Skip to contentSkip to conversation

raspberrypi: update defconfig

PATCH New Yann E. MORIN 2 participants 5 messages Feb 10, 2014 Broadcom BCM2711/BCM2835 Arm architecture

lore
Share & tools
lore
#0 lore raw

cover raspberrypi: update defconfig

From: "Yann E. MORIN" <[email protected]>

Hello All!

A quick bump and cleanup for the raspberrypi defconfig (hopefully before -rc1!).

Regards,
Yann E. MORIN.

----------------------------------------------------------------
Yann E. MORIN (2):
configs/raspberrypi: bump kernel version configs/raspberrypi: remove packages not strictly required

 configs/raspberrypi_defconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#1 lore raw

PATCH 1/2 configs/raspberrypi: bump kernel version

From: "Yann E. MORIN" <[email protected]>

Bump from rpi-3.10.27 to rpi-3.10.29.

---
 configs/raspberrypi_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/raspberrypi_defconfig +1 -1
index ffcb027..b334b0a 100644
@@ -17,7 +17,7 @@ BR2_DEFAULT_KERNEL_VERSION="3.10.25"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ab2ed0dbf37e8d397e60f37621629082da75cd58"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="cdeb937acdc0cb00e3d3bc30d6053ec53030cc64"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi_quick"
 BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
1.8.1.2
#2 lore raw

PATCH 2/2 configs/raspberrypi: remove packages not strictly required

In reply to Yann E. MORIN

From: "Yann E. MORIN" <[email protected]>

rpi-userland and libcoffi are not strictly required to boot up the Raspberry Pi, so remove them from the defconfig.

---
 configs/raspberrypi_defconfig | 2 --
 1 file changed, 2 deletions(-)
configs/raspberrypi_defconfig +0 -2
index b334b0a..2d1cc34 100644
@@ -7,8 +7,6 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 
 BR2_PACKAGE_RPI_FIRMWARE=y
-BR2_PACKAGE_RPI_USERLAND=y
-BR2_PACKAGE_LIBCOFI=y
 
 # Lock to 3.10 headers as the RPi kernel is based off the 3.10 branch
 BR2_KERNEL_HEADERS_VERSION=y
Signature · 1 line
1.8.1.2
#3 lore raw

cover raspberrypi: update defconfig

In reply to Yann E. MORIN

Peter,

On 2014-02-10 21:53 +0100, Yann E. MORIN spake thusly:

Quoted 2 lines

A quick bump and cleanup for the raspberrypi defconfig (hopefully before -rc1!).

I just forgot to say: tested on the RPi as you asked. I could not find any obvious regression.

Note that I refrained from bumping rpi-userland and rpi-firmware. ;-)

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'