Skip to contentSkip to conversation

configs/stm32f469_disco: fix kernel bootup

PATCH Superseded Dario Binacchi 4 participants 4 messages Jun 7, 2021 – Jun 22, 2021 1 message not in the archive Arm STM32

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 configs/stm32f469_disco: fix kernel bootup

As described by [1], the kernel generated by the configuration for the STM32f469 Discovery board is buggy. Using a newer kernel, as suggested by [1], increases the dtb and Kernel image size. In particular, the 5.12 version of the kernel generates a dtb and a kernel image whose sum exceeds the 2 MByte of the flash module.

So I decided to replace the afboot-stm32 bootloader in the flash with U-boot to easily boot the system from sdcard without having to worry about the size of dtb, kernel and rootfs generated by the configuration.

This solution allows you to fix the kernel boot issue and makes it possible to use its future versions.

[1] http://buildroot-busybox.2317881.n4.nabble.com/Bug-11746-New-stm32f469-didn-t-work-correctly-td219644.html

---

Changes in v2:
- Replace stm32f429 with stm32f469 in the commit header.

 .../stm32f469-disco/extlinux.conf             |  4 +++
 .../stm32f469-disco/flash.sh                  |  4 +--
 .../stm32f469-disco/genimage.cfg              | 27 +++++++++++++++
 .../stm32f469-disco/linux.fragment            |  1 +
 ...sco-don-t-force-init-in-chosen-boota.patch | 33 -------------------
 .../stm32f469-disco/post-build.sh             |  4 +++
 .../stm32f469-disco/readme.txt                | 16 +++++++--
 configs/stm32f469_disco_defconfig             | 19 ++++++-----
 8 files changed, 62 insertions(+), 46 deletions(-)
 create mode 100644 board/stmicroelectronics/stm32f469-disco/extlinux.conf
 create mode 100644 board/stmicroelectronics/stm32f469-disco/genimage.cfg
 create mode 100644 board/stmicroelectronics/stm32f469-disco/linux.fragment
 delete mode 100644 board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch
 create mode 100755 board/stmicroelectronics/stm32f469-disco/post-build.sh
board/stmicroelectronics/stm32f469-disco/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..1c2db4383b
@@ -0,0 +1,4 @@
+label stm32f469-disco-buildroot
+  kernel /zImage
+  devicetree /stm32f469-disco.dtb
+  append console=ttySTM0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext2 rootwait earlyprintk consoleblank=0 ignore_loglevel
board/stmicroelectronics/stm32f469-disco/flash.sh +1 -3
index 0ec0beb2de..984d2b2599 100755
@@ -13,8 +13,6 @@ ${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
   -c "reset init" \
   -c "flash probe 0" \
   -c "flash info 0" \
-  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469i-disco.bin 0x08000000" \
-  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469-disco.dtb 0x08004000" \
-  -c "flash write_image erase ${OUTPUT_DIR}/images/xipImage 0x08008000" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
   -c "reset run" \
   -c "shutdown"
board/stmicroelectronics/stm32f469-disco/genimage.cfg new file +27 -0
new file mode 100644
index 0000000000..bc945955fa
@@ -0,0 +1,27 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"stm32f469-disco.dtb",
+			"extlinux"
+		}
+	}
+	size = 16M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		partition-type = 0xC
+                image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+		size = 32M
+	}
+}
+
board/stmicroelectronics/stm32f469-disco/linux.fragment new file +1 -0
new file mode 100644
index 0000000000..90f5e8a8ff
@@ -0,0 +1 @@
+# CONFIG_XIP_KERNEL is not set
\ No newline at end of file
board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch deleted +0 -33
deleted file mode 100644
index 750e477dfc..0000000000
@@ -1,33 +0,0 @@
-From c8f8f33c2f0460a34c9545b01a7972a7ed2df0e9 Mon Sep 17 00:00:00 2001
-From: Christophe Priouzeau <[email protected]>
-Date: Mon, 29 May 2017 13:38:16 +0200
-Subject: [PATCH] ARM: stm32f249-disco: don't force init= in /chosen/bootargs
-
-There is no reason to override the kernel's default init= value, as
-this breaks userspace that assumes the kernel default of /init is
-used. Since stm32 is often used with a minimal bootloader
-(afboot-stm32) that doesn't provide any mechanism to override the DTB,
-we need to adjust the kernel command line in the Device Tree source.
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
-Signed-off-by: Christophe Priouzeau <[email protected]>
----
- arch/arm/boot/dts/stm32f469-disco.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
-index 0dd56ef..93ee1b2 100644
---- a/arch/arm/boot/dts/stm32f469-disco.dts
-+++ b/arch/arm/boot/dts/stm32f469-disco.dts
-@@ -53,7 +53,7 @@
- 	compatible = "st,stm32f469i-disco", "st,stm32f469";
- 
- 	chosen {
--		bootargs = "root=/dev/ram rdinit=/linuxrc";
-+		bootargs = "root=/dev/ram";
- 		stdout-path = "serial0:115200n8";
- 	};
- 
--- 
-2.7.4
-
board/stmicroelectronics/stm32f469-disco/post-build.sh new file +4 -0
new file mode 100755
index 0000000000..ec20fca7d9
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/stmicroelectronics/stm32f469-disco/readme.txt +14 -2
index 888bff08a1..c1e1d30e69 100644
@@ -15,5 +15,17 @@ Flashing
 
   ./board/stmicroelectronics/stm32f469-disco/flash.sh output/
 
-It will flash the minimal bootloader, the Device Tree Blob, and the
-kernel image which includes the root filesystem as initramfs.
+It will flash the U-boot bootloader.
+
+Creating SD card
+----------------
+
+Buildroot prepares an"sdcard.img" image in the output/images/ directory,
+ready to be dumped on a SD card. Launch the following command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout and its content, see the
+definition in board/stmicroelectronics/stm32f469-disco/genimage.cfg.
configs/stm32f469_disco_defconfig +11 -8
index 9760d51878..8701ccbc02 100644
@@ -1,19 +1,22 @@
 BR2_arm=y
 BR2_cortex_m4=y
-BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh board/stmicroelectronics/stm32f469-disco/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f469-disco/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12"
 BR2_LINUX_KERNEL_DEFCONFIG="stm32"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config board/stmicroelectronics/stm32f469-disco/linux.fragment"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
-BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="32M"
 # BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_AFBOOT_STM32=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f469-discovery"
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_OPENOCD=y
Signature · 1 line
2.17.1

A message that is not in the archive (sent off-list or not yet received): AM0PR10MB2817F9DD331EF710AF2F4E6AE3369@AM0PR10MB2817.EURPRD10.PROD.OUTLOOK.COM

#2 lore raw

PATCH v2 1/1 configs/stm32f469_disco: fix kernel bootup

Quoted 17 lines · Christophe PRIOUZEAU

------------------------------------------------------------------------
*From:* Dario Binacchi <[email protected]>
*Sent:* Monday, June 7, 2021 6:31 PM
*To:* buildroot at buildroot.org <[email protected]> *Cc:* Christophe PRIOUZEAU <[email protected]>; Dario Binacchi <[email protected]>
*Subject:* [PATCH v2 1/1] configs/stm32f469_disco: fix kernel bootup As described by [1], the kernel generated by the configuration for the STM32f469 Discovery board is buggy. Using a newer kernel, as suggested by [1], increases the dtb and Kernel image size. In particular, the 5.12 version of the kernel generates a dtb and a kernel image whose sum exceeds the 2 MByte of the flash module.

So I decided to replace the afboot-stm32 bootloader in the flash with U-boot to easily boot the system from sdcard without having to worry about the size of dtb, kernel and rootfs generated by the configuration.

Quoted 8 lines

This solution allows you to fix the kernel boot issue and makes it possible to use its future versions.

[1]
http://buildroot-busybox.2317881.n4.nabble.com/Bug-11746-New-stm32f469-didn-t-work-correctly-td219644.html
<http://buildroot-busybox.2317881.n4.nabble.com/Bug-11746-New-stm32f469-didn-t-work-correctly-td219644.html>

Quoted 221 lines

---

Changes in v2:
- Replace stm32f429 with stm32f469 in the commit header.

 ?.../stm32f469-disco/extlinux.conf???????????? |? 4 +++
 ?.../stm32f469-disco/flash.sh????????????????? |? 4 +--
 ?.../stm32f469-disco/genimage.cfg????????????? | 27 +++++++++++++++
 ?.../stm32f469-disco/linux.fragment??????????? |? 1 +
 ?...sco-don-t-force-init-in-chosen-boota.patch | 33 -------------------
 ?.../stm32f469-disco/post-build.sh???????????? |? 4 +++
 ?.../stm32f469-disco/readme.txt??????????????? | 16 +++++++--
 ?configs/stm32f469_disco_defconfig???????????? | 19 ++++++-----

?8 files changed, 62 insertions(+), 46 deletions(-)
?create mode 100644 board/stmicroelectronics/stm32f469-disco/extlinux.conf
?create mode 100644 board/stmicroelectronics/stm32f469-disco/genimage.cfg
?create mode 100644 board/stmicroelectronics/stm32f469-disco/linux.fragment
?delete mode 100644
board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch
?create mode 100755 board/stmicroelectronics/stm32f469-disco/post-build.sh

board/stmicroelectronics/stm32f469-disco/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..1c2db4383b
@@ -0,0 +1,4 @@
+label stm32f469-disco-buildroot
+? kernel /zImage
+? devicetree /stm32f469-disco.dtb
+? append console=ttySTM0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext2 

rootwait earlyprintk consoleblank=0 ignore_loglevel

board/stmicroelectronics/stm32f469-disco/flash.sh +1 -3
index 0ec0beb2de..984d2b2599 100755
@@ -13,8 +13,6 @@ ${OUTPUT_DIR}/host/bin/openocd -f 
 board/stm32f469discovery.cfg \
 ?? -c "reset init" \
 ?? -c "flash probe 0" \
 ?? -c "flash info 0" \
-? -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469i-disco.bin 
 0x08000000" \
-? -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469-disco.dtb 
 0x08004000" \
-? -c "flash write_image erase ${OUTPUT_DIR}/images/xipImage 0x08008000" \
+? -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
 ?? -c "reset run" \
 ?? -c "shutdown"
board/stmicroelectronics/stm32f469-disco/genimage.cfg new file +27 -0
new file mode 100644
index 0000000000..bc945955fa
@@ -0,0 +1,27 @@
+image boot.vfat {
+?????? vfat {
+?????????????? files = {
+?????????????????????? "zImage",
+?????????????????????? "stm32f469-disco.dtb",
+?????????????????????? "extlinux"
+?????????????? }
+?????? }
+?????? size = 16M
+}
+
+image sdcard.img {
+?????? hdimage {
+?????? }
+
+?????? partition u-boot {
+?????????????? partition-type = 0xC
+??????????????? image = "boot.vfat"
+?????? }
+
+?????? partition rootfs {
+?????????????? partition-type = 0x83
+?????????????? image = "rootfs.ext2"
+?????????????? size = 32M
+?????? }
+}
+
board/stmicroelectronics/stm32f469-disco/linux.fragment new file +1 -0
new file mode 100644
index 0000000000..90f5e8a8ff
@@ -0,0 +1 @@
+# CONFIG_XIP_KERNEL is not set
\ No newline at end of file
(quoted diff) +0 -0

a/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch b/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch deleted file mode 100644
index 750e477dfc..0000000000
---
a/board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch +++ /dev/null

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch deleted +0 -4
@@ -1,33 +0,0 @@
-From c8f8f33c2f0460a34c9545b01a7972a7ed2df0e9 Mon Sep 17 00:00:00 2001
-From: Christophe Priouzeau <[email protected]>
-Date: Mon, 29 May 2017 13:38:16 +0200
-Subject: [PATCH] ARM: stm32f249-disco: don't force init= in 

/chosen/bootargs

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch deleted +0 -14
-
-There is no reason to override the kernel's default init= value, as
-this breaks userspace that assumes the kernel default of /init is
-used. Since stm32 is often used with a minimal bootloader
-(afboot-stm32) that doesn't provide any mechanism to override the DTB,
-we need to adjust the kernel command line in the Device Tree source.
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
-Signed-off-by: Christophe Priouzeau <[email protected]>
----
- arch/arm/boot/dts/stm32f469-disco.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/stm32f469-disco.dts 

b/arch/arm/boot/dts/stm32f469-disco.dts

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch deleted +0 -15
-index 0dd56ef..93ee1b2 100644
---- a/arch/arm/boot/dts/stm32f469-disco.dts
-+++ b/arch/arm/boot/dts/stm32f469-disco.dts
-@@ -53,7 +53,7 @@
-??????? compatible = "st,stm32f469i-disco", "st,stm32f469";
-
-??????? chosen {
--????????????? bootargs = "root=/dev/ram rdinit=/linuxrc";
-+????????????? bootargs = "root=/dev/ram";
-??????????????? stdout-path = "serial0:115200n8";
-??????? };
-
---
-2.7.4
-
board/stmicroelectronics/stm32f469-disco/post-build.sh new file +4 -0
new file mode 100755
index 0000000000..ec20fca7d9
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf 

$BINARIES_DIR/extlinux/extlinux.conf

board/stmicroelectronics/stm32f469-disco/readme.txt +14 -2
index 888bff08a1..c1e1d30e69 100644
@@ -15,5 +15,17 @@ Flashing
 
 ?? ./board/stmicroelectronics/stm32f469-disco/flash.sh output/
 
-It will flash the minimal bootloader, the Device Tree Blob, and the
-kernel image which includes the root filesystem as initramfs.
+It will flash the U-boot bootloader.
+
+Creating SD card
+----------------
+
+Buildroot prepares an"sdcard.img" image in the output/images/ directory,
+ready to be dumped on a SD card. Launch the following command as root:
+
+? dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout and its content, see the
+definition in board/stmicroelectronics/stm32f469-disco/genimage.cfg.
configs/stm32f469_disco_defconfig +1 -3
index 9760d51878..8701ccbc02 100644
@@ -1,19 +1,22 @@
 ?BR2_arm=y
 ?BR2_cortex_m4=y
-BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh 

board/stmicroelectronics/stm32f469-disco/post-build.sh"

configs/stm32f469_disco_defconfig +2 -0
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c 

board/stmicroelectronics/stm32f469-disco/genimage.cfg"
?BR2_LINUX_KERNEL=y ?BR2_LINUX_KERNEL_CUSTOM_VERSION=y

configs/stm32f469_disco_defconfig +2 -2
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12"
 ?BR2_LINUX_KERNEL_DEFCONFIG="stm32"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config 

board/stmicroelectronics/stm32f469-disco/linux.fragment"
?BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y

configs/stm32f469_disco_defconfig +6 -3
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
 ?BR2_LINUX_KERNEL_DTS_SUPPORT=y
 ?BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 ?BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
-BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="32M"
 ?# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_AFBOOT_STM32=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f469-discovery"
+BR2_PACKAGE_HOST_GENIMAGE=y
 ?BR2_PACKAGE_HOST_OPENOCD=y
Signature · 4 lines
2.17.1


ST Restricted
Signature · 5 lines
Best regards / Cordialement,

Christophe Priouzeau | Tel: +33 244027320
STMicroelectronics
ST online: www.st.com<http://www.st.com/>
#3 lore raw

PATCH v2 1/1 configs/stm32f469_disco: fix kernel bootup

In reply to Dario Binacchi
Quoted 8 lines · Dario Binacchi via buildroot

As described by [1], the kernel generated by the configuration for the STM32f469 Discovery board is buggy. Using a newer kernel, as suggested by [1], increases the dtb and Kernel image size. In particular, the 5.12 version of the kernel generates a dtb and a kernel image whose sum exceeds the 2 MByte of the flash module.

So I decided to replace the afboot-stm32 bootloader in the flash with U-boot to easily boot the system from sdcard without having to worry

This is pretty unfortunate, since this is pretty much the flagship platform for
showcasing XIP support in the kernel.

However, the current situation is broken, so *something* needs to be done.

I've experimented a bit with kernel config options but also wasn't able to
reduce it to below 2MB. The biggest improvement I got was 150K by removing keyboard and mouse support. We could probably also et below 2MB by removing the block layer, the SD card driver, and the ext4 filesystem - but then there's not much left any more...

Maybe with LTO, but that requires clang at the moment.

Therefore, applied to master, thanks, with two modifications, see below.

[snip]

configs/stm32f469_disco_defconfig line 4

Quoted 9 lines
configs/stm32f469_disco_defconfig +0 -2
index 9760d51878..8701ccbc02 100644
@@ -1,19 +1,22 @@
 BR2_arm=y
 BR2_cortex_m4=y
-BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y

Even though 5.12 is the default, we really need it explicitly here. Otherwise,
the next linux bump will break it.

configs/stm32f469_disco_defconfig line 8

Quoted 8 lines
configs/stm32f469_disco_defconfig +4 -2
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh board/stmicroelectronics/stm32f469-disco/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f469-disco/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12"

There's a 5.12.11 now in stable so I took that one.

Regards,
Arnout

Quoted 19 lines
configs/stm32f469_disco_defconfig +7 -4
 BR2_LINUX_KERNEL_DEFCONFIG="stm32"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config board/stmicroelectronics/stm32f469-disco/linux.fragment"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
-BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="32M"
 # BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_AFBOOT_STM32=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f469-discovery"
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_OPENOCD=y
#4 lore raw

PATCH v2 1/1 configs/stm32f469_disco: fix kernel bootup

In reply to Dario Binacchi
Quoted 12 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Dario" == Dario Binacchi via buildroot <[email protected]> writes:

As described by [1], the kernel generated by the configuration for the STM32f469 Discovery board is buggy. Using a newer kernel, as suggested by [1], increases the dtb and Kernel image size. In particular, the 5.12 version of the kernel generates a dtb and a kernel image whose sum exceeds the 2 MByte of the flash module.

So I decided to replace the afboot-stm32 bootloader in the flash with U-boot to easily boot the system from sdcard without having to worry about the size of dtb, kernel and rootfs generated by the configuration.

Quoted 6 lines

This solution allows you to fix the kernel boot issue and makes it possible to use its future versions.

[1] http://buildroot-busybox.2317881.n4.nabble.com/Bug-11746-New-stm32f469-didn-t-work-correctly-td219644.html

Committed to 2021.02.x and 2021.05.x, thanks.

I notice that the defconfig doesn't pull in host dosfstools / mtools, which are needed to build the fat filesystem image, so I've sent a patch for that.

Signature · 1 line
Bye, Peter Korsgaard