davinci: Initial support for MityDSP-L138/MityARM-1808
Subsystems (3)
PATCH v2 1/1 davinci: Initial support for MityDSP-L138/MityARM-1808
This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system on Module (SOM) under the machine name "mityomapl138". These SOMs are based on the da850 davinci CPU architecture. Information on these SOMs may be found at http://www.mitydsp.com.
Basic support for the console UART, NAND, and EMAC (MII interface) is included in this patch.
---
Changes since v1:
1) Split out defconfig changes to separate patch.
2) Split out console init changes to DA8XX EVMS to separate patch.
3) Change a pr_info() to a pr_debug().
arch/arm/mach-davinci/Kconfig | 9 + arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/board-mityomapl138.c | 220 +++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/uncompress.h | 1 + 4 files changed, 231 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-davinci/board-mityomapl138.c
arch/arm/mach-davinci/Kconfig +9 -0
@@ -185,6 +185,15 @@ config MACH_TNETV107X help Say Y here to select the TI TNETV107X Evaluation Module. +config MACH_MITYOMAPL138 + bool "Critical Link MityDSP-L138/MityARM-1808 SoM" + default ARCH_DAVINCI_DA850 + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 + System on Module. Information on this SoM may be found at + http://www.mitydsp.com + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI
arch/arm/mach-davinci/Makefile +1 -0
@@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o +obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o # Power Management obj-$(CONFIG_CPU_FREQ) += cpufreq.o
arch/arm/mach-davinci/board-mityomapl138.c new file +220 -0
220 lines not on this page · raw message
arch/arm/mach-davinci/include/mach/uncompress.h +1 -0
@@ -88,6 +88,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)/* DA8xx boards */ DEBUG_LL_DA8XX (davinci_da830_evm,2 );DEBUG_LL_DA8XX (davinci_da850_evm,2 ); +DEBUG_LL_DA8XX (mityomapl138,1 );/* TNETV107x boards */ DEBUG_LL_TNETV107X (tnetv107x,1 );
Signature · 1 line
1.7.0.4
PATCH v2 1/1 davinci: Initial support for MityDSP-L138/MityARM-1808
Quoted 9 lines · Michael Williamson
This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system on Module (SOM) under the machine name "mityomapl138". These SOMs are based on the da850 davinci CPU architecture. Information on these SOMs may be found at http://www.mitydsp.com.
Basic support for the console UART, NAND, and EMAC (MII interface) is included in this patch.
Signed-off-by Michael Williamson <[email protected]>
Looks good, one comple very minor things left...
Quoted 18 lines
---
Changes since v1:
1) Split out defconfig changes to separate patch.
2) Split out console init changes to DA8XX EVMS to separate patch.
3) Change apr_info()to apr_debug().arch/arm/mach-davinci/Kconfig | 9 + arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/board-mityomapl138.c | 220 +++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/uncompress.h | 1 + 4 files changed, 231 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-davinci/board-mityomapl138.carch/arm/mach-davinci/Kconfig +0
-0
arch/arm/mach-davinci/Kconfig config MACH_TNETV107X · line 190
Quoted 6 lines
arch/arm/mach-davinci/Kconfig +3
-0@@ -185,6 +185,15 @@ config MACH_TNETV107X help Say Y here to select the TI TNETV107X Evaluation Module. +config MACH_MITYOMAPL138 + bool "Critical Link MityDSP-L138/MityARM-1808 SoM" + default ARCH_DAVINCI_DA850
We have a (admittedly arbitrary) policy of only enabling the official EVM boards in the Kconfig. However, feel free to enable your board by default in da8xx_omapl_defconfig.
Quoted 69 lines
arch/arm/mach-davinci/Kconfig +6
-0+ depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 + System on Module. Information on this SoM may be found at + http://www.mitydsp.com + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCIarch/arm/mach-davinci/Makefile +1
-0@@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o +obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o # Power Management obj-$(CONFIG_CPU_FREQ) += cpufreq.oarch/arm/mach-davinci/board-mityomapl138.c new file +42
-0@@ -0,0 +1,220 @@ +/* +* Critical Link MityOMAP-L138 SoM +* +* Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com +* +* This file is licensed under the terms of the GNU General Public License +* version 2. This program is licensed "as is" without any warranty of +* any kind, whether express or implied. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> +#include <mach/nand.h> +#include <mach/mux.h> + +#define MITYOMAPL138_PHY_MASK 0x08/* hardcoded for now */ +#define MITYOMAPL138_MDIO_FREQUENCY (2200000)/* PHY bus frequency */ + +/* +* MityDSP-L138 includes a 256 MByte large-page NAND flash +* (128K blocks). +*/ +struct mtd_partition mityomapl138_nandflash_partition[] = { + { + .name ="rootfs" , + .offset =0 , + .size =SZ_128M , + .mask_flags =0 ,/* MTD_WRITEABLE, */ + }, + { + .name ="homefs" , + .offset =MTDPART_OFS_APPEND , + .size =MTDPART_SIZ_FULL ,
arch/arm/mach-davinci/board-mityomapl138.c line 52
Quoted 10 lines
arch/arm/mach-davinci/board-mityomapl138.c new file +10
-0+ .mask_flags = 0, + }, +}; + +static struct davinci_nand_pdata mityomapl138_nandflash_data = { + .parts = mityomapl138_nandflash_partition, + .nr_parts =ARRAY_SIZE (mityomapl138_nandflash_partition), + .ecc_mode =NAND_ECC_HW , + .options =NAND_USE_FLASH_BBT |NAND_BUSWIDTH_16 , + .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
Missing a tab in this list line for alignment.
[...]
Kevin