Skip to contentSkip to conversation

Update Documentation/devices.txt

PATCH In review Peter Korsgaard 6 participants 15 messages Aug 22, 2006 – Aug 23, 2006 Documentation

lore
Share & tools
lore

Peter Korsgaard

author
#0 lore raw

PATCH 1/1 Update Documentation/devices.txt

Hi,

Sync Documentation/devices.txt with the new version from the LANANA site (http://www.lanana.org/docs/device-list/devices-2.6+.txt)

Signed-off-by Peter Korsgaard <[email protected]>
Documentation/devices.txt +17 -14
diff -urpN linux-2.6.18-rc4.orig/Documentation/devices.txt linux-2.6.18-rc4/Documentation/devices.txt
@@ -3,7 +3,7 @@
 
 	     Maintained by Torben Mathiasen <[email protected]>
 
-		      Last revised: 15 May 2006
+		      Last revised: 21 August 2006
 
 This list is the Linux Device List, the official registry of allocated
 device numbers and /dev directory nodes for the Linux operating

@@ -1522,7 +1522,7 @@ Your cooperation is appreciated.
 		disks (see major number 3) except that the limit on
 		partitions is 15.
 
- 83 char	Matrox mga_vid video driver
+ 83 char	Matrox mga_vid video driver 
  		 0 = /dev/mga_vid0	1st video card
 		 1 = /dev/mga_vid1	2nd video card
 		 2 = /dev/mga_vid2	3rd video card

@@ -1731,7 +1731,7 @@ Your cooperation is appreciated.
 		  0 = /dev/ubda		First user-mode block device
 		 16 = /dev/udbb		Second user-mode block device
 		    ...
-
+		
 		Partitions are handled in the same way as for IDE
 		disks (see major number 3) except that the limit on
 		partitions is 15.

@@ -2305,7 +2305,7 @@ Your cooperation is appreciated.
 		  0 = /dev/drbd0	First DRBD device
 		  1 = /dev/drbd1	Second DRBD device
 		    ...
-
+		
 148 char	Technology Concepts serial card
 		  0 = /dev/ttyT0	First TCL port
 		  1 = /dev/ttyT1	Second TCL port

@@ -2565,10 +2565,10 @@ Your cooperation is appreciated.
 		243 = /dev/usb/dabusb3	Fourth dabusb device
 
 180 block	USB block devices
-		  0 = /dev/uba		First USB block device
-		  8 = /dev/ubb		Second USB block device
-		 16 = /dev/ubc		Third USB block device
-		    ...
+		0 = /dev/uba		First USB block device
+		8 = /dev/ubb		Second USB block device
+		16 = /dev/ubc		Third USB block device
+ 		    ...
 
 181 char	Conrad Electronic parallel port radio clocks
 		  0 = /dev/pcfclock0	First Conrad radio clock

@@ -2767,7 +2767,7 @@ Your cooperation is appreciated.
 		 42 = /dev/ttySMX1		Motorola i.MX - port 1
 		 43 = /dev/ttySMX2		Motorola i.MX - port 2
 		 44 = /dev/ttyMM0		Marvell MPSC - port 0
-		 45 = /dev/ttyMM1		Marvell MPSC - port 1
+		 45 = /dev/ttyMM1		Marvell MPSC - port 1	
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
 		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5

@@ -2792,6 +2792,9 @@ Your cooperation is appreciated.
 		    ...
 		 185 = /dev/ttyNX15		Hilscher netX serial port 15
 		 186 = /dev/ttyJ0		JTAG1 DCC protocol based serial port emulation
+		 187 = /dev/ttyUL0		Xilinx uartlite - port 0
+		    ...
+		 190 = /dev/ttyUL3		Xilinx uartlite - port 3
 
 205 char	Low-density serial ports (alternate device)
 		  0 = /dev/culu0		Callout device for ttyLU0

@@ -3005,11 +3008,11 @@ Your cooperation is appreciated.
 		  2 = /dev/3270/tub2		Second 3270 terminal
 		    ...
 
-229 char	IBM iSeries virtual console
-		  0 = /dev/iseries/vtty0	First console port
-		  1 = /dev/iseries/vtty1	Second console port
+229 char	IBM iSeries/pSeries virtual console
+		  0 = /dev/hvc0			First console port
+		  1 = /dev/hvc1			Second console port
 		    ...
-
+		  
 230 char	IBM iSeries virtual tape
 		  0 = /dev/iseries/vt0		First virtual tape, mode 0
 		  1 = /dev/iseries/vt1		Second virtual tape, mode 0

@@ -3091,7 +3094,7 @@ Your cooperation is appreciated.
 		This major is reserved to assist the expansion to a
 		larger number space.  No device nodes with this major
 		should ever be created on the filesystem.
-		(This is probaly not true anymore, but I'll leave it
+		(This is probaly not true anymore, but I'll leave it 
 		for now /Torben)
 
 ---LARGE MAJORS!!!!!---
Signature · 1 line
Bye, Peter Korsgaard
#1 lore raw

Documentation/devices.txt line 4

Quoted 13 lines · On Tue, 22 Aug 2006 17:08:13 +0200 Peter Korsgaard wrote:

Hi,

Sync Documentation/devices.txt with the new version from the LANANA site (http://www.lanana.org/docs/device-list/devices-2.6+.txt)

Signed-off-by Peter Korsgaard <[email protected]>

diff -urpN linux-2.6.18-rc4.orig/Documentation/devices.txt linux-2.6.18-rc4/Documentation/devices.txt

Documentation/devices.txt +0 -0
@@ -3,7 +3,7 @@
 
 	     Maintained by Torben Mathiasen <[email protected]>

Maybe Torben could update or ack/nack or comment?

Documentation/devices.txt Your cooperation is appreciated. · line 1525

Quoted 6 lines
Documentation/devices.txt +1 -1
@@ -1522,7 +1522,7 @@ Your cooperation is appreciated.
 		disks (see major number 3) except that the limit on
 		partitions is 15.
 
- 83 char	Matrox mga_vid video driver
+ 83 char	Matrox mga_vid video driver

Please don't add trailing whitespace like above.

Documentation/devices.txt Your cooperation is appreciated. · line 1734

Quoted 6 lines
Documentation/devices.txt +1 -1
@@ -1731,7 +1731,7 @@ Your cooperation is appreciated.
 		  0 = /dev/ubda		First user-mode block device
 		 16 = /dev/udbb		Second user-mode block device
...
-
+

More trailing whitespace above.

Documentation/devices.txt Your cooperation is appreciated. · line 2308

Quoted 9 lines
Documentation/devices.txt +1 -1
 		Partitions are handled in the same way as for IDE
 		disks (see major number 3) except that the limit on
 		partitions is 15.

@@ -2305,7 +2305,7 @@ Your cooperation is appreciated.
 		  0 = /dev/drbd0	First DRBD device
 		  1 = /dev/drbd1	Second DRBD device
...
-
+

ditto.

Documentation/devices.txt Your cooperation is appreciated. · line 2770

Quoted 9 lines

148 char Technology Concepts serial card

Documentation/devices.txt +1 -1
 		  0 = /dev/ttyT0	First TCL port
 		  1 = /dev/ttyT1	Second TCL port

@@ -2767,7 +2767,7 @@ Your cooperation is appreciated.
 		 42 = /dev/ttySMX1		Motorola i.MX - port 1
 		 43 = /dev/ttySMX2		Motorola i.MX - port 2
 		 44 = /dev/ttyMM0		Marvell MPSC - port 0
-		 45 = /dev/ttyMM1		Marvell MPSC - port 1
+		 45 = /dev/ttyMM1		Marvell MPSC - port 1

again

Quoted 6 lines
Documentation/devices.txt +0 -0
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
...
 		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5

@@ -3005,11 +3008,11 @@ Your cooperation is appreciated.
 		  2 = /dev/3270/tub2		Second 3270 terminal
...

Documentation/devices.txt Your cooperation is appreciated. · line 3015

Quoted 10 lines
Documentation/devices.txt +4 -4
 
-229 char	IBM iSeries virtual console
-		  0 = /dev/iseries/vtty0	First console port
-		  1 = /dev/iseries/vtty1	Second console port
+229 char	IBM iSeries/pSeries virtual console
+		  0 = /dev/hvc0			First console port
+		  1 = /dev/hvc1			Second console port
...
-
+

again

Documentation/devices.txt Your cooperation is appreciated. · line 3097

Quoted 9 lines

230 char IBM iSeries virtual tape

Documentation/devices.txt +1 -1
 		  0 = /dev/iseries/vt0		First virtual tape, mode 0
 		  1 = /dev/iseries/vt1		Second virtual tape, mode 0

@@ -3091,7 +3094,7 @@ Your cooperation is appreciated.
 		This major is reserved to assist the expansion to a
 		larger number space.  No device nodes with this major
 		should ever be created on the filesystem.
-		(This is probaly not true anymore, but I'll leave it
+		(This is probaly not true anymore, but I'll leave it

whitespace. again.
and s/probaly/probably/

Documentation/devices.txt Your cooperation is appreciated. · line 3098

Quoted 1 line
Documentation/devices.txt +0 -0
 		for now /Torben)

---
~Randy

author
#2 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Randy" == Randy Dunlap <[email protected]> writes:

Hi.

Quoted 1 line
Quoted 1 line

Maintained by Torben Mathiasen <[email protected]>

Randy> Maybe Torben could update or ack/nack or comment?

Yeah - Torben?

Quoted 6 lines
Quoted 6 lines
(quoted diff) +0 -0
@@ -1522,7 +1522,7 @@ Your cooperation is appreciated.

disks (see major number 3) except that the limit on partitions is 15.

- 83 char Matrox mga_vid video driver
+ 83 char Matrox mga_vid video driver

Randy> Please don't add trailing whitespace like above.

I've just taken the file from lanana.org verbatim. I can fix the issues in the patch or try to get Torben to change it on lanana.org, but his turnaround time is pretty slow (took ~3 months for my ttyULx nodes).

Signature · 1 line
Bye, Peter Korsgaard
#3 lore raw
Quoted 6 lines
Quoted 1 line
Quoted 1 line

Maintained by Torben Mathiasen <[email protected]>

I've just taken the file from lanana.org verbatim. I can fix the issues in the patch or try to get Torben to change it on lanana.org, but his turnaround time is pretty slow (took ~3 months for my ttyULx nodes).

If you got a better turnaround time, propose your maintainership. :)

Jan Engelhardt

author
#4 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Jan" == Jan Engelhardt <[email protected]> writes:

Hi,

Quoted 4 lines
Quoted 4 lines

I've just taken the file from lanana.org verbatim. I can fix the issues in the patch or try to get Torben to change it on lanana.org, but his turnaround time is pretty slow (took ~3 months for my ttyULx nodes).

Jan> If you got a better turnaround time, propose your maintainership. :)

No way, I'm not going there ;) Sorry if it sounded offensive.

My point was just that it's probably faster to change the copy in the kernel tree than getting the one on lanana.org updated.

Signature · 1 line
Bye, Peter Korsgaard
#5 lore raw
Quoted 7 lines

Jan> If you got a better turnaround time, propose your maintainership. :)

No way, I'm not going there ;) Sorry if it sounded offensive.

My point was just that it's probably faster to change the copy in the kernel tree than getting the one on lanana.org updated.

Maybe the kernel one should be the official document.

Jan Engelhardt

#6 lore raw
In reply to Peter Korsgaard

Yeah, sorry about the slow turnaround time lately. Hopefully it will better soon :).

Please send me a patch and I'll have it in asap.

Torben

-----Original Message-----
From: Peter Korsgaard [mailto:[email protected]]
Sent: Wednesday, August 23, 2006 8:23 AM
To: Jan Engelhardt
Cc: Randy.Dunlap; [email protected]; [email protected]
Subject: Re: [PATCH] Update Documentation/devices.txt

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Jan" == Jan Engelhardt <[email protected]> writes:

Hi,

Quoted 1 line
Quoted 1 line

I've just taken the file from lanana.org verbatim. I can fix the >> issues in the patch or try to get Torben to change it on lanana.org, >> but his turnaround time is pretty slow (took ~3 months for my ttyULx >> nodes).

Jan> If you got a better turnaround time, propose your maintainership. :)

No way, I'm not going there ;) Sorry if it sounded offensive.

My point was just that it's probably faster to change the copy in the kernel tree than getting the one on lanana.org updated.

Signature · 1 line
Bye, Peter Korsgaard
author
#7 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Torben" == Mathiasen, Torben <[email protected]> writes:

Torben> Yeah, sorry about the slow turnaround time lately. Hopefully it will better soon :). Torben> Please send me a patch and I'll have it in asap.

Ok, here you go:

devices-2.6+.txt renamed from devices-2.6+.txt.orig +19 -19
@@ -122,7 +122,7 @@ Your cooperation is appreciated.
 		devices are on major 128 and above and use the PTY
 		master multiplex (/dev/ptmx) to acquire a PTY on
 		demand.
-  
+
   2 block	Floppy disks
 		  0 = /dev/fd0		Controller 0, drive 0, autodetect
 		  1 = /dev/fd1		Controller 0, drive 1, autodetect

@@ -257,7 +257,7 @@ Your cooperation is appreciated.
 		129 = /dev/vcsa1	tty1 text/attribute contents
 		    ...
 		191 = /dev/vcsa63	tty63 text/attribute contents
-	
+
 		NOTE: These devices permit both read and write access.
 
   7 block	Loopback devices

@@ -411,7 +411,7 @@ Your cooperation is appreciated.
 		207 = /dev/video/em8300_sp	EM8300 DVD decoder subpicture
 		208 = /dev/compaq/cpqphpc	Compaq PCI Hot Plug Controller
 		209 = /dev/compaq/cpqrid	Compaq Remote Insight Driver
-		210 = /dev/impi/bt	IMPI coprocessor block transfer	
+		210 = /dev/impi/bt	IMPI coprocessor block transfer
 		211 = /dev/impi/smic	IMPI coprocessor stream interface
 		212 = /dev/watchdogs/0	First watchdog device
 		213 = /dev/watchdogs/1	Second watchdog device

@@ -582,7 +582,7 @@ Your cooperation is appreciated.
 
 		This device is used on the ARM-based Acorn RiscPC.
 		Partitions are handled the same way as for IDE disks
-		(see major number 3). 
+		(see major number 3).
 
  22 char	Digiboard serial card
 		  0 = /dev/ttyD0	First Digiboard port

@@ -591,7 +591,7 @@ Your cooperation is appreciated.
  22 block	Second IDE hard disk/CD-ROM interface
 		  0 = /dev/hdc		Master: whole disk (or CD-ROM)
 		 64 = /dev/hdd		Slave: whole disk (or CD-ROM)
-		
+
 		Partitions are handled the same way as for the first
 		interface (see major number 3).
 

@@ -801,7 +801,7 @@ Your cooperation is appreciated.
  34 block	Fourth IDE hard disk/CD-ROM interface
 		  0 = /dev/hdg		Master: whole disk (or CD-ROM)
 		 64 = /dev/hdh		Slave: whole disk (or CD-ROM)
-		
+
 		Partitions are handled the same way as for the first
 		interface (see major number 3).
 

@@ -939,7 +939,7 @@ Your cooperation is appreciated.
 		 16 = /dev/ftlb		FTL on second Memory Technology Device
 		 32 = /dev/ftlc		FTL on third Memory Technology Device
 		    ...
-		240 = /dev/ftlp		FTL on 16th Memory Technology Device 
+		240 = /dev/ftlp		FTL on 16th Memory Technology Device
 
 		Partitions are handled in the same way as for IDE
 		disks (see major number 3) except that the partition

@@ -1522,7 +1522,7 @@ Your cooperation is appreciated.
 		disks (see major number 3) except that the limit on
 		partitions is 15.
 
- 83 char	Matrox mga_vid video driver 
+ 83 char	Matrox mga_vid video driver
  		 0 = /dev/mga_vid0	1st video card
 		 1 = /dev/mga_vid1	2nd video card
 		 2 = /dev/mga_vid2	3rd video card

@@ -1695,7 +1695,7 @@ Your cooperation is appreciated.
 		  1 = /dev/ipnat	NAT control device/log file
 		  2 = /dev/ipstate	State information log file
 		  3 = /dev/ipauth	Authentication control device/log file
-		    ...		
+		    ...
 
  96 char	Parallel port ATAPI tape devices
 		  0 = /dev/pt0		First parallel port ATAPI tape

@@ -1731,7 +1731,7 @@ Your cooperation is appreciated.
 		  0 = /dev/ubda		First user-mode block device
 		 16 = /dev/udbb		Second user-mode block device
 		    ...
-		
+
 		Partitions are handled in the same way as for IDE
 		disks (see major number 3) except that the limit on
 		partitions is 15.

@@ -2305,7 +2305,7 @@ Your cooperation is appreciated.
 		  0 = /dev/drbd0	First DRBD device
 		  1 = /dev/drbd1	Second DRBD device
 		    ...
-		
+
 148 char	Technology Concepts serial card
 		  0 = /dev/ttyT0	First TCL port
 		  1 = /dev/ttyT1	Second TCL port

@@ -2427,7 +2427,7 @@ Your cooperation is appreciated.
 
 		Partitions are handled in the same way as for IDE
 		disks (see major number 3) except that the limit on
-		partitions is 31. 
+		partitions is 31.
 
 162 char	Raw block device interface
 		  0 = /dev/rawctl	Raw I/O control device

@@ -2565,9 +2565,9 @@ Your cooperation is appreciated.
 		243 = /dev/usb/dabusb3	Fourth dabusb device
 
 180 block	USB block devices
-		0 = /dev/uba		First USB block device
-		8 = /dev/ubb		Second USB block device
-		16 = /dev/ubc		Third USB block device
+		  0 = /dev/uba		First USB block device
+		  8 = /dev/ubb		Second USB block device
+		 16 = /dev/ubc		Third USB block device
  		    ...
 
 181 char	Conrad Electronic parallel port radio clocks

@@ -2654,7 +2654,7 @@ Your cooperation is appreciated.
 		 32 = /dev/mvideo/status2	Third device
 		    ...
 		    ...
-		240 = /dev/mvideo/status15	16th device 
+		240 = /dev/mvideo/status15	16th device
 		    ...
 
 195 char	Nvidia graphics devices

@@ -2767,7 +2767,7 @@ Your cooperation is appreciated.
 		 42 = /dev/ttySMX1		Motorola i.MX - port 1
 		 43 = /dev/ttySMX2		Motorola i.MX - port 2
 		 44 = /dev/ttyMM0		Marvell MPSC - port 0
-		 45 = /dev/ttyMM1		Marvell MPSC - port 1	
+		 45 = /dev/ttyMM1		Marvell MPSC - port 1
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
 		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5

@@ -3012,7 +3012,7 @@ Your cooperation is appreciated.
 		  0 = /dev/hvc0			First console port
 		  1 = /dev/hvc1			Second console port
 		    ...
-		  
+
 230 char	IBM iSeries virtual tape
 		  0 = /dev/iseries/vt0		First virtual tape, mode 0
 		  1 = /dev/iseries/vt1		Second virtual tape, mode 0

@@ -3094,7 +3094,7 @@ Your cooperation is appreciated.
 		This major is reserved to assist the expansion to a
 		larger number space.  No device nodes with this major
 		should ever be created on the filesystem.
-		(This is probaly not true anymore, but I'll leave it 
+		(This is probably not true anymore, but I'll leave it
 		for now /Torben)
 
 ---LARGE MAJORS!!!!!---
Signature · 1 line
Bye, Peter Korsgaard
#8 lore raw
Quoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Torben" == Mathiasen, Torben <[email protected]> writes:

Torben> Yeah, sorry about the slow turnaround time lately.
Hopefully it will better soon :). Torben> Please send me a patch and I'll have it in asap.

Ok, here you go:

Thanks. Applied to lanana.org. I'll get the kernel version merged too.

Torben

#9 lore raw
In reply to Peter Korsgaard

Documentation/devices.txt Your cooperation is appreciated. · line 3012

Quoted 5 lines · Peter Korsgaard

-229 char IBM iSeries virtual console

Documentation/devices.txt +2 -2
-		  0 = /dev/iseries/vtty0	First console port
-		  1 = /dev/iseries/vtty1	Second console port
+229 char	IBM iSeries/pSeries virtual console
+		  0 = /dev/hvc0			First console port

hvc0 is pSeries only, iSeries uses tty1 for its OS400 provided telnet console. I doubt there is a hvc1.

#10 lore raw
Quoted 4 lines · On Tue, 22 Aug 2006 19:23:39 +0200 Olaf Hering <[email protected]> wrote:

On Tue, Aug 22, Peter Korsgaard wrote:

Quoted 8 lines

Documentation/devices.txt Your cooperation is appreciated. · line 3012

Quoted 5 lines

-229 char IBM iSeries virtual console

Documentation/devices.txt +2 -2
-		  0 = /dev/iseries/vtty0	First console port
-		  1 = /dev/iseries/vtty1	Second console port
+229 char	IBM iSeries/pSeries virtual console
+		  0 = /dev/hvc0			First console port

hvc0 is pSeries only, iSeries uses tty1 for its OS400 provided telnet console. I doubt there is a hvc1.

There is a new driver for the iSeries console which uses /dev/hvc0. You are correct that there is not hvc1 on iSeries. (I actually submitted the change to Devices.txt)

Signature · 3 lines
Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/
#11 lore raw
In reply to Peter Korsgaard

Documentation/devices.txt Your cooperation is appreciated. · line 2571

Quoted 13 lines
Documentation/devices.txt +0 -0
@@ -2565,10 +2565,10 @@ Your cooperation is appreciated.
 		243 = /dev/usb/dabusb3	Fourth dabusb device

180 block USB block devices

Documentation/devices.txt +4 -4
-		  0 = /dev/uba		First USB block device
-		  8 = /dev/ubb		Second USB block device
-		 16 = /dev/ubc		Third USB block device
-		    ...
+		0 = /dev/uba		First USB block device
+		8 = /dev/ubb		Second USB block device
+		16 = /dev/ubc		Third USB block device
+ 		    ...

What's the reason for this indent change?

Jan Engelhardt

author
#12 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Jan" == Jan Engelhardt <[email protected]> writes:

Hi,

Quoted 9 lines

Documentation/devices.txt Your cooperation is appreciated. · line 2571

Quoted 9 lines

180 block USB block devices

Documentation/devices.txt +4 -4
-		  0 = /dev/uba		First USB block device
-		  8 = /dev/ubb		Second USB block device
-		 16 = /dev/ubc		Third USB block device
-		    ...
+		0 = /dev/uba		First USB block device
+		8 = /dev/ubb		Second USB block device
+		16 = /dev/ubc		Third USB block device
+ 		    ...

Jan> What's the reason for this indent change?

I don't know - Torben?

Signature · 1 line
Bye, Peter Korsgaard
#13 lore raw
Quoted 17 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

"Jan" == Jan Engelhardt <[email protected]> writes:

Hi,

Quoted 9 lines

Documentation/devices.txt Your cooperation is appreciated. · line 2571

Quoted 9 lines

180 block USB block devices

Documentation/devices.txt +4 -4
-		  0 = /dev/uba		First USB block device
-		  8 = /dev/ubb		Second USB block device
-		 16 = /dev/ubc		Third USB block device
-		    ...
+		0 = /dev/uba		First USB block device
+		8 = /dev/ubb		Second USB block device
+		16 = /dev/ubc		Third USB block device
+ 		    ...

Jan> What's the reason for this indent change?

Quoted 1 line

I don't know - Torben?

A wrong indent it seems. If someone else is working on getting this fixed let me know. Otherwise I'll update the kernel version of devices.txt and fix the whitespaces at the same time.

Torben

author
#14 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Torben" == Mathiasen, Torben <[email protected]> writes:

Hi,

Jan> What's the reason for this indent change?

Quoted 2 lines
Quoted 2 lines

I don't know - Torben?

Torben> A wrong indent it seems. If someone else is working on Torben> getting this fixed let me know. Otherwise I'll update the Torben> kernel version of devices.txt and fix the whitespaces at the Torben> same time.

It should be fixed by the patch I just sent you.

Signature · 1 line
Bye, Peter Korsgaard