ARM: dts: armada-38x: Add NAND RB pinctrl information
PATCH 1/1 ARM: dts: armada-38x: Add NAND RB pinctrl information
Add pin control information for the NAND flash interface.
Signed-off-by Sean Nyekjaer <[email protected]>
--- arch/arm/boot/dts/armada-38x.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/armada-38x.dtsi +5 -0
@@ -279,6 +279,11 @@ marvell,function = "dev"; }; + nand_rb: nand-rb { + marvell,pins = "mpp41"; + marvell,function = "nand"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0";
Signature · 1 line
2.15.0
PATCH 1/1 ARM: dts: armada-38x: Add NAND RB pinctrl information
Hi Sean,
Quoted 3 lines · Sean Nyekjaer
Add pin control information for the NAND flash interface.
Signed-off-by Sean Nyekjaer <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 23 lines
--- arch/arm/boot/dts/armada-38x.dtsi | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/boot/dts/armada-38x.dtsi +5
-0@@ -279,6 +279,11 @@ marvell,function = "dev"; }; + nand_rb: nand-rb { + marvell,pins = "mpp41"; + marvell,function = "nand"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0";Signature · 1 line
2.15.0
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com