Skip to contentSkip to conversation

sh: Implement __get_user_u64() required for 64-bit get_user()

PATCH In review John Paul Adrian Glaubitz 2 participants 5 messages Jun 11, 2020 – Jun 27, 2020 SuperH

lore
Share & tools
lore

John Paul Adrian Glaubitz

author maintainer
#0 lore raw

PATCH v3 1/1 sh: Implement __get_user_u64() required for 64-bit get_user()

Hi!

This is version 3 of my patch to implement __get_user_u64() for SH.

I have asked both Yutaka Niibe and Yoshinori Sato to look over my changes and they both agreed that an entry in __ex_tables for the second access was missing, so I add the missing ".long 1b+2, 3b\n\t".

The changes should be correct now and will hopefully get a positive review by the SH maintainers.

Thanks,
Adrian

--

 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - [email protected]
`. `'   Freie Universitaet Berlin - [email protected]
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913
author maintainer
#1 lore raw

PATCH 1/1 sh: Implement __get_user_u64() required for 64-bit get_user()

Trying to build the kernel with CONFIG_INFINIBAND_USER_ACCESS enabled fails

ERROR: "__get_user_unknown" [drivers/infiniband/core/ib_uverbs.ko] undefined!

with on SH since the kernel misses a 64-bit implementation of get_user().

Implement the missing 64-bit get_user() as __get_user_u64(), matching the already existing __put_user_u64() which implements the 64-bit put_user().

---
 arch/sh/include/asm/uaccess_32.h | 53 ++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
arch/sh/include/asm/uaccess_32.h +53 -0
index 624cf55acc27..5d7ddc092afd 100644
@@ -26,6 +26,9 @@ do {								\
 	case 4:							\
 		__get_user_asm(x, ptr, retval, "l");		\
 		break;						\
+	case 8:							\
+		__get_user_u64(x, ptr, retval);			\
+		break;						\
 	default:						\
 		__get_user_unknown();				\
 		break;						\
@@ -66,6 +69,56 @@ do {							\
 
 extern void __get_user_unknown(void);
 
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __get_user_u64(x, addr, err) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%2,%R1\n\t" \
+	"mov.l	%T2,%S1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov  #0,%R1\n\t"   \
+	"mov  #0,%S1\n\t"   \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".long	1b + 2, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_u64(x, addr, err) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%2,%S1\n\t" \
+	"mov.l	%T2,%R1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov  #0,%S1\n\t"   \
+	"mov  #0,%R1\n\t"   \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".long	1b + 2, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#endif
+
 #define __put_user_size(x,ptr,size,retval)		\
 do {							\
 	retval = 0;					\
Signature · 1 line
2.27.0
maintainer Acked-by on v1 1/1
#2 lore raw
Quoted 89 lines · John Paul Adrian Glaubitz

Trying to build the kernel with CONFIG_INFINIBAND_USER_ACCESS enabled fails

ERROR: "__get_user_unknown" [drivers/infiniband/core/ib_uverbs.ko] undefined!

with on SH since the kernel misses a 64-bit implementation of get_user().

Implement the missing 64-bit get_user() as __get_user_u64(), matching the already existing __put_user_u64() which implements the 64-bit put_user().

---
 arch/sh/include/asm/uaccess_32.h | 53 ++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
arch/sh/include/asm/uaccess_32.h +53 -0
index 624cf55acc27..5d7ddc092afd 100644
@@ -26,6 +26,9 @@ do {								\
 	case 4:							\
 		__get_user_asm(x, ptr, retval, "l");		\
 		break;						\
+	case 8:							\
+		__get_user_u64(x, ptr, retval);			\
+		break;						\
 	default:						\
 		__get_user_unknown();				\
 		break;						\
@@ -66,6 +69,56 @@ do {							\
 
 extern void __get_user_unknown(void);
 
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __get_user_u64(x, addr, err) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%2,%R1\n\t" \
+	"mov.l	%T2,%S1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov  #0,%R1\n\t"   \
+	"mov  #0,%S1\n\t"   \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".long	1b + 2, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_u64(x, addr, err) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%2,%S1\n\t" \
+	"mov.l	%T2,%R1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov  #0,%S1\n\t"   \
+	"mov  #0,%R1\n\t"   \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".long	1b + 2, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#endif
+
 #define __put_user_size(x,ptr,size,retval)		\
 do {							\
 	retval = 0;					\
Signature · 1 line
2.27.0
Signature · 1 line
Yosinori Sato
author maintainer
#3 lore raw
In reply to John Paul Adrian Glaubitz
Quoted 8 lines · John Paul Adrian Glaubitz

This is version 3 of my patch to implement __get_user_u64() for SH.

I have asked both Yutaka Niibe and Yoshinori Sato to look over my changes and they both agreed that an entry in __ex_tables for the second access was missing, so I add the missing ".long 1b+2, 3b\n\t".

The changes should be correct now and will hopefully get a positive review by the SH maintainers.

Ping.

@Rich, @Yoshinori, @Yutaka, @Michael could I get a review if you have some time?

Adrian

Signature · 4 lines
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - [email protected]
`. `'   Freie Universitaet Berlin - [email protected]
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913
author maintainer
#4 lore raw

Hello!

Quoted 6 lines · John Paul Adrian Glaubitz
Quoted 2 lines

The changes should be correct now and will hopefully get a positive review by the SH maintainers.

Ping.

@Rich, @Yoshinori, @Yutaka, @Michael could I get a review if you have some time?

Can we please move forward with this? I don't want to see another discussion arise whether SH is maintained or not :-(.

Adrian

Signature · 4 lines
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - [email protected]
`. `'   Freie Universitaet Berlin - [email protected]
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913