2.6.0-test6-bk7: kernel freeze if try to change to console
Folks,
I'm using kernel 2.6.0-test6-bk7 and have some problems. If I try to change to console from X my system freeze. I'm including my .config file bellow.
Thanks in Advance,
Otavio
Signature · 7 lines
--
O T A V I O S A L V A D O R
---------------------------------------------
E-mail: [email protected] UIN: 5906116
GNU/Linux User: 239058 GPG ID: 49A5F855
Home Page: http://www.freedom.ind.br/otavio
---------------------------------------------Quoted 5 lines · Otavio Salvador
Folks,
I'm using kernel 2.6.0-test6-bk7 and have some problems. If I try to change to console from X my system freeze. I'm including my .config file bellow.
I have a hunch but I need to see your boot dmesg log to confirm. Please post it.
/Mikael
Quoted 9 lines · Mikael Pettersson
Quoted 5 lines · Otavio Salvador
Folks,
I'm using kernel 2.6.0-test6-bk7 and have some problems. If I try to change to console from X my system freeze. I'm including my .config file bellow.
I have a hunch but I need to see your boot dmesg log to confirm. Please post it.
Hello,
Here is it.
Linux version 2.6.0-test6-bk7 ([email protected]) (gcc version 3.3.2 20030908 (Debian prerelease)) #1 Mon Oct 6 00:32:00 BRT 2003 Video mode to be used for restore is 31a
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001efec000 (usable)
BIOS-e820: 000000001efec000 - 000000001efef000 (ACPI data)
BIOS-e820: 000000001efef000 - 000000001efff000 (reserved)
BIOS-e820: 000000001efff000 - 000000001f000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
495MB LOWMEM available.
On node 0 totalpages: 126956
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 122860 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Building zonelist for node : 0
Kernel command line: root=/dev/hda5 vga=794
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1603.692 MHz processor.
Console: colour dummy device 80x25
Memory: 498876k/507824k available (1958k kernel code, 8056k reserved, 558k data, 332k init, 0k highmem) Calibrating delay loop... 3170.30 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 CPU: AMD Athlon(TM) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1a70, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [10de/01b2] at 0000:00:01.0
vesafb: framebuffer at 0xe8000000, mapped to 0xdf800000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:bf60
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
udf: registering filesystem
Initializing Cryptographic API
Console: switching to colour frame buffer device 160x64
pty: 256 Unix98 ptys configured
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce chipset
agpgart: Maximum main memory to use for agp memory: 424M
agpgart: AGP aperture is 128M @ 0xf0000000
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xc800, IRQ 5, 52:54:00:E9:5D:02. 8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 at 0xe0856000, 00:e0:7d:a9:dd:44, IRQ 5
eth1: Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE: IDE controller at PCI slot 0000:00:09.0
NFORCE: chipset revision 195
NFORCE: not 100% native mode: will probe irqs laterAMD_IDE: Bios didn't set cable bits correctly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxAMD_IDE: 0000:00:09.0 (rev c3) UDMA100 controller on pci0000:00:09.0
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:DMAhda: MAXTOR 6L040J2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 >end_request: I/O error, dev hdd, sector 0
hdd: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Console: switching to colour frame buffer device 160x64
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
device-mapper: 4.0.0-ioctl (2003-06-04) initialised: [email protected]
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0: clocking to 47419
ALSA device list:
#0: NVidia nForce at 0xe5800000, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)ip_conntrack version 2.1 (3967 buckets, 31736 max) - 300 bytes per conntrackip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda5) for (hda5)
reiserfs: replayed 13 transactions in 1 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 332k freed
Adding 530104k swap on /dev/hda6. Priority:-1 extents:1
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda1) for (hda1)
Using r5 hash to sort names
Removing [2 30 0x0 SD]..done
There were 1 uncompleted unlinks/truncates. Completed
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (dm-1) for (dm-1)
reiserfs: replayed 1 transactions in 0 seconds
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (dm-4) for (dm-4)
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (dm-2) for (dm-2)
reiserfs: replayed 11 transactions in 0 seconds
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (dm-3) for (dm-3)
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (dm-0) for (dm-0)
reiserfs: replayed 63 transactions in 0 seconds
Using r5 hash to sort names
eth1: link down
blk: queue c1515e00, I/O limit 4095Mb (mask 0xffffffff)
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
Thanks,
Otavio
Signature · 6 lines
O T A V I O S A L V A D O R --------------------------------------------- E-mail: [email protected] UIN: 5906116 GNU/Linux User: 239058 GPG ID: 49A5F855 Home Page: http://www.freedom.ind.br/otavio ---------------------------------------------
Quoted 9 lines · Otavio Salvador
Quoted 7 lines · Mikael Pettersson
Quoted 5 lines · Otavio Salvador
Folks,
I'm using kernel 2.6.0-test6-bk7 and have some problems. If I try to change to console from X my system freeze. I'm including my .config file bellow.
Quoted 6 lines
Quoted 2 lines
I have a hunch but I need to see your boot dmesg log to confirm. Please post it.
Hello,
Here is it.
Ok now I'm confused. The .config you posted earlier stated that you had both UP_APIC and APM_DISPLAY_BLANK enabled. Your dmesg log indicates that you're running on a 1.6GHz Athlon-XP, but there's no mention of APIC anything in the dmesg log.
So either your Athlon has had its local APIC disabled, or you changed the .config to exclude UP_APIC.
In any case, APM_DISPLAY_BLANK is known to sometimes lock up when it blanks the console (e.g., when X exists). This is because some graphics card BIOSen can't handle local APIC interrupts (e.g., the timer). The workaround is to disable either APM_DISPLAY_BLANK or UP_APIC.
/Mikael
Quoted 13 lines · Mikael Pettersson
Quoted 12 lines · Otavio Salvador
Quoted 9 lines · Mikael Pettersson
Quoted 5 lines · Otavio Salvador
Folks,
I'm using kernel 2.6.0-test6-bk7 and have some problems. If I try to change to console from X my system freeze. I'm including my .config file bellow.
I have a hunch but I need to see your boot dmesg log to confirm. Please post it.
Quoted 8 lines
Quoted 3 lines
Hello,
Here is it.
Ok now I'm confused. The .config you posted earlier stated that you had both
UP_APICandAPM_DISPLAY_BLANKenabled. Your dmesg log indicates that you're running on a 1.6GHz Athlon-XP, but there's no mention of APIC anything in the dmesg log.
Yes. Was my last try to solve the problem removing the APIC and solves.
Quoted 7 lines
So either your Athlon has had its local APIC disabled, or you changed the .config to exclude
UP_APIC.In any case,
APM_DISPLAY_BLANKis known to sometimes lock up when it blanks the console (e.g., when X exists). This is because some graphics card BIOSen can't handle local APIC interrupts (e.g., the timer). The workaround is to disable eitherAPM_DISPLAY_BLANKorUP_APIC.
Now is working nicely. I've disabled APIC and all working fine now.
Thanks by your help.
Signature · 6 lines
O T A V I O S A L V A D O R --------------------------------------------- E-mail: [email protected] UIN: 5906116 GNU/Linux User: 239058 GPG ID: 49A5F855 Home Page: http://www.freedom.ind.br/otavio ---------------------------------------------