Skip to contentSkip to conversation

Replaces long number representation by BIT() macro

RFC PATCH In review Leonardo Bras 3 participants 6 messages Jun 13, 2019 – Jul 7, 2019 PowerPC

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 Replaces long number representation by BIT() macro

The main reason of this change is to make these bitmasks more readable.

The macro ASM_CONST() just appends an UL to it's parameter, so it can be easily replaced by BIT_MASK, that already uses a UL representation.

ASM_CONST() in this file may behave different if __ASSEMBLY__ is defined, as it is used on .S files, just leaving the parameter as is.

However, I have noticed no difference in the generated binary after this change.

---
 arch/powerpc/include/asm/firmware.h | 75 ++++++++++++++---------------
 1 file changed, 37 insertions(+), 38 deletions(-)
arch/powerpc/include/asm/firmware.h +37 -38
index 00bc42d95679..7a5b0cc0bc85 100644
@@ -14,46 +14,45 @@
 
 #ifdef __KERNEL__
 
-#include <asm/asm-const.h>
-
+#include <linux/bits.h>
 /* firmware feature bitmask values */
 
-#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_HPT_RESIZE	ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
-#define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
-#define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)
-#define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
-#define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
-#define FW_FEATURE_PRRN		ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_DRMEM_V2	ASM_CONST(0x0000000400000000)
-#define FW_FEATURE_DRC_INFO	ASM_CONST(0x0000000800000000)
-#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
-#define FW_FEATURE_PAPR_SCM 	ASM_CONST(0x0000002000000000)
+#define FW_FEATURE_PFT		BIT(0)
+#define FW_FEATURE_TCE		BIT(1)
+#define FW_FEATURE_SPRG0		BIT(2)
+#define FW_FEATURE_DABR		BIT(3)
+#define FW_FEATURE_COPY		BIT(4)
+#define FW_FEATURE_ASR		BIT(5)
+#define FW_FEATURE_DEBUG		BIT(6)
+#define FW_FEATURE_TERM		BIT(7)
+#define FW_FEATURE_PERF		BIT(8)
+#define FW_FEATURE_DUMP		BIT(9)
+#define FW_FEATURE_INTERRUPT	BIT(10)
+#define FW_FEATURE_MIGRATE	BIT(11)
+#define FW_FEATURE_PERFMON	BIT(12)
+#define FW_FEATURE_CRQ		BIT(13)
+#define FW_FEATURE_VIO		BIT(14)
+#define FW_FEATURE_RDMA		BIT(15)
+#define FW_FEATURE_LLAN		BIT(16)
+#define FW_FEATURE_BULK_REMOVE	BIT(17)
+#define FW_FEATURE_XDABR		BIT(18)
+#define FW_FEATURE_MULTITCE	BIT(19)
+#define FW_FEATURE_SPLPAR	BIT(20)
+#define FW_FEATURE_LPAR		BIT(22)
+#define FW_FEATURE_PS3_LV1	BIT(23)
+#define FW_FEATURE_HPT_RESIZE	BIT(24)
+#define FW_FEATURE_CMO		BIT(25)
+#define FW_FEATURE_VPHN		BIT(26)
+#define FW_FEATURE_XCMO		BIT(27)
+#define FW_FEATURE_OPAL		BIT(28)
+#define FW_FEATURE_SET_MODE	BIT(30)
+#define FW_FEATURE_BEST_ENERGY	BIT(31)
+#define FW_FEATURE_TYPE1_AFFINITY BIT(32)
+#define FW_FEATURE_PRRN		BIT(33)
+#define FW_FEATURE_DRMEM_V2	BIT(34)
+#define FW_FEATURE_DRC_INFO	BIT(35)
+#define FW_FEATURE_BLOCK_REMOVE	BIT(36)
+#define FW_FEATURE_PAPR_SCM	BIT(37)
 
 #ifndef __ASSEMBLY__
 
Signature · 1 line
2.17.1
#1 lore raw

Sorry, there is a typo on my commit message.
's/BIT_MASK/BIT/'

Quoted 104 lines · Leonardo Bras

The main reason of this change is to make these bitmasks more readable.

The macro ASM_CONST() just appends an UL to it's parameter, so it can be easily replaced by BIT_MASK, that already uses a UL representation.

ASM_CONST() in this file may behave different if __ASSEMBLY__ is defined, as it is used on .S files, just leaving the parameter as is.

However, I have noticed no difference in the generated binary after this change.

---
 arch/powerpc/include/asm/firmware.h | 75 ++++++++++++++---------------
 1 file changed, 37 insertions(+), 38 deletions(-)
arch/powerpc/include/asm/firmware.h +37 -38
index 00bc42d95679..7a5b0cc0bc85 100644
@@ -14,46 +14,45 @@
 
 #ifdef __KERNEL__
 
-#include <asm/asm-const.h>
-
+#include <linux/bits.h>
 /* firmware feature bitmask values */
 
-#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_HPT_RESIZE	ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
-#define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
-#define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)
-#define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
-#define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
-#define FW_FEATURE_PRRN		ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_DRMEM_V2	ASM_CONST(0x0000000400000000)
-#define FW_FEATURE_DRC_INFO	ASM_CONST(0x0000000800000000)
-#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
-#define FW_FEATURE_PAPR_SCM 	ASM_CONST(0x0000002000000000)
+#define FW_FEATURE_PFT		BIT(0)
+#define FW_FEATURE_TCE		BIT(1)
+#define FW_FEATURE_SPRG0		BIT(2)
+#define FW_FEATURE_DABR		BIT(3)
+#define FW_FEATURE_COPY		BIT(4)
+#define FW_FEATURE_ASR		BIT(5)
+#define FW_FEATURE_DEBUG		BIT(6)
+#define FW_FEATURE_TERM		BIT(7)
+#define FW_FEATURE_PERF		BIT(8)
+#define FW_FEATURE_DUMP		BIT(9)
+#define FW_FEATURE_INTERRUPT	BIT(10)
+#define FW_FEATURE_MIGRATE	BIT(11)
+#define FW_FEATURE_PERFMON	BIT(12)
+#define FW_FEATURE_CRQ		BIT(13)
+#define FW_FEATURE_VIO		BIT(14)
+#define FW_FEATURE_RDMA		BIT(15)
+#define FW_FEATURE_LLAN		BIT(16)
+#define FW_FEATURE_BULK_REMOVE	BIT(17)
+#define FW_FEATURE_XDABR		BIT(18)
+#define FW_FEATURE_MULTITCE	BIT(19)
+#define FW_FEATURE_SPLPAR	BIT(20)
+#define FW_FEATURE_LPAR		BIT(22)
+#define FW_FEATURE_PS3_LV1	BIT(23)
+#define FW_FEATURE_HPT_RESIZE	BIT(24)
+#define FW_FEATURE_CMO		BIT(25)
+#define FW_FEATURE_VPHN		BIT(26)
+#define FW_FEATURE_XCMO		BIT(27)
+#define FW_FEATURE_OPAL		BIT(28)
+#define FW_FEATURE_SET_MODE	BIT(30)
+#define FW_FEATURE_BEST_ENERGY	BIT(31)
+#define FW_FEATURE_TYPE1_AFFINITY BIT(32)
+#define FW_FEATURE_PRRN		BIT(33)
+#define FW_FEATURE_DRMEM_V2	BIT(34)
+#define FW_FEATURE_DRC_INFO	BIT(35)
+#define FW_FEATURE_BLOCK_REMOVE	BIT(36)
+#define FW_FEATURE_PAPR_SCM	BIT(37)
 
 #ifndef __ASSEMBLY__
 
#2 lore raw
In reply to Leonardo Bras

Hi Leonardo,

Quoted 7 lines · Leonardo Bras

The main reason of this change is to make these bitmasks more readable.

The macro ASM_CONST() just appends an UL to it's parameter, so it can be easily replaced by BIT_MASK, that already uses a UL representation.

ASM_CONST() in this file may behave different if __ASSEMBLY__ is defined, as it is used on .S files, just leaving the parameter as is.

Thanks for the patch, but I don't consider this an improvement in readability.

At boot we print the firmware features, eg:

firmware_features = 0x00000001c45ffc5f

And it's much easier to match that up to the full constants, than to the bit numbers.

Similarly in memory or register dumps.

What we could do is switch to the UL macro from include/linux/const.h, rather than using our own ASM_CONST.

cheers

Quoted 90 lines
arch/powerpc/include/asm/firmware.h +37 -38
index 00bc42d95679..7a5b0cc0bc85 100644
@@ -14,46 +14,45 @@
 
 #ifdef __KERNEL__
 
-#include <asm/asm-const.h>
-
+#include <linux/bits.h>
 /* firmware feature bitmask values */
 
-#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_HPT_RESIZE	ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
-#define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
-#define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)
-#define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
-#define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
-#define FW_FEATURE_PRRN		ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_DRMEM_V2	ASM_CONST(0x0000000400000000)
-#define FW_FEATURE_DRC_INFO	ASM_CONST(0x0000000800000000)
-#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
-#define FW_FEATURE_PAPR_SCM 	ASM_CONST(0x0000002000000000)
+#define FW_FEATURE_PFT		BIT(0)
+#define FW_FEATURE_TCE		BIT(1)
+#define FW_FEATURE_SPRG0		BIT(2)
+#define FW_FEATURE_DABR		BIT(3)
+#define FW_FEATURE_COPY		BIT(4)
+#define FW_FEATURE_ASR		BIT(5)
+#define FW_FEATURE_DEBUG		BIT(6)
+#define FW_FEATURE_TERM		BIT(7)
+#define FW_FEATURE_PERF		BIT(8)
+#define FW_FEATURE_DUMP		BIT(9)
+#define FW_FEATURE_INTERRUPT	BIT(10)
+#define FW_FEATURE_MIGRATE	BIT(11)
+#define FW_FEATURE_PERFMON	BIT(12)
+#define FW_FEATURE_CRQ		BIT(13)
+#define FW_FEATURE_VIO		BIT(14)
+#define FW_FEATURE_RDMA		BIT(15)
+#define FW_FEATURE_LLAN		BIT(16)
+#define FW_FEATURE_BULK_REMOVE	BIT(17)
+#define FW_FEATURE_XDABR		BIT(18)
+#define FW_FEATURE_MULTITCE	BIT(19)
+#define FW_FEATURE_SPLPAR	BIT(20)
+#define FW_FEATURE_LPAR		BIT(22)
+#define FW_FEATURE_PS3_LV1	BIT(23)
+#define FW_FEATURE_HPT_RESIZE	BIT(24)
+#define FW_FEATURE_CMO		BIT(25)
+#define FW_FEATURE_VPHN		BIT(26)
+#define FW_FEATURE_XCMO		BIT(27)
+#define FW_FEATURE_OPAL		BIT(28)
+#define FW_FEATURE_SET_MODE	BIT(30)
+#define FW_FEATURE_BEST_ENERGY	BIT(31)
+#define FW_FEATURE_TYPE1_AFFINITY BIT(32)
+#define FW_FEATURE_PRRN		BIT(33)
+#define FW_FEATURE_DRMEM_V2	BIT(34)
+#define FW_FEATURE_DRC_INFO	BIT(35)
+#define FW_FEATURE_BLOCK_REMOVE	BIT(36)
+#define FW_FEATURE_PAPR_SCM	BIT(37)
 
 #ifndef __ASSEMBLY__
 
Signature · 1 line
2.17.1
#4 lore raw
Quoted 5 lines · Segher Boessenkool
Quoted 2 lines · Michael Ellerman

What we could do is switch to the UL macro from include/linux/const.h, rather than using our own ASM_CONST.

You need gas 2.28 or later for that though.

Oh, but apparently I cannot read. That macro should work fine.

Segher

#5 lore raw
Quoted 8 lines · Segher Boessenkool
Quoted 5 lines · Segher Boessenkool
Quoted 2 lines · Michael Ellerman

What we could do is switch to the UL macro from include/linux/const.h, rather than using our own ASM_CONST.

You need gas 2.28 or later for that though.

Oh, but apparently I cannot read. That macro should work fine.

:)

Yeah one day we'll be able to drop them entirely, but not yet.

The official minimum is 2.20:
https://www.kernel.org/doc/html/latest/process/changes.html

But my "old" toolchain is binutils 2.22, so that's effectively the minimum for anything I test. I'm not sure many people are actually testing with 2.20.

cheers