configs/stm32mp157_dk: new defconfig
PATCH v3 1/1 configs/stm32mp157_dk: new defconfig
This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals.
This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added.
A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running.
The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future.
---
Changes since v2:
- Bump vendor Linux and U-Boot versions
- Use the $(call github,...) macro also to download U-Boot as a tarball
- Drop all other patches that have been merged
Peter: if you remember from the hackathon, this defconfig was not booting properly. Turned out I rebased on master, but *before* the point you merged the U-Boot change to support "custom build variables". Due to this the DEVICE_TREE=stm32mp157c-dk2 directive from BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS was not taken into account, causing the incorrect DT to be used in the U-Boot build. Properly rebased on the latest master, the defconfig works just fine!
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 + .../stm32mp157-dk/genimage.cfg | 24 +++ .../stm32mp157-dk/linux.config | 182 ++++++++++++++++++ .../overlay/boot/extlinux/extlinux.conf | 4 + .../stm32mp157-dk/readme.txt | 38 ++++ .../stm32mp157-dk/uboot-fragment.config | 1 + configs/stm32mp157_dk_defconfig | 30 +++ 8 files changed, 282 insertions(+) create mode 100644 board/stmicroelectronics/stm32mp157-dk/genimage.cfg create mode 100644 board/stmicroelectronics/stm32mp157-dk/linux.config create mode 100644 board/stmicroelectronics/stm32mp157-dk/overlay/boot/extlinux/extlinux.conf create mode 100644 board/stmicroelectronics/stm32mp157-dk/readme.txt create mode 100644 board/stmicroelectronics/stm32mp157-dk/uboot-fragment.config create mode 100644 configs/stm32mp157_dk_defconfig
.gitlab-ci.yml +1 -0
@@ -317,6 +317,7 @@ solidrun_macchiatobin_mainline_defconfig: { extends: .defconfig } solidrun_macchiatobin_marvell_defconfig: { extends: .defconfig } stm32f429_disco_defconfig: { extends: .defconfig } stm32f469_disco_defconfig: { extends: .defconfig } +stm32mp157_dk_defconfig: { extends: .defconfig } toradex_apalis_imx6_defconfig: { extends: .defconfig } ts4800_defconfig: { extends: .defconfig } ts4900_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2222,9 +2222,11 @@ F: package/ascii-invaders/ N: Thomas Petazzoni <[email protected]> F: arch/Config.in.arm +F: board/stmicroelectronics/stm32mp157-dk/ F: boot/boot-wrapper-aarch64/ F: boot/grub2/ F: boot/gummiboot/ +F: configs/stm32mp157_dk_defconfig F: package/android-tools/ F: package/b43-firmware/ F: package/b43-fwcutter/
board/stmicroelectronics/stm32mp157-dk/genimage.cfg new file +24 -0
@@ -0,0 +1,24 @@ +image sdcard.img { + hdimage { + gpt = "true" + } + + partition fsbl1 { + image = "u-boot-spl.stm32" + } + + partition fsbl2 { + image = "u-boot-spl.stm32" + } + + partition uboot { + image = "u-boot.img" + } + + partition rootfs { + image = "rootfs.ext4" + partition-type = 0x83 + bootable = "yes" + size = 256M + } +}
board/stmicroelectronics/stm32mp157-dk/linux.config new file +182 -0
182 lines not on this page · raw message
board/stmicroelectronics/stm32mp157-dk/overlay/boot/extlinux/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label stm32mp15-buildroot + kernel /boot/zImage + devicetree /boot/stm32mp157c-dk2.dtb + append root=/dev/mmcblk0p4 rootwait
board/stmicroelectronics/stm32mp157-dk/readme.txt new file +38 -0
@@ -0,0 +1,38 @@ +STM32MP157 Discovery Kit + +Intro +===== + +This configuration supports the STM32MP157 Discovery Kit 2 (DK2) +platform: + + https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html + +How to build +============ + + $ make stm32mp157_dk_defconfig + $ make + +How to write the microSD card +============================= + +Once the build process is finished you will have an image called +"sdcard.img" in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an microSD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +Boot the board +============== + + (1) Insert the microSD card in connector CN15 + + (2) Plug a micro-USB cable in connector CN11 and run your serial + communication program on /dev/ttyACM0. + + (3) Plug a USB-C cable in CN6 to power-up the board. + + (4) The system will start, with the console on UART, but also visible + on the screen.
board/stmicroelectronics/stm32mp157-dk/uboot-fragment.config new file +1 -0
@@ -0,0 +1 @@ +# CONFIG_STM32MP_WATCHDOG is not set
configs/stm32mp157_dk_defconfig new file +30 -0
@@ -0,0 +1,30 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp157-dk/overlay/" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32mp157-dk/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,STMicroelectronics,linux,v4.19-stm32mp-r1.5)/linux-v4.19-stm32mp-r1.5.tar.gz" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp157-dk/linux.config" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32mp157c-dk2" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,STMicroelectronics,u-boot,v2018.11-stm32mp-r2.5)/u-boot-v2018.11-stm32mp-r2.5.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_basic" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/stm32mp157-dk/uboot-fragment.config" +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.stm32" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-dk2" +BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 1 line
2.21.0
Thomas Petazzoni
AppliedPATCH v3 1/1 configs/stm32mp157_dk: new defconfig
Quoted 18 lines · On Wed, 7 Aug 2019 16:24:56 +0200 Thomas Petazzoni…
This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals.
This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only
multi_v7_defconfigsupports it, which is really a massive defconfig. That's why a custom linux configuration file is added.A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running.
The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future.
Quoted 7 lines
Signed-off-by Thomas Petazzoni <[email protected]>---
Changes since v2:
- Bump vendor Linux and U-Boot versions
- Use the $(call github,...) macro also to download U-Boot as a tarball
- Drop all other patches that have been merged
Applied to next, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v3 1/1 configs/stm32mp157_dk: new defconfig
In reply to Thomas PetazzoniQuoted 28 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals.
This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only
multi_v7_defconfigsupports it, which is really a massive defconfig. That's why a custom linux configuration file is added.A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running.
The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future.
Signed-off-by Thomas Petazzoni <[email protected]>---
Changes since v2:
- Bump vendor Linux and U-Boot versions
- Use the $(call github,...) macro also to download U-Boot as a tarball
- Drop all other patches that have been merged
Quoted 7 lines
Peter: if you remember from the hackathon, this defconfig was not booting properly. Turned out I rebased on master, but *before* the point you merged the U-Boot change to support "custom build variables". Due to this the DEVICE_TREE=stm32mp157c-dk2 directive from
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTSwas not taken into account, causing the incorrect DT to be used in the U-Boot build. Properly rebased on the latest master, the defconfig works just fine!
Ahh, that explains it ;)
Signature · 1 line
Bye, Peter Korsgaard