Skip to contentSkip to conversation

2.6.12 breaks 8139cp

DISCUSSION Nick Warne 3 participants 4 messages Jun 26, 2005 – Jun 27, 2005

lore
Share & tools
lore

Nick Warne

author
#0 lore raw
Quoted 6 lines

It seems that whatever is causing the bug i'm seeing was a change that involved the network driver/interrupt subsystem and not actually the
8139too driver, this was done at around 2.6.3-2.6.4. A NAPI patch that
was introduced at that time basically reverted the interrupt function and removed the poll functions from the driver (via not enabling napi in Kconfig).

Ummm. I was involved in this. Here is the 'final' post after Mr Hirofumi found the cause of my issues:

http://www.ussg.iu.edu/hypermail/linux/kernel/0402.3/1709.html

But I looked at what he said and found the real problem on my system (after all that):

http://www.ussg.iu.edu/hypermail/linux/kernel/0403.1/1537.html

Nick

Signature · 2 lines
"When you're chewing on life's gristle,
Don't grumble, Give a whistle..."
#1 lore raw

8139too PCI IRQ issues WAS Re: 2.6.12 breaks 8139cp

What are you supposed to do though if you dont have that bios option. And if the bios wasn't changed between kernel version upgrades, what is the PCI irq subsystem doing now that requires such a change? And what makes it possible to remove the problem with reverting just the 8139too driver ... There is a quirk here, but the fix should be in the kernel, since not all bios' allow you to make the fix yourself.

Quoted 15 lines · Nick Warne
Quoted 3 lines

It seems that whatever is causing the bug i'm seeing was a change that involved the network driver/interrupt subsystem and not actually the 8139too driver, this was done at around 2.6.3-2.6.4. A NAPI patch that was introduced at that time basically reverted the interrupt function and removed the poll functions from the driver (via not enabling napi in Kconfig).

Ummm. I was involved in this. Here is the 'final' post after Mr Hirofumi found the cause of my issues:

http://www.ussg.iu.edu/hypermail/linux/kernel/0402.3/1709.html

But I looked at what he said and found the real problem on my system (after all that):

http://www.ussg.iu.edu/hypermail/linux/kernel/0403.1/1537.html

Nick

author
#2 lore raw

Re: 8139too PCI IRQ issues WAS Re: 2.6.12 breaks 8139cp

Quoted 6 lines · you

What are you supposed to do though if you dont have that bios option. And if the bios wasn't changed between kernel version upgrades, what is the PCI irq subsystem doing now that requires such a change? And what makes it possible to remove the problem with reverting just the 8139too
driver ... There is a quirk here, but the fix should be in the kernel,
since not all bios' allow you to make the fix yourself.

Well, I wasn't saying _this_ is the solution, I was just pointing out the threads involved from last year for reference during this issue.

Nick

Signature · 2 lines
"When you're chewing on life's gristle,
Don't grumble, Give a whistle..."
#3 lore raw

Re: 8139too PCI IRQ issues WAS Re: 2.6.12 breaks 8139cp

In reply to Ed Sweetman
Quoted 6 lines · Ed Sweetman

What are you supposed to do though if you dont have that bios option. And if the bios wasn't changed between kernel version upgrades, what is the PCI irq subsystem doing now that requires such a change? And what makes it possible to remove the problem with reverting just the
8139too driver ... There is a quirk here, but the fix should be in
the kernel, since not all bios' allow you to make the fix yourself.

Can you post the detail? (/proc/interrupt, mptable, 8259A.pl, lspci -vvv)

Signature · 1 line
OGAWA Hirofumi <[email protected]>

#!/usr/bin/perl
#
# 8259A
#

use strict;
use warnings;

use Getopt::Std;

sub outb

{
    my $data = shift;
    my $port = shift;

    open(IO, "> /dev/port") || die;
    sysseek(IO, $port, 0) || die;
    my $x = pack("C", $data);
    syswrite(IO, $x, 1);
    close(IO);
}

sub inb

{
    my $port = shift;
    my $data;

    open(IO, "/dev/port") || die;
    sysseek(IO, $port, 0) || die;
    sysread(IO, $data, 1);
    close(IO);

    return unpack("C", $data);
}

sub set_edge_level

{
    my $irq = shift;
    my $to = shift;
    my $mask = 1 << ($irq & 7);
    my $port = 0x4d0 + ($irq >> 3);
    my $val = inb($port);

    if ($to eq "edge") {
	outb($val & ~$mask, $port);
    } else {
	outb($val | $mask, $port);
    }
    print "irq $irq: -> $to\n";
}

our($opt_e, $opt_l);
getopts('e:l:');

if ($opt_e and ($opt_e < 15)) {
    set_edge_level($opt_e, "edge");
} elsif ($opt_l and ($opt_l < 15)) {
    set_edge_level($opt_l, "level");
}
foreach my $irq (0..15) {
    my $mask = 1 << ($irq & 7);
    my $port = 0x4d0 + ($irq >> 3);
    my $val = inb($port);

    printf "irq %d: %02x, %s\n", $irq, $val, ($val & $mask) ? "level" : "edge";
}