Skip to contentSkip to conversation

ALSA: usb-audio: qcom: move offload usage counting to stream request handler

PATCH In review Guan-Yu Lin 2 participants 2 messages Apr 22 – Apr 30 Sound

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ALSA: usb-audio: qcom: move offload usage counting to stream request handler

Centralize usb_offload_get()/usb_offload_put() calls from various helper functions to handle_uaudio_stream_req(), which ensures the usage count is tied directly to the QMI stream enable/dsiable requests from audio DSP. Such design provides a clear synchronization point for the offloading lifecycle and correctly balances the count for both playback and capture paths while avoiding redundant increments during auxiliary operations.

---
V2 -> V3: Fix canonical patch format error
V1 -> V2: Add error handling path in handle_uaudio_stream_req()

v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/[email protected]/

 sound/usb/qcom/qc_audio_offload.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
sound/usb/qcom/qc_audio_offload.c +11 -10
index 2ac813d57f4f..6b4349d85665 100644
@@ -699,7 +699,6 @@ static void uaudio_event_ring_cleanup_free(struct uaudio_dev *dev)
 		uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE,
 				   PAGE_SIZE);
 		xhci_sideband_remove_interrupter(uadev[dev->chip->card->number].sb);
-		usb_offload_put(dev->udev);
 	}
 }
 
@@ -1183,16 +1182,12 @@ static int uaudio_event_ring_setup(struct snd_usb_substream *subs,
 	dma_coherent = dev_is_dma_coherent(subs->dev->bus->sysdev);
 	er_pa = 0;
 
-	ret = usb_offload_get(subs->dev);
-	if (ret < 0)
-		goto exit;
-
 	/* event ring */
 	ret = xhci_sideband_create_interrupter(uadev[card_num].sb, 1, false,
 					       0, uaudio_qdev->data->intr_num);
 	if (ret < 0) {
 		dev_err(&subs->dev->dev, "failed to fetch interrupter\n");
-		goto put_offload;
+		goto exit;
 	}
 
 	sgt = xhci_sideband_get_event_buffer(uadev[card_num].sb);
@@ -1224,8 +1219,6 @@ static int uaudio_event_ring_setup(struct snd_usb_substream *subs,
 	mem_info->dma = 0;
 remove_interrupter:
 	xhci_sideband_remove_interrupter(uadev[card_num].sb);
-put_offload:
-	usb_offload_put(subs->dev);
 exit:
 	return ret;
 }
@@ -1489,7 +1482,6 @@ static int prepare_qmi_response(struct snd_usb_substream *subs,
 	uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE, PAGE_SIZE);
 free_sec_ring:
 	xhci_sideband_remove_interrupter(uadev[card_num].sb);
-	usb_offload_put(subs->dev);
 drop_sync_ep:
 	if (subs->sync_endpoint) {
 		uaudio_iommu_unmap(MEM_XFER_RING,
@@ -1605,6 +1597,12 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
 	uadev[pcm_card_num].ctrl_intf = chip->ctrl_intf;
 
 	if (req_msg->enable) {
+		ret = usb_offload_get(subs->dev);
+		if (ret < 0) {
+			guard(mutex)(&chip->mutex);
+			subs->opened = 0;
+			goto response;
+		}
 		ret = enable_audio_stream(subs,
 					  map_pcm_format(req_msg->audio_format),
 					  req_msg->number_of_ch, req_msg->bit_rate,
@@ -1614,6 +1612,7 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
 			ret = prepare_qmi_response(subs, req_msg, &resp,
 						   info_idx);
 		if (ret < 0) {
+			usb_offload_put(subs->dev);
 			guard(mutex)(&chip->mutex);
 			subs->opened = 0;
 		}
@@ -1658,9 +1657,11 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
 			uaudio_dev_intf_cleanup(uadev[pcm_card_num].udev,
 						info);
 		}
-		if (atomic_read(&uadev[pcm_card_num].in_use))
+		if (atomic_read(&uadev[pcm_card_num].in_use)) {
 			kref_put(&uadev[pcm_card_num].kref,
 				 uaudio_dev_release);
+			usb_offload_put(subs->dev);
+		}
 	}
 	mutex_unlock(&qdev_mutex);
 
Signature · 1 line
2.54.0.rc1.555.g9c883467ad-goog
#1 lore raw
Quoted 11 lines · Guan-Yu Lin

Centralize usb_offload_get()/usb_offload_put() calls from various helper functions to handle_uaudio_stream_req(), which ensures the usage count is tied directly to the QMI stream enable/dsiable requests from audio DSP. Such design provides a clear synchronization point for the offloading lifecycle and correctly balances the count for both playback and capture paths while avoiding redundant increments during auxiliary operations.

Does this work for the case where the driver gets forcibly removed (disconnected) while being used? That is, handle_uaudio_stream_req() is guaranteed to be called at disconnection? Otherwise it may leave the refcount unbalanced.

thanks,

Takashi

Quoted 94 lines

---
V2 -> V3: Fix canonical patch format error
V1 -> V2: Add error handling path in handle_uaudio_stream_req()

v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/[email protected]/

 sound/usb/qcom/qc_audio_offload.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
sound/usb/qcom/qc_audio_offload.c +11 -10
index 2ac813d57f4f..6b4349d85665 100644
@@ -699,7 +699,6 @@ static void uaudio_event_ring_cleanup_free(struct uaudio_dev *dev)
 		uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE,
 				   PAGE_SIZE);
 		xhci_sideband_remove_interrupter(uadev[dev->chip->card->number].sb);
-		usb_offload_put(dev->udev);
 	}
 }
 
@@ -1183,16 +1182,12 @@ static int uaudio_event_ring_setup(struct snd_usb_substream *subs,
 	dma_coherent = dev_is_dma_coherent(subs->dev->bus->sysdev);
 	er_pa = 0;
 
-	ret = usb_offload_get(subs->dev);
-	if (ret < 0)
-		goto exit;
-
 	/* event ring */
 	ret = xhci_sideband_create_interrupter(uadev[card_num].sb, 1, false,
 					       0, uaudio_qdev->data->intr_num);
 	if (ret < 0) {
 		dev_err(&subs->dev->dev, "failed to fetch interrupter\n");
-		goto put_offload;
+		goto exit;
 	}
 
 	sgt = xhci_sideband_get_event_buffer(uadev[card_num].sb);
@@ -1224,8 +1219,6 @@ static int uaudio_event_ring_setup(struct snd_usb_substream *subs,
 	mem_info->dma = 0;
 remove_interrupter:
 	xhci_sideband_remove_interrupter(uadev[card_num].sb);
-put_offload:
-	usb_offload_put(subs->dev);
 exit:
 	return ret;
 }
@@ -1489,7 +1482,6 @@ static int prepare_qmi_response(struct snd_usb_substream *subs,
 	uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE, PAGE_SIZE);
 free_sec_ring:
 	xhci_sideband_remove_interrupter(uadev[card_num].sb);
-	usb_offload_put(subs->dev);
 drop_sync_ep:
 	if (subs->sync_endpoint) {
 		uaudio_iommu_unmap(MEM_XFER_RING,
@@ -1605,6 +1597,12 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
 	uadev[pcm_card_num].ctrl_intf = chip->ctrl_intf;
 
 	if (req_msg->enable) {
+		ret = usb_offload_get(subs->dev);
+		if (ret < 0) {
+			guard(mutex)(&chip->mutex);
+			subs->opened = 0;
+			goto response;
+		}
 		ret = enable_audio_stream(subs,
 					  map_pcm_format(req_msg->audio_format),
 					  req_msg->number_of_ch, req_msg->bit_rate,
@@ -1614,6 +1612,7 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
 			ret = prepare_qmi_response(subs, req_msg, &resp,
 						   info_idx);
 		if (ret < 0) {
+			usb_offload_put(subs->dev);
 			guard(mutex)(&chip->mutex);
 			subs->opened = 0;
 		}
@@ -1658,9 +1657,11 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
 			uaudio_dev_intf_cleanup(uadev[pcm_card_num].udev,
 						info);
 		}
-		if (atomic_read(&uadev[pcm_card_num].in_use))
+		if (atomic_read(&uadev[pcm_card_num].in_use)) {
 			kref_put(&uadev[pcm_card_num].kref,
 				 uaudio_dev_release);
+			usb_offload_put(subs->dev);
+		}
 	}
 	mutex_unlock(&qdev_mutex);
 
Signature · 1 line
2.54.0.rc1.555.g9c883467ad-goog