configs/freescale_mpc8315erdb: remove defconfig
PATCH 1/1 configs/freescale_mpc8315erdb: remove defconfig
This defconfig currently fails to build the Linux kernel:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826
In addition, the U-Boot build had already been removed in commit 12c01e4a05c8e4f4e0c4e8b74fac7824efdc8b41 ("configs/freescale_mpc8315erdb: remove U-Boot build"), back in October 2016, and nobody bothered fixing it.
This defconfig was originally contributed and maintained by Gustavo Zacarias, but he is no longer active in Buildroot, and nobody expressed interest in this defconfig, so let's get rid of it.
--- .gitlab-ci.yml | 1 - board/freescale/mpc8315erdb/linux-4.5.config | 70 ---------------------------- board/freescale/mpc8315erdb/readme.txt | 40 ---------------- configs/freescale_mpc8315erdb_defconfig | 28 ----------- 4 files changed, 139 deletions(-) delete mode 100644 board/freescale/mpc8315erdb/linux-4.5.config delete mode 100644 board/freescale/mpc8315erdb/readme.txt delete mode 100644 configs/freescale_mpc8315erdb_defconfig
.gitlab-ci.yml +0 -1
@@ -122,7 +122,6 @@ freescale_imx6sololiteevk_defconfig: *defconfig freescale_imx6sxsabresd_defconfig: *defconfig freescale_imx6ulevk_defconfig: *defconfig freescale_imx7dsabresd_defconfig: *defconfig -freescale_mpc8315erdb_defconfig: *defconfig freescale_p1010rdb_pa_defconfig: *defconfig friendlyarm_nanopi_a64_defconfig: *defconfig friendlyarm_nanopi_neo2_defconfig: *defconfig
board/freescale/mpc8315erdb/linux-4.5.config deleted +0 -70
70 lines not on this page · raw message
board/freescale/mpc8315erdb/readme.txt deleted +0 -40
@@ -1,40 +0,0 @@ -You'll need to program the files created by buildroot into the flash. -The fast way is to tftp transfer the files via one of the network interfaces. - -Alternatively you can transfer the files via serial console with an Ymodem -file transfer from your terminal program by using a "loady" command -from the u-boot prompt instead of the "tftp ..." commands stated below. -Beware that serial console file transfers are quite slow! - -1. Program the kernel to NAND flash - - => tftp $loadaddr uImage - => nand erase 0x100000 0x1e0000 - => nand write $loadaddr 0x100000 0x1e0000 - -2. Program the DTB to NAND flash - - => tftp $loadaddr mpc8315erdb.dtb - => nand erase 0x2e0000 0x20000 - => nand write $loadaddr 0x2e0000 0x20000 - -3. Program the root filesystem to NAND flash - - => tftp $loadaddr rootfs.jffs2 - => nand erase 0x400000 0x1c00000 - => nand write $loadaddr 0x400000 $filesize - -4. Booting your new system - - => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr' - - If you want to set this boot option as default: - - => setenv bootcmd 'run nandboot' - => saveenv - - ...or for a single boot: - - => run nandboot - - You can login with user "root".
configs/freescale_mpc8315erdb_defconfig deleted +0 -28
@@ -1,28 +0,0 @@ -# Architecture -BR2_powerpc=y -BR2_powerpc_e300c3=y - -# Filesystem -# BR2_TARGET_ROOTFS_TAR is not set -BR2_TARGET_ROOTFS_JFFS2=y -BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y -BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x200 -BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x4000 -BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y - -# Linux headers same as kernel, a 4.5 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y - -# Kernel -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3" -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-4.5.config" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="mpc8315erdb" - -# Serial port config -BR2_TARGET_GENERIC_GETTY=y -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
Signature · 1 line
2.14.3
PATCH 1/1 configs/freescale_mpc8315erdb: remove defconfig
Quoted 10 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
This defconfig currently fails to build the Linux kernel:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826In addition, the U-Boot build had already been removed in commit
12c01e4a05c8e4f4e0c4e8b74fac7824efdc8b41("configs/freescale_mpc8315erdb: remove U-Boot build"), back in October 2016, and nobody bothered fixing it.
Quoted 5 lines
This defconfig was originally contributed and maintained by Gustavo Zacarias, but he is no longer active in Buildroot, and nobody expressed interest in this defconfig, so let's get rid of it.
Signed-off-by Thomas Petazzoni <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 configs/freescale_mpc8315erdb: remove defconfig
In reply to Thomas PetazzoniQuoted 10 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
This defconfig currently fails to build the Linux kernel:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826In addition, the U-Boot build had already been removed in commit
12c01e4a05c8e4f4e0c4e8b74fac7824efdc8b41("configs/freescale_mpc8315erdb: remove U-Boot build"), back in October 2016, and nobody bothered fixing it.
Quoted 5 lines
This defconfig was originally contributed and maintained by Gustavo Zacarias, but he is no longer active in Buildroot, and nobody expressed interest in this defconfig, so let's get rid of it.
Signed-off-by Thomas Petazzoni <[email protected]>
Committed to 2018.02.x, thanks.
Signature · 1 line
Bye, Peter Korsgaard