remove the fat_cvf

diff -urN linux-2.5.20/Documentation/filesystems/fat_cvf.txt fat-remove_cvf/Documentation/filesystems/fat_cvf.txt
@@ -1,210 +0,0 @@
-This is the main documentation for the CVF-FAT filesystem extension.  18Nov1998
-
-
-Table of Contents:
-
-1. The idea of CVF-FAT
-2. Restrictions
-3. Mount options
-4. Description of the CVF-FAT interface
-5. CVF Modules
-
-------------------------------------------------------------------------------
-
-
-1. The idea of CVF-FAT
-------------------------------------------------------------------------------
-
-CVF-FAT is a FAT filesystem extension that provides a generic interface for
-Compressed Volume Files in FAT partitions. Popular CVF software, for
-example, are Microsoft's Doublespace/Drivespace and Stac's Stacker.
-Using the CVF-FAT interface, it is possible to load a module that handles
-all the low-level disk access that has to do with on-the-fly compression
-and decompression. Any other part of FAT filesystem access is still handled
-by the FAT, MSDOS or VFAT or even UMSDOS driver.
-
-CVF access works by redirecting certain low-level routines from the FAT
-driver to a loadable, CVF-format specific module. This module must fake
-a normal FAT filesystem to the FAT driver while doing all the extra stuff
-like compression and decompression silently.
-
-
-2. Restrictions
-------------------------------------------------------------------------------
-
-- BMAP problems
-
-  CVF filesystems cannot do bmap. It's impossible in principle. Thus
-  all actions that require bmap do not work (swapping, writable mmapping).
-  Read-only mmapping works because the FAT driver has a hack for this
-  situation :) Well, writable mmapping should now work using the readpage
-  interface function which has been hacked into the FAT driver just for 
-  CVF-FAT :)
-  
-- attention, DOSEmu users 
-
-  You may have to unmount all CVF partitions before running DOSEmu depending 
-  on your configuration. If DOSEmu is configured to use wholedisk or 
-  partition access (this is often the case to let DOSEmu access 
-  compressed partitions) there's a risk of destroying your compressed 
-  partitions or crashing your system because of confused drivers.
-  
-  Note that it is always safe to redirect the compressed partitions with 
-  lredir or emufs.sys. Refer to the DOSEmu documentation for details.
-
-
-3. Mount options
-------------------------------------------------------------------------------
-
-The CVF-FAT extension currently adds the following options to the FAT
-driver's standard options:
-
-  cvf_format=xxx
-    Forces the driver to use the CVF module "xxx" instead of auto-detection.
-    Without this option, the CVF-FAT interface asks all currently loaded
-    CVF modules whether they recognize the CVF. Therefore, this option is
-    only necessary if the CVF format is not recognized correctly
-    because of bugs or incompatibilities in the CVF modules. (It skips
-    the detect_cvf call.) "xxx" may be the text "none" (without the quotes)
-    to inhibit using any of the loaded CVF modules, just in case a CVF
-    module insists on mounting plain FAT filesystems by misunderstanding.
-    "xxx" may also be the text "autoload", which has a special meaning for
-    a module loader, but does not skip auto-detection.
-
-    If the kernel supports kmod, the cvf_format=xxx option also controls
-    on-demand CVF module loading. Without this option, nothing is loaded
-    on demand. With cvf_format=xxx, a module "xxx" is requested automatically
-    before mounting the compressed filesystem (unless "xxx" is "none"). In 
-    case there is a difference between the CVF format name and the module 
-    name, setup aliases in your modules configuration. If the string "xxx" 
-    is "autoload", a non-existent module "cvf_autoload" is requested which 
-    can be used together with a special modules configuration (alias and 
-    pre-install statements) in order to load more than one CVF module, let 
-    them detect automatically which kind of CVF is to be mounted, and only 
-    keep the "right" module in memory. For examples please refer to the 
-    dmsdos documentation (ftp and http addresses see below).
-
-  cvf_options=yyy
-    Option string passed to the CVF module. I.e. only the "yyy" is passed
-    (without the quotes). The documentation for each CVF module should 
-    explain it since it is interpreted only by the CVF module. Note that 
-    the string must not contain a comma (",") - this would lead to 
-    misinterpretation by the FAT driver, which would recognize the text 
-    after a comma as a FAT driver option and might get confused or print 
-    strange error messages. The documentation for the CVF module should 
-    offer a different separation symbol, for example the dot "." or the
-    plus sign "+", which is only valid inside the string "yyy".
-
-
-4. Description of the CVF-FAT interface
-------------------------------------------------------------------------------
-
-Assuming you want to write your own CVF module, you need to write a lot of
-interface functions. Most of them are covered in the kernel documentation
-you can find on the net, and thus won't be described here. They have been
-marked with "[...]" :-) Take a look at include/linux/fat_cvf.h.
-
-struct cvf_format
-{ int cvf_version;
-  char* cvf_version_text;
-  unsigned long int flags;
-  int (*detect_cvf) (struct super_block*sb);
-  int (*mount_cvf) (struct super_block*sb,char*options);
-  int (*unmount_cvf) (struct super_block*sb);
-  [...]
-  void (*zero_out_cluster) (struct inode*, int clusternr);
-}
-
-This structure defines the capabilities of a CVF module. It must be filled
-out completely by a CVF module. Consider it as a kind of form that is used
-to introduce the module to the FAT/CVF-FAT driver.
-
-It contains...
-  - cvf_version:
-      A version id which must be unique. Choose one.
-  - cvf_version_text:
-      A human readable version string that should be one short word 
-      describing the CVF format the module implements. This text is used
-      for the cvf_format option. This name must also be unique.
-  - flags:
-      Bit coded flags, currently only used for a readpage/mmap hack that 
-      provides both mmap and readpage functionality. If CVF_USE_READPAGE
-      is set, mmap is set to generic_file_mmap and readpage is caught
-      and redirected to the cvf_readpage function. If it is not set,
-      readpage is set to generic_readpage and mmap is caught and redirected
-      to cvf_mmap. (If you want writable mmap use the readpage interface.)
-  - detect_cvf:
-      A function that is called to decide whether the filesystem is a CVF of
-      the type the module supports. The detect_cvf function must return 0
-      for "NO, I DON'T KNOW THIS GARBAGE" or anything >0 for "YES, THIS IS
-      THE KIND OF CVF I SUPPORT". The function must maintain the module
-      usage counters for safety, i.e. do MOD_INC_USE_COUNT at the beginning
-      and MOD_DEC_USE_COUNT at the end. The function *must not* assume that
-      successful recognition would lead to a call of the mount_cvf function
-      later. 
-  - mount_cvf:
-      A function that sets up some values or initializes something additional
-      to what has to be done when a CVF is mounted. This is called at the
-      end of fat_read_super and must return 0 on success. Definitely, this
-      function must increment the module usage counter by MOD_INC_USE_COUNT.
-      This mount_cvf function is also responsible for interpreting a CVF
-      module specific option string (the "yyy" from the FAT mount option
-      "cvf_options=yyy") which cannot contain a comma (use for example the
-      dot "." as option separator symbol).
-  - unmount_cvf:
-      A function that is called when the filesystem is unmounted. Most likely
-      it only frees up some memory and calls MOD_DEC_USE_COUNT. The return
-      value might be ignored (it currently is ignored).
-  - [...]:
-      All other interface functions are "caught" FAT driver functions, i.e.
-      are executed by the FAT driver *instead* of the original FAT driver
-      functions. NULL means use the original FAT driver functions instead.
-      If you really want "no action", write a function that does nothing and 
-      hang it in instead.
-  - zero_out_cluster:
-      The zero_out_cluster function is called when the fat driver wants to
-      zero out a (new) cluster. This is important for directories (mkdir).
-      If it is NULL, the FAT driver defaults to overwriting the whole
-      cluster with zeros. Note that clusternr is absolute, not relative
-      to the provided inode.
-
-Notes:
-  1. The cvf_bmap function should be ignored. It really should never
-     get called from somewhere. I recommend redirecting it to a panic
-     or fatal error message so bugs show up immediately.
-  2. The cvf_writepage function is ignored. This is because the fat
-     driver doesn't support it. This might change in future. I recommend
-     setting it to NULL (i.e use default).
-
-int register_cvf_format(struct cvf_format*cvf_format);
-  If you have just set up a variable containing the above structure,
-  call this function to introduce your CVF format to the FAT/CVF-FAT
-  driver. This is usually done in init_module. Be sure to check the
-  return value. Zero means success, everything else causes a kernel
-  message printed in the syslog describing the error that occurred.
-  Typical errors are:
-    - a module with the same version id is already registered or 
-    - too many CVF formats. Hack fs/fat/cvf.c if you need more.
-
-int unregister_cvf_format(struct cvf_format*cvf_format);
-  This is usually called in cleanup_module. Return value =0 means
-  success. An error only occurs if you try to unregister a CVF format
-  that has not been previously registered. The code uses the version id
-  to distinguish the modules, so be sure to keep it unique.
-
-5. CVF Modules
-------------------------------------------------------------------------------
-
-Refer to the dmsdos module (the successor of the dmsdos filesystem) for a
-sample implementation.  It can currently be found at
-
-  ftp://fb9nt.uni-duisburg.de/pub/linux/dmsdos/dmsdos-x.y.z.tgz
-  ftp://sunsite.unc.edu/pub/Linux/system/Filesystems/dosfs/dmsdos-x.y.z.tgz
-  ftp://ftp.uni-stuttgart.de/pub/systems/linux/local/system/dmsdos-x.y.z.tgz
-
-(where x.y.z is to be replaced with the actual version number). Full
-documentation about dmsdos is included in the dmsdos package, but can also
-be found at
-
-  http://fb9nt.uni-duisburg.de/mitarbeiter/gockel/software/dmsdos/index.html
-  http://www.yk.rim.or.jp/~takafumi/dmsdos/index.html (in Japanese).

diff -urN linux-2.5.20/fs/fat/Makefile fat-remove_cvf/fs/fat/Makefile
@@ -6,6 +6,6 @@
 
 obj-$(CONFIG_FAT_FS) += fat.o
 
-fat-objs := buffer.o cache.o dir.o file.o inode.o misc.o cvf.o fatfs_syms.o
+fat-objs := buffer.o cache.o dir.o file.o inode.o misc.o fatfs_syms.o
 
 include $(TOPDIR)/Rules.make