Skip to contentSkip to conversation

ALSA: scarlett2: Scarlett 4th Gen fixes for 6.8

PATCH Applied Geoffrey D. Bennett 2 participants 8 messages Mar 10, 2024 – Mar 11, 2024

Subsystems (2)
lore
Share & tools
lore

Geoffrey D. Bennett

author maintainer
#0 lore raw

cover ALSA: scarlett2: Scarlett 4th Gen fixes for 6.8

Hi Takashi,

I have three minor fixes for the Scarlett 4th Gen driver in 6.8:
- The low-voltage indication is now being read from the correct offset
- The autogain status values are now all correctly interpreted
- The input gain range is now correct

Regards,
Geoffrey.

Geoffrey D. Bennett (3):
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range

 sound/usb/mixer_scarlett2.c | 85 ++++++++++++++++++++-----------------
 1 file changed, 46 insertions(+), 39 deletions(-)
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 1/3 ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection

The value currently being read to determine the low-voltage state is actually the front panel state. Fix the code to use the correct offset for the low-voltage state.

Fixes d7cfa2fdfc8a ("ALSA: scarlett2: Add power status control")
---
 sound/usb/mixer_scarlett2.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
sound/usb/mixer_scarlett2.c +7 -8
index 6de605a601e5..bce69a78c505 100644
@@ -415,7 +415,7 @@ enum {
 	SCARLETT2_CONFIG_INPUT_SELECT_SWITCH,
 	SCARLETT2_CONFIG_INPUT_LINK_SWITCH,
 	SCARLETT2_CONFIG_POWER_EXT,
-	SCARLETT2_CONFIG_POWER_STATUS,
+	SCARLETT2_CONFIG_POWER_LOW,
 	SCARLETT2_CONFIG_PCM_INPUT_SWITCH,
 	SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN,
 	SCARLETT2_CONFIG_COUNT
@@ -723,8 +723,8 @@ static const struct scarlett2_config_set scarlett2_config_set_gen4_4i4 = {
 		[SCARLETT2_CONFIG_POWER_EXT] = {
 			.offset = 0x168 },
 
-		[SCARLETT2_CONFIG_POWER_STATUS] = {
-			.offset = 0x66 }
+		[SCARLETT2_CONFIG_POWER_LOW] = {
+			.offset = 0x16d }
 	}
 };
 
@@ -6294,8 +6294,7 @@ static int scarlett2_update_power_status(struct usb_mixer_interface *mixer)
 {
 	struct scarlett2_data *private = mixer->private_data;
 	int err;
-	u8 power_ext;
-	u8 power_status;
+	u8 power_ext, power_low;
 
 	private->power_status_updated = 0;
 
@@ -6304,12 +6303,12 @@ static int scarlett2_update_power_status(struct usb_mixer_interface *mixer)
 	if (err < 0)
 		return err;
 
-	err = scarlett2_usb_get_config(mixer, SCARLETT2_CONFIG_POWER_STATUS,
-				       1, &power_status);
+	err = scarlett2_usb_get_config(mixer, SCARLETT2_CONFIG_POWER_LOW,
+				       1, &power_low);
 	if (err < 0)
 		return err;
 
-	if (power_status > 1)
+	if (power_low)
 		private->power_status = SCARLETT2_POWER_STATUS_FAIL;
 	else if (power_ext)
 		private->power_status = SCARLETT2_POWER_STATUS_EXT;
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 2/3 ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values

In reply to Geoffrey D. Bennett

The meanings of the raw_auto_gain_status values were originally guessed through experimentation, but the official names have now been discovered. Update the autogain status control strings accordingly.

Fixes 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain")
---
 sound/usb/mixer_scarlett2.c | 62 ++++++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 28 deletions(-)
sound/usb/mixer_scarlett2.c +34 -28
index bce69a78c505..3815ce1d216e 100644
@@ -284,14 +284,22 @@ static const char *const scarlett2_dim_mute_names[SCARLETT2_DIM_MUTE_COUNT] = {
 	"Mute Playback Switch", "Dim Playback Switch"
 };
 
-/* Autogain Status Values */
-enum {
-	SCARLETT2_AUTOGAIN_STATUS_STOPPED,
-	SCARLETT2_AUTOGAIN_STATUS_RUNNING,
-	SCARLETT2_AUTOGAIN_STATUS_FAILED,
-	SCARLETT2_AUTOGAIN_STATUS_CANCELLED,
-	SCARLETT2_AUTOGAIN_STATUS_UNKNOWN,
-	SCARLETT2_AUTOGAIN_STATUS_COUNT
+/* The autogain_status is set based on the autogain_switch and
+ * raw_autogain_status values.
+ *
+ * If autogain_switch is set, autogain_status is set to 0 (Running).
+ * The other status values are from the raw_autogain_status value + 1.
+ */
+static const char *const scarlett2_autogain_status_texts[] = {
+	"Running",
+	"Success",
+	"SuccessDRover",
+	"WarnMinGainLimit",
+	"FailDRunder",
+	"FailMaxGainLimit",
+	"FailClipped",
+	"Cancelled",
+	"Invalid"
 };
 
 /* Power Status Values */
@@ -2835,9 +2843,9 @@ static int scarlett2_autogain_is_running(struct scarlett2_data *private)
 {
 	int i;
 
+	/* autogain_status[] is 0 if autogain is running */
 	for (i = 0; i < private->info->gain_input_count; i++)
-		if (private->autogain_status[i] ==
-		    SCARLETT2_AUTOGAIN_STATUS_RUNNING)
+		if (!private->autogain_status[i])
 			return 1;
 
 	return 0;
@@ -2867,25 +2875,25 @@ static int scarlett2_update_autogain(struct usb_mixer_interface *mixer)
 		return err;
 
 	/* Translate autogain_switch and raw_autogain_status into
-	 * autogain_status
+	 * autogain_status.
+	 *
+	 * When autogain_switch[] is set, the status is the first
+	 * element in scarlett2_autogain_status_texts[] (Running). The
+	 * subsequent elements correspond to the status value from the
+	 * device (raw_autogain_status[]) + 1. The last element is
+	 * "Invalid", in case the device reports a status outside the
+	 * range of scarlett2_autogain_status_texts[].
 	 */
 	for (i = 0; i < info->gain_input_count; i++)
 		if (private->autogain_switch[i])
+			private->autogain_status[i] = 0;
+		else if (raw_autogain_status[i] <
+				ARRAY_SIZE(scarlett2_autogain_status_texts) - 1)
 			private->autogain_status[i] =
-				SCARLETT2_AUTOGAIN_STATUS_RUNNING;
-		else if (raw_autogain_status[i] == 0)
-			private->autogain_status[i] =
-				SCARLETT2_AUTOGAIN_STATUS_STOPPED;
-		else if (raw_autogain_status[i] >= 2 &&
-			 raw_autogain_status[i] <= 5)
-			private->autogain_status[i] =
-				SCARLETT2_AUTOGAIN_STATUS_FAILED;
-		else if (raw_autogain_status[i] == 6)
-			private->autogain_status[i] =
-				SCARLETT2_AUTOGAIN_STATUS_CANCELLED;
+				raw_autogain_status[i] + 1;
 		else
 			private->autogain_status[i] =
-				SCARLETT2_AUTOGAIN_STATUS_UNKNOWN;
+				ARRAY_SIZE(scarlett2_autogain_status_texts) - 1;
 
 	return 0;
 }
@@ -3111,12 +3119,10 @@ static int scarlett2_autogain_switch_ctl_put(
 static int scarlett2_autogain_status_ctl_info(
 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo)
 {
-	static const char *const values[SCARLETT2_AUTOGAIN_STATUS_COUNT] = {
-		"Stopped", "Running", "Failed", "Cancelled", "Unknown"
-	};
-
 	return snd_ctl_enum_info(
-		uinfo, 1, SCARLETT2_AUTOGAIN_STATUS_COUNT, values);
+		uinfo, 1,
+		ARRAY_SIZE(scarlett2_autogain_status_texts),
+		scarlett2_autogain_status_texts);
 }
 
 static const struct snd_kcontrol_new scarlett2_autogain_switch_ctl = {
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 3/3 ALSA: scarlett2: Fix Scarlett 4th Gen input gain range

In reply to Geoffrey D. Bennett

The input gain range TLV was declared as -70dB to 0dB, but the preamp gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to SCARLETT2_MAX_GAIN and update the TLV to fix.

Fixes 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain")
---
 sound/usb/mixer_scarlett2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
sound/usb/mixer_scarlett2.c +5 -3
index 3815ce1d216e..ffb8bcebf9ad 100644
@@ -173,7 +173,9 @@
 
 /* some gui mixers can't handle negative ctl values */
 #define SCARLETT2_VOLUME_BIAS 127
-#define SCARLETT2_GAIN_BIAS 70
+
+/* maximum preamp input gain */
+#define SCARLETT2_MAX_GAIN 70
 
 /* mixer range from -80dB to +6dB in 0.5dB steps */
 #define SCARLETT2_MIXER_MIN_DB -80
@@ -3464,7 +3466,7 @@ static int scarlett2_input_gain_ctl_info(struct snd_kcontrol *kctl,
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = elem->channels;
 	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = SCARLETT2_GAIN_BIAS;
+	uinfo->value.integer.max = SCARLETT2_MAX_GAIN;
 	uinfo->value.integer.step = 1;
 
 unlock:
@@ -3541,7 +3543,7 @@ static int scarlett2_input_gain_ctl_put(struct snd_kcontrol *kctl,
 }
 
 static const DECLARE_TLV_DB_MINMAX(
-	db_scale_scarlett2_gain, -SCARLETT2_GAIN_BIAS * 100, 0
+	db_scale_scarlett2_gain, 0, SCARLETT2_MAX_GAIN * 100
 );
 
 static const struct snd_kcontrol_new scarlett2_input_gain_ctl = {
Signature · 1 line
2.43.0
Applied
#4 lore raw
In reply to Geoffrey D. Bennett
Quoted 8 lines · Geoffrey D. Bennett

Hi Takashi,

I have three minor fixes for the Scarlett 4th Gen driver in 6.8:
- The low-voltage indication is now being read from the correct offset
- The autogain status values are now all correctly interpreted
- The input gain range is now correct

Quoted 7 lines

Regards,
Geoffrey.

Geoffrey D. Bennett (3):
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range

Applied all patches now. Thanks.

Takashi

author maintainer
#5 lore raw
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Geoffrey D. Bennett

Hi Takashi,

I have three minor fixes for the Scarlett 4th Gen driver in 6.8:
- The low-voltage indication is now being read from the correct offset
- The autogain status values are now all correctly interpreted
- The input gain range is now correct

Regards,
Geoffrey.

Quoted 6 lines
Quoted 4 lines

Geoffrey D. Bennett (3):
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range

Applied all patches now. Thanks.

Hi Takashi,

Sorry for the inconvience, I have a v2 of the 3rd patch "Fix Scarlett 4th Gen input gain range" which I will send in a moment. Please let me know if you prefer a patch on top of the above rather than a replacement patch.

Thanks,
Geoffrey.

#6 lore raw
Quoted 20 lines · Geoffrey D. Bennett
Quoted 18 lines · Takashi Iwai
Quoted 15 lines · Geoffrey D. Bennett

Hi Takashi,

I have three minor fixes for the Scarlett 4th Gen driver in 6.8:
- The low-voltage indication is now being read from the correct offset
- The autogain status values are now all correctly interpreted
- The input gain range is now correct

Regards,
Geoffrey.

Geoffrey D. Bennett (3):
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range

Quoted 8 lines
Quoted 1 line

Applied all patches now. Thanks.

Hi Takashi,

Sorry for the inconvience, I have a v2 of the 3rd patch "Fix Scarlett 4th Gen input gain range" which I will send in a moment. Please let me know if you prefer a patch on top of the above rather than a replacement patch.

Yes, please send an incremental fix.
You can get the commits in for-linus branch of sound.git tree.

thanks,

Takashi

author maintainer
#7 lore raw
Quoted 26 lines · Takashi Iwai
Quoted 24 lines · Geoffrey D. Bennett
Quoted 13 lines · Takashi Iwai
Quoted 11 lines · Geoffrey D. Bennett

Hi Takashi,

I have three minor fixes for the Scarlett 4th Gen driver in 6.8:
- The low-voltage indication is now being read from the correct offset
- The autogain status values are now all correctly interpreted
- The input gain range is now correct

Regards,
Geoffrey.

Quoted 6 lines
Quoted 4 lines

Geoffrey D. Bennett (3):
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range

Applied all patches now. Thanks.

Hi Takashi,

Quoted 7 lines
Quoted 4 lines

Sorry for the inconvience, I have a v2 of the 3rd patch "Fix Scarlett 4th Gen input gain range" which I will send in a moment. Please let me know if you prefer a patch on top of the above rather than a replacement patch.

Yes, please send an incremental fix.
You can get the commits in for-linus branch of sound.git tree.

Thanks for your patience. I have submitted an incremental fix, hopefully correct this time!