package/libxml2: bumping version to 2.9.1

PATCH New Carsten Schoenert 2 participants 9 messages Jun 28, 2013 – Jun 29, 2013

lore

Share & tools

lore

Carsten Schoenert

author

2013-06-28 18:52 UTC #0 lore raw

PATCH 1/4 package/libxml2: bumping version to 2.9.1

From: Carsten Schoenert <[email protected]>

Signed-off-by Carsten Schoenert <[email protected]>

---
 package/libxml2/libxml2.mk |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

package/libxml2/libxml2.mk +1 -1

index b714234..7116b82 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBXML2_VERSION = 2.9.0
+LIBXML2_VERSION = 2.9.1
 LIBXML2_SITE = ftp://xmlsoft.org/libxml2
 LIBXML2_INSTALL_STAGING = YES
 LIBXML2_AUTORECONF = YES

Signature · 1 line

1.7.10.4

Carsten Schoenert

author

2013-06-28 18:52 UTC #1 lore raw

PATCH 2/4 package/libsvg: new package

From: Carsten Schoenert <[email protected]>

Libsvg provides a library for parsing SVG content in files or buffers. Libsvg does not do any rendering, but instead provides a function-based interface that can be used by various rendering engines.

Signed-off-by Carsten Schoenert <[email protected]>

---
 package/Config.in        |    1 +
 package/libsvg/Config.in |   10 ++++++++++
 package/libsvg/libsvg.mk |   15 +++++++++++++++
 3 files changed, 26 insertions(+)
 create mode 100644 package/libsvg/Config.in
 create mode 100644 package/libsvg/libsvg.mk

package/Config.in +1 -0

index ebeabeb..7f5714d 100644
@@ -461,6 +461,7 @@ source "package/libpng/Config.in"
 source "package/libqrencode/Config.in"
 source "package/libraw/Config.in"
 source "package/librsvg/Config.in"
+source "package/libsvg/Config.in"
 source "package/libsvgtiny/Config.in"
 source "package/libungif/Config.in"
 source "package/opencv/Config.in"

package/libsvg/Config.in new file +10 -0

new file mode 100644
index 0000000..0e372fe
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_LIBSVG
+	bool "libsvg"
+	select BR2_PACKAGE_LIBXML2
+	help
+	  Libsvg provides a parser for SVG content in files or buffers.
+	  Libsvg does not do any rendering, but instead provides a
+	  function-based interface that can be used by various rendering
+	  engines.
+
+	  http://www.t2-project.org/packages/libsvg.html

package/libsvg/libsvg.mk new file +15 -0

new file mode 100644
index 0000000..069314d
@@ -0,0 +1,15 @@
+################################################################################
+#
+# libsvg
+#
+################################################################################
+
+LIBSVG_VERSION         = 0.1.4
+LIBSVG_SOURCE          = libsvg-$(LIBSVG_VERSION).tar.gz
+LIBSVG_SITE            = http://cairographics.org/snapshots/
+LIBSVG_DEPENDENCIES    = libxml2
+LIBSVG_INSTALL_STAGING = YES
+LIBSVG_LICENSE         = LGPLv2
+LIBSVG_LICENSE_FILES   = COPYING
+
+$(eval $(autotools-package))

Signature · 1 line

1.7.10.4

Peter Korsgaard

2013-06-28 19:14 UTC #2 lore raw

PATCH 2/4 package/libsvg: new package

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Carsten" == Carsten Schoenert <[email protected]> writes:

Carsten> From: Carsten Schoenert <[email protected]>
Carsten> Libsvg provides a library for parsing SVG content in files or buffers. Carsten> Libsvg does not do any rendering, but instead provides a function-based Carsten> interface that can be used by various rendering engines.

Carsten> Signed-off-by: Carsten Schoenert <[email protected]> Carsten> ---

 Carsten>  package/Config.in        |    1 +
 Carsten>  package/libsvg/Config.in |   10 ++++++++++
 Carsten>  package/libsvg/libsvg.mk |   15 +++++++++++++++
 Carsten>  3 files changed, 26 insertions(+)
 Carsten>  create mode 100644 package/libsvg/Config.in
 Carsten>  create mode 100644 package/libsvg/libsvg.mk

Carsten> diff --git a/package/Config.in b/package/Config.in Carsten> index ebeabeb..7f5714d 100644
Carsten> --- a/package/Config.in
Carsten> +++ b/package/Config.in
Carsten> @@ -461,6 +461,7 @@ source "package/libpng/Config.in"

 Carsten>  source "package/libqrencode/Config.in"
 Carsten>  source "package/libraw/Config.in"
 Carsten>  source "package/librsvg/Config.in"
 Carsten> +source "package/libsvg/Config.in"
 Carsten>  source "package/libsvgtiny/Config.in"
 Carsten>  source "package/libungif/Config.in"
 Carsten>  source "package/opencv/Config.in"
 Carsten> diff --git a/package/libsvg/Config.in b/package/libsvg/Config.in
 Carsten> new file mode 100644
 Carsten> index 0000000..0e372fe
 Carsten> --- /dev/null
 Carsten> +++ b/package/libsvg/Config.in
 Carsten> @@ -0,0 +1,10 @@
 Carsten> +config BR2_PACKAGE_LIBSVG
 Carsten> +	bool "libsvg"
 Carsten> +	select BR2_PACKAGE_LIBXML2
 Carsten> +	help
 Carsten> +	  Libsvg provides a parser for SVG content in files or buffers.
 Carsten> +	  Libsvg does not do any rendering, but instead provides a
 Carsten> +	  function-based interface that can be used by various rendering
 Carsten> +	  engines.

Carsten> +
Carsten> + http://www.t2-project.org/packages/libsvg.html

Are you sure that's the upstream URL? Isn't t2 yet another embedded build system?

Carsten> diff --git a/package/libsvg/libsvg.mk b/package/libsvg/libsvg.mk Carsten> new file mode 100644
Carsten> index 0000000..069314d
Carsten> --- /dev/null
Carsten> +++ b/package/libsvg/libsvg.mk
Carsten> @@ -0,0 +1,15 @@
Carsten> +################################################################################ Carsten> +#
Carsten> +# libsvg
Carsten> +#
Carsten> +################################################################################ Carsten> +
Carsten> +LIBSVG_VERSION = 0.1.4
Carsten> +LIBSVG_SOURCE = libsvg-$(LIBSVG_VERSION).tar.gz

This is the default, so you can drop this line.

Personally I prefer to not align the '=' signs, but I know we have a bit of a mix in the tree.

Carsten> +LIBSVG_SITE = http://cairographics.org/snapshots/
Carsten> +LIBSVG_DEPENDENCIES = libxml2
Carsten> +LIBSVG_INSTALL_STAGING = YES
Carsten> +LIBSVG_LICENSE = LGPLv2

grep -rls 'any later version' src | wc -l
24

It looks to be LGPLv2+.

Carsten> +LIBSVG_LICENSE_FILES = COPYING
Carsten> +
Carsten> +$(eval $(autotools-package))

It looks good, but it doesn't work:

checking for ANSI C header files... (cached) yes
checking whether libexpat is requested... no
./configure: line 20639: /home/peko/source/buildroot/output/host/usr/bin/pkg-config: No such file or directory
*** Your version of pkg-config is too old. You need version 0.9.0 or newer.
*** See http://www.freedesktop.org/software/pkgconfig
configure: error: Library requirements (libxml-2.0 >= 2.4.7 ) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.

So you atleast need host-pkgconf as a dependency. It looks like it can work with expat instead, so you could drop the hard dependency on libxml2, but that is not really critical.

Signature · 1 line

Bye, Peter Korsgaard

Carsten Schoenert

author

2013-06-29 08:46 UTC #3 lore raw

PATCH 2/4 package/libsvg: new package

Hello Peter,

Am 28.06.2013 21:14, schrieb Peter Korsgaard:

Quoted 4 lines

Carsten> + http://www.t2-project.org/packages/libsvg.html
Are you sure that's the upstream URL? Isn't t2 yet another embedded build system?

Yes, true. After a longer try to find a "official" project webpage I couldn't find no one that fits into.
The source is placed under cairographics.org (but even without any dedicated info for the package libsvg (and also for libsvg-cairo). So just point to the main site of cairographics.org?

Quoted 4 lines

This is the default, so you can drop this line.
Personally I prefer to not align the '=' signs, but I know we have a bit of a mix in the tree.

Ahh, o.k. I didn't ever realize that, will drop this line.

Quoted 6 lines

Carsten> +LIBSVG_LICENSE = LGPLv2
grep -rls 'any later version' src | wc -l
24
It looks to be LGPLv2+.

You are right, it's later written in the COPYING file.

Quoted 9 lines

It looks good, but it doesn't work:
checking for ANSI C header files... (cached) yes
checking whether libexpat is requested... no
./configure: line 20639: /home/peko/source/buildroot/output/host/usr/bin/pkg-config: No such file or directory
*** Your version of pkg-config is too old. You need version 0.9.0 or newer.
*** See http://www.freedesktop.org/software/pkgconfig
configure: error: Library requirements (libxml-2.0 >= 2.4.7 ) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.

Quoted 3 lines

So you atleast need host-pkgconf as a dependency. It looks like it can work with expat instead, so you could drop the hard dependency on libxml2, but that is not really critical.

That's correct, it should working with expat too (as a deeper look into configure.in is showing). I changed the the libsvg.mk to cover this

Quoted 5 lines

ifeq ($(BR2_PACKAGE_EXPAT),y)
LIBSVG_CONF_OPT += --with-expat
else
LIBSVG_DEPENDENCIES += libxml2
endif

but it doesn't work with my external (crosstool-NG) toolchain which I create at my self, the expat.h is missing.

Quoted 10 lines

checking whether libexpat is requested... yes
configure: creating ./config.status
config.status: creating libsvg.spec
config.status: creating libsvg.pc
config.status: creating src/svg_version.h
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
Quoted 1 line
Quoted 1 line
Quoted 1 line
libsvg 0.1.4 Building

...

Quoted 2 lines

In file included from svg.c:31:0:
svgint.h:28:19: fatal error: expat.h: No such file or directory

The BR2_PACKAGE_EXPAT is set by BR2_INSTALL_LIBSTDCPP which is set by BR2_TOOLCHAIN_EXTERNAL_CXX. But crosstool-NG didn't provide the expat related files.

http://sourceware.org/ml/crossgcc/2013-03/msg00021.html

So I think there is a little problem, how to tell buildroot if there is a real support for expat or not? Maybe the other external toolchains provide the expat files, I don't have tested this.

So I would suggest to set up the dependency to libxml2 with a comment why.

Regards
Carsten

Peter Korsgaard

2013-06-29 15:09 UTC #4 lore raw

PATCH 2/4 package/libsvg: new package

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Carsten" == Carsten Schoenert <[email protected]> writes:

Carsten> Hello Peter,
Carsten> Am 28.06.2013 21:14, schrieb Peter Korsgaard:
Carsten> + http://www.t2-project.org/packages/libsvg.html

Quoted 3 lines

Quoted 3 lines
Are you sure that's the upstream URL? Isn't t2 yet another embedded build system?

Carsten> Yes, true. After a longer try to find a "official" project webpage I Carsten> couldn't find no one that fits into.
Carsten> The source is placed under cairographics.org (but even without any Carsten> dedicated info for the package libsvg (and also for libsvg-cairo). So Carsten> just point to the main site of cairographics.org?

Yes, just use http://cairographics.org

Quoted 9 lines

Quoted 9 lines
It looks good, but it doesn't work:
checking for ANSI C header files... (cached) yes
checking whether libexpat is requested... no
./configure: line 20639: /home/peko/source/buildroot/output/host/usr/bin/pkg-config: No such file or directory
*** Your version of pkg-config is too old. You need version 0.9.0 or newer.
*** See http://www.freedesktop.org/software/pkgconfig
configure: error: Library requirements (libxml-2.0 >= 2.4.7 ) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.

Quoted 3 lines

Quoted 3 lines
So you atleast need host-pkgconf as a dependency. It looks like it can work with expat instead, so you could drop the hard dependency on libxml2, but that is not really critical.

Carsten> That's correct, it should working with expat too (as a deeper Carsten> look into configure.in is showing). I changed the the Carsten> libsvg.mk to cover this

Quoted 5 lines

Quoted 5 lines
ifeq ($(BR2_PACKAGE_EXPAT),y)
LIBSVG_CONF_OPT += --with-expat
else
LIBSVG_DEPENDENCIES += libxml2
endif

You should also add expat to LIBSVG_DEPENDENCIES for the expat case, and select the libxml2 package in Config.in if need (so Kconfig is in sync with the makefile) - something like:

select BR2_PACKAGE_LIBXML2 if !BR2_PACKAGE_EXPAT

Carsten> but it doesn't work with my external (crosstool-NG) toolchain which I Carsten> create at my self, the expat.h is missing.

Quoted 10 lines

Quoted 10 lines
checking whether libexpat is requested... yes
configure: creating ./config.status
config.status: creating libsvg.spec
config.status: creating libsvg.pc
config.status: creating src/svg_version.h
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
Quoted 1 line
Quoted 1 line
Quoted 1 line
libsvg 0.1.4 Building

Carsten> ...

Quoted 2 lines

Quoted 2 lines
In file included from svg.c:31:0:
svgint.h:28:19: fatal error: expat.h: No such file or directory

Probably because you forgot to add expat to the dependencies, so it isn't built yet by the time libsvg configure runs.

Carsten> The BR2_PACKAGE_EXPAT is set by BR2_INSTALL_LIBSTDCPP which is set by Carsten> BR2_TOOLCHAIN_EXTERNAL_CXX. But crosstool-NG didn't provide the expat Carsten> related files.

Ehh, I don't quite follow. BR2_PACKAGE_EXPAT is about libexpat for the TARGET. It doesn't have anything to do with the cross compiler needing expat for the host.

Signature · 1 line

Bye, Peter Korsgaard

Carsten Schoenert

author

2013-06-28 18:52 UTC #5 lore raw

PATCH 3/4 package/libsvg-cairo: new package

In reply to Carsten Schoenert

From: Carsten Schoenert <[email protected]>

Libsvg-cairo provides the ability to render SVG content from files or buffers. All rendering is performed using the cairo rendering library.

Signed-off-by Carsten Schoenert <[email protected]>

---
 package/Config.in                    |    1 +
 package/libsvg-cairo/Config.in       |   10 ++++++++++
 package/libsvg-cairo/libsvg-cairo.mk |   15 +++++++++++++++
 3 files changed, 26 insertions(+)
 create mode 100644 package/libsvg-cairo/Config.in
 create mode 100644 package/libsvg-cairo/libsvg-cairo.mk

package/Config.in +1 -0

index 7f5714d..ecf0fea 100644
@@ -462,6 +462,7 @@ source "package/libqrencode/Config.in"
 source "package/libraw/Config.in"
 source "package/librsvg/Config.in"
 source "package/libsvg/Config.in"
+source "package/libsvg-cairo/Config.in"
 source "package/libsvgtiny/Config.in"
 source "package/libungif/Config.in"
 source "package/opencv/Config.in"

package/libsvg-cairo/Config.in new file +10 -0

new file mode 100644
index 0000000..2101df3
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_LIBSVG_CAIRO
+	bool "libsvg-cairo"
+	select BR2_PACKAGE_CAIRO_SVG
+	help
+	  Libsvg-cairo provides the ability to render SVG content from
+	  files or buffers. All rendering is performed using the cairo
+	  rendering library.
+
+	  http://www.t2-project.org/packages/libsvg-cairo.html
+

package/libsvg-cairo/libsvg-cairo.mk new file +15 -0

new file mode 100644
index 0000000..f10d57f
@@ -0,0 +1,15 @@
+################################################################################
+#
+# libsvg-cairo
+#
+################################################################################
+
+LIBSVG_CAIRO_VERSION         = 0.1.6
+LIBSVG_CAIRO_SOURCE          = libsvg-cairo-$(LIBSVG_CAIRO_VERSION).tar.gz
+LIBSVG_CAIRO_SITE            = http://cairographics.org/snapshots/
+LIBSVG_CAIRO_DEPENDENCIES    = cairo libsvg
+LIBSVG_CAIRO_INSTALL_STAGING = YES
+LIBSVG_CAIRO_LICENSE         = LGPLv2
+LIBSVG_CAIRO_LICENSE_FILES   = COPYING
+
+$(eval $(autotools-package))

Signature · 1 line

1.7.10.4

Carsten Schoenert

author

2013-06-28 18:52 UTC #6 lore raw

PATCH 4/4 package/directfb: fixing typo in DIRECTFB_CONF_OPT

In reply to Carsten Schoenert

From: Carsten Schoenert <[email protected]>

The DIRECTFB_CONF_OPT variable was missspelled for disabling the X11 support.

Signed-off-by Carsten Schoenert <[email protected]>

---
 package/directfb/directfb.mk |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

package/directfb/directfb.mk +1 -1

index 46f1eb9..c065eef 100644
@@ -44,7 +44,7 @@ endif
 ifeq ($(BR2_PACKAGE_XSERVER),y)
 DIRECTFB_CONF_OPT += --enable-x11
 else
-DIRECTFB_CONF_OPT += -disable-x11
+DIRECTFB_CONF_OPT += --disable-x11
 endif
 
 ifeq ($(BR2_PACKAGE_DIRECTFB_UNIQUE),y)

Signature · 1 line

1.7.10.4

Peter Korsgaard

2013-06-28 19:15 UTC #7 lore raw

PATCH 4/4 package/directfb: fixing typo in DIRECTFB_CONF_OPT

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Carsten" == Carsten Schoenert <[email protected]> writes:

Carsten> From: Carsten Schoenert <[email protected]>

Carsten> The DIRECTFB_CONF_OPT variable was missspelled for disabling Carsten> the X11 support.

Committed, thanks.

Signature · 1 line

Bye, Peter Korsgaard

Peter Korsgaard

2013-06-28 19:09 UTC #8 lore raw

PATCH 1/4 package/libxml2: bumping version to 2.9.1

In reply to Carsten Schoenert

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Carsten" == Carsten Schoenert <[email protected]> writes:

Carsten> From: Carsten Schoenert <[email protected]> Carsten> Signed-off-by: Carsten Schoenert <[email protected]>

Committed, thanks.

Signature · 1 line

Bye, Peter Korsgaard