w1: w1_therm: Document Maxim MAX31850 thermoelement IF.
Subsystems (2)
PATCH 1/1 w1: w1_therm: Document Maxim MAX31850 thermoelement IF.
w1_therm driver supports now MAX31850, too. Add it to documentation and fix a small typo.
Signed-off-by Markus Reichl <[email protected]>
--- Documentation/w1/slaves/w1_therm.rst | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
Documentation/w1/slaves/w1_therm.rst +7 -2
@@ -6,7 +6,8 @@ Supported chips: * Maxim ds18*20 based temperature sensors. * Maxim ds1825 based temperature sensors. - * GXCAS GC20MH01 temperature sensor. + * GXCAS GX20MH01 temperature sensor. + * Maxim MAX31850 thermoelement interface. Author: Evgeniy Polyakov <[email protected]>
@@ -15,7 +16,7 @@ Description ----------- w1_therm provides basic temperature conversion for ds18*20, ds28ea00, GX20MH01 -devices. +and MAX31850 devices. Supported family codes:
@@ -137,3 +138,7 @@ bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. The device is powered up in 14-bit resolution mode. The conversion times specified in the datasheet are too low and have to be increased. The device supports driver features ``1`` and ``2``. + +MAX31850 device shares family number 0x3B with DS1825. The device is generally +compatible with DS1825. The higher 4 bits of Config register read all 1, +indicating 15, but the device is always operating in 14-bit resolution mode.
Signature · 1 line
2.30.2
Quoted 7 lines · Markus Reichl
w1_thermdriver supports now MAX31850, too. Add it to documentation and fix a small typo.Signed-off-by Markus Reichl <[email protected]>--- Documentation/w1/slaves/w1_therm.rst | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
Applied, thanks.
jon