Skip to contentSkip to conversation

wilc1000: move wilc driver out of staging

PATCH In review [email protected] 4 participants 11 messages Jun 25, 2020 – Jul 2, 2020

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

PATCH 1/1 wilc1000: move wilc driver out of staging

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

---

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3]. https://lore.kernel.org/linux-wireless/[email protected]/

 .../net/wireless}/microchip,wilc1000.yaml         |  0
 MAINTAINERS                                       | 14 +++++++-------
 drivers/net/wireless/Kconfig                      |  1 +
 drivers/net/wireless/Makefile                     |  1 +
 drivers/net/wireless/microchip/Kconfig            | 15 +++++++++++++++
 drivers/net/wireless/microchip/Makefile           |  2 ++
 .../wireless/microchip}/wilc1000/Kconfig          |  0
 .../wireless/microchip}/wilc1000/Makefile         |  0
 .../wireless/microchip}/wilc1000/cfg80211.c       |  0
 .../wireless/microchip}/wilc1000/cfg80211.h       |  0
 .../wireless/microchip}/wilc1000/fw.h             |  0
 .../wireless/microchip}/wilc1000/hif.c            |  0
 .../wireless/microchip}/wilc1000/hif.h            |  0
 .../wireless/microchip}/wilc1000/mon.c            |  0
 .../wireless/microchip}/wilc1000/netdev.c         |  0
 .../wireless/microchip}/wilc1000/netdev.h         |  0
 .../wireless/microchip}/wilc1000/sdio.c           |  0
 .../wireless/microchip}/wilc1000/spi.c            |  0
 .../wireless/microchip}/wilc1000/wlan.c           |  0
 .../wireless/microchip}/wilc1000/wlan.h           |  0
 .../wireless/microchip}/wilc1000/wlan_cfg.c       |  0
 .../wireless/microchip}/wilc1000/wlan_cfg.h       |  0
 .../wireless/microchip}/wilc1000/wlan_if.h        |  0
 drivers/staging/Kconfig                           |  2 --
 drivers/staging/Makefile                          |  1 -
 25 files changed, 26 insertions(+), 10 deletions(-)
 rename {drivers/staging/wilc1000 => Documentation/devicetree/bindings/net/wireless}/microchip,wilc1000.yaml (100%)
 create mode 100644 drivers/net/wireless/microchip/Kconfig
 create mode 100644 drivers/net/wireless/microchip/Makefile
 rename drivers/{staging => net/wireless/microchip}/wilc1000/Kconfig (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/Makefile (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/cfg80211.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/cfg80211.h (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/fw.h (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/hif.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/hif.h (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/mon.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/netdev.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/netdev.h (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/sdio.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/spi.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/wlan.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/wlan.h (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/wlan_cfg.c (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/wlan_cfg.h (100%)
 rename drivers/{staging => net/wireless/microchip}/wilc1000/wlan_if.h (100%)
Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml renamed from drivers/staging/wilc1000/microchip,wilc1000.yaml +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/microchip,wilc1000.yaml
rename to Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
MAINTAINERS +7 -7
index 68f21d46614c..7dae51e32254 100644
@@ -11362,6 +11362,13 @@ L:	[email protected] (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
 
+MICROCHIP WILC1000 WIFI DRIVER
+M:	Adham Abozaeid <[email protected]>
+M:	Ajay Singh <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	drivers/net/wireless/microchip/wilc1000/
+
 MICROCHIP XDMA DRIVER
 M:	Ludovic Desroches <[email protected]>
 L:	[email protected]
@@ -16251,13 +16258,6 @@ M:	Forest Bond <[email protected]>
 S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
-STAGING - WILC1000 WIFI DRIVER
-M:	Adham Abozaeid <[email protected]>
-M:	Ajay Singh <[email protected]>
-L:	[email protected]
-S:	Supported
-F:	drivers/staging/wilc1000/
-
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <[email protected]>
 L:	[email protected]
drivers/net/wireless/Kconfig +1 -0
index 8ab62bb6b853..be0de242d8fd 100644
@@ -47,6 +47,7 @@ source "drivers/net/wireless/st/Kconfig"
 source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zydas/Kconfig"
 source "drivers/net/wireless/quantenna/Kconfig"
+source "drivers/net/wireless/microchip/Kconfig"
 
 config PCMCIA_RAYCS
 	tristate "Aviator/Raytheon 2.4GHz wireless support"
drivers/net/wireless/Makefile +1 -0
index 6cfe74515c95..f9a51c2889ca 100644
@@ -19,6 +19,7 @@ obj-$(CONFIG_WLAN_VENDOR_ST) += st/
 obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
 obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
 obj-$(CONFIG_WLAN_VENDOR_QUANTENNA) += quantenna/
+obj-$(CONFIG_WLAN_VENDOR_MICROCHIP) += microchip/
 
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
drivers/net/wireless/microchip/Kconfig new file +15 -0
new file mode 100644
index 000000000000..a6b46fb6b1ec
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+config WLAN_VENDOR_MICROCHIP
+	bool "Microchip devices"
+	default y
+	help
+	If you have a wireless card belonging to this class, say Y.
+
+	Note that the answer to this question doesn't directly affect the
+	kernel: saying N will just cause the configurator to skip all the
+	questions about these cards. If you say Y, you will be asked for
+	your specific card in the following questions.
+
+if WLAN_VENDOR_MICROCHIP
+source "drivers/net/wireless/microchip/wilc1000/Kconfig"
+endif # WLAN_VENDOR_MICROCHIP
drivers/net/wireless/microchip/Makefile new file +2 -0
new file mode 100644
index 000000000000..73b763c7393e
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_WILC1000)		+= wilc1000/
drivers/net/wireless/microchip/wilc1000/Kconfig renamed from drivers/staging/wilc1000/Kconfig +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/Kconfig
rename to drivers/net/wireless/microchip/wilc1000/Kconfig
drivers/net/wireless/microchip/wilc1000/Makefile renamed from drivers/staging/wilc1000/Makefile +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/Makefile
rename to drivers/net/wireless/microchip/wilc1000/Makefile
drivers/net/wireless/microchip/wilc1000/cfg80211.c renamed from drivers/staging/wilc1000/cfg80211.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/cfg80211.c
rename to drivers/net/wireless/microchip/wilc1000/cfg80211.c
drivers/net/wireless/microchip/wilc1000/cfg80211.h renamed from drivers/staging/wilc1000/cfg80211.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/cfg80211.h
rename to drivers/net/wireless/microchip/wilc1000/cfg80211.h
drivers/net/wireless/microchip/wilc1000/fw.h renamed from drivers/staging/wilc1000/fw.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/fw.h
rename to drivers/net/wireless/microchip/wilc1000/fw.h
drivers/net/wireless/microchip/wilc1000/hif.c renamed from drivers/staging/wilc1000/hif.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/hif.c
rename to drivers/net/wireless/microchip/wilc1000/hif.c
drivers/net/wireless/microchip/wilc1000/hif.h renamed from drivers/staging/wilc1000/hif.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/hif.h
rename to drivers/net/wireless/microchip/wilc1000/hif.h
drivers/net/wireless/microchip/wilc1000/mon.c renamed from drivers/staging/wilc1000/mon.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/mon.c
rename to drivers/net/wireless/microchip/wilc1000/mon.c
drivers/net/wireless/microchip/wilc1000/netdev.c renamed from drivers/staging/wilc1000/netdev.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/netdev.c
rename to drivers/net/wireless/microchip/wilc1000/netdev.c
drivers/net/wireless/microchip/wilc1000/netdev.h renamed from drivers/staging/wilc1000/netdev.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/netdev.h
rename to drivers/net/wireless/microchip/wilc1000/netdev.h
drivers/net/wireless/microchip/wilc1000/sdio.c renamed from drivers/staging/wilc1000/sdio.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/sdio.c
rename to drivers/net/wireless/microchip/wilc1000/sdio.c
drivers/net/wireless/microchip/wilc1000/spi.c renamed from drivers/staging/wilc1000/spi.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/spi.c
rename to drivers/net/wireless/microchip/wilc1000/spi.c
drivers/net/wireless/microchip/wilc1000/wlan.c renamed from drivers/staging/wilc1000/wlan.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/wlan.c
rename to drivers/net/wireless/microchip/wilc1000/wlan.c
drivers/net/wireless/microchip/wilc1000/wlan.h renamed from drivers/staging/wilc1000/wlan.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/wlan.h
rename to drivers/net/wireless/microchip/wilc1000/wlan.h
drivers/net/wireless/microchip/wilc1000/wlan_cfg.c renamed from drivers/staging/wilc1000/wlan_cfg.c +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/wlan_cfg.c
rename to drivers/net/wireless/microchip/wilc1000/wlan_cfg.c
drivers/net/wireless/microchip/wilc1000/wlan_cfg.h renamed from drivers/staging/wilc1000/wlan_cfg.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/wlan_cfg.h
rename to drivers/net/wireless/microchip/wilc1000/wlan_cfg.h
drivers/net/wireless/microchip/wilc1000/wlan_if.h renamed from drivers/staging/wilc1000/wlan_if.h +0 -0
similarity index 100%
rename from drivers/staging/wilc1000/wlan_if.h
rename to drivers/net/wireless/microchip/wilc1000/wlan_if.h
drivers/staging/Kconfig +0 -2
index 4ec5528f89fa..b3fb4d41e231 100644
@@ -84,8 +84,6 @@ source "drivers/staging/fbtft/Kconfig"
 
 source "drivers/staging/fsl-dpaa2/Kconfig"
 
-source "drivers/staging/wilc1000/Kconfig"
-
 source "drivers/staging/most/Kconfig"
 
 source "drivers/staging/ks7010/Kconfig"
drivers/staging/Makefile +0 -1
index 4d34198151b3..3d8c7ea21a10 100644
@@ -32,7 +32,6 @@ obj-$(CONFIG_UNISYSSPAR)	+= unisys/
 obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clocking-wizard/
 obj-$(CONFIG_FB_TFT)		+= fbtft/
 obj-$(CONFIG_FSL_DPAA2)		+= fsl-dpaa2/
-obj-$(CONFIG_WILC1000)		+= wilc1000/
 obj-$(CONFIG_MOST)		+= most/
 obj-$(CONFIG_KS7010)		+= ks7010/
 obj-$(CONFIG_GREYBUS)		+= greybus/
Signature · 1 line
2.24.0
#1 lore raw
I love your patch! Perhaps something to improve:

Hi,

I love your patch! Perhaps something to improve:

[auto build test WARNING on staging/staging-testing]
[also build test WARNING on wireless-drivers-next/master wireless-drivers/master v5.8-rc2 next-20200625] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Ajay-Kathat-microchip-com/wilc1000-move-wilc-driver-out-of-staging/20200625-203957
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 9bea6eb3f59cb2fad8b46d91c666a17d0aa53456
config: ia64-randconfig-r013-20200624 (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

drivers/net/wireless/microchip/wilc1000/mon.c: In function 'wilc_wfi_init_mon_interface':

>> drivers/net/wireless/microchip/wilc1000/mon.c:232:2: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]
     232 |  strncpy(wl->monitor_dev->name, name, IFNAMSIZ);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

vim +/strncpy +232 drivers/net/wireless/microchip/wilc1000/mon.c

c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  216  
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  217  struct net_device *wilc_wfi_init_mon_interface(struct wilc *wl,
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  218  					       const char *name,
1b7c69e84bcea7 drivers/staging/wilc1000/linux_mon.c Anchal Jain 2016-03-14  219  					       struct net_device *real_dev)
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  220  {
73d359a08b76da drivers/staging/wilc1000/linux_mon.c Ajay Singh  2018-05-02  221  	struct wilc_wfi_mon_priv *priv;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  222  
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  223  	/* If monitor interface is already initialized, return it */
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  224  	if (wl->monitor_dev)
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  225  		return wl->monitor_dev;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  226  
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  227  	wl->monitor_dev = alloc_etherdev(sizeof(struct wilc_wfi_mon_priv));
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  228  	if (!wl->monitor_dev)
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  229  		return NULL;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  230  
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  231  	wl->monitor_dev->type = ARPHRD_IEEE80211_RADIOTAP;
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02 @232  	strncpy(wl->monitor_dev->name, name, IFNAMSIZ);
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  233  	wl->monitor_dev->name[IFNAMSIZ - 1] = 0;
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  234  	wl->monitor_dev->netdev_ops = &wilc_wfi_netdev_ops;
9bc061e8805487 drivers/staging/wilc1000/wilc_mon.c  Ajay Singh  2019-06-26  235  	wl->monitor_dev->needs_free_netdev = true;
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  236  
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  237  	if (register_netdevice(wl->monitor_dev)) {
d892c97c889a77 drivers/staging/wilc1000/linux_mon.c Leo Kim     2016-02-22  238  		netdev_err(real_dev, "register_netdevice failed\n");
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  239  		return NULL;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  240  	}
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  241  	priv = netdev_priv(wl->monitor_dev);
60959e53f83988 drivers/staging/wilc1000/linux_mon.c Leo Kim     2016-02-22  242  	if (!priv)
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  243  		return NULL;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  244  
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  245  	priv->real_ndev = real_dev;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  246  
588713006ea49d drivers/staging/wilc1000/linux_mon.c Ajay Singh  2019-02-02  247  	return wl->monitor_dev;
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  248  }
c5c77ba18ea66a drivers/staging/wilc1000/linux_mon.c Johnny Kim  2015-05-11  249  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#2 lore raw
In reply to [email protected]
Quoted 16 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

[...]

drivers/net/wireless/Kconfig source "drivers/net/wireless/st/Kconfig" · line 50

Quoted 7 lines
drivers/net/wireless/Kconfig +1 -0
@@ -47,6 +47,7 @@ source "drivers/net/wireless/st/Kconfig"
 source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zydas/Kconfig"
 source "drivers/net/wireless/quantenna/Kconfig"
+source "drivers/net/wireless/microchip/Kconfig"

This should be in alphabetical order.

drivers/net/wireless/Makefile obj-$(CONFIG_WLAN_VENDOR_ST) += st/ · line 22

Quoted 7 lines
drivers/net/wireless/Makefile +1 -0
@@ -19,6 +19,7 @@ obj-$(CONFIG_WLAN_VENDOR_ST) += st/
 obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
 obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
 obj-$(CONFIG_WLAN_VENDOR_QUANTENNA) += quantenna/
+obj-$(CONFIG_WLAN_VENDOR_MICROCHIP) += microchip/

And this as well.

I fixed these in the topic branch, please double check:

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?h=wilc1000-move-out-of-staging&id=5625f965d7644b4dc6a71d74021cfe093ad34eea

I have not pulled that branch yet into master so we can make changes still.

Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
author maintainer
#3 lore raw
Quoted 43 lines · Kalle Valo

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 16 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

[...]

drivers/net/wireless/Kconfig source "drivers/net/wireless/st/Kconfig" · line 50

Quoted 7 lines
drivers/net/wireless/Kconfig +1 -0
@@ -47,6 +47,7 @@ source "drivers/net/wireless/st/Kconfig"
 source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zydas/Kconfig"
 source "drivers/net/wireless/quantenna/Kconfig"
+source "drivers/net/wireless/microchip/Kconfig"

This should be in alphabetical order.

drivers/net/wireless/Makefile obj-$(CONFIG_WLAN_VENDOR_ST) += st/ · line 22

Quoted 7 lines
drivers/net/wireless/Makefile +1 -0
@@ -19,6 +19,7 @@ obj-$(CONFIG_WLAN_VENDOR_ST) += st/
 obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
 obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
 obj-$(CONFIG_WLAN_VENDOR_QUANTENNA) += quantenna/
+obj-$(CONFIG_WLAN_VENDOR_MICROCHIP) += microchip/

And this as well.

Quoted 1 line

I fixed these in the topic branch, please double check:

Thanks Kalle.
I just checked the patch and it looks good.

Regards,
Ajay

Quoted 8 lines

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?h=wilc1000-move-out-of-staging&id=5625f965d7644b4dc6a71d74021cfe093ad34eea

I have not pulled that branch yet into master so we can make changes still.>
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

#4 lore raw
In reply to [email protected]
I love your patch! Perhaps something to improve:

Hi,

I love your patch! Perhaps something to improve:

[auto build test WARNING on staging/staging-testing]
[also build test WARNING on wireless-drivers-next/master wireless-drivers/master v5.8-rc3 next-20200629] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Ajay-Kathat-microchip-com/wilc1000-move-wilc-driver-out-of-staging/20200625-203957
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 9bea6eb3f59cb2fad8b46d91c666a17d0aa53456
config: x86_64-randconfig-a005-20200630 (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project cf1d04484344be52ada8178e41d18fd15a9b880c)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

In file included from kernel/rcu/update.c:587:
kernel/rcu/tasks.h:405:6: warning: no previous prototype for function 'rcu_tasks_postscan'
void rcu_tasks_postscan(struct list_head
^
kernel/rcu/tasks.h:405:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void rcu_tasks_postscan(struct list_head
^
static
kernel/rcu/tasks.h:757:6: warning: no previous prototype for function 'rcu_read_unlock_trace_special'
void rcu_read_unlock_trace_special(struct task_struct int nesting)
^
kernel/rcu/tasks.h:757:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void rcu_read_unlock_trace_special(struct task_struct int nesting)
^
static
kernel/rcu/tasks.h:1135:6: warning: no previous prototype for function 'synchronize_rcu_tasks_trace'
void synchronize_rcu_tasks_trace(void)
^
kernel/rcu/tasks.h:1135:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void synchronize_rcu_tasks_trace(void)
^
static
kernel/rcu/tasks.h:1148:6: warning: no previous prototype for function 'rcu_barrier_tasks_trace'
void rcu_barrier_tasks_trace(void)
^
kernel/rcu/tasks.h:1148:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void rcu_barrier_tasks_trace(void)
^
static
kernel/events/core.c:6490:6: warning: no previous prototype for function 'perf_pmu_snapshot_aux'
long perf_pmu_snapshot_aux(struct perf_buffer
^
kernel/events/core.c:6490:1: note: declare 'static' if the function is not intended to be used outside of this translation unit long perf_pmu_snapshot_aux(struct perf_buffer
^
static

>> drivers/net/wireless/microchip/wilc1000/cfg80211.c:49:42: warning: unused variable 'wowlan_support'

static const struct wiphy_wowlan_support wowlan_support = {
^
kernel/trace/trace.c:1535:37: warning: unused variable 'tracing_max_lat_fops'
static const struct file_operations tracing_max_lat_fops;
^
kernel/sched/core.c:2117:6: warning: no previous prototype for function 'sched_set_stop_task'
void sched_set_stop_task(int cpu, struct task_struct
^
kernel/sched/core.c:2117:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void sched_set_stop_task(int cpu, struct task_struct
^
static
kernel/sched/core.c:4263:35: warning: no previous prototype for function 'schedule_user'
asmlinkage __visible void __sched schedule_user(void)
^
kernel/sched/core.c:4263:22: note: declare 'static' if the function is not intended to be used outside of this translation unit asmlinkage __visible void __sched schedule_user(void)
^
static
4 warnings generated.
kernel/sched/core.c:808:28: warning: unused function 'uclamp_bucket_base_value'
static inline unsigned int uclamp_bucket_base_value(unsigned int clamp_value)
^
kernel/sched/core.c:1047:1: warning: unused function 'uclamp_update_active'
uclamp_update_active(struct task_struct enum uclamp_id clamp_id)
^
kernel/trace/trace_seq.c:142: warning: Function parameter or member 'args' not described in 'trace_seq_vprintf' kernel/bpf/core.c:1353:12: warning: no previous prototype for function 'bpf_probe_read_kernel'
u64 __weak bpf_probe_read_kernel(void u32 size, const void
^
kernel/bpf/core.c:1353:1: note: declare 'static' if the function is not intended to be used outside of this translation unit u64 __weak bpf_probe_read_kernel(void u32 size, const void
^
static
kernel/time/hrtimer.c:120:21: warning: initializer overrides prior initialization of this subobject
= HRTIMER_BASE_REALTIME,
^~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:118:27: note: previous initialization is here
[0 ... MAX_CLOCKS - 1] = HRTIMER_MAX_CLOCK_BASES,
^~~~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:121:22: warning: initializer overrides prior initialization of this subobject
= HRTIMER_BASE_MONOTONIC,
^~~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:118:27: note: previous initialization is here
[0 ... MAX_CLOCKS - 1] = HRTIMER_MAX_CLOCK_BASES,
^~~~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:122:21: warning: initializer overrides prior initialization of this subobject
= HRTIMER_BASE_BOOTTIME,
^~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:118:27: note: previous initialization is here
[0 ... MAX_CLOCKS - 1] = HRTIMER_MAX_CLOCK_BASES,
^~~~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:123:17: warning: initializer overrides prior initialization of this subobject
= HRTIMER_BASE_TAI,
^~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:118:27: note: previous initialization is here
[0 ... MAX_CLOCKS - 1] = HRTIMER_MAX_CLOCK_BASES,
^~~~~~~~~~~~~~~~~~~~~~~
kernel/dma/swiotlb.c:278:1: warning: no previous prototype for function 'swiotlb_late_init_with_default_size' swiotlb_late_init_with_default_size(size_t default_size)
^
kernel/dma/swiotlb.c:277:1: note: declare 'static' if the function is not intended to be used outside of this translation unit int
^
static
kernel/time/hrtimer.c:143:20: warning: unused function 'is_migration_base'
static inline bool is_migration_base(struct hrtimer_clock_base
^
kernel/time/hrtimer.c:617:19: warning: unused function 'hrtimer_hres_active'
static inline int hrtimer_hres_active(void)
^
1 warning generated.
kernel/trace/ring_buffer.c:1141: warning: Function parameter or member 'cpu_buffer' not described in 'rb_check_list' kernel/trace/ring_buffer.c:1141: warning: Function parameter or member 'list' not described in 'rb_check_list' 1 warning generated.
kernel/panic.c:85:13: warning: no previous prototype for function 'panic_smp_self_stop'
void __weak panic_smp_self_stop(void)
^
kernel/panic.c:85:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void __weak panic_smp_self_stop(void)
^
static
kernel/panic.c:95:13: warning: no previous prototype for function 'nmi_panic_self_stop'
void __weak nmi_panic_self_stop(struct pt_regs
^
kernel/panic.c:95:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void __weak nmi_panic_self_stop(struct pt_regs
^
static
kernel/panic.c:106:13: warning: no previous prototype for function 'crash_smp_send_stop'
void __weak crash_smp_send_stop(void)
^
kernel/panic.c:106:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void __weak crash_smp_send_stop(void)
^
static
kernel/locking/lockdep.c:668:4: warning: format specifies type 'short' but the argument has type 'int' class->wait_type_outer class->wait_type_inner,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3 warnings generated.
--

>> drivers/net/wireless/microchip/wilc1000/cfg80211.c:49:42: warning: unused variable 'wowlan_support' [-Wunused-const-variable]
   static const struct wiphy_wowlan_support wowlan_support = {
                                            ^

1 warning generated.
drivers/net/ethernet/intel/e1000/e1000_hw.c:1907: warning: Excess function parameter 'mii_reg' description in 'e1000_config_mac_to_phy' drivers/net/ethernet/intel/e1000/e1000_hw.c:2930: warning: Function parameter or member 'phy_data' not described in 'e1000_write_phy_reg' drivers/net/ethernet/intel/e1000/e1000_hw.c:2930: warning: Excess function parameter 'data' description in 'e1000_write_phy_reg' drivers/net/ethernet/intel/e1000/e1000_hw.c:4788: warning: Excess function parameter 'tx_packets' description in 'e1000_update_adaptive' drivers/net/ethernet/intel/e1000/e1000_hw.c:4788: warning: Excess function parameter 'total_collisions' description in 'e1000_update_adaptive' drivers/net/ethernet/intel/e1000/e1000_hw.c:5079: warning: Excess function parameter 'downshift' description in 'e1000_check_downshift' drivers/net/ethernet/intel/e1000/e1000_main.c:212: warning: Function parameter or member 'hw' not described in 'e1000_get_hw_dev' drivers/net/ethernet/intel/e1000/e1000_main.c:365: warning: Function parameter or member 'adapter' not described in 'e1000_configure' drivers/net/ethernet/intel/e1000/e1000_main.c:3500: warning: Function parameter or member 'txqueue' not described in 'e1000_tx_timeout' drivers/net/ethernet/intel/e1000/e1000_main.c:3799: warning: Function parameter or member 'napi' not described in 'e1000_clean' drivers/net/ethernet/intel/e1000/e1000_main.c:3799: warning: Function parameter or member 'budget' not described in 'e1000_clean' drivers/net/ethernet/intel/e1000/e1000_main.c:3799: warning: Excess function parameter 'adapter' description in 'e1000_clean' drivers/net/ethernet/intel/e1000/e1000_main.c:3830: warning: Function parameter or member 'tx_ring' not described in 'e1000_clean_tx_irq' drivers/net/ethernet/intel/e1000/e1000_main.c:3946: warning: Function parameter or member 'skb' not described in 'e1000_rx_checksum' drivers/net/ethernet/intel/e1000/e1000_main.c:3946: warning: Excess function parameter 'sk_buff' description in 'e1000_rx_checksum' drivers/net/ethernet/intel/e1000/e1000_main.c:3982: warning: Function parameter or member 'bi' not described in 'e1000_consume_page' drivers/net/ethernet/intel/e1000/e1000_main.c:3982: warning: Function parameter or member 'skb' not described in 'e1000_consume_page' drivers/net/ethernet/intel/e1000/e1000_main.c:3982: warning: Function parameter or member 'length' not described in 'e1000_consume_page' drivers/net/ethernet/intel/e1000/e1000_main.c:4020: warning: Function parameter or member 'stats' not described in 'e1000_tbi_adjust_stats' drivers/net/ethernet/intel/e1000/e1000_main.c:4561: warning: Function parameter or member 'rx_ring' not described in 'e1000_alloc_rx_buffers' drivers/net/ethernet/intel/e1000/e1000_main.c:4561: warning: Function parameter or member 'cleaned_count' not described in 'e1000_alloc_rx_buffers' drivers/net/ethernet/intel/e1000/e1000_main.c:4674: warning: Function parameter or member 'adapter' not described in 'e1000_smartspeed' drivers/net/ethernet/intel/e1000/e1000_main.c:4733: warning: Function parameter or member 'netdev' not described in 'e1000_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4733: warning: Function parameter or member 'ifr' not described in 'e1000_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4733: warning: Function parameter or member 'cmd' not described in 'e1000_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4752: warning: Function parameter or member 'netdev' not described in 'e1000_mii_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4752: warning: Function parameter or member 'ifr' not described in 'e1000_mii_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4752: warning: Function parameter or member 'cmd' not described in 'e1000_mii_ioctl'
--

>> drivers/net/wireless/microchip/wilc1000/cfg80211.c:49:42: warning: unused variable 'wowlan_support' [-Wunused-const-variable]
   static const struct wiphy_wowlan_support wowlan_support = {
                                            ^
   1 warning generated.
--
>> drivers/net/wireless/microchip/wilc1000/cfg80211.c:49:42: warning: unused variable 'wowlan_support' [-Wunused-const-variable]
   static const struct wiphy_wowlan_support wowlan_support = {
                                            ^

1 warning generated.
drivers/net/ethernet/intel/e1000/e1000_hw.c:1907: warning: Excess function parameter 'mii_reg' description in 'e1000_config_mac_to_phy' drivers/net/ethernet/intel/e1000/e1000_hw.c:2930: warning: Function parameter or member 'phy_data' not described in 'e1000_write_phy_reg' drivers/net/ethernet/intel/e1000/e1000_hw.c:2930: warning: Excess function parameter 'data' description in 'e1000_write_phy_reg' drivers/net/ethernet/intel/e1000/e1000_hw.c:4788: warning: Excess function parameter 'tx_packets' description in 'e1000_update_adaptive' drivers/net/ethernet/intel/e1000/e1000_hw.c:4788: warning: Excess function parameter 'total_collisions' description in 'e1000_update_adaptive' drivers/net/ethernet/intel/e1000/e1000_hw.c:5079: warning: Excess function parameter 'downshift' description in 'e1000_check_downshift' drivers/net/ethernet/intel/e1000/e1000_main.c:212: warning: Function parameter or member 'hw' not described in 'e1000_get_hw_dev' drivers/net/ethernet/intel/e1000/e1000_main.c:365: warning: Function parameter or member 'adapter' not described in 'e1000_configure' drivers/net/ethernet/intel/e1000/e1000_main.c:3500: warning: Function parameter or member 'txqueue' not described in 'e1000_tx_timeout' drivers/net/ethernet/intel/e1000/e1000_main.c:3799: warning: Function parameter or member 'napi' not described in 'e1000_clean' drivers/net/ethernet/intel/e1000/e1000_main.c:3799: warning: Function parameter or member 'budget' not described in 'e1000_clean' drivers/net/ethernet/intel/e1000/e1000_main.c:3799: warning: Excess function parameter 'adapter' description in 'e1000_clean' drivers/net/ethernet/intel/e1000/e1000_main.c:3830: warning: Function parameter or member 'tx_ring' not described in 'e1000_clean_tx_irq' drivers/net/ethernet/intel/e1000/e1000_main.c:3946: warning: Function parameter or member 'skb' not described in 'e1000_rx_checksum' drivers/net/ethernet/intel/e1000/e1000_main.c:3946: warning: Excess function parameter 'sk_buff' description in 'e1000_rx_checksum' drivers/net/ethernet/intel/e1000/e1000_main.c:3982: warning: Function parameter or member 'bi' not described in 'e1000_consume_page' drivers/net/ethernet/intel/e1000/e1000_main.c:3982: warning: Function parameter or member 'skb' not described in 'e1000_consume_page' drivers/net/ethernet/intel/e1000/e1000_main.c:3982: warning: Function parameter or member 'length' not described in 'e1000_consume_page' drivers/net/ethernet/intel/e1000/e1000_main.c:4020: warning: Function parameter or member 'stats' not described in 'e1000_tbi_adjust_stats' drivers/net/ethernet/intel/e1000/e1000_main.c:4561: warning: Function parameter or member 'rx_ring' not described in 'e1000_alloc_rx_buffers' drivers/net/ethernet/intel/e1000/e1000_main.c:4561: warning: Function parameter or member 'cleaned_count' not described in 'e1000_alloc_rx_buffers' drivers/net/ethernet/intel/e1000/e1000_main.c:4674: warning: Function parameter or member 'adapter' not described in 'e1000_smartspeed' drivers/net/ethernet/intel/e1000/e1000_main.c:4733: warning: Function parameter or member 'netdev' not described in 'e1000_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4733: warning: Function parameter or member 'ifr' not described in 'e1000_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4733: warning: Function parameter or member 'cmd' not described in 'e1000_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4752: warning: Function parameter or member 'netdev' not described in 'e1000_mii_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4752: warning: Function parameter or member 'ifr' not described in 'e1000_mii_ioctl' drivers/net/ethernet/intel/e1000/e1000_main.c:4752: warning: Function parameter or member 'cmd' not described in 'e1000_mii_ioctl'
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
WARNING: modpost: Symbol info of vmlinux is missing. Unresolved symbol check will be entirely skipped.

vim +/wowlan_support +49 drivers/net/wireless/microchip/wilc1000/cfg80211.c

15162fbc78a74a drivers/staging/wilc1000/wilc_wfi_cfgoperations.c Arnd Bergmann 2015-11-16 48

73584a40d7484f drivers/staging/wilc1000/wilc_wfi_cfgoperations.c Glen Lee      2016-01-25 @49  static const struct wiphy_wowlan_support wowlan_support = {
73584a40d7484f drivers/staging/wilc1000/wilc_wfi_cfgoperations.c Glen Lee      2016-01-25  50  	.flags = WIPHY_WOWLAN_ANY
73584a40d7484f drivers/staging/wilc1000/wilc_wfi_cfgoperations.c Glen Lee      2016-01-25  51  };
73584a40d7484f drivers/staging/wilc1000/wilc_wfi_cfgoperations.c Glen Lee      2016-01-25  52  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#5 lore raw
In reply to [email protected]
Quoted 18 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

---

Quoted 8 lines

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3]. https://lore.kernel.org/linux-wireless/[email protected]/

As discussed with Greg I created an immutable branch for this and merged the branch to wireless-drivers-next:

5625f965d764 wilc1000: move wilc driver out of staging

Greg, here's the location of the immutable branch:

git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git wilc1000-move-out-of-staging

Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
maintainer
#6 lore raw
Quoted 29 lines · Kalle Valo
Quoted 18 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

---

Quoted 8 lines

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3]. https://lore.kernel.org/linux-wireless/[email protected]/

Quoted 8 lines

As discussed with Greg I created an immutable branch for this and merged the branch to wireless-drivers-next:

5625f965d764 wilc1000: move wilc driver out of staging

Greg, here's the location of the immutable branch:

git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git wilc1000-move-out-of-staging

Looks good, I've pulled it into my staging tree as well, but there's still a TODO file left in drivers/staging/wilc1000, right?

I'll just add a patch to my tree to remove that last file.

thanks,

greg k-h

author maintainer
#7 lore raw
Quoted 37 lines · Greg KH

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 34 lines · Kalle Valo
Quoted 18 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

---

Quoted 8 lines

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3]. https://lore.kernel.org/linux-wireless/[email protected]/

As discussed with Greg I created an immutable branch for this and merged the branch to wireless-drivers-next:

5625f965d764 wilc1000: move wilc driver out of staging

Quoted 9 lines
Quoted 3 lines

Greg, here's the location of the immutable branch:

git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git wilc1000-move-out-of-staging

Looks good, I've pulled it into my staging tree as well, but there's still a TODO file left in drivers/staging/wilc1000, right?

I'll just add a patch to my tree to remove that last file.

Yes, TODO file needs to be removed after the driver movement. Thanks Greg for all your support to move driver out of staging.

Regards,
Ajay

maintainer
#8 lore raw
Quoted 44 lines · On Thu, Jul 02, 2020 at 07:24:34AM +0000, [email protected] wrote:
Quoted 41 lines · Greg KH

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 37 lines · Kalle Valo
Quoted 18 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

---

Quoted 8 lines

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3]. https://lore.kernel.org/linux-wireless/[email protected]/

As discussed with Greg I created an immutable branch for this and merged the branch to wireless-drivers-next:

5625f965d764 wilc1000: move wilc driver out of staging

Greg, here's the location of the immutable branch:

git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git wilc1000-move-out-of-staging

Quoted 7 lines
Quoted 5 lines

Looks good, I've pulled it into my staging tree as well, but there's still a TODO file left in drivers/staging/wilc1000, right?

I'll just add a patch to my tree to remove that last file.

Yes, TODO file needs to be removed after the driver movement.

Now gone from my tree.

Quoted 1 line

Thanks Greg for all your support to move driver out of staging.

Glad to see it move out, thanks to you all for all of your work!

greg k-h

author maintainer
#9 lore raw
In reply to Kalle Valo
Quoted 25 lines · Kalle Valo

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 21 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/[email protected]/
[2]. https://lore.kernel.org/linux-wireless/[email protected]/

---

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Quoted 8 lines
Quoted 5 lines

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3]. https://lore.kernel.org/linux-wireless/[email protected]/

As discussed with Greg I created an immutable branch for this and merged the branch to wireless-drivers-next:

Thanks Kalle.

If my understanding is correct, we have to use 'wireless-driver-next' master branch to submit new patches for wilc1000. right?

Quoted 10 lines

5625f965d764 wilc1000: move wilc driver out of staging

Greg, here's the location of the immutable branch:

git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git wilc1000-move-out-of-staging

--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

#10 lore raw
Quoted 36 lines · <[email protected]> writes:
Quoted 35 lines · Kalle Valo

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 29 lines · <[email protected]> writes:

From: Ajay Singh <[email protected]>

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2.

[1].
https://lore.kernel.org/linux-wireless/[email protected]/
[2].
https://lore.kernel.org/linux-wireless/[email protected]/

---

As suggested, keeping all the changes in single commit with file rename so it's easy to move out of staging [3].

Please choose whichever option you prefer between the git mv or patch series sent last Tuesday. The resulting driver is the same as no patch has been queued in between.

[3].
https://lore.kernel.org/linux-wireless/[email protected]/

Quoted 7 lines
Quoted 2 lines

As discussed with Greg I created an immutable branch for this and merged the branch to wireless-drivers-next:

Thanks Kalle.

If my understanding is correct, we have to use 'wireless-driver-next' master branch to submit new patches for wilc1000. right?

Correct. And I also suggest to get familiar with the linux-wireless patchwork to follow patch status, more info in the link below.

Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches