clk: mvebu: armada-38x: add support for missing clocks
Subsystems (2)
PATCH 1/1 clk: mvebu: armada-38x: add support for missing clocks
Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial).
They have also some dip-switches to select a different clock (666, 800, 1066, 1200).
The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot).
This patch add all the missing clocks.
The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
--- drivers/clk/mvebu/armada-38x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/clk/mvebu/armada-38x.c +7 -7
@@ -46,11 +46,11 @@ static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) }static const u32 armada_38x_cpu_frequencies[]__initconst = { -0 ,0 ,0 ,0 , -1066 *1000 *1000 ,0 ,0 ,0 , +666 *1000 *1000 ,0 ,800 *1000 *1000 ,0 , +1066 *1000 *1000 ,0 ,1200 *1000 *1000 ,0 ,1332 *1000 *1000 ,0 ,0 ,0 ,1600 *1000 *1000 ,0 ,0 ,0 , -1866 *1000 *1000 , +1866 *1000 *1000 ,0 ,0 ,2000 *1000 *1000 , };static u32 __init armada_38x_get_cpu_freq (void __iomem *sar)
@@ -76,11 +76,11 @@ static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = { };static const int armada_38x_cpu_l2_ratios[32 ][2 ]__initconst = { - {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 },
@@ -91,7 +91,7 @@ static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = { {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {7, 15}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1},
Gregory CLEMENT
maintainerHi Richard,
Quoted 5 lines · Richard Genoud
Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial).
They have also some dip-switches to select a different clock (666, 800, 1066, 1200).
The patch looks goo and it will also be usefull for any other board using these frequencies, thanks for this. I have only one small comment, see below.
Quoted 20 lines
The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot).
This patch add all the missing clocks.
The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
Signed-off-by Richard Genoud <[email protected]>--- drivers/clk/mvebu/armada-38x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)drivers/clk/mvebu/armada-38x.c +0
-0@@ -46,11 +46,11 @@ static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) }
drivers/clk/mvebu/armada-38x.c static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) · line 53
Quoted 10 lines
drivers/clk/mvebu/armada-38x.c +3
-3static const u32 armada_38x_cpu_frequencies[]__initconst = { -0 ,0 ,0 ,0 , -1066 *1000 *1000 ,0 ,0 ,0 , +666 *1000 *1000 ,0 ,800 *1000 *1000 ,0 , +1066 *1000 *1000 ,0 ,1200 *1000 *1000 ,0 ,1332 *1000 *1000 ,0 ,0 ,0 ,1600 *1000 *1000 ,0 ,0 ,0 , -1866 *1000 *1000 , +1866 *1000 *1000 ,0 ,0 ,2000 *1000 *1000 ,
Maybe you could add a comment here to say that the 2GHz mode didn't have been tested.
Thanks,
Gregory
Quoted 27 lines
drivers/clk/mvebu/armada-38x.c +4
-4};static u32 __init armada_38x_get_cpu_freq (void __iomem *sar)@@ -76,11 +76,11 @@ static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = { };static const int armada_38x_cpu_l2_ratios[32 ][2 ]__initconst = { - {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 },@@ -91,7 +91,7 @@ static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = { {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {7, 15}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1},
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
Hi,
Quoted 7 lines · Gregory CLEMENT
Hi Richard,
Quoted 3 lines · Richard Genoud
Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial).
Quoted 6 lines
Quoted 2 lines
They have also some dip-switches to select a different clock (666, 800, 1066, 1200).
The patch looks goo and it will also be usefull for any other board using these frequencies, thanks for this. I have only one small comment, see below.
I forgot to mention that you can add my
Thanks,
Gregory
Quoted 72 lines
Quoted 22 lines
The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot).
This patch add all the missing clocks.
The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
Signed-off-by Richard Genoud <[email protected]>--- drivers/clk/mvebu/armada-38x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)drivers/clk/mvebu/armada-38x.c +0
-0@@ -46,11 +46,11 @@ static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) }drivers/clk/mvebu/armada-38x.c static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) · line 53
Quoted 10 lines
drivers/clk/mvebu/armada-38x.c +3
-3static const u32 armada_38x_cpu_frequencies[]__initconst = { -0 ,0 ,0 ,0 , -1066 *1000 *1000 ,0 ,0 ,0 , +666 *1000 *1000 ,0 ,800 *1000 *1000 ,0 , +1066 *1000 *1000 ,0 ,1200 *1000 *1000 ,0 ,1332 *1000 *1000 ,0 ,0 ,0 ,1600 *1000 *1000 ,0 ,0 ,0 , -1866 *1000 *1000 , +1866 *1000 *1000 ,0 ,0 ,2000 *1000 *1000 ,Maybe you could add a comment here to say that the 2GHz mode didn't have been tested.
Thanks,
GregoryQuoted 27 lines
drivers/clk/mvebu/armada-38x.c +4
-4};static u32 __init armada_38x_get_cpu_freq (void __iomem *sar)@@ -76,11 +76,11 @@ static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = { };static const int armada_38x_cpu_l2_ratios[32 ][2 ]__initconst = { - {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 },@@ -91,7 +91,7 @@ static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = { {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {7, 15}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1},Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
Quoted 19 lines · Gregory CLEMENT
Hi,
Quoted 7 lines · Gregory CLEMENT
Hi Richard,
Quoted 3 lines · Richard Genoud
Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial).
Quoted 6 lines
Quoted 2 lines
They have also some dip-switches to select a different clock (666, 800, 1066, 1200).
The patch looks goo and it will also be usefull for any other board using these frequencies, thanks for this. I have only one small comment, see below.
Quoted 43 lines
I forgot to mention that you can add my
Acked-by Gregory CLEMENT <[email protected]>Thanks,
Gregory
Quoted 35 lines
Quoted 22 lines
The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot).
This patch add all the missing clocks.
The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
Signed-off-by Richard Genoud <[email protected]>--- drivers/clk/mvebu/armada-38x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)drivers/clk/mvebu/armada-38x.c +0
-0@@ -46,11 +46,11 @@ static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) }drivers/clk/mvebu/armada-38x.c static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) · line 53
Quoted 10 lines
drivers/clk/mvebu/armada-38x.c +3
-3static const u32 armada_38x_cpu_frequencies[]__initconst = { -0 ,0 ,0 ,0 , -1066 *1000 *1000 ,0 ,0 ,0 , +666 *1000 *1000 ,0 ,800 *1000 *1000 ,0 , +1066 *1000 *1000 ,0 ,1200 *1000 *1000 ,0 ,1332 *1000 *1000 ,0 ,0 ,0 ,1600 *1000 *1000 ,0 ,0 ,0 , -1866 *1000 *1000 , +1866 *1000 *1000 ,0 ,0 ,2000 *1000 *1000 ,Maybe you could add a comment here to say that the 2GHz mode didn't have been tested.
Well, if I add a comment there saying "2GHz mode hasn't been tested",
I'm afraid it will stay there forever, even after being tested.
(if it's working, nobody will look at it, and if it's not, it's in the commit message anyway).
I was also thinking that this could go in -stable since it fixes a hang.
In this case, commit 9593f4f56cf5 ("clk: mvebu: armada-38x: add support for 1866MHz variants") should also go with it.
Thanks !
Quoted 38 lines
Quoted 37 lines
Thanks,
GregoryQuoted 27 lines
drivers/clk/mvebu/armada-38x.c +4
-4};static u32 __init armada_38x_get_cpu_freq (void __iomem *sar)@@ -76,11 +76,11 @@ static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = { };static const int armada_38x_cpu_l2_ratios[32 ][2 ]__initconst = { - {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 },@@ -91,7 +91,7 @@ static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = { {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {7, 15}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1},Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
Gregory CLEMENT
maintainerHi Richard,
Quoted 63 lines · Richard Genoud
Quoted 19 lines · Gregory CLEMENT
Hi,
Quoted 7 lines · Gregory CLEMENT
Hi Richard,
Quoted 3 lines · Richard Genoud
Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial).
Quoted 6 lines
Quoted 2 lines
They have also some dip-switches to select a different clock (666, 800, 1066, 1200).
The patch looks goo and it will also be usefull for any other board using these frequencies, thanks for this. I have only one small comment, see below.
Quoted 43 lines
I forgot to mention that you can add my
Acked-by Gregory CLEMENT <[email protected]>Thanks,
Gregory
Quoted 35 lines
Quoted 22 lines
The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot).
This patch add all the missing clocks.
The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
Signed-off-by Richard Genoud <[email protected]>--- drivers/clk/mvebu/armada-38x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)drivers/clk/mvebu/armada-38x.c +0
-0@@ -46,11 +46,11 @@ static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) }drivers/clk/mvebu/armada-38x.c static u32 __init armada_38x_get_tclk_freq(void __iomem *sar) · line 53
Quoted 10 lines
drivers/clk/mvebu/armada-38x.c +3
-3static const u32 armada_38x_cpu_frequencies[]__initconst = { -0 ,0 ,0 ,0 , -1066 *1000 *1000 ,0 ,0 ,0 , +666 *1000 *1000 ,0 ,800 *1000 *1000 ,0 , +1066 *1000 *1000 ,0 ,1200 *1000 *1000 ,0 ,1332 *1000 *1000 ,0 ,0 ,0 ,1600 *1000 *1000 ,0 ,0 ,0 , -1866 *1000 *1000 , +1866 *1000 *1000 ,0 ,0 ,2000 *1000 *1000 ,Maybe you could add a comment here to say that the 2GHz mode didn't have been tested.
Quoted 4 lines
Well, if I add a comment there saying "2GHz mode hasn't been tested", I'm afraid it will stay there forever, even after being tested. (if it's working, nobody will look at it, and if it's not, it's in the commit message anyway).
OK fair enough.
Quoted 4 lines
I was also thinking that this could go in -stable since it fixes a hang.
In this case, commit9593f4f56cf5("clk: mvebu: armada-38x: add support for 1866MHz variants") should also go with it.
In this case you have to send a new version of your patch with the cc:
stabale and Fixes: tags.
Gregory
Quoted 44 lines
Thanks !
Quoted 38 lines
Quoted 37 lines
Thanks,
GregoryQuoted 27 lines
drivers/clk/mvebu/armada-38x.c +4
-4};static u32 __init armada_38x_get_cpu_freq (void __iomem *sar)@@ -76,11 +76,11 @@ static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = { };static const int armada_38x_cpu_l2_ratios[32 ][2 ]__initconst = { - {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, - {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, + {1 ,2 }, {0 ,1 }, {0 ,1 }, {1 ,2 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 }, {0 ,1 },@@ -91,7 +91,7 @@ static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = { {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, {1, 2}, {0, 1}, {0, 1}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {7, 15}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1},Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
Signature · 3 lines
Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com