ARM: mvebu: let Armada XP also select corediv clk
Subsystems (3)
PATCH 1/1 ARM: mvebu: let Armada XP also select corediv clk
An Armada XP there is also a marvell,armada-370-corediv-clock compatible device that is needed to make the nand device work.
--- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-mvebu/Kconfig +1 -0
@@ -97,6 +97,7 @@ config MACH_ARMADA_XP select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_XP + select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada XP SoC with device tree.
Signature · 1 line
2.8.1
PATCH 1/1 ARM: mvebu: let Armada XP also select corediv clk
Hi Uwe,
Quoted 2 lines · Uwe Kleine-K?nig
An Armada XP there is also a marvell,armada-370-corediv-clock compatible device that is needed to make the nand device work.
Indeed when I acked the commit bd3677ff31a3 ("clk: mvebu: Remove corediv clock from Armada XP") I missed that the armada-370-corediv-clock compatible sting was for Armada 370 and Armada XP. We didn't see it until now because I used the mvebu_v7_defconfig (or the multi_v7_defconfig) where all the mvebu SoC are enabled.
But the Armada 39x also need it and actually all the SoC selecting MVEBU_V7 config need this clock.
So I am sending a patch to fix it and it will part of the pull request to arm-soc for the fix this week.
Thanks,
Gregory
Quoted 21 lines
Signed-off-by Uwe Kleine-K?nig <[email protected]>--- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+)arch/arm/mach-mvebu/Kconfig +1
-0@@ -97,6 +97,7 @@ config MACH_ARMADA_XP select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_XP + select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada XP SoC with device tree.Signature · 1 line
2.8.1
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com