arm64: dts: marvell: 7040-db: Document the gpio expander
Subsystems (2)
PATCH 1/1 arm64: dts: marvell: 7040-db: Document the gpio expander
Document all the GPIO of the expander based on the schematics
Signed-off-by Gregory CLEMENT <[email protected]>
--- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/marvell/armada-7040-db.dts +10 -0
@@ -143,6 +143,16 @@ gpio-controller; #gpio-cells = <2>; reg = <0x21>; + /* + * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect + * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit + * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN + * IO0_3: USB2_DEVICE_DETECT + * IO0_4: GPIO_0 IO1_4: SD_Status + * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable + * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC + * IO0_7: IO1_7: SDIO_Vcntrl + */ }; };
Signature · 1 line
2.14.2
PATCH 1/1 arm64: dts: marvell: 7040-db: Document the gpio expander
Hi,
Quoted 2 lines · Gregory CLEMENT
Document all the GPIO of the expander based on the schematics
Applied on mvebu/dt64
Gregory
Quoted 34 lines
Signed-off-by Gregory CLEMENT <[email protected]>--- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm64/boot/dts/marvell/armada-7040-db.dts +10
-0@@ -143,6 +143,16 @@ gpio-controller; #gpio-cells = <2>; reg = <0x21>; + /* + * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect + * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit + * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN + * IO0_3: USB2_DEVICE_DETECT + * IO0_4: GPIO_0 IO1_4: SD_Status + * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable + * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC + * IO0_7: IO1_7: SDIO_Vcntrl + */ }; };Signature · 7 lines
2.14.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com