ARM: dts: helios4: use national,lm75 compatible
Subsystems (2)
PATCH 1/1 ARM: dts: helios4: use national,lm75 compatible
The temp@4c node uses "ti,lm75", which no binding covers and which dtbs_check rejects:
temp@4c: failed to match any schema with compatible: ['ti,lm75']
The LM75 was originally a National Semiconductor part (now owned by TI) and the lm75 driver binds it via the matching "national,lm75" entry. Use the documented compatible; no functional change. The i2c name fallback ends up binding it.
--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/marvell/armada-388-helios4.dts +1 -1
@@ -200,7 +200,7 @@ usb3-ilimit-hog { }; temp_sensor: temp@4c { - compatible = "ti,lm75"; + compatible = "national,lm75"; reg = <0x4c>; vs-supply = <®_3p3v>; };
Signature · 1 line
2.55.0
Gregory CLEMENT
maintainerQuoted 5 lines · Rosen Penev
The temp@4c node uses "ti,lm75", which no binding covers and which
dtbs_checkrejects:temp@4c: failed to match any schema with compatible: ['ti,lm75']
Quoted 7 lines
The LM75 was originally a National Semiconductor part (now owned by TI) and the lm75 driver binds it via the matching "national,lm75" entry. Use the documented compatible; no functional change. The i2c name fallback ends up binding it.
Assisted-by opencode:big-pickleSigned-off-by Rosen Penev <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 20 lines
--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/marvell/armada-388-helios4.dts +1
-1@@ -200,7 +200,7 @@ usb3-ilimit-hog { }; temp_sensor: temp@4c { - compatible = "ti,lm75"; + compatible = "national,lm75"; reg = <0x4c>; vs-supply = <®_3p3v>; };Signature · 1 line
2.55.0
Signature · 3 lines
Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com