Various retries for LSPCON
Subsystems (3)
v3 cover Various retries for LSPCON
This patch series adds various retries and delays
in DRM and I915 layer, to handle some of the read
failures while dealing with LSPCON devices.
LSPCON devices are sometimes slow to respond and
the vendores expect us to retry while probing the
device.
The typical scenarios are getting fixed / handled with
this patch series are look like this failure during LSPCON suspend/resume:
[drm:drm_lspcon_get_mode] *ERROR* LSPCON read(0x80, 0x41) failed [drm:lspcon_wait_mode [i915]] *ERROR* Error reading LSPCON mode [drm:drm_lspcon_get_mode] *ERROR* LSPCON read(0x80, 0x41) failed [drm:lspcon_change_mode.constprop.4 [i915]] *ERROR* Error reading LSPCON mode [drm:lspcon_resume [i915]] *ERROR* LSPCON resume failed
Setting dangerous option reset - tainting kernel
Shashank Sharma (3):
drm: Add retries for lspcon mode detection
drm/i915: Don't give up waiting on INVALID_MODE
drm/i915: Add retries for LSPCON detection
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 16 +++++++++++++--- drivers/gpu/drm/i915/intel_lspcon.c | 22 +++++++++++++++------- 2 files changed, 28 insertions(+), 10 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 1/3 drm: Add retries for lspcon mode detection
From the CI builds, its been observed that during a driver reload/insert, dp dual mode read function sometimes fails to read from LSPCON device over i2c-over-aux channel.
This patch:
- adds some delay and few retries, allowing a scope for these devices to settle down and respond.
- changes one error log's level from ERROR->DEBUG as we want to call it an error only after all the retries are exhausted.
V2: Addressed review comments from Jani (for loop for retry)
V3: Addressed review comments from Imre (break on partial read too)
V3: Addressed review comments from Ville/Imre (Add the retries
exclusively for LSPCON, not for all dp_dual_mode devices)
--- drivers/gpu/drm/drm_dp_dual_mode_helper.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_dp_dual_mode_helper.c +13 -3
@@ -410,6 +410,7 @@ int drm_lspcon_get_mode(struct i2c_adapter *adapter, {u8 data;int ret =0 ; +int retry;if (!mode) {DRM_ERROR ("NULL input\n" );
@@ -417,10 +418,19 @@ int drm_lspcon_get_mode(struct i2c_adapter *adapter, }/* Read Status: i2c over aux */ - ret =drm_dp_dual_mode_read (adapter,DP_DUAL_MODE_LSPCON_CURRENT_MODE , - &data,sizeof (data)); +for (retry =0 ; retry <6 ; retry++) { +if (retry) +usleep_range (500 ,1000 ); + + ret =drm_dp_dual_mode_read (adapter, +DP_DUAL_MODE_LSPCON_CURRENT_MODE , + &data,sizeof (data)); +if (!ret) +break ; + } +if (ret <0 ) { -DRM_ERROR ("LSPCON read(0x80, 0x41) failed\n" ); +DRM_DEBUG_KMS ("LSPCON read(0x80, 0x41) failed\n" );return -EFAULT ; }
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 1/3] drm: Add retries for lspcon mode detection
Quoted 15 lines · Shashank Sharma
From the CI builds, its been observed that during a driver reload/insert, dp dual mode read function sometimes fails to read from LSPCON device over i2c-over-aux channel.
This patch:
- adds some delay and few retries, allowing a scope for these devices to settle down and respond.
- changes one error log's level fromERROR->DEBUGas we want to call it an error only after all the retries are exhausted.V2: Addressed review comments from Jani (for loop for retry)
V3: Addressed review comments from Imre (break on partial read too)
V3: Addressed review comments from Ville/Imre (Add the retries
exclusively for LSPCON, not for alldp_dual_modedevices)
Quoted 4 lines
Cc Ville Syrjala <[email protected]>Cc Imre Deak <[email protected]>Cc Jani Nikula <[email protected]>Signed-off-by Shashank Sharma <[email protected]>
Quoted 42 lines
--- drivers/gpu/drm/drm_dp_dual_mode_helper.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)drivers/gpu/drm/drm_dp_dual_mode_helper.c +13
-3@@ -410,6 +410,7 @@ int drm_lspcon_get_mode(struct i2c_adapter *adapter, {u8 data;int ret =0 ; +int retry;if (!mode) {DRM_ERROR ("NULL input\n" );@@ -417,10 +418,19 @@ int drm_lspcon_get_mode(struct i2c_adapter *adapter, }/* Read Status: i2c over aux */ - ret =drm_dp_dual_mode_read (adapter,DP_DUAL_MODE_LSPCON_CURRENT_MODE , - &data,sizeof (data)); +for (retry =0 ; retry <6 ; retry++) { +if (retry) +usleep_range (500 ,1000 ); + + ret =drm_dp_dual_mode_read (adapter, +DP_DUAL_MODE_LSPCON_CURRENT_MODE , + &data,sizeof (data)); +if (!ret) +break ; + } +if (ret <0 ) { -DRM_ERROR ("LSPCON read(0x80, 0x41) failed\n" ); +DRM_DEBUG_KMS ("LSPCON read(0x80, 0x41) failed\n" );return -EFAULT ; }Signature · 1 line
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 2/3 drm/i915: Don't give up waiting on INVALID_MODE
In reply to Shashank SharmaOur current logic to read LSPCON's current mode, stops retries and breaks wait-loop, if it gets LSPCON_MODE_INVALID as return from the core function. This doesn't allow us to try reading the mode again.
This patch removes this condition and allows retries reading the currnt mode until timeout.
This also fixes/prevents some of the noise in form of debug messages while running IGT CI test cases.
V2: rebase, added r-b
V2: changed some debug message levels from debug->error and
error->debug in lspcon_get_current_mode function.
V3: Rebase
--- drivers/gpu/drm/i915/intel_lspcon.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_lspcon.c +4 -5
@@ -56,7 +56,7 @@ static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon)struct i2c_adapter *adapter = &lspcon_to_intel_dp (lspcon)->aux.ddc;if (drm_lspcon_get_mode (adapter, ¤t_mode)) { -DRM_ERROR ("Error reading LSPCON mode\n" ); +DRM_DEBUG_KMS ("Error reading LSPCON mode\n" );return DRM_LSPCON_MODE_INVALID ; }return current_mode;
@@ -68,16 +68,15 @@ static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon,enum drm_lspcon_mode current_mode; current_mode =lspcon_get_current_mode (lspcon); -if (current_mode == mode || current_mode ==DRM_LSPCON_MODE_INVALID ) +if (current_mode == mode) goto out;DRM_DEBUG_KMS ("Waiting for LSPCON mode %s to settle\n" ,lspcon_mode_name (mode)); -wait_for ((current_mode =lspcon_get_current_mode (lspcon)) == mode || - current_mode ==DRM_LSPCON_MODE_INVALID ,100 ); +wait_for ((current_mode =lspcon_get_current_mode (lspcon)) == mode,100 );if (current_mode != mode) -DRM_DEBUG_KMS ("LSPCON mode hasn't settled\n" ); +DRM_ERROR ("LSPCON mode hasn't settled\n" ); out: DRM_DEBUG_KMS("Current LSPCON mode %s\n",
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 3/3 drm/i915: Add retries for LSPCON detection
In reply to Shashank SharmaWe read the dp dual mode Adapter identifier to detect the LSPCON device. It's been observed from the CI testing that in few cases, this read can get delayed or fail. For such scenarios, LSPCON vendors suggest to retry the read operation.
This patch adds retry in the probe function, while reading LSPCON identifier.
V3: added this patch in the series
--- drivers/gpu/drm/i915/intel_lspcon.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_lspcon.c +11 -2
@@ -132,6 +132,7 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)static bool lspcon_probe (struct intel_lspcon *lspcon) { +int retry;enum drm_dp_dual_mode_type adaptor_type;struct i2c_adapter *adapter = &lspcon_to_intel_dp (lspcon)->aux.ddc;enum drm_lspcon_mode expected_mode;
@@ -140,10 +141,18 @@ static bool lspcon_probe(struct intel_lspcon *lspcon) DRM_LSPCON_MODE_PCON :DRM_LSPCON_MODE_LS ;/* Lets probe the adaptor and check its type */ - adaptor_type =drm_dp_dual_mode_detect (adapter); +for (retry =0 ; retry <6 ; retry++) { +if (retry) +usleep_range (500 ,1000 ); + + adaptor_type =drm_dp_dual_mode_detect (adapter); +if (adaptor_type ==DRM_DP_DUAL_MODE_LSPCON ) +break ; + } +if (adaptor_type !=DRM_DP_DUAL_MODE_LSPCON ) {DRM_DEBUG_KMS ("No LSPCON detected, found %s\n" , -drm_dp_get_dual_mode_type_name (adaptor_type)); +drm_dp_get_dual_mode_type_name (adaptor_type));return false; }
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 3/3] drm/i915: Add retries for LSPCON detection
Quoted 30 lines · Shashank Sharma
We read the dp dual mode Adapter identifier to detect the LSPCON device. It's been observed from the CI testing that in few cases, this read can get delayed or fail. For such scenarios, LSPCON vendors suggest to retry the read operation.
This patch adds retry in the probe function, while reading LSPCON identifier.
V3: added this patch in the series
Cc Ville Syrjala <[email protected]>Cc Imre Deak <[email protected]>Signed-off-by Shashank Sharma <[email protected]>--- drivers/gpu/drm/i915/intel_lspcon.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_lspcon.c +1
-0@@ -132,6 +132,7 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)static bool lspcon_probe (struct intel_lspcon *lspcon) { +int retry;enum drm_dp_dual_mode_type adaptor_type;struct i2c_adapter *adapter = &lspcon_to_intel_dp (lspcon)->aux.ddc;enum drm_lspcon_mode expected_mode;
drivers/gpu/drm/i915/intel_lspcon.c static bool lspcon_probe(struct intel_lspcon *lspcon) · line 149
Quoted 10 lines
drivers/gpu/drm/i915/intel_lspcon.c +6
-1@@ -140,10 +141,18 @@ static bool lspcon_probe(struct intel_lspcon *lspcon) DRM_LSPCON_MODE_PCON :DRM_LSPCON_MODE_LS ;/* Lets probe the adaptor and check its type */ - adaptor_type =drm_dp_dual_mode_detect (adapter); +for (retry =0 ; retry <6 ; retry++) { +if (retry) +usleep_range (500 ,1000 ); + + adaptor_type =drm_dp_dual_mode_detect (adapter); +if (adaptor_type ==DRM_DP_DUAL_MODE_LSPCON )
I wondered if this should be (adaptor_type != DRM_DP_DUAL_MODE_UNKNOWN), since the other cases are not known to cause a problem. But we'll probe LSPCON only if VBT says so and if VBT is broken we'll anyway incur the retry overhead here. So looks ok:
Quoted 13 lines
drivers/gpu/drm/i915/intel_lspcon.c +4
-1+break ; + } +if (adaptor_type !=DRM_DP_DUAL_MODE_LSPCON ) {DRM_DEBUG_KMS ("No LSPCON detected, found %s\n" , -drm_dp_get_dual_mode_type_name (adaptor_type)); +drm_dp_get_dual_mode_type_name (adaptor_type));return false; }Signature · 1 line
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 9 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Shashank Sharma
Sent: tiistai 10. lokakuuta 2017 13.08
To: [email protected]
Subject: [Intel-gfx] [PATCH v3 0/3] Various retries for LSPCONThis patch series adds various retries and delays in DRM and I915 layer, to handle some of the read failures while dealing with LSPCON devices.
Should we have reference to fdo bugs?
https://bugs.freedesktop.org/show_bug.cgi?id=102294
https://bugs.freedesktop.org/show_bug.cgi?id=102295
and what about this?
https://bugs.freedesktop.org/show_bug.cgi?id=102359
Quoted 19 lines
LSPCON devices are sometimes slow to respond and the vendores expect us to retry while probing the device.
The typical scenarios are getting fixed / handled with this patch series are look like this failure during LSPCON
suspend/resume:
[drm:drm_lspcon_get_mode] *ERROR* LSPCONread(0x80, 0x41)failed [drm:lspcon_wait_mode [i915]] *ERROR* Error reading LSPCON mode [drm:drm_lspcon_get_mode] *ERROR* LSPCONread(0x80, 0x41)failed [drm:lspcon_change_mode.constprop.4 [i915]] *ERROR* Error reading LSPCON mode [drm:lspcon_resume [i915]] *ERROR* LSPCON resume failed Setting dangerous option reset - tainting kernelShashank Sharma (3):
drm: Add retries for lspcon mode detection
drm/i915: Don't give up waiting onINVALID_MODE
drm/i915: Add retries for LSPCON detection
Quoted 6 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 16 +++++++++++++--- drivers/gpu/drm/i915/intel_lspcon.c | 22 +++++++++++++++------- 2 files changed, 28 insertions(+), 10 deletions(-)--
2.7.4
Jani Saarinen
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Regards
Shashank
Quoted 9 lines · Jani
Hi,
Quoted 7 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Shashank Sharma
Sent: tiistai 10. lokakuuta 2017 13.08
To: [email protected]
Subject: [Intel-gfx] [PATCH v3 0/3] Various retries for LSPCON
Quoted 5 lines
Quoted 2 lines
This patch series adds various retries and delays in DRM and I915 layer, to handle some of the read failures while dealing with LSPCON devices.
Should we have reference to fdo bugs?
https://bugs.freedesktop.org/show_bug.cgi?id=102294
https://bugs.freedesktop.org/show_bug.cgi?id=102295
Yes, sure seems like a good idea.
Quoted 2 lines
and what about this?
https://bugs.freedesktop.org/show_bug.cgi?id=102359
This seems like one probable candidate :)
- Shashank
Quoted 22 lines
Quoted 22 lines
LSPCON devices are sometimes slow to respond and the vendores expect us to retry while probing the device.
The typical scenarios are getting fixed / handled with this patch series are look like this failure during LSPCON
suspend/resume:
[drm:drm_lspcon_get_mode] *ERROR* LSPCONread(0x80, 0x41)failed [drm:lspcon_wait_mode [i915]] *ERROR* Error reading LSPCON mode [drm:drm_lspcon_get_mode] *ERROR* LSPCONread(0x80, 0x41)failed [drm:lspcon_change_mode.constprop.4 [i915]] *ERROR* Error reading LSPCON mode [drm:lspcon_resume [i915]] *ERROR* LSPCON resume failed Setting dangerous option reset - tainting kernelShashank Sharma (3):
drm: Add retries for lspcon mode detection drm/i915: Don't give up waiting onINVALID_MODEdrm/i915: Add retries for LSPCON detectiondrivers/gpu/drm/drm_dp_dual_mode_helper.c | 16 +++++++++++++--- drivers/gpu/drm/i915/intel_lspcon.c | 22 +++++++++++++++------- 2 files changed, 28 insertions(+), 10 deletions(-)
Quoted 7 lines
Quoted 2 lines
--
2.7.4Jani Saarinen
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 17 lines · Shashank
Regards
Shashank
Quoted 11 lines · Jani
Hi,
Quoted 9 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Shashank Sharma
Sent: tiistai 10. lokakuuta 2017 13.08
To: [email protected]
Subject: [Intel-gfx] [PATCH v3 0/3] Various retries for LSPCONThis patch series adds various retries and delays in DRM and I915 layer, to handle some of the read failures while dealing with LSPCON devices.
Quoted 7 lines
Quoted 3 lines
Should we have reference to fdo bugs?
https://bugs.freedesktop.org/show_bug.cgi?id=102294
https://bugs.freedesktop.org/show_bug.cgi?id=102295Yes, sure seems like a good idea.
Quoted 2 lines
and what about this?
https://bugs.freedesktop.org/show_bug.cgi?id=102359This seems like one probable candidate :)
Pushed the series, thanks for the patches and review. Added a bunch of likely Bugzilla links to all commits, didn't bother with mapping commits and bugs. Probably the whole series is needed for most of them anyway.
BR,
Jani.
Quoted 36 lines
- Shashank
Quoted 22 lines
Quoted 22 lines
LSPCON devices are sometimes slow to respond and the vendores expect us to retry while probing the device.
The typical scenarios are getting fixed / handled with this patch series are look like this failure during LSPCON
suspend/resume:
[drm:drm_lspcon_get_mode] *ERROR* LSPCONread(0x80, 0x41)failed [drm:lspcon_wait_mode [i915]] *ERROR* Error reading LSPCON mode [drm:drm_lspcon_get_mode] *ERROR* LSPCONread(0x80, 0x41)failed [drm:lspcon_change_mode.constprop.4 [i915]] *ERROR* Error reading LSPCON mode [drm:lspcon_resume [i915]] *ERROR* LSPCON resume failed Setting dangerous option reset - tainting kernelShashank Sharma (3):
drm: Add retries for lspcon mode detection drm/i915: Don't give up waiting onINVALID_MODEdrm/i915: Add retries for LSPCON detectiondrivers/gpu/drm/drm_dp_dual_mode_helper.c | 16 +++++++++++++--- drivers/gpu/drm/i915/intel_lspcon.c | 22 +++++++++++++++------- 2 files changed, 28 insertions(+), 10 deletions(-)Quoted 7 lines
Quoted 2 lines
--
2.7.4Jani Saarinen
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Various retries for LSPCON
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: Various retries for LSPCON
URL : https://patchwork.freedesktop.org/series/31639/
State : success
== Summary ==
Series 31639v1 Various retries for LSPCON
https://patchwork.freedesktop.org/api/1.0/series/31639/revisions/1/mbox/
Test gem_exec_suspend:
Subgroup basic-s4-devices:
dmesg-warn -> PASS (fi-kbl-7567u) fdo#102294 +3
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
incomplete -> PASS (fi-kbl-r) fdo#102846
Test pm_rpm:
Subgroup basic-pci-d3-state:
dmesg-warn -> PASS (fi-cfl-s) fdo#103169
Test drv_module_reload:
Subgroup basic-reload:
dmesg-warn -> PASS (fi-cfl-s) fdo#103186
Subgroup basic-reload-inject:
incomplete -> PASS (fi-cfl-s) fdo#103022fdo#102294 https://bugs.freedesktop.org/show_bug.cgi?id=102294
fdo#102846 https://bugs.freedesktop.org/show_bug.cgi?id=102846
fdo#103169 https://bugs.freedesktop.org/show_bug.cgi?id=103169
fdo#103186 https://bugs.freedesktop.org/show_bug.cgi?id=103186
fdo#103022 https://bugs.freedesktop.org/show_bug.cgi?id=103022
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:456s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:470s fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:395s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:565s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:284s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:516s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:522s fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:533s fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:514s fi-cfl-s total:289 pass:256 dwarn:1 dfail:0 fail:0 skip:32 time:557s fi-cnl-y total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:621s fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:428s fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:598s fi-hsw-4770 total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:442s fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:417s fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:459s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:507s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:471s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:504s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:572s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:486s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:593s fi-pnv-d510 total:289 pass:222 dwarn:1 dfail:0 fail:0 skip:66 time:665s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:478s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:652s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:534s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:518s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:475s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:576s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:431s
6a08510077ad5bdbac044038138f217e413cdca2 drm-tip: 2017y-10m-10d-07h-48m-31s UTC integration manifest 0803f1bdb9cc drm/i915: Add retries for LSPCON detection919f3410bdf7 drm/i915: Don't give up waiting on INVALID_MODE714ba04dd953 drm: Add retries for lspcon mode detection
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5967/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Various retries for LSPCON
In reply to Shashank Sharma== Series Details ==
== Series Details ==
Series: Various retries for LSPCON
URL : https://patchwork.freedesktop.org/series/31639/
State : success
== Summary ==
shard-hsw total:2552 pass:1412 dwarn:24 dfail:0 fail:13 skip:1103 time:9584s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5967/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx