Add support for the Cortex-A8 processor
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 Add support for the Cortex-A8 processor
These patches add support for the Cortex-A8 processor used in the Beagleboard among others.
---
Laine Walker-Avina
Firmware Engineer
PASCO scientific
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-support-for-the-Cortex-A8-ARM-target.patch
Type: text/x-patch
Size: 1542 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20091117/1e97c0b4/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-GCC-Add-4.4.2-as-the-active-4.4.x-version.patch
Type: text/x-patch
Size: 7491 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20091117/1e97c0b4/attachment-0003.bin>
PATCH 1/1 Add support for the Cortex-A8 processor
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Laine" == Laine Walker-Avina <[email protected]> writes:
Laine> These patches add support for the Cortex-A8 processor used in the Laine> Beagleboard among others.
Thanks, see below for a few comments.
Laine> ---
Laine> Laine Walker-Avina
Laine> Firmware Engineer
Laine> PASCO scientific
Laine> From e317f275af94696ba680524120147e5618ccf213 Mon Sep 17 00:00:00 2001 Laine> From: Laine Walker-Avina <[email protected]>
Laine> Date: Thu, 29 Oct 2009 10:30:50 -0700
Laine> Subject: [PATCH] Add support for the Cortex-A8 ARM target
Laine> +config BR2_cortex_a8
Laine> + bool "Cortex-A8"
Laine> config BR2_sa110 Laine> bool "sa110" Laine> config BR2_sa1100 Laine> @@ -112,6 +114,7 @@ config BR2_ARM_TYPE Laine> default ARM_SA1100 if BR2_sa1100 Laine> default ARM_XSCALE if BR2_xscale Laine> default ARM_IWMMXT if BR2_iwmmxt
Laine> + default ARM_CORTEXA8 if BR2_cortex_a8
Laine> choice
Laine> prompt "Target ABI"
Laine> @@ -591,6 +594,7 @@ config BR2_GCC_TARGET_TUNE
Laine> default arm1136jf-s if BR2_arm1136jf_s Laine> default arm1176jz-s if BR2_arm1176jz_s Laine> default arm1176jzf-s if BR2_arm1176jzf_s
Laine> + default cortex-a8 if BR2_cortex_a8
Indentation seems wrong, otherwise it's fine. From what gcc version is cortex A8 supported? We should probably make it depend on that minimal version as the build otherwise breaks?
Laine> default strongarm110 if BR2_sa110
Laine> From 709c9a9140b377112a6721155e2a70bbaa893121 Mon Sep 17 00:00:00 2001 Laine> From: Laine Walker-Avina <[email protected]>
Laine> Date: Thu, 5 Nov 2009 14:27:45 -0800
Laine> Subject: [PATCH] GCC: Add 4.4.2 as the active 4.4.x version
We already have 4.4.2 support in BR.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 Add support for the Cortex-A8 processor
Quoted 37 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Laine" == Laine Walker-Avina <[email protected]> writes:
?Laine> These patches add support for the Cortex-A8 processor used in the ?Laine> Beagleboard among others.
Thanks, see below for a few comments.
?Laine> ---
?Laine> Laine Walker-Avina
?Laine> Firmware Engineer
?Laine> PASCO scientific?Laine> From
e317f275af94696ba680524120147e5618ccf213Mon Sep 17 00:00:00 2001 ?Laine> From: Laine Walker-Avina <[email protected]>
?Laine> Date: Thu, 29 Oct 2009 10:30:50 -0700
?Laine> Subject: [PATCH] Add support for the Cortex-A8 ARM target?Laine> +config
BR2_cortex_a8
?Laine> + ? ? ? bool "Cortex-A8"
?Laine> ?configBR2_sa110
?Laine> ? ? ? ? bool "sa110"
?Laine> ?configBR2_sa1100
?Laine> @@ -112,6 +114,7 @@ configBR2_ARM_TYPE?Laine> ? ? ? ? defaultARM_SA1100? ? ?ifBR2_sa1100?Laine> ? ? ? ? defaultARM_XSCALE? ? ?ifBR2_xscale?Laine> ? ? ? ? defaultARM_IWMMXT? ? ?ifBR2_iwmmxt?Laine> + ? ? ? defaultARM_CORTEXA8ifBR2_cortex_a8?Laine> ?choice
?Laine> ? ? ? ? prompt "Target ABI"
?Laine> @@ -591,6 +594,7 @@ configBR2_GCC_TARGET_TUNE?Laine> ? ? ? ? default arm1136jf-s ? ? ifBR2_arm1136jf_s?Laine> ? ? ? ? default arm1176jz-s ? ? ifBR2_arm1176jz_s?Laine> ? ? ? ? default arm1176jzf-s ? ?ifBR2_arm1176jzf_s?Laine> + ? ? ? default cortex-a8 ? ? ? ? ? ? ? ifBR2_cortex_a8
Quoted 3 lines
Indentation seems wrong, otherwise it's fine. From what gcc version is cortex A8 supported? We should probably make it depend on that minimal version as the build otherwise breaks?
Gcc 4.4.1 added support for armv7-a, but there was a bug for c++ exceptions that made libstdc++ non-PIC which was fixed in 4.4.2. So 4.4.2 and later would probably be a good bet.
Quoted 9 lines
?Laine> ? ? ? ? default strongarm110 ? ?if
BR2_sa110?Laine> From
709c9a9140b377112a6721155e2a70bbaa893121Mon Sep 17 00:00:00 2001 ?Laine> From: Laine Walker-Avina <[email protected]>
?Laine> Date: Thu, 5 Nov 2009 14:27:45 -0800
?Laine> Subject: [PATCH] GCC: Add 4.4.2 as the active 4.4.x versionWe already have 4.4.2 support in BR.
Good to know.
Quoted 4 lines
--
Bye, Peter Korsgaard
PATCH 1/1 Add support for the Cortex-A8 processor
In reply to Laine Walker-AvinaQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Laine" == Laine Walker-Avina <[email protected]> writes:
Laine> These patches add support for the Cortex-A8 processor used in the Laine> Beagleboard among others.
Patch 1 applied with minor tweaks - Thanks!
Signature · 1 line
Bye, Peter Korsgaard