Skip to contentSkip to conversation

mmc: pic32: PIC32MZDA SDHCI controller non-functional

PATCH New John Robertson 3 participants 3 messages Aug 22, 2020 – Aug 24, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mmc: pic32: PIC32MZDA SDHCI controller non-functional

Refresh driver code, remove obsolete DT props and set the max clock rate from the source clock 'base_clk'.

Card detect is also broken. The fix implemented for erratum #15 documented in Microchip ref. DS80000736D only needs to be done as in the current code (set CDSSEL, clear CDTLVL in SDHCCON1 to force 'detect') if the SDCD pin is not connected. If it is connected, card detect works fine. A vendor specific flag 'microchip,use-sdcd' has been added to enable real card detect functionality.

The card detect signal CDSLVL provided in the status register is inverted as described in erratum #16, but this does not apply to U-Boot because it uses the card inserted CARDINS flag. Therefore, 'cd-inverted' is not required.

---

 arch/mips/dts/pic32mzda_sk.dts  |  1 +
 drivers/mmc/pic32_sdhci.c       | 77 ++++++++++++++++++++-------------
 drivers/pinctrl/pinctrl_pic32.c | 28 ++++++++++++
 3 files changed, 77 insertions(+), 29 deletions(-)
arch/mips/dts/pic32mzda_sk.dts +1 -0
index b3c916a6db..fc86154e0a 100644
@@ -40,6 +40,7 @@
 };
 
 &sdhci {
+	microchip,use-sdcd;
 	status = "okay";
 };
 
drivers/mmc/pic32_sdhci.c +48 -29

116 lines not on this page · raw message

drivers/pinctrl/pinctrl_pic32.c +28 -0
index 911af1297b..899c279975 100644
@@ -222,6 +222,31 @@ static void pic32_eth_pin_config(struct udevice *dev)
 	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
 }
 
+static void pic32_sdhci_pin_config(struct udevice *dev)
+{
+	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+	const struct pic32_pin_config configs[] = {
+		/* SDWP - H2 */
+		PIN_CONFIG(PIC32_PORT_H, 2, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCD - A0 */
+		PIN_CONFIG(PIC32_PORT_A, 0, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCMD - D4 */
+		PIN_CONFIG(PIC32_PORT_D, 4, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCK - A6 */
+		PIN_CONFIG(PIC32_PORT_A, 6, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA0 - G13 */
+		PIN_CONFIG(PIC32_PORT_G, 13, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA1 - G12 */
+		PIN_CONFIG(PIC32_PORT_G, 12, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA2 - G14 */
+		PIN_CONFIG(PIC32_PORT_G, 14, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA3 - A7 */
+		PIN_CONFIG(PIC32_PORT_A, 7, PIN_CONFIG_PIC32_DIGITAL),
+	};
+
+	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
+}
+
 static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
 {
 	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
@@ -240,6 +265,9 @@ static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
 	case PERIPH_ID_ETH:
 		pic32_eth_pin_config(dev);
 		break;
+	case PERIPH_ID_SDHCI:
+		pic32_sdhci_pin_config(dev);
+		break;
 	default:
 		debug("%s: unknown-unhandled case\n", __func__);
 		break;
Signature · 1 line
2.28.0
#1 lore raw

PATCH 1/1 mmc: pic32: PIC32MZDA SDHCI controller non-functional

Am Samstag, den 22.08.2020, 02:37 +0000 schrieb John Robertson:

Quoted 10 lines

Refresh driver code, remove obsolete DT props and set the max clock rate from the source clock 'base_clk'.

Card detect is also broken. The fix implemented for erratum #15 documented in Microchip ref. DS80000736D only needs to be done as in the current code (set CDSSEL, clear CDTLVL in SDHCCON1 to force 'detect') if the SDCD pin is not connected. If it is connected, card detect works fine. A vendor specific flag 'microchip,use-sdcd' has been added to enable real card detect functionality.

Quoted 6 lines

The card detect signal CDSLVL provided in the status register is inverted as described in erratum #16, but this does not apply to U-Boot because it uses the card inserted CARDINS flag. Therefore, 'cd-inverted' is not required.

could you split this into smaller patches? You are fixing multiple issues at once which is hard to review and which breaks bisectability.

Quoted 187 lines

---

 arch/mips/dts/pic32mzda_sk.dts  |  1 +
 drivers/mmc/pic32_sdhci.c       | 77 ++++++++++++++++++++-------------
 drivers/pinctrl/pinctrl_pic32.c | 28 ++++++++++++
 3 files changed, 77 insertions(+), 29 deletions(-)
arch/mips/dts/pic32mzda_sk.dts +1 -0
index b3c916a6db..fc86154e0a 100644
@@ -40,6 +40,7 @@
 };
 
 &sdhci {
+	microchip,use-sdcd;
 	status = "okay";
 };
 
drivers/mmc/pic32_sdhci.c +48 -29
index 029e0fbc2b..93f0532ad6 100644
@@ -9,62 +9,78 @@
 #include <common.h>
 #include <dm.h>
 #include <sdhci.h>
-#include <linux/errno.h>
-#include <mach/pic32.h>
+#include <clk.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static int pic32_sdhci_get_cd(struct sdhci_host *host)
-{
-	/* PIC32 SDHCI CD errata:
-	 * - set CD_TEST and clear CD_TEST_INS bit
-	 */
-	sdhci_writeb(host, SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL);
-
-	return 0;
-}
-
-static const struct sdhci_ops pic32_sdhci_ops = {
-	.get_cd	= pic32_sdhci_get_cd,
+struct pic32_sdhci_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
 };
 
 static int pic32_sdhci_probe(struct udevice *dev)
 {
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct pic32_sdhci_plat *plat = dev_get_platdata(dev);
 	struct sdhci_host *host = dev_get_priv(dev);
-	const void *fdt = gd->fdt_blob;
-	u32 f_min_max[2];
+
 	fdt_addr_t addr;
 	fdt_size_t size;
+	struct clk clk;
+	ulong clk_rate;
 	int ret;
 
-	addr = fdtdec_get_addr_size(fdt, dev_of_offset(dev), "reg", &size);
+	addr = dev_read_addr_size(dev, "reg", &size);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
+	ret = clk_get_by_name(dev, "base_clk", &clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(&clk);
+	clk_free(&clk);
+
+	if (IS_ERR_VALUE(clk_rate))
+		return clk_rate;
+
 	host->ioaddr	= ioremap(addr, size);
 	host->name	= dev->name;
 	host->quirks	= SDHCI_QUIRK_NO_HISPD_BIT;
-	host->bus_width	= fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
-					"bus-width", 4);
-	host->ops = &pic32_sdhci_ops;
-
-	ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
-				   "clock-freq-min-max", f_min_max, 2);
-	if (ret) {
-		printf("sdhci: clock-freq-min-max not found\n");
+	host->bus_width	= dev_read_u32_default(dev, "bus-width", 4);
+	host->max_clk   = clk_rate;
+
+	host->mmc = &plat->mmc;
+	host->mmc->dev = dev;
+
+	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+	if (ret)
 		return ret;
-	}
 
-	host->max_clk   = f_min_max[1];
+	host->mmc->priv = host;
+	upriv->mmc = host->mmc;
 
-	ret = add_sdhci(host, 0, f_min_max[0]);
+	ret = sdhci_probe(dev);
 	if (ret)
 		return ret;
-	host->mmc->dev = dev;
+
+	if (!dev_read_bool(dev, "microchip,use-sdcd")) {
+		// Use workaround 1 for erratum #15 by default
+		u8 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		ctrl = (ctrl & ~SDHCI_CTRL_CD_TEST_INS) | SDHCI_CTRL_CD_TEST;
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
 
 	return 0;
 }
 
+static int pic32_sdhci_bind(struct udevice *dev)
+{
+	struct pic32_sdhci_plat *plat = dev_get_platdata(dev);
+
+	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
 static const struct udevice_id pic32_sdhci_ids[] = {
 	{ .compatible = "microchip,pic32mzda-sdhci" },
 	{ }
@@ -74,6 +90,9 @@ U_BOOT_DRIVER(pic32_sdhci_drv) = {
 	.name			= "pic32_sdhci",
 	.id			= UCLASS_MMC,
 	.of_match		= pic32_sdhci_ids,
+	.ops			= &sdhci_ops,
+	.bind			= pic32_sdhci_bind,
 	.probe			= pic32_sdhci_probe,
 	.priv_auto_alloc_size	= sizeof(struct sdhci_host),
+	.platdata_auto_alloc_size = sizeof(struct pic32_sdhci_plat)
 };
drivers/pinctrl/pinctrl_pic32.c +28 -0
index 911af1297b..899c279975 100644
@@ -222,6 +222,31 @@ static void pic32_eth_pin_config(struct udevice *dev)
 	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
 }
 
+static void pic32_sdhci_pin_config(struct udevice *dev)
+{
+	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+	const struct pic32_pin_config configs[] = {
+		/* SDWP - H2 */
+		PIN_CONFIG(PIC32_PORT_H, 2, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCD - A0 */
+		PIN_CONFIG(PIC32_PORT_A, 0, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCMD - D4 */
+		PIN_CONFIG(PIC32_PORT_D, 4, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCK - A6 */
+		PIN_CONFIG(PIC32_PORT_A, 6, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA0 - G13 */
+		PIN_CONFIG(PIC32_PORT_G, 13, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA1 - G12 */
+		PIN_CONFIG(PIC32_PORT_G, 12, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA2 - G14 */
+		PIN_CONFIG(PIC32_PORT_G, 14, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA3 - A7 */
+		PIN_CONFIG(PIC32_PORT_A, 7, PIN_CONFIG_PIC32_DIGITAL),
+	};
+
+	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
+}
+
 static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
 {
 	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
@@ -240,6 +265,9 @@ static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
 	case PERIPH_ID_ETH:
 		pic32_eth_pin_config(dev);
 		break;
+	case PERIPH_ID_SDHCI:
+		pic32_sdhci_pin_config(dev);
+		break;
 	default:
 		debug("%s: unknown-unhandled case\n", __func__);
 		break;
Signature · 1 line
- Daniel
#2 lore raw

PATCH 1/1 mmc: pic32: PIC32MZDA SDHCI controller non-functional

In reply to John Robertson

Hi,

CC'd Peng.

Quoted 81 lines · John Robertson

Refresh driver code, remove obsolete DT props and set the max clock rate from the source clock 'base_clk'.

Card detect is also broken. The fix implemented for erratum #15 documented in Microchip ref. DS80000736D only needs to be done as in the current code (set CDSSEL, clear CDTLVL in SDHCCON1 to force 'detect') if the SDCD pin is not connected. If it is connected, card detect works fine. A vendor specific flag 'microchip,use-sdcd' has been added to enable real card detect functionality.

The card detect signal CDSLVL provided in the status register is inverted as described in erratum #16, but this does not apply to U-Boot because it uses the card inserted CARDINS flag. Therefore, 'cd-inverted' is not required.

---

 arch/mips/dts/pic32mzda_sk.dts  |  1 +
 drivers/mmc/pic32_sdhci.c       | 77 ++++++++++++++++++++-------------
 drivers/pinctrl/pinctrl_pic32.c | 28 ++++++++++++
 3 files changed, 77 insertions(+), 29 deletions(-)
arch/mips/dts/pic32mzda_sk.dts +1 -0
index b3c916a6db..fc86154e0a 100644
@@ -40,6 +40,7 @@
 };
 
 &sdhci {
+	microchip,use-sdcd;
 	status = "okay";
 };
 
drivers/mmc/pic32_sdhci.c +9 -17
index 029e0fbc2b..93f0532ad6 100644
@@ -9,62 +9,78 @@
 #include <common.h>
 #include <dm.h>
 #include <sdhci.h>
-#include <linux/errno.h>
-#include <mach/pic32.h>
+#include <clk.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static int pic32_sdhci_get_cd(struct sdhci_host *host)
-{
-	/* PIC32 SDHCI CD errata:
-	 * - set CD_TEST and clear CD_TEST_INS bit
-	 */
-	sdhci_writeb(host, SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL);
-
-	return 0;
-}
-
-static const struct sdhci_ops pic32_sdhci_ops = {
-	.get_cd	= pic32_sdhci_get_cd,
+struct pic32_sdhci_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
 };
 
 static int pic32_sdhci_probe(struct udevice *dev)
 {
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct pic32_sdhci_plat *plat = dev_get_platdata(dev);
 	struct sdhci_host *host = dev_get_priv(dev);
-	const void *fdt = gd->fdt_blob;
-	u32 f_min_max[2];
+
 	fdt_addr_t addr;
 	fdt_size_t size;
+	struct clk clk;
+	ulong clk_rate;
 	int ret;
 
-	addr = fdtdec_get_addr_size(fdt, dev_of_offset(dev), "reg", &size);

drivers/mmc/pic32_sdhci.c line 42

Quoted 10 lines
drivers/mmc/pic32_sdhci.c +7 -0
+	addr = dev_read_addr_size(dev, "reg", &size);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
+	ret = clk_get_by_name(dev, "base_clk", &clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(&clk);
+	clk_free(&clk);

There is no case about using clk? it doesn't need to free clk.

Quoted 6 lines
drivers/mmc/pic32_sdhci.c +4 -0
+
+	if (IS_ERR_VALUE(clk_rate))
+		return clk_rate;
+
 	host->ioaddr	= ioremap(addr, size);
 	host->name	= dev->name;

drivers/mmc/pic32_sdhci.c line 50

Quoted 10 lines
drivers/mmc/pic32_sdhci.c +1 -8
 	host->quirks	= SDHCI_QUIRK_NO_HISPD_BIT;
-	host->bus_width	= fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
-					"bus-width", 4);
-	host->ops = &pic32_sdhci_ops;
-
-	ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
-				   "clock-freq-min-max", f_min_max, 2);
-	if (ret) {
-		printf("sdhci: clock-freq-min-max not found\n");
+	host->bus_width	= dev_read_u32_default(dev, "bus-width", 4);

if you can use mmc_of_parse(), then bus-width will be parsed.

Quoted 12 lines
drivers/mmc/pic32_sdhci.c +8 -2
+	host->max_clk   = clk_rate;
+
+	host->mmc = &plat->mmc;
+	host->mmc->dev = dev;
+
+	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+	if (ret)
 		return ret;
-	}
 
-	host->max_clk   = f_min_max[1];
+	host->mmc->priv = host;

drivers/mmc/pic32_sdhci.c line 68

Quoted 10 lines
drivers/mmc/pic32_sdhci.c +5 -2
+	upriv->mmc = host->mmc;
 
-	ret = add_sdhci(host, 0, f_min_max[0]);
+	ret = sdhci_probe(dev);
 	if (ret)
 		return ret;
-	host->mmc->dev = dev;
+
+	if (!dev_read_bool(dev, "microchip,use-sdcd")) {
+		// Use workaround 1 for erratum #15 by default

Explain workaround in more detail, plz.

Quoted 75 lines
drivers/mmc/pic32_sdhci.c +14 -0
+		u8 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		ctrl = (ctrl & ~SDHCI_CTRL_CD_TEST_INS) | SDHCI_CTRL_CD_TEST;
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
 
 	return 0;
 }
 
+static int pic32_sdhci_bind(struct udevice *dev)
+{
+	struct pic32_sdhci_plat *plat = dev_get_platdata(dev);
+
+	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
 static const struct udevice_id pic32_sdhci_ids[] = {
 	{ .compatible = "microchip,pic32mzda-sdhci" },
 	{ }
@@ -74,6 +90,9 @@ U_BOOT_DRIVER(pic32_sdhci_drv) = {
 	.name			= "pic32_sdhci",
 	.id			= UCLASS_MMC,
 	.of_match		= pic32_sdhci_ids,
+	.ops			= &sdhci_ops,
+	.bind			= pic32_sdhci_bind,
 	.probe			= pic32_sdhci_probe,
 	.priv_auto_alloc_size	= sizeof(struct sdhci_host),
+	.platdata_auto_alloc_size = sizeof(struct pic32_sdhci_plat)
 };
drivers/pinctrl/pinctrl_pic32.c +28 -0
index 911af1297b..899c279975 100644
@@ -222,6 +222,31 @@ static void pic32_eth_pin_config(struct udevice *dev)
 	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
 }
 
+static void pic32_sdhci_pin_config(struct udevice *dev)
+{
+	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+	const struct pic32_pin_config configs[] = {
+		/* SDWP - H2 */
+		PIN_CONFIG(PIC32_PORT_H, 2, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCD - A0 */
+		PIN_CONFIG(PIC32_PORT_A, 0, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCMD - D4 */
+		PIN_CONFIG(PIC32_PORT_D, 4, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDCK - A6 */
+		PIN_CONFIG(PIC32_PORT_A, 6, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA0 - G13 */
+		PIN_CONFIG(PIC32_PORT_G, 13, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA1 - G12 */
+		PIN_CONFIG(PIC32_PORT_G, 12, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA2 - G14 */
+		PIN_CONFIG(PIC32_PORT_G, 14, PIN_CONFIG_PIC32_DIGITAL),
+		/* SDDATA3 - A7 */
+		PIN_CONFIG(PIC32_PORT_A, 7, PIN_CONFIG_PIC32_DIGITAL),
+	};
+
+	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
+}
+
 static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
 {
 	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
@@ -240,6 +265,9 @@ static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
 	case PERIPH_ID_ETH:
 		pic32_eth_pin_config(dev);
 		break;
+	case PERIPH_ID_SDHCI:
+		pic32_sdhci_pin_config(dev);
+		break;
 	default:
 		debug("%s: unknown-unhandled case\n", __func__);
 		break;