Skip to contentSkip to conversation

ARC port

PATCH New Mischa Jonker 3 participants 27 messages May 2, 2013 – May 7, 2013 Kbuild

lore
Share & tools
lore
#0 lore raw

v4 cover ARC port

Hi all,

Accidentally the first patch of the series was missing in v3 (wrong usage of git format-patch command on my side...). So this is a resend of v3, but now with an extra patch!

The patch set is also published on our github site:
https://github.com/foss-for-synopsys-dwc-arc-processors/buildroot

Thanks, Mischa

Changes in v4:
* re-added missing bison/flex host dependencies patch for gcc

Changes in v3:
* removed GCC arch-dependency cleanup patch (should be discussed separately)
* 3.9-rc8-->3.9 kernel headers
* Added bison/flex host dependencies

Changes in v2:
* BR2_ARC_SITE hardcoded now, and moved to Config.in.arc
* makeinfo dependency removed from binutils
* Added 3.9-rc8 kernel headers
* Patches split where suggested
* Removed ARC-specific uClibc config
* Moved ARC-specific binutils out of the choice menu
* Introduced explicit BR2_arcel, BR2_arceb symbols a la microblaze
* Added a patch that cleans up GCC architecture dependencies
* Fixed patches for binutils, gcc

Mischa Jonker (12):
toolchain/gcc: Add host-{flex,bison} dependencies for GCC 4.2,4.3,4.4
arc: Add ARC and ARC BE architecture
arc: Add option for ARC-specific download site
arc: Add support for ARC-specific binutils
arc: disable Crosstool-NG for ARC
arc: add gcc for ARC
arc: Add support for ARC-specific uClibc
arc: Make sure that libgcc doesn't get included when it doesn't exist
yet
toolchain/gcc: Only enable --with-float when it makes sense toolchain/toolchain-buildroot: Disable NPTL for ARC
arc: Add arc, arcbe to gnuconfig
kernel-headers: Add support for ARC kernel headers

 Makefile                                           |    1 +
 arch/Config.in                                     |   18 +++++
 arch/Config.in.arc                                 |   18 +++++
 .../binutils/2.19-arc/add-empty-info-files.patch   |   72 ++++++++++++++++++++
 package/binutils/Config.in.host                    |    2 +
 package/binutils/binutils.mk                       |    7 ++
 support/gnuconfig/config.sub                       |    4 +-
 toolchain/Config.in                                |    2 +-
 .../gcc/4.4.7-arc/fix_branch_out_of_range.patch    |   30 ++++++++
 toolchain/gcc/Config.in                            |   22 ++++--
 toolchain/gcc/gcc-uclibc-4.x.mk                    |   37 +++++++---
 toolchain/kernel-headers/Config.in                 |   14 +++--
 toolchain/toolchain-buildroot/Config.in.2          |    1 +
 toolchain/uClibc/Config.in                         |   10 ++-
 toolchain/uClibc/uClibc-snapshot.config            |    2 +
 toolchain/uClibc/uclibc.mk                         |   19 +++++-
 16 files changed, 227 insertions(+), 32 deletions(-)
 create mode 100644 arch/Config.in.arc
 create mode 100644 package/binutils/2.19-arc/add-empty-info-files.patch
 create mode 100644 toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch
#1 lore raw

PATCH v4 1/12 toolchain/gcc: Add host-{flex, bison} dependencies for GCC 4.2, 4.3, 4.4

Note that gcc doesn't use the package infrastructure, and needs proper $(HOST_MAKE_ENV) and $(TARGET_MAKE_ENV) to be able to find host-flex/ host-bison.

Original patch by Thomas Petazzoni.

---
 toolchain/gcc/gcc-uclibc-4.x.mk |   32 ++++++++++++++++++++------------
 1 files changed, 20 insertions(+), 12 deletions(-)
toolchain/gcc/gcc-uclibc-4.x.mk +20 -12
index fc11ad4..0a96211 100644
@@ -170,6 +170,14 @@ endif
 GCC_HOST_PREREQ += host-mpc
 endif
 
+ifneq ($(findstring x4.2.,x$(GCC_VERSION)),x4.2.)
+ifneq ($(findstring x4.3.,x$(GCC_VERSION)),x4.3.)
+ifneq ($(findstring x4.4.,x$(GCC_VERSION)),x4.4.)
+GCC_HOST_PREREQ = host-flex host-bison
+endif
+endif
+endif
+
 ifeq ($(BR2_GCC_SHARED_LIBGCC),y)
 GCC_SHARED_LIBGCC:=--enable-shared
 else
@@ -289,16 +297,16 @@ $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
 $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
 	$(Q)$(call MESSAGE,"Building gcc pass-1")
 ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y)
-	$(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc
+	$(GCC_CONF_ENV) $(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc
 else
-	$(MAKE) -C $(GCC_BUILD_DIR1) all-gcc
+	$(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc
 endif
 	touch $@
 
 gcc_initial=$(GCC_BUILD_DIR1)/.installed
 $(gcc_initial) $(HOST_DIR)/usr/bin/$(GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
 	$(Q)$(call MESSAGE,"Installing gcc pass-1")
-	PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) install-gcc
+	$(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) install-gcc
 	touch $(gcc_initial)
 
 gcc_initial: $(GCC_HOST_PREREQ) host-binutils $(HOST_DIR)/usr/bin/$(GNU_TARGET_NAME)-gcc
@@ -360,9 +368,9 @@ $(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
 	$(Q)$(call MESSAGE,"Building gcc pass-2")
 	# gcc >= 4.3.0 have to also build all-target-libgcc
 ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y)
-	$(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR2) all-gcc all-target-libgcc
+	$(GCC_CONF_ENV) $(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR2) all-gcc all-target-libgcc
 else
-	$(MAKE) -C $(GCC_BUILD_DIR2) all-gcc
+	$(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR2) all-gcc
 endif
 	touch $@
 
@@ -371,9 +379,9 @@ $(gcc_intermediate): $(GCC_BUILD_DIR2)/.compiled
 	$(Q)$(call MESSAGE,"Installing gcc pass-2")
 	# gcc >= 4.3.0 have to also install install-target-libgcc
 ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y)
-	PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) install-gcc install-target-libgcc
+	$(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR2) install-gcc install-target-libgcc
 else
-	PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) install-gcc
+	$(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR2) install-gcc
 endif
 	touch $(gcc_intermediate)
 
@@ -439,12 +447,12 @@ $(GCC_BUILD_DIR3)/.configured: $(GCC_SRC_DIR)/.patched $(GCC_STAGING_PREREQ)
 
 $(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
 	$(Q)$(call MESSAGE,"Building gcc final")
-	$(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR3) all
+	$(GCC_CONF_ENV) $(HOST_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR3) all
 	touch $@
 
 $(GCC_BUILD_DIR3)/.installed: $(GCC_BUILD_DIR3)/.compiled
 	$(Q)$(call MESSAGE,"Installing gcc final")
-	PATH=$(TARGET_PATH) $(MAKE) \
+	$(HOST_MAKE_ENV) $(MAKE) \
 		-C $(GCC_BUILD_DIR3) install
 	if [ -d "$(STAGING_DIR)/lib64" ]; then \
 		if [ ! -e "$(STAGING_DIR)/lib" ]; then \
@@ -572,8 +580,8 @@ $(GCC_BUILD_DIR4)/.configured: $(GCC_BUILD_DIR4)/.prepared
 
 $(GCC_BUILD_DIR4)/.compiled: $(GCC_BUILD_DIR4)/.configured
 	$(Q)$(call MESSAGE,"Building gcc on target")
-	PATH=$(TARGET_PATH) \
-	$(MAKE) -C $(GCC_BUILD_DIR4) all
+	$(TARGET_MAKE_ENV) \
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(GCC_BUILD_DIR4) all
 	touch $@
 
 GCC_LIB_SUBDIR=lib/gcc/$(GNU_TARGET_NAME)/$(GCC_VERSION)
@@ -585,7 +593,7 @@ endif
 
 $(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR4)/.compiled
 	$(Q)$(call MESSAGE,"Installing gcc on target")
-	PATH=$(TARGET_PATH) DESTDIR=$(TARGET_DIR) \
+	$(TARGET_MAKE_ENV) DESTDIR=$(TARGET_DIR) \
 		$(MAKE1) -C $(GCC_BUILD_DIR4) install
 	# Remove broken specs file (cross compile flag is set).
 	rm -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/specs
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH v4 1/12 toolchain/gcc: Add host-{flex, bison} dependencies for GCC 4.2, 4.3, 4.4

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> Note that gcc doesn't use the package infrastructure, and needs proper Mischa> $(HOST_MAKE_ENV) and $(TARGET_MAKE_ENV) to be able to find host-flex/ Mischa> host-bison.

Mischa> Original patch by Thomas Petazzoni.

Mischa> Signed-off-by: Mischa Jonker <[email protected]> Mischa> ---

 Mischa>  toolchain/gcc/gcc-uclibc-4.x.mk |   32 ++++++++++++++++++++------------

Mischa> 1 files changed, 20 insertions(+), 12 deletions(-)

Mischa> diff --git a/toolchain/gcc/gcc-uclibc-4.x.mk b/toolchain/gcc/gcc-uclibc-4.x.mk Mischa> index fc11ad4..0a96211 100644
Mischa> --- a/toolchain/gcc/gcc-uclibc-4.x.mk
Mischa> +++ b/toolchain/gcc/gcc-uclibc-4.x.mk
Mischa> @@ -170,6 +170,14 @@ endif
Mischa> GCC_HOST_PREREQ += host-mpc
Mischa> endif

Mischa> +ifneq ($(findstring x4.2.,x$(GCC_VERSION)),x4.2.) Mischa> +ifneq ($(findstring x4.3.,x$(GCC_VERSION)),x4.3.) Mischa> +ifneq ($(findstring x4.4.,x$(GCC_VERSION)),x4.4.) Mischa> +GCC_HOST_PREREQ = host-flex host-bison

Ehh, two things:

- This implements the opposite logic of what the commit message says (E.G. adds flex/bison if the version ISN'T 4.2/4.3/4.4)

- It overrides GCC_HOST_PREREQ instead of appending to it even though the line just above already appends something.

It isn't clear to me what the gcc version logic should be, and if it is somehow related to ARC - I don't recall any autobuilder failures regarding missing flex/bison.

Signature · 1 line
Bye, Peter Korsgaard
#3 lore raw

PATCH v4 1/12 toolchain/gcc: Add host-{flex, bison} dependencies for GCC 4.2, 4.3, 4.4

Dear Peter Korsgaard,

Quoted 5 lines · Peter Korsgaard

Mischa> +ifneq ($(findstring x4.2.,x$(GCC_VERSION)),x4.2.) Mischa> +ifneq ($(findstring x4.3.,x$(GCC_VERSION)),x4.3.) Mischa> +ifneq ($(findstring x4.4.,x$(GCC_VERSION)),x4.4.) Mischa> +GCC_HOST_PREREQ = host-flex host-bison

Quoted 7 lines

Ehh, two things:

- This implements the opposite logic of what the commit message says (E.G. adds flex/bison if the version ISN'T 4.2/4.3/4.4)

- It overrides GCC_HOST_PREREQ instead of appending to it even though the line just above already appends something.

Hum, right. Mischa, could you fix those and submit a patch? I've added a ARC configuration to the autobuilders, and it is now failing since Peter didn't commit this patch.

Quoted 3 lines

It isn't clear to me what the gcc version logic should be, and if it is somehow related to ARC - I don't recall any autobuilder failures regarding missing flex/bison.

The problem is that those old gcc versions require flex/bison to build properly. The issue was not seen on the autobuilders, because so far the only architectures that are using those old versions are AVR32 (4.2) and SPARC/Leon (4.4).

For AVR32, the autobuilder uses a an external toolchain which was built with a previous version of Buildroot, at a time where the autobuilder chroot had bison and flex installed system-wide.

For SPARC, there is no autobuilder configuration (maybe I should add one?).

So this bug already exists today, independently of the ARC support: I think that if you try to build the AVR32 internal toolchain on a system where bison and flex are not installed, the build is going to fail.

See
http://autobuild.buildroot.org/results/cc6c6f8036ee2a35c3eec36cf3f4338e76c19d68/build-end.log
for an autobuilder failure that exhibits the problem.

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#4 lore raw

PATCH v4 2/12 arc: Add ARC and ARC BE architecture

In reply to Mischa Jonker

Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs that can be used from deeply embedded to high performance host applications.

---
 arch/Config.in     |   18 ++++++++++++++++++
 arch/Config.in.arc |   14 ++++++++++++++
 2 files changed, 32 insertions(+), 0 deletions(-)
 create mode 100644 arch/Config.in.arc
arch/Config.in +18 -0
index 795f24f..2006f1e 100644
@@ -7,6 +7,20 @@ choice
 	help
 	  Select the target architecture family to build for.
 
+config BR2_arcle
+	bool "ARC (little endian)"
+	help
+	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
+	  that can be used from deeply embedded to high performance host
+	  applications. Little endian.
+
+config BR2_arceb
+	bool "ARC (big endian)"
+	help
+	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
+	  that can be used from deeply embedded to high performance host
+	  applications. Big endian.
+
 config BR2_arm
 	bool "ARM (little endian)"
 	help
@@ -175,6 +189,10 @@ config BR2_GCC_TARGET_ABI
 config BR2_GCC_TARGET_CPU
 	string
 
+if BR2_arcle || BR2_arceb
+source "arch/Config.in.arc"
+endif
+
 if BR2_arm || BR2_armeb
 source "arch/Config.in.arm"
 endif
arch/Config.in.arc new file +14 -0
new file mode 100644
index 0000000..60b59f0
@@ -0,0 +1,14 @@
+config BR2_ARCH
+	default "arc"	if BR2_arcle
+	default "arceb"	if BR2_arceb
+
+config BR2_arc
+	bool
+	default y if BR2_arcle || BR2_arceb
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_arcle
+	default "BIG"	 if BR2_arceb
+
+config BR2_GCC_TARGET_CPU
+	default "arc700"
Signature · 1 line
1.7.0.4
#5 lore raw

PATCH v4 2/12 arc: Add ARC and ARC BE architecture

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> Synopsys' DesignWare ARC Processor Cores are a family of 32-bit Mischa> CPUs that can be used from deeply embedded to high performance Mischa> host applications.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#6 lore raw

PATCH v4 3/12 arc: Add option for ARC-specific download site

In reply to Mischa Jonker

As ARC support is not yet in all upstream packages, a different location is required to download the packages from. This adds an option to specify a site for ARC-specific versions of packages such as binutils, gcc.

When ARC support has been upstreamed for all packages, this option can be removed again.

---
 arch/Config.in.arc |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
arch/Config.in.arc +4 -0
index 60b59f0..9f68b46 100644
@@ -12,3 +12,7 @@ config BR2_ENDIAN
 
 config BR2_GCC_TARGET_CPU
 	default "arc700"
+
+config BR2_ARC_SITE
+	string
+	default "http://www.synopsys.com/apps/arc-developer/"
Signature · 1 line
1.7.0.4
#7 lore raw

PATCH v4 3/12 arc: Add option for ARC-specific download site

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> As ARC support is not yet in all upstream packages, a different Mischa> location is required to download the packages from. This adds Mischa> an option to specify a site for ARC-specific versions of Mischa> packages such as binutils, gcc.

Mischa> When ARC support has been upstreamed for all packages, this Mischa> option can be removed again.

Mischa> Signed-off-by: Mischa Jonker <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#8 lore raw

PATCH v4 4/12 arc: Add support for ARC-specific binutils

In reply to Mischa Jonker

ARC support is not upstream yet...

package/binutils: add host-{flex,bison} dependencies for 2.19-arc

---
 .../binutils/2.19-arc/add-empty-info-files.patch   |   72 ++++++++++++++++++++
 package/binutils/Config.in.host                    |    2 +
 package/binutils/binutils.mk                       |    7 ++
 3 files changed, 81 insertions(+), 0 deletions(-)
 create mode 100644 package/binutils/2.19-arc/add-empty-info-files.patch
package/binutils/2.19-arc/add-empty-info-files.patch new file +72 -0
new file mode 100644
index 0000000..90de429
@@ -0,0 +1,72 @@
+binutils: add empty info files to remove makeinfo dependency
+
+Signed-off-by: Mischa jonker <[email protected]>
+---
+ bfd/doc/bfd.info           |    1 +
+ binutils/doc/binutils.info |    1 +
+ etc/configure.info         |    1 +
+ etc/standards.info         |    1 +
+ gas/doc/as.info            |    1 +
+ gprof/gprof.info           |    1 +
+ ld/ld.info                 |    1 +
+ 7 files changed, 7 insertions(+), 0 deletions(-)
+ create mode 100644 bfd/doc/bfd.info
+ create mode 100644 binutils/doc/binutils.info
+ create mode 100644 etc/configure.info
+ create mode 100644 etc/standards.info
+ create mode 100644 gas/doc/as.info
+ create mode 100644 gprof/gprof.info
+ create mode 100644 ld/ld.info
+
+diff --git a/bfd/doc/bfd.info b/bfd/doc/bfd.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/bfd/doc/bfd.info
+@@ -0,0 +1 @@
++
+diff --git a/binutils/doc/binutils.info b/binutils/doc/binutils.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/binutils/doc/binutils.info
+@@ -0,0 +1 @@
++
+diff --git a/etc/configure.info b/etc/configure.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/etc/configure.info
+@@ -0,0 +1 @@
++
+diff --git a/etc/standards.info b/etc/standards.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/etc/standards.info
+@@ -0,0 +1 @@
++
+diff --git a/gas/doc/as.info b/gas/doc/as.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/gas/doc/as.info
+@@ -0,0 +1 @@
++
+diff --git a/gprof/gprof.info b/gprof/gprof.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/gprof/gprof.info
+@@ -0,0 +1 @@
++
+diff --git a/ld/ld.info b/ld/ld.info
+new file mode 100644
+index 0000000..8b13789
+--- /dev/null
++++ b/ld/ld.info
+@@ -0,0 +1 @@
++
+-- 
+1.7.0.4
+
package/binutils/Config.in.host +2 -0
index a61a503..d9bab44 100644
@@ -2,6 +2,7 @@ comment "Binutils Options"
 
 choice
 	prompt "Binutils Version"
+	depends on !BR2_arc
 	default BR2_BINUTILS_VERSION_2_21 if (BR2_mips || BR2_mipsel || BR2_sh)
 	default BR2_BINUTILS_VERSION_2_21_1 if (!BR2_UCLIBC_VERSION_0_9_31)
 	default BR2_BINUTILS_VERSION_2_21
@@ -41,6 +42,7 @@ endchoice
 config BR2_BINUTILS_VERSION
 	string
 	default "2.18-avr32-1.0.1" if BR2_BINUTILS_VERSION_2_18_AVR32_1_0_1
+	default "2.19-arc"	if BR2_arc
 	default "2.20.1"	if BR2_BINUTILS_VERSION_2_20_1
 	default "2.21"		if BR2_BINUTILS_VERSION_2_21
 	default "2.21.1"	if BR2_BINUTILS_VERSION_2_21_1
package/binutils/binutils.mk +7 -0
index 92e0a74..081be6a 100644
@@ -26,6 +26,9 @@ BINUTILS_SITE = $(BR2_GNU_MIRROR)/binutils
 ifeq ($(ARCH),avr32)
 BINUTILS_SITE = ftp://www.at91.com/pub/buildroot
 endif
+ifeq ($(BR2_arc),y)
+BINUTILS_SITE = $(BR2_ARC_SITE)
+endif
 BINUTILS_EXTRA_CONFIG_OPTIONS = $(call qstrip,$(BR2_BINUTILS_EXTRA_CONFIG_OPTIONS))
 BINUTILS_INSTALL_STAGING = YES
 BINUTILS_DEPENDENCIES = $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext)
@@ -52,7 +55,11 @@ HOST_BINUTILS_CONF_OPT = --disable-multilib --disable-werror \
 			--with-sysroot=$(STAGING_DIR) \
 			$(BINUTILS_EXTRA_CONFIG_OPTIONS)
 
+ifeq ($(BINUTILS_VERSION),2.19-arc)
+HOST_BINUTILS_DEPENDENCIES = host-flex host-bison
+else
 HOST_BINUTILS_DEPENDENCIES =
+endif
 
 # We just want libbfd and libiberty, not the full-blown binutils in staging
 define BINUTILS_INSTALL_STAGING_CMDS
Signature · 1 line
1.7.0.4
#9 lore raw

PATCH v4 4/12 arc: Add support for ARC-specific binutils

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> ARC support is not upstream yet...

Mischa> package/binutils: add host-{flex,bison} dependencies for 2.19-arc

This line is a bit odd. Did you squash two commits and forgot to update the commit message?

Committed with this removed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#10 lore raw

PATCH v4 5/12 arc: disable Crosstool-NG for ARC

In reply to Mischa Jonker
---
 toolchain/Config.in |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
toolchain/Config.in +1 -1
index fa78cf4..e6a3b25 100644
@@ -22,7 +22,7 @@ config BR2_TOOLCHAIN_EXTERNAL
 
 config BR2_TOOLCHAIN_CTNG
 	bool "Crosstool-NG toolchain"
-	depends on !BR2_microblaze && !BR2_aarch64 && !BR2_xtensa
+	depends on !BR2_microblaze && !BR2_aarch64 && !BR2_xtensa && !BR2_arc
 	select BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS
 	help
 	  Say 'y' if you want to generate the toolchain with crosstool-NG
Signature · 1 line
1.7.0.4
#11 lore raw

PATCH v4 5/12 arc: disable Crosstool-NG for ARC

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> Signed-off-by: Mischa Jonker <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#12 lore raw

PATCH v4 6/12 arc: add gcc for ARC

In reply to Mischa Jonker

ARC needs a specific GCC for now, while we wait for ARC support to get upstreamed.

---
 .../gcc/4.4.7-arc/fix_branch_out_of_range.patch    |   30 ++++++++++++++++++++
 toolchain/gcc/Config.in                            |   22 +++++++++-----
 toolchain/gcc/gcc-uclibc-4.x.mk                    |    2 +
 3 files changed, 46 insertions(+), 8 deletions(-)
 create mode 100644 toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch
toolchain/gcc/4.4.7-arc/fix_branch_out_of_range.patch new file +30 -0
new file mode 100644
index 0000000..e39b1cc
@@ -0,0 +1,30 @@
+arc: Fix operand-out-of-range errors
+
+brcc_s instructions can generate operand-out-of-range errors. While a
+better solution is being discussed by the compiler team, this workaround
+ensures that the chances of running into this issue are low.
+
+Signed-off-by: Mischa Jonker <[email protected]>
+
+diff --git a/gcc/config/arc/arc.c b/gcc/config/arc/arc.c
+index ff602c0..b3ca4c4 100644
+--- a/gcc/config/arc/arc.c
++++ b/gcc/config/arc/arc.c
+@@ -6565,7 +6565,7 @@ estimate required size increase).
+ 	      rtx *ccp = &XEXP (XVECEXP (pat, 0, 1), 0);
+ 
+ 	      offset = branch_dest (insn) - INSN_ADDRESSES (INSN_UID (insn));
+-	      if ((offset >= -140 && offset < 140)
++	      if ((offset >= -120 && offset < 120)
+ 		  && rtx_equal_p (XEXP (op, 1), const0_rtx)
+  		  && compact_register_operand (XEXP (op, 0), VOIDmode)
+ 		  && equality_comparison_operator (op, VOIDmode))
+@@ -6687,7 +6687,7 @@ estimate required size increase).
+ 
+ 		  if (op0 != cmp0)
+  		    cc_clob_rtx = gen_rtx_REG (CC_ZNmode, CC_REG);
+- 		  else if ((offset >= -140 && offset < 140)
++ 		  else if ((offset >= -120 && offset < 120)
+ 			   && rtx_equal_p (op1, const0_rtx)
+ 			   && compact_register_operand (op0, VOIDmode)
+ 			   && (GET_CODE (op) == EQ
toolchain/gcc/Config.in +14 -8
index aae422c..f297e73 100644
@@ -9,44 +9,49 @@ choice
 	prompt "GCC compiler Version"
 	default BR2_GCC_VERSION_4_4_X if BR2_sparc_sparchfleon || BR2_sparc_sparchfleonv8 || BR2_sparc_sparcsfleon || BR2_sparc_sparcsfleonv8
 	default BR2_GCC_VERSION_4_2_2_AVR32_2_1_5 if BR2_avr32
+	default BR2_GCC_VERSION_4_4_7_ARC if BR2_arc
 	default BR2_GCC_VERSION_4_7_X
 	help
 	  Select the version of gcc you wish to use.
 
+	config BR2_GCC_VERSION_4_4_7_ARC
+		depends on BR2_arc
+		bool "gcc 4.4.7-arc"
+
 	config BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
 	       depends on BR2_avr32
 	       bool "gcc 4.2.2-avr32-2.1.5"
 
 	config BR2_GCC_VERSION_4_3_X
-		depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_cortex_a5 && !BR2_cortex_a8 && !BR2_cortex_a9 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_e300c2 && !BR2_powerpc_e300c3 && !BR2_powerpc_e500mc && !BR2_powerpc_464 && !BR2_powerpc_464fp && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
+		depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_cortex_a5 && !BR2_cortex_a8 && !BR2_cortex_a9 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_e300c2 && !BR2_powerpc_e300c3 && !BR2_powerpc_e500mc && !BR2_powerpc_464 && !BR2_powerpc_464fp && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
 		bool "gcc 4.3.x"
 
 	config BR2_GCC_VERSION_4_4_X
-		depends on !BR2_avr32 && !BR2_cortex_a5 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
+		depends on !BR2_arc && !BR2_avr32 && !BR2_cortex_a5 && !BR2_cortex_a15 && !BR2_x86_atom && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4
 		bool "gcc 4.4.x"
 
 	config BR2_GCC_VERSION_4_5_X
-		depends on !BR2_avr32 && !BR2_cortex_a15 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_fa526 && !BR2_pj4
+		depends on !BR2_arc && !BR2_avr32 && !BR2_cortex_a15 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_fa526 && !BR2_pj4
 		select BR2_GCC_NEEDS_MPC
 		bool "gcc 4.5.x"
 
 	config BR2_GCC_VERSION_4_6_X
-		depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
+		depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
 		select BR2_GCC_NEEDS_MPC
 		bool "gcc 4.6.x"
 
 	config BR2_GCC_VERSION_4_7_X
-		depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
+		depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4
 		select BR2_GCC_NEEDS_MPC
 		bool "gcc 4.7.x"
 
 	config BR2_GCC_VERSION_4_8_X
-		depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
+		depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
 		select BR2_GCC_NEEDS_MPC
 		bool "gcc 4.8.x"
 
 	config BR2_GCC_VERSION_SNAP
-		depends on !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
+		depends on !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8
 		select BR2_GCC_NEEDS_MPC
 		bool "gcc snapshot"
 endchoice
@@ -74,6 +79,7 @@ config BR2_GCC_VERSION
 	default "4.2.2-avr32-2.1.5" if BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
 	default "4.3.6"     if BR2_GCC_VERSION_4_3_X
 	default "4.4.7"     if BR2_GCC_VERSION_4_4_X
+	default "4.4.7-arc" if BR2_GCC_VERSION_4_4_7_ARC
 	default "4.5.4"     if BR2_GCC_VERSION_4_5_X
 	default "4.6.4"     if BR2_GCC_VERSION_4_6_X
 	default "4.7.3"     if BR2_GCC_VERSION_4_7_X
@@ -119,6 +125,6 @@ config BR2_GCC_ENABLE_TLS
 
 config BR2_GCC_ENABLE_OPENMP
 	bool "Enable compiler OpenMP support"
-	depends on !BR2_PTHREADS_NONE && !BR2_avr32
+	depends on !BR2_PTHREADS_NONE && !BR2_avr32 && !BR2_arc
 	help
 	  Enable OpenMP support for the compiler
toolchain/gcc/gcc-uclibc-4.x.mk +2 -0
index 0a96211..2993697 100644
@@ -29,6 +29,8 @@ ifneq ($(GCC_SNAP_DATE),)
  GCC_SITE:=ftp://gcc.gnu.org/pub/gcc/snapshots/$(GCC_SNAP_DATE)/
 else ifeq ($(findstring avr32,$(GCC_VERSION)),avr32)
  GCC_SITE:=ftp://www.at91.com/pub/buildroot/
+else ifeq ($(findstring arc,$(GCC_VERSION)),arc)
+ GCC_SITE:=$(BR2_ARC_SITE)
 else
  GCC_SITE:=$(BR2_GNU_MIRROR:/=)/gcc/gcc-$(GCC_VERSION)
 endif
Signature · 1 line
1.7.0.4
#13 lore raw

PATCH v4 6/12 arc: add gcc for ARC

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> ARC needs a specific GCC for now, while we wait for ARC support Mischa> to get upstreamed.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#14 lore raw

PATCH v4 7/12 arc: Add support for ARC-specific uClibc

In reply to Mischa Jonker
---
 toolchain/uClibc/Config.in              |   10 ++++++++--
 toolchain/uClibc/uClibc-snapshot.config |    2 ++
 toolchain/uClibc/uclibc.mk              |    4 ++++
 3 files changed, 14 insertions(+), 2 deletions(-)
toolchain/uClibc/Config.in +8 -2
index b98e2e8..316d006 100644
@@ -16,12 +16,16 @@ choice
 
 	config BR2_UCLIBC_VERSION_0_9_32
 		bool "uClibc 0.9.32.x"
-		depends on !(BR2_avr32 || BR2_sh || BR2_xtensa)
+		depends on !(BR2_arc || BR2_avr32 || BR2_sh || BR2_xtensa)
 
 	config BR2_UCLIBC_VERSION_0_9_33
 		bool "uClibc 0.9.33.x"
-		depends on !BR2_xtensa
+		depends on !(BR2_arc || BR2_xtensa)
 
+	config BR2_UCLIBC_VERSION_0_9_33_ARC
+		bool "uClibc 0.9.33.x-arc"
+		depends on BR2_arc
+	
 	config BR2_UCLIBC_VERSION_SNAPSHOT
 		bool "daily snapshot"
 
@@ -39,6 +43,7 @@ config BR2_UCLIBC_VERSION_STRING
 	default 0.9.31.1	if BR2_UCLIBC_VERSION_0_9_31
 	default 0.9.32.1	if BR2_UCLIBC_VERSION_0_9_32
 	default 0.9.33.2	if BR2_UCLIBC_VERSION_0_9_33
+	default 0.9.33-arc	if BR2_UCLIBC_VERSION_0_9_33_ARC
 	default $BR2_USE_UCLIBC_SNAPSHOT	if BR2_UCLIBC_VERSION_SNAPSHOT
 
 config BR2_UCLIBC_CONFIG
@@ -46,6 +51,7 @@ config BR2_UCLIBC_CONFIG
 	default "toolchain/uClibc/uClibc-0.9.31.config" if BR2_UCLIBC_VERSION_0_9_31
 	default "toolchain/uClibc/uClibc-0.9.32.config" if BR2_UCLIBC_VERSION_0_9_32
 	default "toolchain/uClibc/uClibc-0.9.33.config" if BR2_UCLIBC_VERSION_0_9_33
+	default "toolchain/uClibc/uClibc-snapshot.config" if BR2_UCLIBC_VERSION_0_9_33_ARC
 	default "toolchain/uClibc/uClibc-snapshot.config" if BR2_UCLIBC_VERSION_SNAPSHOT
 	help
 	  Some people may wish to use their own modified uClibc configuration
toolchain/uClibc/uClibc-snapshot.config +2 -0
index 71fa472..cb6258d 100644
@@ -4,6 +4,7 @@
 # Fri Jul  9 22:31:59 2010
 #
 # TARGET_alpha is not set
+# TARGET_arc is not set
 # TARGET_arm is not set
 # TARGET_avr32 is not set
 # TARGET_bfin is not set
@@ -16,6 +17,7 @@
 # TARGET_i960 is not set
 # TARGET_ia64 is not set
 # TARGET_m68k is not set
+# TARGET_metag is not set
 # TARGET_microblaze is not set
 # TARGET_mips is not set
 # TARGET_nios is not set
toolchain/uClibc/uclibc.mk +4 -0
index 2249651..1629e76 100644
@@ -17,6 +17,9 @@ UCLIBC_VERSION:=$(call qstrip,$(BR2_UCLIBC_VERSION_STRING))
 ifeq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y)
 UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots
 UCLIBC_DIR:=$(TOOLCHAIN_DIR)/uClibc
+else ifeq ($(findstring arc,$(UCLIBC_VERSION)),arc)
+UCLIBC_SITE:=$(BR2_ARC_SITE)
+UCLIBC_DIR:=$(TOOLCHAIN_DIR)/uClibc-$(UCLIBC_VERSION)
 else
 UCLIBC_SITE:=http://www.uclibc.org/downloads
 UCLIBC_DIR:=$(TOOLCHAIN_DIR)/uClibc-$(UCLIBC_VERSION)
@@ -31,6 +34,7 @@ UCLIBC_TARGET_ARCH:=$(shell $(SHELL) -c "echo $(ARCH) | sed \
 		-e 's/-.*//' \
 		-e 's/i.86/i386/' \
 		-e 's/sparc.*/sparc/' \
+		-e 's/arc.*/arc/g' \
 		-e 's/arm.*/arm/g' \
 		-e 's/m68k.*/m68k/' \
 		-e 's/ppc/powerpc/g' \
Signature · 1 line
1.7.0.4
#15 lore raw

PATCH v4 7/12 arc: Add support for ARC-specific uClibc

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> Signed-off-by: Mischa Jonker <[email protected]>

Mischa> ---

 Mischa>  toolchain/uClibc/Config.in              |   10 ++++++++--
 Mischa>  toolchain/uClibc/uClibc-snapshot.config |    2 ++
 Mischa>  toolchain/uClibc/uclibc.mk              |    4 ++++

Mischa> 3 files changed, 14 insertions(+), 2 deletions(-)

Mischa> diff --git a/toolchain/uClibc/Config.in b/toolchain/uClibc/Config.in Mischa> index b98e2e8..316d006 100644
Mischa> --- a/toolchain/uClibc/Config.in
Mischa> +++ b/toolchain/uClibc/Config.in
Mischa> @@ -16,12 +16,16 @@ choice

Mischa> config BR2_UCLIBC_VERSION_0_9_32
Mischa> bool "uClibc 0.9.32.x"
Mischa> - depends on !(BR2_avr32 || BR2_sh || BR2_xtensa)
Mischa> + depends on !(BR2_arc || BR2_avr32 || BR2_sh || BR2_xtensa)

Mischa> config BR2_UCLIBC_VERSION_0_9_33
Mischa> bool "uClibc 0.9.33.x"
Mischa> - depends on !BR2_xtensa
Mischa> + depends on !(BR2_arc || BR2_xtensa)

Mischa> + config BR2_UCLIBC_VERSION_0_9_33_ARC
Mischa> + bool "uClibc 0.9.33.x-arc"
Mischa> + depends on BR2_arc
Mischa> +

You're adding a bunch of trailing spaces here.

Committed with that fixed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#16 lore raw

PATCH v4 8/12 arc: Make sure that libgcc doesn't get included when it doesn't exist yet

In reply to Mischa Jonker

For ARC, libgcc is always included, even when -nostdlib is given. This is related to some small pieces of code that are not always generated by the compiler; a call to libgcc is used in those cases instead.

During the initial stages of building the toolchain, this is a problem, as libgcc does not exist yet. The ARC compiler supports -really-nostdlib to override the default behavior.

---
 toolchain/uClibc/uclibc.mk |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)
toolchain/uClibc/uclibc.mk +13 -2
index 1629e76..d4f1d4c 100644
@@ -404,6 +404,17 @@ ifeq ($(BR2_CCACHE),y)
 $(UCLIBC_DIR)/.config: | host-ccache
 endif
 
+# For ARC, libgcc is always included, even when -nostdlib is given. This
+# is related to some small pieces of code that are not always generated
+# by the compiler; a call to libgcc is used in those cases instead.
+#
+# During the initial stages of building the toolchain, this is a problem,
+# as libgcc does not exist yet. The ARC compiler supports -really-nostdlib
+# to override the default behavior.
+ifeq ($(BR2_arc),y)
+REALLY_NOSTDLIB=-really-nostdlib
+endif
+
 $(UCLIBC_DIR)/.configured: $(LINUX_HEADERS_DIR)/.configured $(UCLIBC_DIR)/.config
 	$(Q)$(call MESSAGE,"Installing uClibc headers")
 	$(MAKE1) -C $(UCLIBC_DIR) \
@@ -422,8 +433,8 @@ $(UCLIBC_DIR)/.configured: $(LINUX_HEADERS_DIR)/.configured $(UCLIBC_DIR)/.confi
 		cp -pLR $(LINUX_HEADERS_DIR)/include/* \
 			$(TOOLCHAIN_DIR)/uClibc_dev/usr/include/; \
 	fi
-	$(TARGET_CROSS)gcc -nostdlib -nostartfiles -shared -x c /dev/null -o $(TOOLCHAIN_DIR)/uClibc_dev/usr/lib/libc.so
-	$(TARGET_CROSS)gcc -nostdlib -nostartfiles -shared -x c /dev/null -o $(TOOLCHAIN_DIR)/uClibc_dev/usr/lib/libm.so
+	$(TARGET_CROSS)gcc -nostdlib $(REALLY_NOSTDLIB) -nostartfiles -shared -x c /dev/null -o $(TOOLCHAIN_DIR)/uClibc_dev/usr/lib/libc.so
+	$(TARGET_CROSS)gcc -nostdlib $(REALLY_NOSTDLIB) -nostartfiles -shared -x c /dev/null -o $(TOOLCHAIN_DIR)/uClibc_dev/usr/lib/libm.so
 	cp -pLR $(UCLIBC_DIR)/lib/crt[1in].o $(TOOLCHAIN_DIR)/uClibc_dev/usr/lib/
 	touch $@
 
Signature · 1 line
1.7.0.4
#17 lore raw

PATCH v4 8/12 arc: Make sure that libgcc doesn't get included when it doesn't exist yet

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> For ARC, libgcc is always included, even when -nostdlib is Mischa> given. This is related to some small pieces of code that are Mischa> not always generated by the compiler; a call to libgcc is used Mischa> in those cases instead.

Mischa> During the initial stages of building the toolchain, this is a Mischa> problem, as libgcc does not exist yet. The ARC compiler Mischa> supports -really-nostdlib to override the default behavior.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#18 lore raw

PATCH v4 9/12 toolchain/gcc: Only enable --with-float when it makes sense

In reply to Mischa Jonker

According to gcc/config.gcc, only ARM, MIPS and SPARC have the "--with-float" option when configuring gcc.

---
 toolchain/gcc/gcc-uclibc-4.x.mk |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
toolchain/gcc/gcc-uclibc-4.x.mk +3 -0
index 2993697..7b77fb0 100644
@@ -65,7 +65,10 @@ endif
 
 # Determine soft-float options
 ifeq ($(BR2_SOFT_FLOAT),y)
+# only mips*-*-*, arm*-*-* and sparc*-*-* accept --with-float
+ifeq ($(BR2_arm)$(BR2_armeb)$(BR2_mips)$(BR2_mipsel)$(BR2_sparc)$(BR2_mips64)$(BR2_mips64el),y)
 SOFT_FLOAT_CONFIG_OPTION:=--with-float=soft
+endif
 ifeq ($(BR2_arm)$(BR2_armeb),y) # only set float-abi for arm
 TARGET_SOFT_FLOAT:=-mfloat-abi=soft
 else
Signature · 1 line
1.7.0.4
#19 lore raw

PATCH v4 9/12 toolchain/gcc: Only enable --with-float when it makes sense

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> According to gcc/config.gcc, only ARM, MIPS and SPARC have the Mischa> "--with-float" option when configuring gcc.

Mischa> Signed-off-by: Mischa Jonker <[email protected]> Mischa> ---

 Mischa>  toolchain/gcc/gcc-uclibc-4.x.mk |    3 +++

Mischa> 1 files changed, 3 insertions(+), 0 deletions(-)

Mischa> diff --git a/toolchain/gcc/gcc-uclibc-4.x.mk b/toolchain/gcc/gcc-uclibc-4.x.mk Mischa> index 2993697..7b77fb0 100644
Mischa> --- a/toolchain/gcc/gcc-uclibc-4.x.mk
Mischa> +++ b/toolchain/gcc/gcc-uclibc-4.x.mk
Mischa> @@ -65,7 +65,10 @@ endif

Mischa> # Determine soft-float options
Mischa> ifeq ($(BR2_SOFT_FLOAT),y)
Mischa> +# only mips*-*-*, arm*-*-* and sparc*-*-* accept --with-float
Mischa> +ifeq ($(BR2_arm)$(BR2_armeb)$(BR2_mips)$(BR2_mipsel)$(BR2_sparc)$(BR2_mips64)$(BR2_mips64el),y)

sparc should come after all the mips* options. Committed with that fixed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#20 lore raw

PATCH v4 10/12 toolchain/toolchain-buildroot: Disable NPTL for ARC

In reply to Mischa Jonker

NPTL is not yet supported for ARC.

---
 toolchain/toolchain-buildroot/Config.in.2 |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
toolchain/toolchain-buildroot/Config.in.2 +1 -0
index 7f19b09..35d6db2 100644
@@ -97,6 +97,7 @@ choice
 		depends on !BR2_x86_i386
 		depends on !BR2_avr32
 		depends on !BR2_xtensa
+		depends on !BR2_arc
 endchoice
 
 config BR2_PTHREAD_DEBUG
Signature · 1 line
1.7.0.4
#21 lore raw

PATCH v4 10/12 toolchain/toolchain-buildroot: Disable NPTL for ARC

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> NPTL is not yet supported for ARC.

Mischa> Signed-off-by: Mischa Jonker <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#22 lore raw

PATCH v4 11/12 arc: Add arc, arcbe to gnuconfig

In reply to Mischa Jonker
---
 support/gnuconfig/config.sub |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
support/gnuconfig/config.sub +2 -2
index 8509813..b2958ad 100755
@@ -259,7 +259,7 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc \
+	| arc | arceb \
 	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
 	| avr | avr32 \
 	| be32 | be64 \
@@ -372,7 +372,7 @@ case $basic_machine in
 	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
 	| be32-* | be64-* \
Signature · 1 line
1.7.0.4
#23 lore raw

PATCH v4 11/12 arc: Add arc, arcbe to gnuconfig

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> Signed-off-by: Mischa Jonker <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#24 lore raw

PATCH v4 12/12 kernel-headers: Add support for ARC kernel headers

In reply to Mischa Jonker

Also make sure that older kernels are not selected for ARC.

---
 Makefile                           |    1 +
 toolchain/kernel-headers/Config.in |   14 +++++++++-----
 2 files changed, 10 insertions(+), 5 deletions(-)
Makefile +1 -0
index 97804ff..ce7530f 100644
@@ -238,6 +238,7 @@ ARCH:=$(call qstrip,$(BR2_ARCH))
 
 KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/i.86/i386/ -e s/sun4u/sparc64/ \
+	-e s/arc.*/arc/ \
 	-e s/arm.*/arm/ -e s/sa110/arm/ \
 	-e s/aarch64/arm64/ \
 	-e s/bfin/blackfin/ \
toolchain/kernel-headers/Config.in +9 -5
index 12c53d8..aff69d9 100644
@@ -17,35 +17,39 @@ choice
 
 	config BR2_KERNEL_HEADERS_3_0
 		bool "Linux 3.0.x kernel headers"
+		depends on !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_1
 		bool "Linux 3.1.x kernel headers"
-		depends on BR2_DEPRECATED
+		depends on BR2_DEPRECATED && !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_2
 		bool "Linux 3.2.x kernel headers"
+		depends on !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_3
 		bool "Linux 3.3.x kernel headers"
-		depends on BR2_DEPRECATED
+		depends on BR2_DEPRECATED && !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_4
 		bool "Linux 3.4.x kernel headers"
+		depends on !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_5
 		bool "Linux 3.5.x kernel headers"
-		depends on BR2_DEPRECATED
+		depends on BR2_DEPRECATED && !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_6
 		bool "Linux 3.6.x kernel headers"
-		depends on BR2_DEPRECATED
+		depends on BR2_DEPRECATED && !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_7
 		bool "Linux 3.7.x kernel headers"
-		depends on BR2_DEPRECATED
+		depends on BR2_DEPRECATED && !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_8
 		bool "Linux 3.8.x kernel headers"
+		depends on !BR2_arc
 
 	config BR2_KERNEL_HEADERS_3_9
 		bool "Linux 3.9.x kernel headers"
Signature · 1 line
1.7.0.4
#25 lore raw

PATCH v4 12/12 kernel-headers: Add support for ARC kernel headers

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Mischa" == Mischa Jonker <[email protected]> writes:

Mischa> Also make sure that older kernels are not selected for ARC.

Mischa> Signed-off-by: Mischa Jonker <[email protected]>

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#26 lore raw

v4 cover ARC port

In reply to Mischa Jonker

Dear Mischa Jonker,

Quoted 8 lines · Mischa Jonker

Accidentally the first patch of the series was missing in v3 (wrong usage of git format-patch command on my side...). So this is a resend of v3, but now with an extra patch!

The patch set is also published on our github site:
https://github.com/foss-for-synopsys-dwc-arc-processors/buildroot

Thanks, Mischa

This all looks good to me. Peter, can you pull/apply the 12 patches from Mischa so that we get this in -rc1 ?

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com