG_OF_LIBFDT} += fdt_ops.o
board/ti/common/fdt_ops.c new file +65 -0
65 lines not on this page · raw message
board/ti/common/fdt_ops.h new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH 01/10] board: ti: common: Introduce a common fdt ops library
Quoted 103 lines · Nishanth Menon
Introduce a common fdt operations library for basic device tree operations that are common between various boards.
The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/common/Kconfig | 12 ++++++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 65 +++++++++++++++++++++++++++++++++++++++ board/ti/common/fdt_ops.h | 41 ++++++++++++++++++++++++ 4 files changed, 119 insertions(+)create mode 100644
board/ti/common/fdt_ops.c
create mode 100644board/ti/common/fdt_ops.hboard/ti/common/Kconfig +12
-0@@ -49,3 +49,15 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB + +config TI_EVM_FDT_FOLDER_PATH + string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 + help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.board/ti/common/Makefile +1
-0@@ -3,3 +3,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o +obj-${CONFIG_OF_LIBFDT} += fdt_ops.oboard/ti/common/fdt_ops.c new file +51
-0@@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Library to support FDT file operations which are common +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ +*/ + +#include <env.h> +#include <vsprintf.h> +#include "fdt_ops.h" + +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map) +{ +char *fdt_file_name =NULL ; +char fdtfile[TI_FDT_FILE_MAX ]; + +if (name_fdt) { +while (fdt_map) { +/* Check for NULL terminator in the list */ +if (!fdt_map->name_fdt) +break ; +if (!strncmp (fdt_map->name_fdt, name_fdt,TI_NAME_FDT_MAX )) { + fdt_file_name = fdt_map->fdt_file_name; +break ; + } + fdt_map++; + } + } + +/* match not found OR null name_fdt */ +if (!fdt_file_name) { +/* +* Prioritize CONFIG_DEFAULT_FDT_FILE - if that is not defined, +* or is empty, then use CONFIG_DEFAULT_DEVICE_TREE +*/ +#ifdef CONFIG_DEFAULT_FDT_FILE +if (strlen (CONFIG_DEFAULT_FDT_FILE )) { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_FDT_FILE ); + } else +#endif + { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH , +CONFIG_DEFAULT_DEVICE_TREE ); + } + }else { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" ,CONFIG_TI_EVM_FDT_FOLDER_PATH , + fdt_file_name); + } +
board/ti/common/fdt_ops.c line 61
Quoted 10 lines
board/ti/common/fdt_ops.c new file +10
-0+env_set ("fdtfile" , fdtfile); + +/* +* XXX: DEPRECATION WARNING: 2 u-boot versions. +* +* Maintain compatibility with downstream scripts that may be using +* name_fdt +*/ +if (name_fdt) +env_set ("name_fdt" , name_fdt);
"name_fdt" should match "fdtfile", you should have just:
env_set("name_fdt", fdtfile);
are you mixing this up with "board_name"?
Andrew
Quoted 51 lines
board/ti/common/fdt_ops.c new file +4
-0+/* Also set the findfdt legacy script to warn users to stop using this */ +env_set ("findfdt" , +"echo WARN: fdtfile already set. Stop using findfdt in script" ); +}board/ti/common/fdt_ops.h new file +41
-0@@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* Library to support common device tree manipulation for TI EVMs +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com +*/ + +#ifndef __FDT_OPS_H +#define __FDT_OPS_H + +#define TI_NAME_FDT_MAX 20 +#define TI_FDT_FILE_MAX 200 + +/** +* struct ti_fdt_map - mapping of device tree blob name to board name +* @name_fdt: board_name up to TI_NAME_FDT_MAX long +* @fdt_file_name: device tree blob name as described by kernel +*/ +struct ti_fdt_map { +const char *name_fdt; +char *fdt_file_name; +}; + +/** +* ti_set_fdt_env - Find the correct device tree file name and set 'fdtfile' +* env variable with correct folder structure appropriate to the architecture +* and kernel conventions. This function is invoked typically as part of +* board_late_init +* +* fdt name is picked by: +* a) If a match is found, use the match +* b) If not, CONFIG_DEFAULT_FDT_FILE (Boot OS device tree) if that is defined +* and not null +* c) If not, Use CONFIG_DEFAULT_DEVICE_TREE (DT control for bootloader) +* +* @name_fdt: match to search with (max of TI_NAME_FDT_MAX chars) +* @fdt_map: NULL terminated array of device tree file name matches. +*/ +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map); + +#endif /* __FDT_OPS_H */
Re: [PATCH 01/10] board: ti: common: Introduce a common fdt ops library
Quoted 116 lines · Andrew Davis
Quoted 102 lines · Nishanth Menon
Introduce a common fdt operations library for basic device tree operations that are common between various boards.
The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/common/Kconfig | 12 ++++++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 65 +++++++++++++++++++++++++++++++++++++++ board/ti/common/fdt_ops.h | 41 ++++++++++++++++++++++++ 4 files changed, 119 insertions(+)create mode 100644
board/ti/common/fdt_ops.c
create mode 100644board/ti/common/fdt_ops.hboard/ti/common/Kconfig +12
-0@@ -49,3 +49,15 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB + +config TI_EVM_FDT_FOLDER_PATH + string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 + help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.board/ti/common/Makefile +1
-0@@ -3,3 +3,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o +obj-${CONFIG_OF_LIBFDT} += fdt_ops.oboard/ti/common/fdt_ops.c new file +51
-0@@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Library to support FDT file operations which are common +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ +*/ + +#include <env.h> +#include <vsprintf.h> +#include "fdt_ops.h" + +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map) +{ +char *fdt_file_name =NULL ; +char fdtfile[TI_FDT_FILE_MAX ]; + +if (name_fdt) { +while (fdt_map) { +/* Check for NULL terminator in the list */ +if (!fdt_map->name_fdt) +break ; +if (!strncmp (fdt_map->name_fdt, name_fdt,TI_NAME_FDT_MAX )) { + fdt_file_name = fdt_map->fdt_file_name; +break ; + } + fdt_map++; + } + } + +/* match not found OR null name_fdt */ +if (!fdt_file_name) { +/* +* Prioritize CONFIG_DEFAULT_FDT_FILE - if that is not defined, +* or is empty, then use CONFIG_DEFAULT_DEVICE_TREE +*/ +#ifdef CONFIG_DEFAULT_FDT_FILE +if (strlen (CONFIG_DEFAULT_FDT_FILE )) { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_FDT_FILE ); + } else +#endif + { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH , +CONFIG_DEFAULT_DEVICE_TREE ); + } + }else { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" ,CONFIG_TI_EVM_FDT_FOLDER_PATH , + fdt_file_name); + } +board/ti/common/fdt_ops.c line 61
Quoted 10 lines
board/ti/common/fdt_ops.c new file +10
-0+env_set ("fdtfile" , fdtfile); + +/* +* XXX: DEPRECATION WARNING: 2 u-boot versions. +* +* Maintain compatibility with downstream scripts that may be using +* name_fdt +*/ +if (name_fdt) +env_set ("name_fdt" , name_fdt);"
name_fdt" should match "fdtfile", you should have just:
Quoted 3 lines
env_set("name_fdt", fdtfile);are you mixing this up with "
board_name"?
It should have been fdtfile. Thanks for catching it.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 01/10] board: ti: common: Introduce a common fdt ops library
In reply to Nishanth MenonQuoted 27 lines · Nishanth Menon
Introduce a common fdt operations library for basic device tree operations that are common between various boards.
The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/common/Kconfig | 12 ++++++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 65 +++++++++++++++++++++++++++++++++++++++ board/ti/common/fdt_ops.h | 41 ++++++++++++++++++++++++ 4 files changed, 119 insertions(+) create mode 100644 board/ti/common/fdt_ops.c create mode 100644 board/ti/common/fdt_ops.hboard/ti/common/Kconfig +2
-0@@ -49,3 +49,15 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB + +config TI_EVM_FDT_FOLDER_PATH
board/ti/common/Kconfig config TI_COMMON_CMD_OPTIONS · line 63
Quoted 10 lines
board/ti/common/Kconfig +10
-0+ string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 + help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.
It's not clear to me why we need the flexibility of specifying a FDT filename per board independently of the FDT folder path. Why can't the path be part of the fdt_map?
Quoted 17 lines
board/ti/common/Makefile +1
-0@@ -3,3 +3,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o +obj-${CONFIG_OF_LIBFDT} += fdt_ops.oboard/ti/common/fdt_ops.c new file +2
-0@@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/*
board/ti/common/fdt_ops.c line 12
Quoted 10 lines
board/ti/common/fdt_ops.c new file +10
-0+* Library to support FDT file operations which are common +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ +*/ + +#include <env.h> +#include <vsprintf.h> +#include "fdt_ops.h" + +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map)
This function takes a board name and sets the FDT name, so why isn't the first parameter called 'board_name' or similar?
board/ti/common/fdt_ops.c line 22
Quoted 10 lines
board/ti/common/fdt_ops.c new file +10
-0+{ +char *fdt_file_name =NULL ; +char fdtfile[TI_FDT_FILE_MAX ]; + +if (name_fdt) { +while (fdt_map) { +/* Check for NULL terminator in the list */ +if (!fdt_map->name_fdt) +break ; +if (!strncmp (fdt_map->name_fdt, name_fdt,TI_NAME_FDT_MAX )) {
Why do we need a max length? Shouldn't strcmp() be fine given the name_fdt member of the fdt_map is set in code (ie, not read in)?
Quoted 7 lines
board/ti/common/fdt_ops.c new file +7
-0+ fdt_file_name = fdt_map->fdt_file_name; +break ; + } + fdt_map++; + } + } +
board/ti/common/fdt_ops.c line 39
Quoted 10 lines
board/ti/common/fdt_ops.c new file +10
-0+/* match not found OR null name_fdt */ +if (!fdt_file_name) { +/* +* Prioritize CONFIG_DEFAULT_FDT_FILE - if that is not defined, +* or is empty, then use CONFIG_DEFAULT_DEVICE_TREE +*/ +#ifdef CONFIG_DEFAULT_FDT_FILE +if (strlen (CONFIG_DEFAULT_FDT_FILE )) { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_FDT_FILE );
I do not see where any TI platforms set CONFIG_DEFAULT_FDT_FILE, so why have logic that checks for it? We don't use it. With this patch (fdt_map) I don't see why we would start needing it in the future.
board/ti/common/fdt_ops.c line 45
Quoted 6 lines
board/ti/common/fdt_ops.c new file +6
-0+ } else +#endif + { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH , +CONFIG_DEFAULT_DEVICE_TREE );
If fdtfile isn't set, EFI bootmeth falls back to the control DT anyway, so this is unnecessary duplication of logic.
Quoted 27 lines
board/ti/common/fdt_ops.c new file +20
-0+ } + }else { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" ,CONFIG_TI_EVM_FDT_FOLDER_PATH , + fdt_file_name); + } + +env_set ("fdtfile" , fdtfile); + +/* +* XXX: DEPRECATION WARNING: 2 u-boot versions. +* +* Maintain compatibility with downstream scripts that may be using +* name_fdt +*/ +if (name_fdt) +env_set ("name_fdt" , name_fdt); +/* Also set the findfdt legacy script to warn users to stop using this */ +env_set ("findfdt" , +"echo WARN: fdtfile already set. Stop using findfdt in script" ); +}board/ti/common/fdt_ops.h new file +1
-0@@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */
board/ti/common/fdt_ops.h line 11
Quoted 10 lines
board/ti/common/fdt_ops.h new file +10
-0+/* +* Library to support common device tree manipulation for TI EVMs +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com +*/ + +#ifndef __FDT_OPS_H +#define __FDT_OPS_H + +#define TI_NAME_FDT_MAX 20
TI_BOARD_NAME_MAX??
board/ti/common/fdt_ops.h line 16
Quoted 5 lines
board/ti/common/fdt_ops.h new file +5
-0+#define TI_FDT_FILE_MAX 200 + +/** +* struct ti_fdt_map - mapping of device tree blob name to board name +* @name_fdt: board_name up to TI_NAME_FDT_MAX long
If this is the board_name, why call it name_fdt? Why not board_name?
board/ti/common/fdt_ops.h
Quoted 10 lines
board/ti/common/fdt_ops.h new file +9
-0+* @fdt_file_name: device tree blob name as described by kernel +*/ +struct ti_fdt_map { +const char *name_fdt; +char *fdt_file_name; +}; + +/** +* ti_set_fdt_env - Find the correct device tree file name and set 'fdtfile'
"Find the correct device tree file name based on the board name and "...
Quoted 6 lines
+ * env variable with correct folder structure appropriate to the architecture
+ * and kernel conventions. This function is invoked typically as part of
+ *board_late_init
+ *
+ * fdt name is picked by:
+ * a) If a match is found, use the match
"a) If a board name match is found, use the match"
Quoted 12 lines
+ * b) If not,
CONFIG_DEFAULT_FDT_FILE(Boot OS device tree) if that is defined
+ * and not null
+ * c) If not, UseCONFIG_DEFAULT_DEVICE_TREE(DT control for bootloader)
+ *
+ * @name_fdt: match to search with (max ofTI_NAME_FDT_MAXchars)
+ * @fdt_map: NULL terminated array of device tree file name matches.
+ */board/ti/common/fdt_ops.h new file +3
-0+void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map); + +#endif /* __FDT_OPS_H */ Signature · 1 line
2.43.0
Re: [PATCH 01/10] board: ti: common: Introduce a common fdt ops library
On 20:20-20240108, Jon Humphreys wrote:
[...]
Quoted 7 lines
Quoted 7 lines
board/ti/common/Kconfig +7
-0+config TI_EVM_FDT_FOLDER_PATH + string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
Quoted 8 lines
board/ti/common/Kconfig config TI_COMMON_CMD_OPTIONS · line 63
Quoted 4 lines
board/ti/common/Kconfig +4
-0+ help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.It's not clear to me why we need the flexibility of specifying a FDT filename per board independently of the FDT folder path. Why can't the path be part of the
fdt_map?
This does not happen too often, but the folder paths are irritating and impact multiple platforms at the same time.
[...]
Quoted 4 lines
Quoted 4 lines
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
Quoted 8 lines
board/ti/common/fdt_ops.c line 12
Quoted 5 lines
board/ti/common/fdt_ops.c new file +5
-0+#include <env.h> +#include <vsprintf.h> +#include "fdt_ops.h" + +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map)This function takes a board name and sets the FDT name, so why isn't the first parameter called '
board_name' or similar?
Fair enough - board_name is more appropriate.
Quoted 14 lines
board/ti/common/fdt_ops.c line 22
Quoted 11 lines
board/ti/common/fdt_ops.c new file +10
-0+{ +char *fdt_file_name =NULL ; +char fdtfile[TI_FDT_FILE_MAX ]; + +if (name_fdt) { +while (fdt_map) { +/* Check for NULL terminator in the list */ +if (!fdt_map->name_fdt) +break ; +if (!strncmp (fdt_map->name_fdt, name_fdt,TI_NAME_FDT_MAX )) {Why do we need a max length? Shouldn't
strcmp()be fine given thename_fdtmember of thefdt_mapis set in code (ie, not read in)?
prefer strncmp to strcmp where possible. it isn't a matter of set in code or not, it is a possibility of making a mistake - hence the constant sized string.
Quoted 14 lines
Quoted 14 lines
board/ti/common/fdt_ops.c new file +13
-0+ fdt_file_name = fdt_map->fdt_file_name; +break ; + } + fdt_map++; + } + } + +/* match not found OR null name_fdt */ +if (!fdt_file_name) { +/* +* Prioritize CONFIG_DEFAULT_FDT_FILE - if that is not defined, +* or is empty, then use CONFIG_DEFAULT_DEVICE_TREE +*/
Quoted 8 lines
board/ti/common/fdt_ops.c line 39
Quoted 4 lines
board/ti/common/fdt_ops.c new file +4
-0+#ifdef CONFIG_DEFAULT_FDT_FILE +if (strlen (CONFIG_DEFAULT_FDT_FILE )) { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_FDT_FILE );I do not see where any TI platforms set
CONFIG_DEFAULT_FDT_FILE, so why have logic that checks for it? We don't use it. With this patch (fdt_map) I don't see why we would start needing it in the future.
You don't need to explicitly set since it is already set by default - check the .config.
Quoted 10 lines
board/ti/common/fdt_ops.c line 45
Quoted 7 lines
board/ti/common/fdt_ops.c new file +6
-0+ } else +#endif + { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH , +CONFIG_DEFAULT_DEVICE_TREE );If fdtfile isn't set, EFI bootmeth falls back to the control DT anyway, so this is unnecessary duplication of logic.
Wrong translation of what is going on here - it is assuming the fdtfile _name_ is the same as the board file used for u-boot not the control DT content(which is the fall back for bootmeth). It is possible that the content is the same as what U-Boot is using, but the file name is what is being selected here.
[...]
Quoted 4 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ +#define TI_NAME_FDT_MAX 20
TI_BOARD_NAME_MAX??
OK - will fix.
Quoted 8 lines
board/ti/common/fdt_ops.h line 16
Quoted 6 lines
board/ti/common/fdt_ops.h new file +5
-0+#define TI_FDT_FILE_MAX 200 + +/** +* struct ti_fdt_map - mapping of device tree blob name to board name +* @name_fdt: board_name up to TI_NAME_FDT_MAX long If this is the
board_name, why call itname_fdt? Why notboard_name?
will replace with board_name
Quoted 13 lines
board/ti/common/fdt_ops.h
Quoted 11 lines
+ * @fdt_file_name: device tree blob name as described by kernel
+ */board/ti/common/fdt_ops.h new file +7
-0+struct ti_fdt_map { +const char *name_fdt; +char *fdt_file_name; +}; + +/** +* ti_set_fdt_env - Find the correct device tree file name and set 'fdtfile' "Find the correct device tree file name based on the board name and "...
OK.
Quoted 9 lines
Quoted 7 lines
+ * env variable with correct folder structure appropriate to the architecture
+ * and kernel conventions. This function is invoked typically as part of
+ *board_late_init
+ *
+ * fdt name is picked by:
+ * a) If a match is found, use the match"a) If a board name match is found, use the match"
OK.
[...]
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 01/10] board: ti: common: Introduce a common fdt ops library
In reply to Nishanth MenonQuoted 133 lines · Nishanth Menon
Introduce a common fdt operations library for basic device tree operations that are common between various boards.
The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/common/Kconfig | 12 ++++++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 65 +++++++++++++++++++++++++++++++++++++++ board/ti/common/fdt_ops.h | 41 ++++++++++++++++++++++++ 4 files changed, 119 insertions(+) create mode 100644 board/ti/common/fdt_ops.c create mode 100644 board/ti/common/fdt_ops.hboard/ti/common/Kconfig +12
-0@@ -49,3 +49,15 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB + +config TI_EVM_FDT_FOLDER_PATH + string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 + help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.board/ti/common/Makefile +1
-0@@ -3,3 +3,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o +obj-${CONFIG_OF_LIBFDT} += fdt_ops.oboard/ti/common/fdt_ops.c new file +65
-0@@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Library to support FDT file operations which are common +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ +*/ + +#include <env.h> +#include <vsprintf.h> +#include "fdt_ops.h" + +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map) +{ +char *fdt_file_name =NULL ; +char fdtfile[TI_FDT_FILE_MAX ]; + +if (name_fdt) { +while (fdt_map) { +/* Check for NULL terminator in the list */ +if (!fdt_map->name_fdt) +break ; +if (!strncmp (fdt_map->name_fdt, name_fdt,TI_NAME_FDT_MAX )) { + fdt_file_name = fdt_map->fdt_file_name; +break ; + } + fdt_map++; + } + } + +/* match not found OR null name_fdt */ +if (!fdt_file_name) { +/* +* Prioritize CONFIG_DEFAULT_FDT_FILE - if that is not defined, +* or is empty, then use CONFIG_DEFAULT_DEVICE_TREE +*/ +#ifdef CONFIG_DEFAULT_FDT_FILE +if (strlen (CONFIG_DEFAULT_FDT_FILE )) { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_FDT_FILE ); + } else +#endif + { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH , +CONFIG_DEFAULT_DEVICE_TREE ); + } + }else { +snprintf (fdtfile,sizeof (fdtfile),"%s/%s" ,CONFIG_TI_EVM_FDT_FOLDER_PATH , + fdt_file_name); + } + +env_set ("fdtfile" , fdtfile); + +/* +* XXX: DEPRECATION WARNING: 2 u-boot versions. +* +* Maintain compatibility with downstream scripts that may be using +* name_fdt +*/ +if (name_fdt) +env_set ("name_fdt" , name_fdt); +/* Also set the findfdt legacy script to warn users to stop using this */ +env_set ("findfdt" , +"echo WARN: fdtfile already set. Stop using findfdt in script" ); +}board/ti/common/fdt_ops.h new file +10
-0@@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* Library to support common device tree manipulation for TI EVMs +* +* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com +*/ + +#ifndef __FDT_OPS_H +#define __FDT_OPS_H +
board/ti/common/fdt_ops.h line 20
Quoted 10 lines
board/ti/common/fdt_ops.h new file +10
-0+#define TI_NAME_FDT_MAX 20 +#define TI_FDT_FILE_MAX 200 + +/** +* struct ti_fdt_map - mapping of device tree blob name to board name +* @name_fdt: board_name up to TI_NAME_FDT_MAX long +* @fdt_file_name: device tree blob name as described by kernel +*/ +struct ti_fdt_map { +const char *name_fdt;
Can we call this board_name? as name_fdt corresponds to device tree name.
Quoted 21 lines
board/ti/common/fdt_ops.h new file +21
-0+ char *fdt_file_name; +}; + +/** +* ti_set_fdt_env - Find the correct device tree file name and set 'fdtfile' +* env variable with correct folder structure appropriate to the architecture +* and kernel conventions. This function is invoked typically as part of +* board_late_init +* +* fdt name is picked by: +* a) If a match is found, use the match +* b) If not, CONFIG_DEFAULT_FDT_FILE (Boot OS device tree) if that is defined +* and not null +* c) If not, Use CONFIG_DEFAULT_DEVICE_TREE (DT control for bootloader) +* +* @name_fdt: match to search with (max of TI_NAME_FDT_MAX chars) +* @fdt_map: NULL terminated array of device tree file name matches. +*/ +void ti_set_fdt_env (const char *name_fdt,struct ti_fdt_map *fdt_map); + +#endif /* __FDT_OPS_H */
Signature · 2 lines
cheers, -roger
Re: [PATCH 01/10] board: ti: common: Introduce a common fdt ops library
On 15:08-20240109, Roger Quadros wrote:
[..]
Quoted 10 lines
board/ti/common/fdt_ops.h line 20
Quoted 7 lines
board/ti/common/fdt_ops.h new file +7
-0+/** +* struct ti_fdt_map - mapping of device tree blob name to board name +* @name_fdt: board_name up to TI_NAME_FDT_MAX long +* @fdt_file_name: device tree blob name as described by kernel +*/ +struct ti_fdt_map { +const char *name_fdt;Can we call this
board_name? asname_fdtcorresponds to device tree name.
Done.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
PATCH 2/10 board: ti: am62ax: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
--- board/ti/am62ax/am62ax.env | 1 - board/ti/am62ax/evm.c | 10 ++++++++++ configs/am62ax_evm_a53_defconfig | 1 + 3 files changed, 11 insertions(+), 1 deletion(-)
board/ti/am62ax/am62ax.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
board/ti/am62ax/evm.c +10 -0
@@ -13,6 +13,8 @@#include <fdt_support.h> #include <spl.h> +#include "../common/fdt_ops.h" +int board_init (void ) {return 0 ;
@@ -27,3 +29,11 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +ti_set_fdt_env (NULL ,NULL ); +return 0 ; +} +#endif
configs/am62ax_evm_a53_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_BOOTSTD_FULL=y CONFIG_BOOTSTD_DEFAULTS=y CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_PAD_TO=0x0 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
Signature · 1 line
2.43.0
Re: [PATCH 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script
Quoted 37 lines · Nishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/am62ax/am62ax.env | 1 - board/ti/am62ax/evm.c | 10 ++++++++++ configs/am62ax_evm_a53_defconfig | 1 + 3 files changed, 11 insertions(+), 1 deletion(-)board/ti/am62ax/am62ax.env +0
-1@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Imageboard/ti/am62ax/evm.c +2
-0@@ -13,6 +13,8 @@#include <fdt_support.h> #include <spl.h> +#include "../common/fdt_ops.h" +int board_init (void ) {return 0 ;
board/ti/am62ax/evm.c int dram_init_banksize(void) · line 36
Quoted 8 lines
board/ti/am62ax/evm.c +5
-0@@ -27,3 +29,11 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +ti_set_fdt_env (NULL ,NULL );
If a board only has one FDT possible, why not just hard code the path here, rather than use the set_fdt_env() logic with NULLs and create/set TI_EVM_FDT_FOLDER_PATH config that is only used here anyway?
If you think we might add additional board types / FDTs later, then instead let's formalize the fdt_map concept and create a CONFIG_USES_FDT_MAP that will then rely on the fdt_map and call the ti_set_fdt_env(), and if not set, then it just returns a hard coded value, which could be based on the CONFIG_DEFAULT_DEVICE_TREE config.
Quoted 17 lines
board/ti/am62ax/evm.c +3
-0+ return 0; +} +#endif configs/am62ax_evm_a53_defconfig +1
-0@@ -24,6 +24,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_BOOTSTD_FULL=y CONFIG_BOOTSTD_DEFAULTS=y CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_PAD_TO=0x0 CONFIG_SPL_HAS_BSS_LINKER_SECTION=ySignature · 1 line
2.43.0
Re: [PATCH 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script
On 20:48-20240108, Jon Humphreys wrote:
[..]
Quoted 9 lines
board/ti/am62ax/evm.c int dram_init_banksize(void) · line 36
Quoted 5 lines
board/ti/am62ax/evm.c +5
-0+ +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +ti_set_fdt_env (NULL ,NULL );If a board only has one FDT possible, why not just hard code the path here, rather than use the
set_fdt_env()logic with NULLs and create/setTI_EVM_FDT_FOLDER_PATHconfig that is only used here anyway?
Centralizing the logic has the additional benefit of standardizing fall back when maps are not matched. It is better than having each of the board file introduce random way of doing things.
Quoted 6 lines
If you think we might add additional board types / FDTs later, then instead let's formalize the
fdt_mapconcept and create aCONFIG_USES_FDT_MAPthat will then rely on thefdt_mapand call theti_set_fdt_env(), and if not set, then it just returns a hard coded value, which could be based on theCONFIG_DEFAULT_DEVICE_TREEconfig.
Ends up being superflous - there is already a push to reduce the config options.
[..]
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
PATCH 3/10 board: ti: am62x: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
--- board/ti/am62x/am62x.env | 1 - board/ti/am62x/evm.c | 8 ++++++++ configs/am62x_evm_a53_defconfig | 1 + 3 files changed, 9 insertions(+), 1 deletion(-)
board/ti/am62x/am62x.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
board/ti/am62x/evm.c +8 -0
@@ -54,6 +54,14 @@ int dram_init(void)return fdtdec_setup_mem_size_base (); } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +ti_set_fdt_env (NULL ,NULL ); +return 0 ; +} +#endif +int dram_init_banksize (void ) {return fdtdec_setup_memory_banksize ();
configs/am62x_evm_a53_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_BOOTSTD_FULL=y CONFIG_BOOTSTD_DEFAULTS=y CONFIG_SYS_BOOTM_LEN=0x800000 CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80c80000
Signature · 1 line
2.43.0
PATCH 4/10 board: ti: am64x: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
--- board/ti/am64x/am64x.env | 9 --------- board/ti/am64x/evm.c | 8 ++++++++ 2 files changed, 8 insertions(+), 9 deletions(-)
board/ti/am64x/am64x.env +0 -9
@@ -2,14 +2,6 @@ #include <env/ti/mmc.env> #include <env/ti/k3_dfu.env> -findfdt= - if test $board_name = am64x_gpevm; then - setenv name_fdt ti/k3-am642-evm.dtb; fi; - if test $board_name = am64x_skevm; then - setenv name_fdt ti/k3-am642-sk.dtb; fi; - if test $name_fdt = undefined; then - echo WARNING: Could not determine device tree to use; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
@@ -43,7 +35,6 @@ get_fit_usb=load usb ${bootpart} ${addr_fit} usbboot=setenv boot usb; setenv bootpart 0:2; usb start; - run findfdt; run init_usb; run get_kern_usb; run get_fdt_usb;
board/ti/am64x/evm.c +8 -0
@@ -16,6 +16,7 @@#include <env.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_am64x_gpevm () (board_ti_k3_is("AM64-GPEVM") || \ board_ti_k3_is("AM64-HSEVM"))
@@ -180,6 +181,12 @@ int checkboard(void) }#ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_am64_evm_fdt_map[] = { + {"am64x_gpevm" ,"k3-am642-evm.dtb" }, + {"am64x_skevm" ,"k3-am642-sk.dtb" }, + {/* Sentinel. */ } +}; +static void setup_board_eeprom_env (void ) {char *name ="am64x_gpevm" ;
@@ -197,6 +204,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_am64_evm_fdt_map); }static void setup_serial (void )
Signature · 1 line
2.43.0
Re: [PATCH 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script
Quoted 52 lines · Nishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/am64x/am64x.env | 9 --------- board/ti/am64x/evm.c | 8 ++++++++ 2 files changed, 8 insertions(+), 9 deletions(-)board/ti/am64x/am64x.env +0
-9@@ -2,14 +2,6 @@ #include <env/ti/mmc.env> #include <env/ti/k3_dfu.env> -findfdt= - if test $board_name = am64x_gpevm; then - setenv name_fdt ti/k3-am642-evm.dtb; fi; - if test $board_name = am64x_skevm; then - setenv name_fdt ti/k3-am642-sk.dtb; fi; - if test $name_fdt = undefined; then - echo WARNING: Could not determine device tree to use; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}@@ -43,7 +35,6 @@ get_fit_usb=load usb ${bootpart} ${addr_fit} usbboot=setenv boot usb; setenv bootpart 0:2; usb start; - run findfdt; run init_usb; run get_kern_usb; run get_fdt_usb;board/ti/am64x/evm.c +1
-0@@ -16,6 +16,7 @@#include <env.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_am64x_gpevm () (board_ti_k3_is("AM64-GPEVM") || \ board_ti_k3_is("AM64-HSEVM"))
board/ti/am64x/evm.c int checkboard(void) · line 186
Quoted 6 lines
board/ti/am64x/evm.c +3
-0@@ -180,6 +181,12 @@ int checkboard(void) }#ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_am64_evm_fdt_map[] = { + {"am64x_gpevm" ,"k3-am642-evm.dtb" }, + {"am64x_skevm", "k3-am642-sk.dtb"},
"am64x_gpevm" and "am64x_skevm" strings are used multiple times in this file. see setup_board_eeprom_env()
Please use a MACRO for them.
What is the logic of choosing this name and can it be updated at this point? e.g."gp" is misleading in the board name as the boards are now shipped with HS-FS chip and are no longer GP.
Quoted 14 lines
board/ti/am64x/evm.c +4
-0+ {/* Sentinel. */ } +}; +static void setup_board_eeprom_env (void ) {char *name ="am64x_gpevm" ;@@ -197,6 +204,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_am64_evm_fdt_map); }static void setup_serial (void )
Signature · 2 lines
cheers, -roger
Re: [PATCH 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script
On 15:08-20240109, Roger Quadros wrote:
[..]
Quoted 8 lines
board/ti/am64x/evm.c int checkboard(void) · line 186
Quoted 4 lines
#ifdef
CONFIG_BOARD_LATE_INITboard/ti/am64x/evm.c +3
-0+static struct ti_fdt_map ti_am64_evm_fdt_map[] = { + {"am64x_gpevm" ,"k3-am642-evm.dtb" }, + {"am64x_skevm" ,"k3-am642-sk.dtb" },"
am64x_gpevm" and "am64x_skevm" strings are used multiple times in this file. seesetup_board_eeprom_env()
Quoted 5 lines
Please use a MACRO for them.
What is the logic of choosing this name and can it be updated at this point? e.g."gp" is misleading in the board name as the boards are now shipped with HS-FS chip and are no longer GP.
Intent of the series was to get rid of findfdt - it was not meant to cleanup existing name usage in the files. If there is a desire to do so, please - patches are welcome.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
PATCH 5/10 board: ti: am65x: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
--- board/ti/am65x/am65x.env | 3 --- board/ti/am65x/evm.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-)
board/ti/am65x/am65x.env +0 -3
@@ -5,9 +5,6 @@ #include <env/ti/k3_rproc.env> #endif -findfdt= - setenv name_fdt ti/k3-am654-base-board.dtb; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
board/ti/am65x/evm.c +2 -0
@@ -22,6 +22,7 @@#include <linux/printk.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_am65x_base_board () board_ti_is("AM6-COMPROCEVM")
@@ -141,6 +142,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (NULL ,NULL ); }static int init_daughtercard_det_gpio (char *gpio_name,struct gpio_desc *desc)
Signature · 1 line
2.43.0
PATCH 6/10 board: ti: j721e: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
--- board/ti/j721e/evm.c | 8 ++++++++ board/ti/j721e/j721e.env | 10 ---------- 2 files changed, 8 insertions(+), 10 deletions(-)
board/ti/j721e/evm.c +8 -0
@@ -16,6 +16,7 @@#include <dm.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_j721e_som () (board_ti_k3_is("J721EX-PM1-SOM") || \ board_ti_k3_is("J721EX-PM2-SOM"))
@@ -424,6 +425,12 @@ void configure_serdes_sierra(void) }#ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_j721e_evm_fdt_map[] = { + {"j721e" ,"k3-j721e-common-proc-board.dtb" }, + {"j721e-sk" ,"k3-j721e-sk.dtb" }, + {"j7200" ,"k3-j7200-common-proc-board.dtb" }, + {/* Sentinel. */ } +};static void setup_board_eeprom_env (void ) {char *name ="j721e" ;
@@ -443,6 +450,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_j721e_evm_fdt_map); }static void setup_serial (void )
board/ti/j721e/j721e.env +0 -10
@@ -7,16 +7,6 @@ #include <env/ti/k3_rproc.env> #endif -default_device_tree=ti/k3-j721e-common-proc-board.dtb -findfdt= - setenv name_fdt ${default_device_tree}; - if test $board_name = j721e; then - setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; - if test $board_name = j7200; then - setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; - if test $board_name = j721e-eaik || test $board_name = j721e-sk; then - setenv name_fdt ti/k3-j721e-sk.dtb; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000
Signature · 1 line
2.43.0
Re: [PATCH 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script
Quoted 25 lines · Nishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/j721e/evm.c | 8 ++++++++ board/ti/j721e/j721e.env | 10 ---------- 2 files changed, 8 insertions(+), 10 deletions(-)board/ti/j721e/evm.c +1
-0@@ -16,6 +16,7 @@#include <dm.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_j721e_som () (board_ti_k3_is("J721EX-PM1-SOM") || \ board_ti_k3_is("J721EX-PM2-SOM"))
board/ti/j721e/evm.c void configure_serdes_sierra(void) · line 430
Quoted 6 lines
board/ti/j721e/evm.c +3
-0@@ -424,6 +425,12 @@ void configure_serdes_sierra(void) }#ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_j721e_evm_fdt_map[] = { + {"j721e" ,"k3-j721e-common-proc-board.dtb" }, + {"j721e-sk", "k3-j721e-sk.dtb"},
You missed "j721e-eaik"
Quoted 35 lines
board/ti/j721e/evm.c +4
-0+ {"j7200", "k3-j7200-common-proc-board.dtb"}, + { /* Sentinel. */ } +};static void setup_board_eeprom_env (void ) {char *name ="j721e" ;@@ -443,6 +450,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_j721e_evm_fdt_map); }static void setup_serial (void )board/ti/j721e/j721e.env +0
-10@@ -7,16 +7,6 @@ #include <env/ti/k3_rproc.env> #endif -default_device_tree=ti/k3-j721e-common-proc-board.dtb -findfdt= - setenv name_fdt ${default_device_tree}; - if test $board_name = j721e; then - setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; - if test $board_name = j7200; then - setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; - if test $board_name = j721e-eaik || test $board_name = j721e-sk; then - setenv name_fdt ti/k3-j721e-sk.dtb; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000
Signature · 2 lines
cheers, -roger
Re: [PATCH 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script
Quoted 30 lines · Roger Quadros
Quoted 27 lines · Nishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
Signed-off-by Nishanth Menon <[email protected]>--- board/ti/j721e/evm.c | 8 ++++++++ board/ti/j721e/j721e.env | 10 ---------- 2 files changed, 8 insertions(+), 10 deletions(-)board/ti/j721e/evm.c +1
-0@@ -16,6 +16,7 @@#include <dm.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_j721e_som () (board_ti_k3_is("J721EX-PM1-SOM") || \ board_ti_k3_is("J721EX-PM2-SOM"))@@ -424,6 +425,12 @@ void configure_serdes_sierra(void) }
Quoted 6 lines
board/ti/j721e/evm.c void configure_serdes_sierra(void) · line 430
Quoted 4 lines
board/ti/j721e/evm.c +3
-0#ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_j721e_evm_fdt_map[] = { + {"j721e" ,"k3-j721e-common-proc-board.dtb" }, + {"j721e-sk", "k3-j721e-sk.dtb"},You missed "j721e-eaik"
Nope, it is intentional - eaik (the older name) is handled as sk in setup_board_eeprom_env board_name[1] ==> board_is_j721e_sk provides that abstraction[2]
[1] https://github.com/u-boot/u-boot/blob/master/board/ti/j721e/evm.c#L427
[2] https://github.com/u-boot/u-boot/blob/master/board/ti/j721e/evm.c#L23
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
PATCH 7/10 board: ti: j721s2: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
--- board/ti/j721s2/evm.c | 8 ++++++++ board/ti/j721s2/j721s2.env | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-)
board/ti/j721s2/evm.c +8 -0
@@ -23,6 +23,7 @@#include <dm/root.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" DECLARE_GLOBAL_DATA_PTR ;
@@ -114,6 +115,12 @@ int checkboard(void)return 0 ; } +static struct ti_fdt_map ti_j721s2_evm_fdt_map[] = { + {"j721s2" ,"k3-j721s2-common-proc-board.dtb" }, + {"am68-sk" ,"k3-am68-sk-base-board.dtb" }, + {/* Sentinel. */ } +}; +static void setup_board_eeprom_env (void ) {char *name ="j721s2" ;
@@ -131,6 +138,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_j721s2_evm_fdt_map); }static void setup_serial (void )
board/ti/j721s2/j721s2.env +0 -8
@@ -7,14 +7,6 @@ #include <env/ti/k3_rproc.env> #endif -default_device_tree=ti/k3-j721s2-common-proc-board.dtb -findfdt= - setenv name_fdt ${default_device_tree}; - if test $board_name = j721s2; then \ - setenv name_fdt ti/k3-j721s2-common-proc-board.dtb; fi; - if test $board_name = am68-sk; then - setenv name_fdt ti/k3-am68-sk-base-board.dtb; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000
Signature · 1 line
2.43.0
PATCH 8/10 board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
--- board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++ board/beagle/beagleboneai64/beagleboneai64.env | 1 - configs/j721e_beagleboneai64_a72_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)
board/beagle/beagleboneai64/beagleboneai64.c +14 -0
@@ -28,3 +28,17 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE ); + +env_set ("fdtfile" , fdtfile); + +return 0 ; +} +#endif
board/beagle/beagleboneai64/beagleboneai64.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
configs/j721e_beagleboneai64_a72_defconfig +2 -1
@@ -34,7 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOARD_LATE_INIT=y CONFIG_LOGLEVEL=7 CONFIG_SPL_MAX_SIZE=0xc0000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
Signature · 1 line
2.43.0
Re: [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
Quoted 20 lines · Nishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
Signed-off-by Nishanth Menon <[email protected]>--- board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++ board/beagle/beagleboneai64/beagleboneai64.env | 1 - configs/j721e_beagleboneai64_a72_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)board/beagle/beagleboneai64/beagleboneai64.c +0
-0@@ -28,3 +28,17 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize ();
board/beagle/beagleboneai64/beagleboneai64.c int dram_init_banksize(void) · line 39
Quoted 10 lines
board/beagle/beagleboneai64/beagleboneai64.c +9
-0} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE ); +
Why not use your new ti_set_fdt_env() helper? It makes this board consistent with TI boards (sets "name_fdt" and adds warning for "findfdt" like your commit message says you do..).
Andrew
Quoted 29 lines
board/beagle/beagleboneai64/beagleboneai64.c +5
-0+env_set ("fdtfile" , fdtfile); + + return 0; +} +#endif board/beagle/beagleboneai64/beagleboneai64.env +0
-1@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Imageconfigs/j721e_beagleboneai64_a72_defconfig +2
-1@@ -34,7 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOARD_LATE_INIT=y CONFIG_LOGLEVEL=7 CONFIG_SPL_MAX_SIZE=0xc0000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
Re: [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
Quoted 10 lines · Andrew Davis
board/beagle/beagleboneai64/beagleboneai64.c int dram_init_banksize(void) · line 39
Quoted 8 lines
board/beagle/beagleboneai64/beagleboneai64.c +8
-0+#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE ); +Why not use your new
ti_set_fdt_env()helper? It makes this board
I had it originally, but did not want the code to depend on board/ti/common functions. So dropped it in later version.
Quoted 2 lines
consistent with TI boards (sets "
name_fdt" and adds warning for "findfdt" like your commit message says you do..).
Will fix up the commit message in the next revision
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonQuoted 19 lines · Nishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
Signed-off-by Nishanth Menon <[email protected]>--- board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++ board/beagle/beagleboneai64/beagleboneai64.env | 1 - configs/j721e_beagleboneai64_a72_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)board/beagle/beagleboneai64/beagleboneai64.c +0
-0@@ -28,3 +28,17 @@ int dram_init_banksize(void) {
board/beagle/beagleboneai64/beagleboneai64.c int dram_init_banksize(void) · line 38
Quoted 10 lines
board/beagle/beagleboneai64/beagleboneai64.c +8
-0return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE );
This would set the board to using the control DT, not boot DT. Is that what you meant?
But anyway, why not just hard code the FDT path/name here since there is only one for this board? I don't see the value in the extra logic of using the config values (or having a fdt_map). (Same for beagleplay)
Quoted 32 lines
board/beagle/beagleboneai64/beagleboneai64.c +6
-0+ +env_set ("fdtfile" , fdtfile); + + return 0; +} +#endif board/beagle/beagleboneai64/beagleboneai64.env +0
-1@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Imageconfigs/j721e_beagleboneai64_a72_defconfig +2
-1@@ -34,7 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOARD_LATE_INIT=y CONFIG_LOGLEVEL=7 CONFIG_SPL_MAX_SIZE=0xc0000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=ySignature · 1 line
2.43.0
Re: [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
Quoted 26 lines · Jon Humphreys
Quoted 24 lines · Nishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
Signed-off-by Nishanth Menon <[email protected]>--- board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++ board/beagle/beagleboneai64/beagleboneai64.env | 1 - configs/j721e_beagleboneai64_a72_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)board/beagle/beagleboneai64/beagleboneai64.c +3
-0@@ -28,3 +28,17 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void )
Quoted 8 lines
board/beagle/beagleboneai64/beagleboneai64.c int dram_init_banksize(void) · line 38
Quoted 5 lines
board/beagle/beagleboneai64/beagleboneai64.c +5
-0+{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE );This would set the board to using the control DT, not boot DT. Is that what you meant?
control DT file name. not the content.
Quoted 3 lines
But anyway, why not just hard code the FDT path/name here since there is only one for this board? I don't see the value in the extra logic of using the config values (or having a
fdt_map). (Same for beagleplay)
because there are potentially variants being privately discussed for both the platforms - though the timelines are unknown at this point. This will allow fragments to replace the DEFAULT_DEVICE_TREE to the variant and rest of the logic will *just work*.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
PATCH 9/10 board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed.
--- board/beagle/beagleplay/beagleplay.c | 14 ++++++++++++++ board/beagle/beagleplay/beagleplay.env | 1 - configs/am62x_beagleplay_a53_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)
board/beagle/beagleplay/beagleplay.c +14 -0
@@ -27,3 +27,17 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_EVM_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE ); + +env_set ("fdtfile" , fdtfile); + +return 0 ; +} +#endif
board/beagle/beagleplay/beagleplay.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
configs/am62x_beagleplay_a53_defconfig +2 -1
@@ -33,7 +33,8 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80c80000
Signature · 1 line
2.43.0
PATCH 10/10 include: env: ti: Drop default_findfdt
In reply to Nishanth MenonWe shouldn't need finfdt anymore. Drop the env script.
--- include/env/ti/default_findfdt.env | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 include/env/ti/default_findfdt.env
include/env/ti/default_findfdt.env deleted +0 -12
@@ -1,12 +0,0 @@ -default_device_tree=CONFIG_DEFAULT_DEVICE_TREE -default_device_tree_arch=ti -#ifdef CONFIG_ARM64 -findfdt= - setenv name_fdt ${default_device_tree_arch}/${default_device_tree}.dtb; - setenv fdtfile ${name_fdt} -#else -default_device_tree_subarch=omap -findfdt= - setenv name_fdt ${default_device_tree_arch}/${default_device_tree_subarch}/${default_device_tree}.dtb; - setenv fdtfile ${name_fdt} -#endif
Signature · 1 line
2.43.0
Quoted 9 lines · Nishanth Menon
This is a wide cleanup to switch to setting fdtfile using
env_setinstead of scripted magic. 'fdtfile' is expected to be set by default. This allows the stdboot triggered efi loaders to find the correct OS device tree file.This is a refresh of
https://lore.kernel.org/all/[email protected]/ which was the wrong approach.
Quoted 7 lines
Bootlogs: https://gist.github.com/nmenon/2f4a142c1bcaa09d544b1f2e206ea134
NOTE: There are a couple of checkpatch WARN (around
LATE_INIT) and CHECK (fdt_ops#ifdeffery) that on closer inspection looks fine and consistent with other similar usage.Based on next branch at:
c2c598e87cfeMerge branch 'staging' of https://source.denx.de/u-boot/custodians/u-boot-tegra into next
This overall seems fine, thanks.
Signature · 1 line
Tom