Skip to contentSkip to conversation

ARM: OMAP3+: SmartReflex: bugfixes and clean-ups

PATCH Superseded Jean Pihet 3 participants 22 messages Feb 8, 2012 – Feb 29, 2012

Subsystems (4)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Jean Pihet

author
#0 lore raw

v4 cover ARM: OMAP3+: SmartReflex: bugfixes and clean-ups

Integrate the latest SmartReflex bufixes from Felipe Balbi [1] and Nishant Menon [2], plus misc bugfixesi and minor clean-ups.

Based on latest master branch of the mainline git tree (3.3.0-rc2) [3], commit 98e96852480566333f6dacd3223f0be15df34d60.

[1] http://marc.info/?l=linux-omap&m=132134699423547&w=2
[2] https://github.com/nmenon/linux-omap-ti-pm/commits/linux-omap-3.0
[3] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=shortlog

Revision history:
. v4:
include only the bugfixes and clean-up commits
rebase on 3.3-rc2

. v3:
fixed the error handling code

. v2:
fixed the use of debugfs_create_* API
minor fixes after comments on l-o ML: commits title, removed unneeded
fields in descriptions
removed the unneeded patches about the suspend/resume handlers

. v1:
initial commits

Felipe Balbi (4):
ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
ARM: OMAP3+: SmartReflex: misc cleanups
ARM: OMAP3+: SmartReflex: micro-optimization for sanity check

Jean Pihet (3):
ARM: OMAP3+: SmartReflex: use __devexit_p annotation
ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
ARM: OMAP3+: SmartReflex: fix error handling

Nishanth Menon (6):
ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence
ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
ARM: OMAP3+: SmartReflex: Add a shutdown hook
ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
ARM: OMAP3+: hwmod: add SmartReflex IRQs

Shweta Gulati (1):
ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]

 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c   |   31 +++-
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |   19 ++-
 arch/arm/mach-omap2/smartreflex-class3.c     |    1 +
 arch/arm/mach-omap2/smartreflex.c            |  229 +++++++++++++++++++-------
 arch/arm/mach-omap2/smartreflex.h            |   10 +
 arch/arm/mach-omap2/sr_device.c              |   11 +-
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    2 -
 7 files changed, 230 insertions(+), 73 deletions(-)
Signature · 1 line
1.7.5.4
author
#1 lore raw

PATCH v4 1/14 ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]

From: Shweta Gulati <[email protected]>

To set sr ntarget values for all volt_domain, volt_table is retrieved by doing a look_up of 'vdd_name' field from omap_hwmod but voltage domain pointer does not belong to omap_hwmod and is not used anywhere else. As a part of voltage layer and SR Layer clean up volt pointer is removed from omap_hwmod and added in dev attributes of SR.

Tested on OMAP3630 SDP and OMAP4430 SDP Board

[nm at ti.com: minor modifications in sequence and GPU support]

Acked by: Nishanth Menon <[email protected]>

Cc Benoit Cousson <[email protected]>
Cc Paul Walmsley <[email protected]>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c   |   17 +++++++++++++----
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |   19 ++++++++++++++++---
 arch/arm/mach-omap2/smartreflex.h            |    9 +++++++++
 arch/arm/mach-omap2/sr_device.c              |   11 +++++++----
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    2 --
 5 files changed, 45 insertions(+), 13 deletions(-)
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +13 -4
index 3c8dd92..8688960 100644
@@ -29,6 +29,7 @@
 
 #include "omap_hwmod_common_data.h"
 
+#include "smartreflex.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
@@ -2664,6 +2665,10 @@ static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
 };
 
 /* SR1 */
+static struct omap_smartreflex_dev_attr sr1_dev_attr = {
+	.sensor_voltdm_name   = "mpu_iva",
+};
+
 static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
 	&omap3_l4_core__sr1,
 };
@@ -2672,7 +2677,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 	.name		= "sr1_hwmod",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
-	.vdd_name	= "mpu_iva",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2684,6 +2688,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 	},
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.dev_attr	= &sr1_dev_attr,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2691,7 +2696,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 	.name		= "sr1_hwmod",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
-	.vdd_name	= "mpu_iva",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2703,9 +2707,14 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 	},
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.dev_attr	= &sr1_dev_attr,
 };
 
 /* SR2 */
+static struct omap_smartreflex_dev_attr sr2_dev_attr = {
+	.sensor_voltdm_name	= "core",
+};
+
 static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
 	&omap3_l4_core__sr2,
 };
@@ -2714,7 +2723,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 	.name		= "sr2_hwmod",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
-	.vdd_name	= "core",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2726,6 +2734,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 	},
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.dev_attr	= &sr2_dev_attr,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2733,7 +2742,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 	.name		= "sr2_hwmod",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
-	.vdd_name	= "core",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -2745,6 +2753,7 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 	},
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.dev_attr	= &sr2_dev_attr,
 };
 
 /*
arch/arm/mach-omap2/omap_hwmod_44xx_data.c +16 -3
index ef0524c..ee3624b 100644
@@ -34,6 +34,7 @@
 
 #include "omap_hwmod_common_data.h"
 
+#include "smartreflex.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"
@@ -3963,6 +3964,10 @@ static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
 };
 
 /* smartreflex_core */
+static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
+	.sensor_voltdm_name   = "core",
+};
+
 static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
 	{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
@@ -3999,7 +4004,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
 	.mpu_irqs	= omap44xx_smartreflex_core_irqs,
 
 	.main_clk	= "smartreflex_core_fck",
-	.vdd_name	= "core",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
@@ -4009,9 +4013,14 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
 	},
 	.slaves		= omap44xx_smartreflex_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
+	.dev_attr	= &smartreflex_core_dev_attr,
 };
 
 /* smartreflex_iva */
+static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
+	.sensor_voltdm_name	= "iva",
+};
+
 static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
 	{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
@@ -4047,7 +4056,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
 	.clkdm_name	= "l4_ao_clkdm",
 	.mpu_irqs	= omap44xx_smartreflex_iva_irqs,
 	.main_clk	= "smartreflex_iva_fck",
-	.vdd_name	= "iva",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
@@ -4057,9 +4065,14 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
 	},
 	.slaves		= omap44xx_smartreflex_iva_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
+	.dev_attr	= &smartreflex_iva_dev_attr,
 };
 
 /* smartreflex_mpu */
+static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
+	.sensor_voltdm_name	= "mpu",
+};
+
 static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
 	{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
@@ -4095,7 +4108,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
 	.clkdm_name	= "l4_ao_clkdm",
 	.mpu_irqs	= omap44xx_smartreflex_mpu_irqs,
 	.main_clk	= "smartreflex_mpu_fck",
-	.vdd_name	= "mpu",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
@@ -4105,6 +4117,7 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
 	},
 	.slaves		= omap44xx_smartreflex_mpu_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
+	.dev_attr	= &smartreflex_mpu_dev_attr,
 };
 
 /*
arch/arm/mach-omap2/smartreflex.h +9 -0
index 5f35b9e..fd61498 100644
@@ -152,6 +152,15 @@ struct omap_sr_pmic_data {
 	void (*sr_pmic_init) (void);
 };
 
+/**
+ * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
+ *
+ * @sensor_voltdm_name:       Name of voltdomain of SR instance
+ */
+struct omap_smartreflex_dev_attr {
+	const char      *sensor_voltdm_name;
+};
+
 #ifdef CONFIG_OMAP_SMARTREFLEX
 /*
  * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
arch/arm/mach-omap2/sr_device.c +7 -4
index 9f43fcc..6029337 100644
@@ -74,6 +74,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
 	struct omap_sr_data *sr_data;
 	struct platform_device *pdev;
 	struct omap_volt_data *volt_data;
+	struct omap_smartreflex_dev_attr *sr_dev_attr;
 	char *name = "smartreflex";
 	static int i;
 
@@ -84,9 +85,11 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
 		return -ENOMEM;
 	}
 
-	if (!oh->vdd_name) {
+	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
 		pr_err("%s: No voltage domain specified for %s."
-			"Cannot initialize\n", __func__, oh->name);
+				"Cannot initialize\n", __func__,
+					oh->name);
 		goto exit;
 	}
 
@@ -94,10 +97,10 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
 	sr_data->senn_mod = 0x1;
 	sr_data->senp_mod = 0x1;
 
-	sr_data->voltdm = voltdm_lookup(oh->vdd_name);
+	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
 	if (IS_ERR(sr_data->voltdm)) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, oh->vdd_name);
+			__func__, sr_dev_attr->sensor_voltdm_name);
 		goto exit;
 	}
 
arch/arm/plat-omap/include/plat/omap_hwmod.h +0 -2
index 6470101..9e8e63d 100644
@@ -484,7 +484,6 @@ struct omap_hwmod_class {
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
  * @opt_clks: other device clocks that drivers can request (0..*)
- * @vdd_name: voltage domain name
  * @voltdm: pointer to voltage domain (filled in at runtime)
  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
@@ -528,7 +527,6 @@ struct omap_hwmod {
 	struct omap_hwmod_opt_clk	*opt_clks;
 	char				*clkdm_name;
 	struct clockdomain		*clkdm;
-	char				*vdd_name;
 	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;
Signature · 1 line
1.7.5.4
#2 lore raw

PATCH v4 1/14 ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]

Quoted 12 lines · Jean Pihet

From: Shweta Gulati <[email protected]>

To set sr ntarget values for all volt_domain, volt_table is retrieved by doing a look_up of 'vdd_name' field from omap_hwmod but voltage domain pointer does not belong to omap_hwmod and is not used anywhere else. As a part of voltage layer and SR Layer clean up volt pointer is removed from omap_hwmod and added in dev attributes of SR.

Tested on OMAP3630 SDP and OMAP4430 SDP Board

Quoted 7 lines
[nm at ti.com: minor modifications in sequence and GPU support]

Acked by: Nishanth Menon <[email protected]>

Cc Benoit Cousson <[email protected]>
Cc Paul Walmsley <[email protected]>

Patch contents look fine, but his one needs a better subject.

Kevin

author
#3 lore raw

PATCH v4 2/14 ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence

In reply to Jean Pihet

From: Nishanth Menon <[email protected]>

sr_modify_mask takes mask, value as parameters, the usage currently is value, mask which is wrong, as a result vpboundint_st which was supposed to have been disabled, does not get disabled.

---
 arch/arm/mach-omap2/smartreflex.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/smartreflex.c +2 -2
index 7e755bb..ee224df 100644
@@ -447,8 +447,8 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
 		sr_errconfig);
 
 	/* Enabling the interrupts if the ERROR module is used */
-	sr_modify_reg(sr, errconfig_offs,
-		vpboundint_en, (vpboundint_en | vpboundint_st));
+	sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
+		      vpboundint_en);
 
 	return 0;
 }
Signature · 1 line
1.7.5.4
author
#4 lore raw

PATCH v4 3/14 ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP

In reply to Jean Pihet

From: Nishanth Menon <[email protected]>

SmartReflex AVS Errorgen module supplies signals to Voltage Processor. It is suggested that by disabling Errorgen module before we disable VP, we might be able to ensure lesser chances of race condition to occur in the system.

---
 arch/arm/mach-omap2/smartreflex-class3.c |    1 +
 arch/arm/mach-omap2/smartreflex.c        |   44 ++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/smartreflex.h        |    1 +
 3 files changed, 46 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/smartreflex-class3.c +1 -0
index 53d9d0a..955566e 100644
@@ -29,6 +29,7 @@ static int sr_class3_enable(struct voltagedomain *voltdm)
 
 static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
 {
+	sr_disable_errgen(voltdm);
 	omap_vp_disable(voltdm);
 	sr_disable(voltdm);
 	if (is_volt_reset)
arch/arm/mach-omap2/smartreflex.c +44 -0

50 lines not on this page · raw message

arch/arm/mach-omap2/smartreflex.h +1 -0
index fd61498..5809141 100644
@@ -240,6 +240,7 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
 int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
 void sr_disable(struct voltagedomain *voltdm);
 int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_disable_errgen(struct voltagedomain *voltdm);
 int sr_configure_minmax(struct voltagedomain *voltdm);
 
 /* API to register the smartreflex class driver with the smartreflex driver */
Signature · 1 line
1.7.5.4
author
#5 lore raw

PATCH v4 4/14 ARM: OMAP3+: SmartReflex: Add a shutdown hook

In reply to Jean Pihet

From: Nishanth Menon <[email protected]>

SmartReflex fix for erratum ID i724.

Since OMAP's VP and PRM modules do not get reset by warm reset, we should ensure that proper shutdown procedure is followed prior to allowing the kernel to reboot back up.

Without this patch, Smartreflex module might be left active or system might be caught in an indeterminate sequence when reboot is triggered, leaving the next reboot behavior to be unpredictable.

---
 arch/arm/mach-omap2/smartreflex.c |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/smartreflex.c +24 -0
index ec2b0e7..9c39484 100644
@@ -1055,8 +1055,32 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void __devexit omap_sr_shutdown(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (IS_ERR(sr_info)) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return;
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+
+	return;
+}
+
 static struct platform_driver smartreflex_driver = {
 	.remove         = omap_sr_remove,
+	.shutdown	= __devexit_p(omap_sr_shutdown),
 	.driver		= {
 		.name	= "smartreflex",
 	},
Signature · 1 line
1.7.5.4
#6 lore raw

PATCH v4 4/14 ARM: OMAP3+: SmartReflex: Add a shutdown hook

Quoted 7 lines · Jean Pihet

From: Nishanth Menon <[email protected]>

SmartReflex fix for erratum ID i724.

Since OMAP's VP and PRM modules do not get reset by warm reset, we should ensure that proper shutdown procedure is followed prior to allowing the kernel to reboot back up.

prior to reboot? how?

This patch only ensures a proper shutdown if the kernel goes down cleanly.

How is this handled on reboot?

Kevin

Quoted 47 lines

Without this patch, Smartreflex module might be left active or system might be caught in an indeterminate sequence when reboot is triggered, leaving the next reboot behavior to be unpredictable.

---
 arch/arm/mach-omap2/smartreflex.c |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/smartreflex.c +24 -0
index ec2b0e7..9c39484 100644
@@ -1055,8 +1055,32 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void __devexit omap_sr_shutdown(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (IS_ERR(sr_info)) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return;
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+
+	return;
+}
+
 static struct platform_driver smartreflex_driver = {
 	.remove         = omap_sr_remove,
+	.shutdown	= __devexit_p(omap_sr_shutdown),
 	.driver		= {
 		.name	= "smartreflex",
 	},
#7 lore raw

PATCH 4/14 ARM: OMAP3+: SmartReflex: Add a shutdown hook

Quoted 10 lines · Kevin Hilman
Quoted 7 lines · Jean Pihet

From: Nishanth Menon <[email protected]>

SmartReflex fix for erratum ID i724.

Since OMAP's VP and PRM modules do not get reset by warm reset, we should ensure that proper shutdown procedure is followed prior to allowing the kernel to reboot back up.

Quoted 6 lines

prior to reboot? ?how?

This patch only ensures a proper shutdown if the kernel goes down cleanly.

How is this handled on reboot?

There is no known solution for watchdog resets(part of the errata WA limitation) :( - the best we could do was to make shutdown path safe - this includes s/w (userspace triggered) reboots.

Regards,
Nishanth Menon

#8 lore raw

PATCH v4 4/14 ARM: OMAP3+: SmartReflex: Add a shutdown hook

Quoted 13 lines · Nishanth
Quoted 12 lines · Kevin Hilman
Quoted 7 lines · Jean Pihet

From: Nishanth Menon <[email protected]>

SmartReflex fix for erratum ID i724.

Since OMAP's VP and PRM modules do not get reset by warm reset, we should ensure that proper shutdown procedure is followed prior to allowing the kernel to reboot back up.

prior to reboot? ?how?

Quoted 7 lines
Quoted 4 lines

This patch only ensures a proper shutdown if the kernel goes down cleanly.

How is this handled on reboot?

There is no known solution for watchdog resets(part of the errata WA limitation) :( - the best we could do was to make shutdown path safe - this includes s/w (userspace triggered) reboots.

OK, then the changelog needs an update to reflect that.

Kevin

author
#9 lore raw

PATCH v4 4/14 ARM: OMAP3+: SmartReflex: Add a shutdown hook

Quoted 18 lines · Kevin Hilman
Quoted 16 lines · Nishanth
Quoted 15 lines · Kevin Hilman
Quoted 7 lines · Jean Pihet

From: Nishanth Menon <[email protected]>

SmartReflex fix for erratum ID i724.

Since OMAP's VP and PRM modules do not get reset by warm reset, we should ensure that proper shutdown procedure is followed prior to allowing the kernel to reboot back up.

prior to reboot? ?how?

This patch only ensures a proper shutdown if the kernel goes down cleanly.

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

How is this handled on reboot?

There is no known solution for watchdog resets(part of the errata WA limitation) :( - the best we could do was to make shutdown path safe - this includes s/w (userspace triggered) reboots.

OK, then the changelog needs an update to reflect that.

Just resent patch 04/13 with the update changelog.

Quoted 2 lines

Kevin

Jean

author
#10 lore raw

PATCH v4 5/14 ARM: OMAP3+: SmartReflex: use __devexit_p annotation

In reply to Jean Pihet

Use __devexit_p() in struct platform_driver for functions that are defined with __devexit.

---
 arch/arm/mach-omap2/smartreflex.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/smartreflex.c +1 -1
index 9c39484..24ba80b 100644
@@ -1079,7 +1079,7 @@ static void __devexit omap_sr_shutdown(struct platform_device *pdev)
 }
 
 static struct platform_driver smartreflex_driver = {
-	.remove         = omap_sr_remove,
+	.remove         = __devexit_p(omap_sr_remove),
 	.shutdown	= __devexit_p(omap_sr_shutdown),
 	.driver		= {
 		.name	= "smartreflex",
Signature · 1 line
1.7.5.4
author
#11 lore raw

PATCH v4 6/14 ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register

In reply to Jean Pihet

From: Nishanth Menon <[email protected]>

ERRCONFIG register has status bits that were intended not to be destroyed by bad modification. We cleanup and simplify the handling the status in the modify path.

---
 arch/arm/mach-omap2/smartreflex.c |   21 ++++++++-------------
 1 files changed, 8 insertions(+), 13 deletions(-)
arch/arm/mach-omap2/smartreflex.c +8 -13
index 24ba80b..f2f2f2a 100644
@@ -74,10 +74,6 @@ static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
 					u32 value)
 {
 	u32 reg_val;
-	u32 errconfig_offs = 0, errconfig_mask = 0;
-
-	reg_val = __raw_readl(sr->base + offset);
-	reg_val &= ~mask;
 
 	/*
 	 * Smartreflex error config register is special as it contains
@@ -88,16 +84,15 @@ static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
 	 * if they are currently set, but does allow the caller to write
 	 * those bits.
 	 */
-	if (sr->ip_type == SR_TYPE_V1) {
-		errconfig_offs = ERRCONFIG_V1;
-		errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
-	} else if (sr->ip_type == SR_TYPE_V2) {
-		errconfig_offs = ERRCONFIG_V2;
-		errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
-	}
+	if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
+		mask |= ERRCONFIG_STATUS_V1_MASK;
+	else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
+		mask |= ERRCONFIG_VPBOUNDINTST_V2;
+
+	reg_val = __raw_readl(sr->base + offset);
+	reg_val &= ~mask;
 
-	if (offset == errconfig_offs)
-		reg_val &= ~errconfig_mask;
+	value &= mask;
 
 	reg_val |= value;
 
Signature · 1 line
1.7.5.4
author
#12 lore raw

PATCH v4 7/14 ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need

In reply to Jean Pihet

From: Nishanth Menon <[email protected]>

The VPBOUNDINTST field of the ERRCONFIG register has an additional functional meaning of force clearing the SR internal signal with VP (sr_interruptz).
This can result in scenarios where the VP->SR protocol is violated because the SR internal signal with VP is already high and VP will never clear the vpirqclr signal.
Therefore during the next force update to reset to nominal voltage, VP cannot pulse vpirqclr, so the PRCM HW cannot generate the tranxdone IRQ and the situation is not recoverable until a cold reset is invoked.

To prevent this situation, check if status is set before clearing it as this needs to be done only on a need basis.

---
 arch/arm/mach-omap2/smartreflex.c |   22 ++++++++++++++++------
 1 files changed, 16 insertions(+), 6 deletions(-)
arch/arm/mach-omap2/smartreflex.c +16 -6
index f2f2f2a..64d3ca7 100644
@@ -289,6 +289,8 @@ error:
 static void sr_v1_disable(struct omap_sr *sr)
 {
 	int timeout = 0;
+	int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+			ERRCONFIG_MCUBOUNDINTST;
 
 	/* Enable MCUDisableAcknowledge interrupt */
 	sr_modify_reg(sr, ERRCONFIG_V1,
@@ -297,13 +299,13 @@ static void sr_v1_disable(struct omap_sr *sr)
 	/* SRCONFIG - disable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
 
-	/* Disable all other SR interrupts and clear the status */
+	/* Disable all other SR interrupts and clear the status as needed */
+	if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
+		errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
 	sr_modify_reg(sr, ERRCONFIG_V1,
 			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
 			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
-			(ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
-			ERRCONFIG_MCUBOUNDINTST |
-			ERRCONFIG_VPBOUNDINTST_V1));
+			errconf_val);
 
 	/*
 	 * Wait for SR to be disabled.
@@ -332,9 +334,17 @@ static void sr_v2_disable(struct omap_sr *sr)
 	/* SRCONFIG - disable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
 
-	/* Disable all other SR interrupts and clear the status */
-	sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+	/*
+	 * Disable all other SR interrupts and clear the status
+	 * write to status register ONLY on need basis - only if status
+	 * is set.
+	 */
+	if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
+		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
 			ERRCONFIG_VPBOUNDINTST_V2);
+	else
+		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+				0x0);
 	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
 			IRQENABLE_MCUVALIDINT |
 			IRQENABLE_MCUBOUNDSINT));
Signature · 1 line
1.7.5.4
author
#13 lore raw

PATCH v4 8/14 ARM: OMAP3+: hwmod: add SmartReflex IRQs

In reply to Jean Pihet

From: Nishanth Menon <[email protected]>

OMAP3 SmartReflex IRQs in hwmod structures with the same naming as present in OMAP4. Without these IRQs being registered, SmartReflex driver will be unable to get the IRQ numbers to handle notifications

---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +14 -0
index 8688960..eef31cb 100644
@@ -377,6 +377,16 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
+	{ .name = "sr1_irq", .irq = 18},
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
+	{ .name = "sr2_irq", .irq = 19},
+	{ .irq = -1 }
+};
+
 /* L4 CORE -> SR1 interface */
 static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
 	{
@@ -2689,6 +2699,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
 	.dev_attr	= &sr1_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2708,6 +2719,7 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
 	.dev_attr	= &sr1_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 };
 
 /* SR2 */
@@ -2735,6 +2747,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
 	.dev_attr	= &sr2_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_core_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2754,6 +2767,7 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
 	.dev_attr	= &sr2_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_core_irqs,
 };
 
 /*
Signature · 1 line
1.7.5.4
#14 lore raw

PATCH v4 8/14 ARM: OMAP3+: hwmod: add SmartReflex IRQs

Quoted 19 lines · Jean Pihet

From: Nishanth Menon <[email protected]>

OMAP3 SmartReflex IRQs in hwmod structures with the same naming as present in OMAP4. Without these IRQs being registered, SmartReflex driver will be unable to get the IRQ numbers to handle notifications

---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +0 -0
index 8688960..eef31cb 100644
@@ -377,6 +377,16 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { · line 388

Quoted 10 lines
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +9 -0
 
+static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
+	{ .name = "sr1_irq", .irq = 18},
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
+	{ .name = "sr2_irq", .irq = 19},
+	{ .irq = -1 }
+};

minor: I don't think the .name field is required here since there's only one, and the driver does not use get_resource_by_name().

Kevin

Quoted 35 lines
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +4 -0
 /* L4 CORE -> SR1 interface */
 static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
 	{
@@ -2689,6 +2699,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
 	.dev_attr	= &sr1_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2708,6 +2719,7 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 	.slaves		= omap3_sr1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
 	.dev_attr	= &sr1_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 };
 
 /* SR2 */
@@ -2735,6 +2747,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
 	.dev_attr	= &sr2_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_core_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -2754,6 +2767,7 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 	.slaves		= omap3_sr2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
 	.dev_attr	= &sr2_dev_attr,
+	.mpu_irqs	= omap3_smartreflex_core_irqs,
 };
 
 /*
author
#15 lore raw

PATCH v4 9/14 ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()

In reply to Jean Pihet

From: Felipe Balbi <[email protected]>

That's very useful to fetch the correct struct sr_info from the PM handlers.

---
 arch/arm/mach-omap2/smartreflex.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/smartreflex.c +2 -0
index 64d3ca7..b5dc109 100644
@@ -888,6 +888,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	platform_set_drvdata(pdev, sr_info);
+
 	if (!pdata) {
 		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
 		ret = -EINVAL;
Signature · 1 line
1.7.5.4
author
#16 lore raw

PATCH v4 10/14 ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument

In reply to Jean Pihet

From: Felipe Balbi <[email protected]>

no functional changes, trivial patch.

---
 arch/arm/mach-omap2/smartreflex.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/smartreflex.c +1 -1
index b5dc109..72fe4d1 100644
@@ -1117,12 +1117,12 @@ static int __init sr_init(void)
 
 	return 0;
 }
+late_initcall(sr_init);
 
 static void __exit sr_exit(void)
 {
 	platform_driver_unregister(&smartreflex_driver);
 }
-late_initcall(sr_init);
 module_exit(sr_exit);
 
 MODULE_DESCRIPTION("OMAP Smartreflex Driver");
Signature · 1 line
1.7.5.4
author
#17 lore raw

PATCH v4 11/14 ARM: OMAP3+: SmartReflex: misc cleanups

In reply to Jean Pihet

From: Felipe Balbi <[email protected]>

There are no functional changes here, only misc cleanups in general:
- re-organize variable declarations,
- converting if {} else if {} else {} into switch statements,
- correct comments typos,
- add/remove white lines to improve readability,
- etc.

---
 arch/arm/mach-omap2/smartreflex.c |  100 +++++++++++++++++++++++++------------
 1 files changed, 67 insertions(+), 33 deletions(-)
arch/arm/mach-omap2/smartreflex.c +67 -33
index 72fe4d1..f1db4c6 100644
@@ -36,6 +36,12 @@
 #define SR_DISABLE_TIMEOUT	200
 
 struct omap_sr {
+	struct list_head		node;
+	struct platform_device		*pdev;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+	struct dentry			*dbg_dir;
+	unsigned int			irq;
 	int				srid;
 	int				ip_type;
 	int				nvalue_count;
@@ -49,13 +55,7 @@ struct omap_sr {
 	u32				senp_avgweight;
 	u32				senp_mod;
 	u32				senn_mod;
-	unsigned int			irq;
 	void __iomem			*base;
-	struct platform_device		*pdev;
-	struct list_head		node;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-	struct dentry			*dbg_dir;
 };
 
 /* sr_list contains all the instances of smartreflex module */
@@ -123,21 +123,28 @@ static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
 
 static irqreturn_t sr_interrupt(int irq, void *data)
 {
-	struct omap_sr *sr_info = (struct omap_sr *)data;
+	struct omap_sr *sr_info = data;
 	u32 status = 0;
 
-	if (sr_info->ip_type == SR_TYPE_V1) {
+	switch (sr_info->ip_type) {
+	case SR_TYPE_V1:
 		/* Read the status bits */
 		status = sr_read_reg(sr_info, ERRCONFIG_V1);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
-	} else if (sr_info->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		/* Read the status bits */
 		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);
+		break;
+	default:
+		dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
+			sr_info->ip_type);
+		return IRQ_NONE;
 	}
 
 	if (sr_class->notify)
@@ -161,6 +168,7 @@ static void sr_set_clk_length(struct omap_sr *sr)
 			__func__);
 		return;
 	}
+
 	sys_clk_speed = clk_get_rate(sys_ck);
 	clk_put(sys_ck);
 
@@ -262,7 +270,7 @@ static int sr_late_init(struct omap_sr *sr_info)
 			goto error;
 		}
 		ret = request_irq(sr_info->irq, sr_interrupt,
-				0, name, (void *)sr_info);
+				0, name, sr_info);
 		if (ret)
 			goto error;
 		disable_irq(sr_info->irq);
@@ -283,6 +291,7 @@ error:
 		"not function as desired\n", __func__);
 	kfree(name);
 	kfree(sr_info);
+
 	return ret;
 }
 
@@ -403,8 +412,9 @@ static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
  */
 int sr_configure_errgen(struct voltagedomain *voltdm)
 {
-	u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
-	u32 vpboundint_st, senp_en = 0, senn_en = 0;
+	u32 sr_config, sr_errconfig, errconfig_offs;
+	u32 vpboundint_en, vpboundint_st;
+	u32 senp_en = 0, senn_en = 0;
 	u8 senp_shift, senn_shift;
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
@@ -423,20 +433,23 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
 	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
 		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
 
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		sr_config |= SRCONFIG_DELAYCTRL;
 		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
 		errconfig_offs = ERRCONFIG_V1;
 		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
 		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
 		errconfig_offs = ERRCONFIG_V2;
 		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
 		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-	} else {
+		break;
+	default:
 		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
 			"module without specifying the ip\n", __func__);
 		return -EINVAL;
@@ -469,8 +482,8 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
  */
 int sr_disable_errgen(struct voltagedomain *voltdm)
 {
-	u32 errconfig_offs, vpboundint_en;
-	u32 vpboundint_st;
+	u32 errconfig_offs;
+	u32 vpboundint_en, vpboundint_st;
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
@@ -479,15 +492,18 @@ int sr_disable_errgen(struct voltagedomain *voltdm)
 		return -EINVAL;
 	}
 
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		errconfig_offs = ERRCONFIG_V1;
 		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
 		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		errconfig_offs = ERRCONFIG_V2;
 		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
 		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-	} else {
+		break;
+	default:
 		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
 			"module without specifying the ip\n", __func__);
 		return -EINVAL;
@@ -537,14 +553,17 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 		SRCONFIG_SENENABLE |
 		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
 
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		sr_config |= SRCONFIG_DELAYCTRL;
 		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
 		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-	} else {
+		break;
+	default:
 		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
 			"module without specifying the ip\n", __func__);
 		return -EINVAL;
@@ -560,20 +579,27 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 	 * Enabling the interrupts if MINMAXAVG module is used.
 	 * TODO: check if all the interrupts are mandatory
 	 */
-	if (sr->ip_type == SR_TYPE_V1) {
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
 		sr_modify_reg(sr, ERRCONFIG_V1,
 			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
 			ERRCONFIG_MCUBOUNDINTEN),
 			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
 			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
 			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
-	} else if (sr->ip_type == SR_TYPE_V2) {
+		break;
+	case SR_TYPE_V2:
 		sr_write_reg(sr, IRQSTATUS,
 			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
 			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
 		sr_write_reg(sr, IRQENABLE_SET,
 			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
 			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
 	}
 
 	return 0;
@@ -592,9 +618,9 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
  */
 int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 {
-	u32 nvalue_reciprocal;
 	struct omap_volt_data *volt_data;
 	struct omap_sr *sr = _sr_lookup(voltdm);
+	u32 nvalue_reciprocal;
 	int ret;
 
 	if (IS_ERR(sr)) {
@@ -666,10 +692,17 @@ void sr_disable(struct voltagedomain *voltdm)
 	 * disable the clocks.
 	 */
 	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
-		if (sr->ip_type == SR_TYPE_V1)
+		switch (sr->ip_type) {
+		case SR_TYPE_V1:
 			sr_v1_disable(sr);
-		else if (sr->ip_type == SR_TYPE_V2)
+			break;
+		case SR_TYPE_V2:
 			sr_v2_disable(sr);
+			break;
+		default:
+			dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
+				sr->ip_type);
+		}
 	}
 
 	pm_runtime_put_sync_suspend(&sr->pdev->dev);
@@ -828,10 +861,10 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
 	sr_pmic_data = pmic_data;
 }
 
-/* PM Debug Fs enteries to enable disable smartreflex. */
+/* PM Debug FS entries to enable and disable smartreflex. */
 static int omap_sr_autocomp_show(void *data, u64 *val)
 {
-	struct omap_sr *sr_info = (struct omap_sr *) data;
+	struct omap_sr *sr_info = data;
 
 	if (!sr_info) {
 		pr_warning("%s: omap_sr struct not found\n", __func__);
@@ -845,7 +878,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
 
 static int omap_sr_autocomp_store(void *data, u64 val)
 {
-	struct omap_sr *sr_info = (struct omap_sr *) data;
+	struct omap_sr *sr_info = data;
 
 	if (!sr_info) {
 		pr_warning("%s: omap_sr struct not found\n", __func__);
@@ -870,11 +903,11 @@ static int omap_sr_autocomp_store(void *data, u64 val)
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
-		omap_sr_autocomp_store, "%llu\n");
+			omap_sr_autocomp_store, "%llu\n");
 
 static int __init omap_sr_probe(struct platform_device *pdev)
 {
-	struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
+	struct omap_sr *sr_info;
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
 	struct resource *mem, *irq;
 	struct dentry *nvalue_dir;
@@ -882,6 +915,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	int i, ret = 0;
 	char *name;
 
+	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
 	if (!sr_info) {
 		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
 			__func__);
Signature · 1 line
1.7.5.4
author
#18 lore raw

PATCH v4 12/14 ARM: OMAP3+: SmartReflex: micro-optimization for sanity check

In reply to Jean Pihet

From: Felipe Balbi <[email protected]>

val && (val != 1) == val > 1

---
 arch/arm/mach-omap2/smartreflex.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/smartreflex.c +1 -1
index f1db4c6..daf8053 100644
@@ -886,7 +886,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
 	}
 
 	/* Sanity check */
-	if (val && (val != 1)) {
+	if (val > 1) {
 		pr_warning("%s: Invalid argument %lld\n", __func__, val);
 		return -EINVAL;
 	}
Signature · 1 line
1.7.5.4
author
#19 lore raw

PATCH v4 13/14 ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API

In reply to Jean Pihet

The debugfs_create_* API returns a return code or NULL in the return ptr in case of problem.
Fix the smartreflex code to take this into account.

---
 arch/arm/mach-omap2/smartreflex.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-omap2/smartreflex.c +3 -3
index daf8053..f6b8f45 100644
@@ -989,7 +989,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
 	if (!sr_dbg_dir) {
 		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
-		if (!sr_dbg_dir) {
+		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
 			ret = PTR_ERR(sr_dbg_dir);
 			pr_err("%s:sr debugfs dir creation failed(%d)\n",
 				__func__, ret);
@@ -1006,7 +1006,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	}
 	sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
 	kfree(name);
-	if (IS_ERR(sr_info->dbg_dir)) {
+	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
 		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
 			__func__);
 		ret = PTR_ERR(sr_info->dbg_dir);
@@ -1023,7 +1023,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 			&sr_info->err_minlimit);
 
 	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
-	if (IS_ERR(nvalue_dir)) {
+	if (IS_ERR_OR_NULL(nvalue_dir)) {
 		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
 			"for n-values\n", __func__);
 		ret = PTR_ERR(nvalue_dir);
Signature · 1 line
1.7.5.4
author
#20 lore raw

PATCH v4 14/14 ARM: OMAP3+: SmartReflex: fix error handling

In reply to Jean Pihet

Fix the code to correctly use IS_ERR and PTR_ERR on the return values pointers

---
 arch/arm/mach-omap2/smartreflex.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/mach-omap2/smartreflex.c +6 -6
index f6b8f45..008fbd7 100644
@@ -421,7 +421,7 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	if (!sr->clk_length)
@@ -489,7 +489,7 @@ int sr_disable_errgen(struct voltagedomain *voltdm)
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	switch (sr->ip_type) {
@@ -540,7 +540,7 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	if (!sr->clk_length)
@@ -626,7 +626,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 	if (IS_ERR(sr)) {
 		pr_warning("%s: omap_sr struct for sr_%s not found\n",
 			__func__, voltdm->name);
-		return -EINVAL;
+		return PTR_ERR(sr);
 	}
 
 	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
@@ -634,7 +634,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 	if (IS_ERR(volt_data)) {
 		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
 			"for nominal voltage %ld\n", __func__, volt);
-		return -ENODATA;
+		return PTR_ERR(volt_data);
 	}
 
 	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
@@ -1079,7 +1079,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 	if (IS_ERR(sr_info)) {
 		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
 			__func__);
-		return -EINVAL;
+		return PTR_ERR(sr_info);
 	}
 
 	if (sr_info->autocomp_active)
Signature · 1 line
1.7.5.4
#21 lore raw

v4 cover ARM: OMAP3+: SmartReflex: bugfixes and clean-ups

In reply to Jean Pihet

Hi Jean,

Quoted 2 lines · Jean Pihet

Integrate the latest SmartReflex bufixes from Felipe Balbi [1] and Nishant Menon [2], plus misc bugfixesi and minor clean-ups.

Sorry for the delay on this series. I had a couple minor comments,
and after that it looks ready for v3.4 as a cleanup series.

While updating, can you rebase to v3.3-rc4?

Thanks,

Kevin