Qemu sample configuration bumps
Subsystems (2)
cover Qemu sample configuration bumps
This patch series updates the kernel and candidate qemu versions to the latest possible versions.
The relevant kernel configurations are updated to switch from ext2 to ext4 since it covers more use cases.
ext* support was removed for platforms that are very unlikely to boot/use that kind of filesystem (microblaze).
Status matrix:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 3.17 2.1.2 YES OK arm_nuri 3.10.56 2.1.2 YES(1) OK most times(2) arm_versatile 3.17 2.1.2 YES OK arm_vexpress 3.17 2.1.2 YES OK microblazebe 3.17 2.1.2 YES OK microblazeel 3.17 2.1.2 YES OK mips64el_malta 3.17 2.1.2 YES OK mips64_malta 3.17 2.1.2 YES OK mipsel_malta 3.17 2.1.2 YES OK mips_malta 3.17 2.1.2 YES OK ppc_g3beige 3.17 2.1.2 YES OK ppc_mpc8544ds 3.17 2.0.2 YES OK(3) ppc_virtex_ml507 3.17 2.1.2 NO OK ppc64_pseries 3.17 2.1.2 YES OK sh4 3.17 2.1.2 YES OK sparc_ss10 3.17 2.1.2 YES OK x86 3.17 2.1.2 YES OK x86_64 3.17 2.1.2 YES OK xtensa_lx60 3.17 2.1.2 YES OK
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 starts it fails to work properly
(3) - Qemu 2.1.x doesn't show up anything (broken)
Gustavo Zacarias (19):
qemu/aarch64-virt: update to the latest versions qemu/arm-nuri: update to the latest versions qemu/arm-versatile: update to the latest versions qemu/arm-vexpress: update to the latest versions qemu/microblazebe-mmu: update to the latest versions qemu/microblazeel-mmu: update to the latest versions qemu/mips64el-malta: update to the latest versions qemu/mips64-malta: update to the latest versions qemu/mipsel-malta: update to the latest versions qemu/mips-malta: update to the latest versions qemu/sh4-r2d: update to the latest versions qemu/sparc-ss10: update to the latest versions qemu/xtensa-lx60: update to the latest versions qemu/x86_64: update to the latest versions qemu/x86: update to the latest versions qemu/ppc-g3beige: update to the latest versions qemu/ppc-mpc8544ds: update to the latest versions qemu/ppc-virtex-ml507: update to the latest versions qemu/ppc64-pseries: update to the latest versions
.../{linux-3.16.config => linux-3.17.config} | 3 +--
board/qemu/aarch64-virt/readme.txt | 2 +-
board/qemu/arm-nuri/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 2 +-
board/qemu/arm-versatile/readme.txt | 2 +-
board/qemu/arm-vexpress/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 4 ----
board/qemu/microblazebe-mmu/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 6 ++---
board/qemu/microblazeel-mmu/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mips-malta/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mips64-malta/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mips64el-malta/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mipsel-malta/readme.txt | 2 +-
.../linux-3.17.config} | 4 +---
.../{powerpc-g3beige => ppc-g3beige}/readme.txt | 2 +-
.../readme.txt | 2 +-
.../readme.txt | 5 ++--
.../readme.txt | 0
.../{linux-3.16.config => linux-3.17.config} | 28 +---------------------
board/qemu/sh4-r2d/readme.txt | 2 +-
board/qemu/sparc-ss10/readme.txt | 2 +-
.../linux-3.16.config => x86/linux-3.17.config} | 0
board/qemu/x86/readme.txt | 2 +-
.../linux-3.16.config => x86_64/linux-3.17.config} | 0
board/qemu/x86_64/readme.txt | 2 +-
.../{linux-3.16.config => linux-3.17.config} | 0
board/qemu/xtensa-lx60/readme.txt | 2 +-
configs/qemu_aarch64_virt_defconfig | 10 ++++----
configs/qemu_arm_nuri_defconfig | 4 ++--
configs/qemu_arm_versatile_defconfig | 10 ++++----
configs/qemu_arm_vexpress_defconfig | 8 +++----
configs/qemu_microblazebe_mmu_defconfig | 10 ++++----
configs/qemu_microblazeel_mmu_defconfig | 10 ++++----
configs/qemu_mips64_malta_defconfig | 10 ++++----
configs/qemu_mips64el_malta_defconfig | 10 ++++----
configs/qemu_mips_malta_defconfig | 10 ++++----
configs/qemu_mipsel_malta_defconfig | 10 ++++----
configs/qemu_ppc64_pseries_defconfig | 8 +++----
configs/qemu_ppc_g3beige_defconfig | 10 ++++----
configs/qemu_ppc_mpc8544ds_defconfig | 8 +++----
configs/qemu_ppc_virtex_ml507_defconfig | 13 ++++++----
configs/qemu_sh4_r2d_defconfig | 10 ++++----
configs/qemu_sparc_ss10_defconfig | 8 +++----
configs/qemu_x86_64_defconfig | 10 ++++----
configs/qemu_x86_defconfig | 10 ++++----
configs/qemu_xtensa_lx60_defconfig | 10 ++++----
51 files changed, 117 insertions(+), 148 deletions(-)
rename board/qemu/aarch64-virt/{linux-3.16.config => linux-3.17.config} (96%)
rename board/qemu/arm-versatile/{linux-3.16.config => linux-3.17.config} (98%)
rename board/qemu/microblazebe-mmu/{linux-3.16.config => linux-3.17.config} (92%)
rename board/qemu/microblazeel-mmu/{linux-3.16.config => linux-3.17.config} (92%)
rename board/qemu/mips-malta/{linux-3.16.config => linux-3.17.config} (100%)
rename board/qemu/mips64-malta/{linux-3.16.config => linux-3.17.config} (100%)
rename board/qemu/mips64el-malta/{linux-3.16.config => linux-3.17.config} (100%)
rename board/qemu/mipsel-malta/{linux-3.16.config => linux-3.17.config} (100%)
rename board/qemu/{powerpc-g3beige/linux-3.16.config => ppc-g3beige/linux-3.17.config} (93%)
rename board/qemu/{powerpc-g3beige => ppc-g3beige}/readme.txt (93%)
rename board/qemu/{powerpc-mpc8544ds => ppc-mpc8544ds}/readme.txt (89%)
rename board/qemu/{powerpc-virtex-ml507 => ppc-virtex-ml507}/readme.txt (58%)
rename board/qemu/{powerpc64-pseries => ppc64-pseries}/readme.txt (100%)
rename board/qemu/sh4-r2d/{linux-3.16.config => linux-3.17.config} (68%)
rename board/qemu/{x86_64/linux-3.16.config => x86/linux-3.17.config} (100%)
rename board/qemu/{x86/linux-3.16.config => x86_64/linux-3.17.config} (100%)
rename board/qemu/xtensa-lx60/{linux-3.16.config => linux-3.17.config} (100%)Signature · 1 line
2.0.4
PATCH 1/19 qemu/aarch64-virt: update to the latest versions
Signed-off-by Gustavo Zacarias <[email protected]>
---
.../qemu/aarch64-virt/{linux-3.16.config => linux-3.17.config} | 3 +--
board/qemu/aarch64-virt/readme.txt | 2 +-
configs/qemu_aarch64_virt_defconfig | 10 +++++-----
3 files changed, 7 insertions(+), 8 deletions(-)
rename board/qemu/aarch64-virt/{linux-3.16.config => linux-3.17.config} (96%)board/qemu/aarch64-virt/linux-3.17.config renamed from board/qemu/aarch64-virt/linux-3.16.config +1 -2
@@ -22,7 +22,7 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_BRIDGE=y +CONFIG_BRIDGE=m CONFIG_NET_SCHED=y CONFIG_VSOCKETS=y CONFIG_DEVTMPFS=y
@@ -30,7 +30,6 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y
board/qemu/aarch64-virt/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_aarch64_virt_defconfig +5 -5
@@ -8,16 +8,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-3.17.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
Signature · 1 line
2.0.4
PATCH 2/19 qemu/arm-nuri: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
--- board/qemu/arm-nuri/readme.txt | 2 +- configs/qemu_arm_nuri_defconfig | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
board/qemu/arm-nuri/readme.txt +1 -1
@@ -7,4 +7,4 @@ graphical window is the framebuffer. Startup time is slow because of the SMP CPU emulation so be patient. -Tested with QEMU 1.7.0 +Tested with QEMU 2.1.2
configs/qemu_arm_nuri_defconfig +2 -2
@@ -16,12 +16,12 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Lock to 3.10 headers to avoid breaking with newer kernels # Stuck at 3.10.x because there's no Nuri DTS BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.32" +BR2_DEFAULT_KERNEL_VERSION="3.10.56" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.32" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.56" BR2_LINUX_KERNEL_DEFCONFIG="exynos4" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
2.0.4
PATCH 3/19 qemu/arm-versatile: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../arm-versatile/{linux-3.16.config => linux-3.17.config} | 2 +-
board/qemu/arm-versatile/readme.txt | 2 +-
configs/qemu_arm_versatile_defconfig | 10 +++++-----
3 files changed, 7 insertions(+), 7 deletions(-)
rename board/qemu/arm-versatile/{linux-3.16.config => linux-3.17.config} (98%)board/qemu/arm-versatile/linux-3.17.config renamed from board/qemu/arm-versatile/linux-3.16.config +1 -1
@@ -59,7 +59,7 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_ARMAACI=m CONFIG_MMC=y CONFIG_MMC_ARMMMCI=m -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y
board/qemu/arm-versatile/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_arm_versatile_defconfig +5 -5
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.17.config" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
2.0.4
PATCH 4/19 qemu/arm-vexpress: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
--- board/qemu/arm-vexpress/readme.txt | 2 +- configs/qemu_arm_vexpress_defconfig | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-)
board/qemu/arm-vexpress/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_arm_vexpress_defconfig +4 -4
@@ -13,14 +13,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
2.0.4
PATCH 5/19 qemu/microblazebe-mmu: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../microblazebe-mmu/{linux-3.16.config => linux-3.17.config} | 4 ----
board/qemu/microblazebe-mmu/readme.txt | 2 +-
configs/qemu_microblazebe_mmu_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 10 deletions(-)
rename board/qemu/microblazebe-mmu/{linux-3.16.config => linux-3.17.config} (92%)board/qemu/microblazebe-mmu/linux-3.17.config renamed from board/qemu/microblazebe-mmu/linux-3.16.config +0 -4
@@ -3,7 +3,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y # CONFIG_BASE_FULL is not set
@@ -32,11 +31,9 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_XILINX=y CONFIG_XILINX_EMACLITE=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set
@@ -46,7 +43,6 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y # CONFIG_DNOTIFY is not set CONFIG_NFS_FS=y CONFIG_CIFS=y
board/qemu/microblazebe-mmu/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_microblazebe_mmu_defconfig +5 -5
@@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.17.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"
Signature · 1 line
2.0.4
PATCH 6/19 qemu/microblazeel-mmu: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../microblazeel-mmu/{linux-3.16.config => linux-3.17.config} | 6 ++----
board/qemu/microblazeel-mmu/readme.txt | 2 +-
configs/qemu_microblazeel_mmu_defconfig | 10 +++++-----
3 files changed, 8 insertions(+), 10 deletions(-)
rename board/qemu/microblazeel-mmu/{linux-3.16.config => linux-3.17.config} (92%)board/qemu/microblazeel-mmu/linux-3.17.config renamed from board/qemu/microblazeel-mmu/linux-3.16.config +2 -4
@@ -3,7 +3,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y # CONFIG_BASE_FULL is not set
@@ -31,11 +30,9 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_XILINX=y CONFIG_XILINX_EMACLITE=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set
@@ -45,7 +42,6 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y # CONFIG_DNOTIFY is not set CONFIG_NFS_FS=y CONFIG_CIFS=y
@@ -56,4 +52,6 @@ CONFIG_DEBUG_SLAB=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_SPINLOCK=y CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC16=y
board/qemu/microblazeel-mmu/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_microblazeel_mmu_defconfig +5 -5
@@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.17.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"
Signature · 1 line
2.0.4
PATCH 7/19 qemu/mips64el-malta: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../mips64el-malta/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mips64el-malta/readme.txt | 2 +-
configs/qemu_mips64el_malta_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/mips64el-malta/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/mips64el-malta/linux-3.17.config renamed from board/qemu/mips64el-malta/linux-3.16.config +0 -0
board/qemu/mips64el-malta/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_mips64el_malta_defconfig +5 -5
@@ -9,17 +9,17 @@ BR2_TOOLCHAIN_BUILDROOT_EGLIBC=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-3.17.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
2.0.4
PATCH 8/19 qemu/mips64-malta: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../qemu/mips64-malta/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mips64-malta/readme.txt | 2 +-
configs/qemu_mips64_malta_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/mips64-malta/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/mips64-malta/linux-3.17.config renamed from board/qemu/mips64-malta/linux-3.16.config +0 -0
board/qemu/mips64-malta/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_mips64_malta_defconfig +5 -5
@@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.17.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
2.0.4
PATCH 9/19 qemu/mipsel-malta: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../qemu/mipsel-malta/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mipsel-malta/readme.txt | 2 +-
configs/qemu_mipsel_malta_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/mipsel-malta/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/mipsel-malta/linux-3.17.config renamed from board/qemu/mipsel-malta/linux-3.16.config +0 -0
board/qemu/mipsel-malta/readme.txt +1 -1
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_mipsel_malta_defconfig +5 -5
@@ -6,17 +6,17 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.17.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
2.0.4
PATCH 10/19 qemu/mips-malta: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
board/qemu/mips-malta/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/mips-malta/readme.txt | 2 +-
configs/qemu_mips_malta_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/mips-malta/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/mips-malta/linux-3.17.config renamed from board/qemu/mips-malta/linux-3.16.config +0 -0
board/qemu/mips-malta/readme.txt +1 -1
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_mips_malta_defconfig +5 -5
@@ -6,17 +6,17 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.17.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
2.0.4
PATCH 11/19 qemu/sh4-r2d: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../{linux-3.16.config => linux-3.17.config} | 28 +---------------------
board/qemu/sh4-r2d/readme.txt | 2 +-
configs/qemu_sh4_r2d_defconfig | 10 ++++----
3 files changed, 7 insertions(+), 33 deletions(-)
rename board/qemu/sh4-r2d/{linux-3.16.config => linux-3.17.config} (68%)board/qemu/sh4-r2d/linux-3.17.config renamed from board/qemu/sh4-r2d/linux-3.16.config +1 -27
@@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y
@@ -33,12 +32,10 @@ CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_8139CP=y # CONFIG_WLAN is not set -CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_CONSOLE=y
@@ -46,45 +43,22 @@ CONFIG_HW_RANDOM=y CONFIG_SPI=y CONFIG_SPI_SH_SCI=y CONFIG_MFD_SM501=y -CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SH_MOBILE_HDMI=m CONFIG_FB_SM501=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_SUPERH_MONO is not set -# CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_SOUND=y CONFIG_SND_YMFPCI=m CONFIG_SOUND_PRIME=m -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_R9701=y -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y
board/qemu/sh4-r2d/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_sh4_r2d_defconfig +5 -5
@@ -14,15 +14,15 @@ BR2_TARGET_ROOTFS_EXT2=y # doesn't use floating point operations. BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu" -# Lock to 3.15 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.17.config" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
2.0.4
PATCH 12/19 qemu/sparc-ss10: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
--- board/qemu/sparc-ss10/readme.txt | 2 +- configs/qemu_sparc_ss10_defconfig | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-)
board/qemu/sparc-ss10/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_sparc_ss10_defconfig +4 -4
@@ -8,14 +8,14 @@ BR2_GLOBAL_PATCH_DIR="board/qemu/sparc-ss10" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_DEFCONFIG="sparc32" BR2_LINUX_KERNEL_ZIMAGE=y
Signature · 1 line
2.0.4
PATCH 13/19 qemu/xtensa-lx60: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../qemu/xtensa-lx60/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/xtensa-lx60/readme.txt | 2 +-
configs/qemu_xtensa_lx60_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/xtensa-lx60/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/xtensa-lx60/linux-3.17.config renamed from board/qemu/xtensa-lx60/linux-3.16.config +0 -0
board/qemu/xtensa-lx60/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_xtensa_lx60_defconfig +5 -5
@@ -14,17 +14,17 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.15 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-3.17.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
Signature · 1 line
2.0.4
PATCH 14/19 qemu/x86_64: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
board/qemu/x86_64/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/x86_64/readme.txt | 2 +-
configs/qemu_x86_64_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/x86_64/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/x86_64/linux-3.17.config renamed from board/qemu/x86_64/linux-3.16.config +0 -0
board/qemu/x86_64/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_x86_64_defconfig +5 -5
@@ -9,14 +9,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.17.config"
Signature · 1 line
2.0.4
PATCH 15/19 qemu/x86: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
board/qemu/x86/{linux-3.16.config => linux-3.17.config} | 0
board/qemu/x86/readme.txt | 2 +-
configs/qemu_x86_defconfig | 10 +++++-----
3 files changed, 6 insertions(+), 6 deletions(-)
rename board/qemu/x86/{linux-3.16.config => linux-3.17.config} (100%)board/qemu/x86/linux-3.17.config renamed from board/qemu/x86/linux-3.16.config +0 -0
board/qemu/x86/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_x86_defconfig +5 -5
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.17.config"
Signature · 1 line
2.0.4
PATCH 16/19 qemu/ppc-g3beige: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../linux-3.16.config => ppc-g3beige/linux-3.17.config} | 4 +---
board/qemu/{powerpc-g3beige => ppc-g3beige}/readme.txt | 2 +-
configs/qemu_ppc_g3beige_defconfig | 10 +++++-----
3 files changed, 7 insertions(+), 9 deletions(-)
rename board/qemu/{powerpc-g3beige/linux-3.16.config => ppc-g3beige/linux-3.17.config} (93%)
rename board/qemu/{powerpc-g3beige => ppc-g3beige}/readme.txt (93%)board/qemu/ppc-g3beige/linux-3.17.config renamed from board/qemu/powerpc-g3beige/linux-3.16.config +1 -3
@@ -13,7 +13,6 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_CONNECTOR=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y
@@ -38,8 +37,7 @@ CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_SSB=y CONFIG_SSB_PCMCIAHOST=y CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_SQUASHFS=y
board/qemu/ppc-g3beige/readme.txt renamed from board/qemu/powerpc-g3beige/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.1.0 +Tested with QEMU 2.1.2
configs/qemu_ppc_g3beige_defconfig +5 -5
@@ -6,17 +6,17 @@ BR2_powerpc_750=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.16.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-3.17.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
2.0.4
PATCH 17/19 qemu/ppc-mpc8544ds: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
board/qemu/{powerpc-mpc8544ds => ppc-mpc8544ds}/readme.txt | 2 +-
configs/qemu_ppc_mpc8544ds_defconfig | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
rename board/qemu/{powerpc-mpc8544ds => ppc-mpc8544ds}/readme.txt (89%)board/qemu/ppc-mpc8544ds/readme.txt renamed from board/qemu/powerpc-mpc8544ds/readme.txt +1 -1
@@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.7.0 +Tested with QEMU 2.0.2
configs/qemu_ppc_mpc8544ds_defconfig +4 -4
@@ -6,15 +6,15 @@ BR2_powerpc_8548=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.13 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.13.5" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx" BR2_LINUX_KERNEL_VMLINUX=y
Signature · 1 line
2.0.4
PATCH 18/19 qemu/ppc-virtex-ml507: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
.../{powerpc-virtex-ml507 => ppc-virtex-ml507}/readme.txt | 5 ++---
configs/qemu_ppc_virtex_ml507_defconfig | 13 +++++++++----
2 files changed, 11 insertions(+), 7 deletions(-)
rename board/qemu/{powerpc-virtex-ml507 => ppc-virtex-ml507}/readme.txt (58%)board/qemu/ppc-virtex-ml507/readme.txt renamed from board/qemu/powerpc-virtex-ml507/readme.txt +2 -3
@@ -1,8 +1,7 @@ Run the emulation with: - cp output/images/virtex440-ml507.dtb ppc.dtb - qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0" + qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0" -dtb virtex440-ml507.dtb The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.7.0 +Tested with QEMU 2.1.2
configs/qemu_ppc_virtex_ml507_defconfig +9 -4
@@ -6,10 +6,10 @@ BR2_powerpc_440=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.13 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.13.5" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Use soft float BR2_SOFT_FLOAT=y
@@ -17,8 +17,13 @@ BR2_SOFT_FLOAT=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507" + +# Qemu +BR2_PACKAGE_HOST_QEMU_SYSTEM=y +BR2_PACKAGE_HOST_QEMU_SYSTEM_VERSION="2.1.2" +BR2_PACKAGE_HOST_QEMU_SYSTEM_ARGS="-M virtex-ml507 -kernel output/images/vmlinux -m 256 -append 'console=ttyS0' -display none -nographic -dtb output/images/virtex440-ml507.dtb"
Signature · 1 line
2.0.4
PATCH 19/19 qemu/ppc64-pseries: update to the latest versions
In reply to Gustavo ZacariasSigned-off-by Gustavo Zacarias <[email protected]>
---
board/qemu/{powerpc64-pseries => ppc64-pseries}/readme.txt | 0
configs/qemu_ppc64_pseries_defconfig | 8 ++++----
2 files changed, 4 insertions(+), 4 deletions(-)
rename board/qemu/{powerpc64-pseries => ppc64-pseries}/readme.txt (100%)board/qemu/ppc64-pseries/readme.txt renamed from board/qemu/powerpc64-pseries/readme.txt +0 -0
configs/qemu_ppc64_pseries_defconfig +4 -4
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.16 headers to avoid breaking with newer kernels +# Lock to 3.17 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.16.3" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_16=y +BR2_DEFAULT_KERNEL_VERSION="3.17" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_17=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.16.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.17" BR2_LINUX_KERNEL_DEFCONFIG="pseries" BR2_LINUX_KERNEL_VMLINUX=y
Signature · 1 line
2.0.4
cover Qemu sample configuration bumps
In reply to Gustavo ZacariasQuoted 33 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
This patch series updates the kernel and candidate qemu versions to the latest possible versions.
The relevant kernel configurations are updated to switch from ext2 to ext4 since it covers more use cases.
ext* support was removed for platforms that are very unlikely to boot/use that kind of filesystem (microblaze).Status matrix:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------aarch64_virt 3.17 2.1.2 YES OK arm_nuri 3.10.56 2.1.2 YES(1) OK most times(2) arm_versatile 3.17 2.1.2 YES OK arm_vexpress 3.17 2.1.2 YES OK microblazebe 3.17 2.1.2 YES OK microblazeel 3.17 2.1.2 YES OK mips64el_malta 3.17 2.1.2 YES OK mips64_malta 3.17 2.1.2 YES OK mipsel_malta 3.17 2.1.2 YES OK mips_malta 3.17 2.1.2 YES OK ppc_g3beige 3.17 2.1.2 YES OK ppc_mpc8544ds 3.17 2.0.2 YES OK(3) ppc_virtex_ml507 3.17 2.1.2 NO OK ppc64_pseries 3.17 2.1.2 YES OK sh4 3.17 2.1.2 YES OK sparc_ss10 3.17 2.1.2 YES OK x86 3.17 2.1.2 YES OK x86_64 3.17 2.1.2 YES OK xtensa_lx60 3.17 2.1.2 YES OK
Quoted 3 lines
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 starts it fails to work properly
(3) - Qemu 2.1.x doesn't show up anything (broken)
Committed series, thanks!
Signature · 1 line
Bye, Peter Korsgaard