Skip to contentSkip to conversation

arm64: marvell: add support for the slave CP in Armada 8K

PATCH New Thomas Petazzoni 2 participants 4 messages Jul 28, 2016 – Aug 8, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover arm64: marvell: add support for the slave CP in Armada 8K

Hello,

The following set of two patches add support for the slave CP HW block found in the Armada 8K SoCs. As a reminder:

- Armada 7K is an SoC with one AP and one CP. The AP is the part that contains the CPU, cache and a few basic I/Os. The CP is the part that contains most interesting I/Os (PCIe, SATA, USB, Ethernet, etc.)

- Armada 8K is an SoC with one AP and two CPs.

This set of patches add support for the second CP found in Armada 8K, also called the "slave CP110".

Thanks,

Thomas

Thomas Petazzoni (2):
arm64: dts: marvell: add description for the slave CP110 in Armada 8K
arm64: dts: marvell: add description for the Armada 8040 dev board

 arch/arm64/boot/dts/marvell/Makefile               |   1 +
 arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
 .../{armada-8020.dtsi => armada-8040-db.dts}       | 109 ++++++++-
 arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
 5 files changed, 351 insertions(+), 7 deletions(-)
 copy arch/arm64/boot/dts/marvell/{armada-8020.dtsi => armada-8040-db.dts} (55%)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/2 arm64: dts: marvell: add description for the slave CP110 in Armada 8K

The Armada 8K platforms (8020 and 8040) have two CP110 HW blocks: one master, one slave. So far, only the master CP110 was described. This commit adds the Device Tree description for the slave CP110, and hooks it up in the DT description of the Armada 8020 and Armada 8040 SoCs.

The slave CP110 description is somewhat similar to the master CP110 description except for a number of things like register offsets, interrupt numbers, references to clocks, etc.

---
 arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
 arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
arch/arm64/boot/dts/marvell/armada-8020.dtsi +1 -0
index 3753c1c..048e5cf 100644
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8020";
arch/arm64/boot/dts/marvell/armada-8040.dtsi +1 -0
index 8bd0d8f..9c1b28c 100644
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-quad.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8040";
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi new file +246 -0

246 lines not on this page · raw message

Signature · 1 line
2.7.4
#2 lore raw

PATCH 2/2 arm64: dts: marvell: add description for the Armada 8040 dev board

In reply to Thomas Petazzoni

This commit adds a Device Tree description for the Marvell Armada 8040 Development Board. It features a quad-core Cortex A72 Armada 8040 SoC, with a large number of peripherals: dual Gigabit, dual 10 GBit, 6 PCIe interfaces, 6 SATA ports, 4 USB 3.0 ports, and more.

Only a subset of the functionalities are supported so far, and additional features will be progressively enabled in the future.

---
 arch/arm64/boot/dts/marvell/Makefile           |   1 +
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 150 +++++++++++++++++++++++++
 2 files changed, 151 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-db.dts
arch/arm64/boot/dts/marvell/Makefile +1 -0
index 308468d..cf39531 100644
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
arch/arm64/boot/dts/marvell/armada-8040-db.dts new file +150 -0

150 lines not on this page · raw message

Signature · 1 line
2.7.4
#3 lore raw

cover arm64: marvell: add support for the slave CP in Armada 8K

In reply to Thomas Petazzoni

Hi Thomas,

Quoted 10 lines · Thomas Petazzoni

Hello,

The following set of two patches add support for the slave CP HW block found in the Armada 8K SoCs. As a reminder:

- Armada 7K is an SoC with one AP and one CP. The AP is the part that contains the CPU, cache and a few basic I/Os. The CP is the part that contains most interesting I/Os (PCIe, SATA, USB, Ethernet, etc.)

Quoted 4 lines

- Armada 8K is an SoC with one AP and two CPs.

This set of patches add support for the second CP found in Armada 8K, also called the "slave CP110".

Both patches applied on mvebu/dt64

Thanks,

Gregory

Quoted 21 lines

Thanks,

Thomas

Thomas Petazzoni (2):
arm64: dts: marvell: add description for the slave CP110 in Armada 8K
arm64: dts: marvell: add description for the Armada 8040 dev board

 arch/arm64/boot/dts/marvell/Makefile               |   1 +
 arch/arm64/boot/dts/marvell/armada-8020.dtsi       |   1 +
 .../{armada-8020.dtsi => armada-8040-db.dts}       | 109 ++++++++-
 arch/arm64/boot/dts/marvell/armada-8040.dtsi       |   1 +
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++
 5 files changed, 351 insertions(+), 7 deletions(-)
 copy arch/arm64/boot/dts/marvell/{armada-8020.dtsi => armada-8040-db.dts} (55%)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
Signature · 1 line
2.7.4
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com