configs/teliv_evk_pro3: remove defconfig

index 15e84d3360..4cdaa09da5 100644
@@ -227,7 +227,6 @@ solidrun_macchiatobin_mainline_defconfig: *defconfig
 solidrun_macchiatobin_marvell_defconfig: *defconfig
 stm32f429_disco_defconfig: *defconfig
 stm32f469_disco_defconfig: *defconfig
-telit_evk_pro3_defconfig: *defconfig
 toradex_apalis_imx6_defconfig: *defconfig
 ts4800_defconfig: *defconfig
 ts4900_defconfig: *defconfig

deleted file mode 100644
index 750ad19cd8..0000000000
@@ -1,2 +0,0 @@
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_AT91SAM9X=y

deleted file mode 100644
index d22fe8f4e4..0000000000
@@ -1,3 +0,0 @@
-CONFIG_KERNEL_LZO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_UBIFS_FS=y

99 lines not on this page · raw message

237 lines not on this page · raw message

deleted file mode 100644
index 6f4efaba1e..0000000000
@@ -1,36 +0,0 @@
-From 60110b93a5cbc6ec3d92035d9daf86a30a7fd791 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
-Date: Wed, 14 Nov 2012 19:18:22 +0800
-Subject: [PATCH 3/4] at91sam9260/9g20: add wathdog support
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
-Signed-off-by: Fabio Porcedda <[email protected]>
----
- arch/arm/mach-at91/at91sam9260_devices.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 67c4ea860..51852a9a8 100644
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -400,6 +400,17 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
- void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
- #endif
- 
-+#ifdef CONFIG_WATCHDOG_AT91SAM9X
-+static int at91_add_device_watchdog(void)
-+{
-+	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
-+		AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
-+
-+	return 0;
-+}
-+coredevice_initcall(at91_add_device_watchdog);
-+#endif
-+
- static int at91_fixup_device(void)
- {
- 	at91_rtt_irq_fixup(IOMEM(AT91SAM9260_BASE_RTT));
--- 
-2.12.0
-

deleted file mode 100644
index edc1ea4d5b..0000000000
@@ -1,26 +0,0 @@
-From d8231b1726a020733d87c2685ec1631403e050cf Mon Sep 17 00:00:00 2001
-From: Fabio Porcedda <[email protected]>
-Date: Thu, 17 Jan 2013 11:32:35 +0100
-Subject: [PATCH 4/4] at91sam9260/9g20: fix wathdog support
-
-Signed-off-by: Fabio Porcedda <[email protected]>
----
- arch/arm/mach-at91/at91sam9260_devices.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 51852a9a8..20c8cac9d 100644
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -404,7 +404,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
- static int at91_add_device_watchdog(void)
- {
- 	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
--		AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
-+		AT91_BASE_WDT, 16, IORESOURCE_MEM, NULL);
- 
- 	return 0;
- }
--- 
-2.12.0
-

97 lines not on this page · raw message

52 lines not on this page · raw message

deleted file mode 100644
index ace9dd4c17..0000000000
@@ -1,28 +0,0 @@
-Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
-
-Official site:
-  http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
-
-Build images:
-    make telit_evk_pro3_defconfig
-    make
-
-  images built:
-  - output/images/barebox.bin
-  - output/images/zImage
-  - output/images/rootfs.ubi
-
-
-Flash built images:
-  The first time you need to bootstrap from Telit Official Release 221.07.1007,
-  at the U-Boot prompt type:
-    U-Boot> loadb
-  send buildroot/output/images/barebox.bin
-    U-Boot> go 0x20200000
-
-  flash updated images using barebox through tftp:
-    barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
-    barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
-    barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
-    barebox:/ erase dev/env0
-    barebox:/ reset

deleted file mode 100644
index 12ce470293..0000000000
@@ -1,32 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm926t=y
-
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/telit/evk-pro3/patches"
-
-# Linux headers same as kernel, a 3.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_9=y
-
-# Watchdog is armed by the first stage bootloader
-BR2_PACKAGE_BUSYBOX_WATCHDOG=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBI=y
-
-# Bootloader
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2017.01.0"
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="telit_evk_pro3"
-BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES="board/telit/evk-pro3/barebox.fragment"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.11"
-BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/telit/evk-pro3/linux.fragment"
-BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="evk-pro3"