Fix linking gerbera with taglib
cover Fix linking gerbera with taglib
This series fixes linking gerbera with taglib.
The first commit adds an upstream patch to tagblib, which fixes taglib-config to output the correct paths when cross-compiling.
The second commit add an upstream patch to gerbera, which fixes the behaviour of find_program(taglib-config) when cross-compiling. By default, find_program() only searches on the host for binaries. However, in the case of taglib-config it should only search in the sysroot path for taglib-config.
Note, that the issue has been detected by the autobuilder for version 1.3.0 of gerbera (current version is 1.3.1), but it is still present.
Fixes:
http://autobuild.buildroot.org/results/e95/e9548f8d43abe3a2f2aab4acaa19289af2b9737d
http://autobuild.buildroot.org/results/efa/efa203e07c2dd5aed09c0ed23e3bd56fa2dadd2a
J?rg Krause (2):
package/taglib: add upstream patch to fix taglib-config package/gerbera: add upstream patch to fix find_program with
taglib-config
...m-taglib-config-when-cross-compiling.patch | 46 +++++++++++++ ...-config-file-for-cross-compiling-906.patch | 66 +++++++++++++++++++ 2 files changed, 112 insertions(+) create mode 100644 package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch create mode 100644 package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch
Signature · 1 line
2.22.0
PATCH 1/2 package/taglib: add upstream patch to fix taglib-config
The current taglib-config program does not work when cross-compiling as it only returns paths to the host, which breaks building programs which link against taglib.
For example gerbera uses taglib-config and it fails with:
``` [..] -- Found TagLib: -L/usr/lib -ltag [..] arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib' ```
Before the patch the output of taglib-config is:
``` $ ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs -L/usr/lib -ltag ```
Add a patch from upstream which fixes taglib-config.
After applying the fix, the pkg-config file is correct:
``` $ ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs -L/home/joerg/Development/git/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -ltag ```
--- ...-config-file-for-cross-compiling-906.patch | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch
package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch new file +66 -0
@@ -0,0 +1,66 @@ +From 7470f92a67375d00e53b3785a88fa7b26ad6f1da Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?J=C3=B6rg=20Krause?= <[email protected]> +Date: Fri, 17 May 2019 13:13:35 +0200 +Subject: [PATCH] fix taglib-config file for cross compiling (#906) +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The current taglib-config program does not work for cross-compiling as it only +returns the paths to the host, which breaks building programs which uses +`taglib-config` to link against taglib. + +Fix this by passing sysroot to the `prefix` and `exec_prefix` fields. + +Backported from: 7470f92a67375d00e53b3785a88fa7b26ad6f1da + +Signed-off-by: J?rg Krause <[email protected]> +--- + CMakeLists.txt | 2 +- + taglib-config.cmake | 10 +++++----- + 2 files changed, 6 insertions(+), 6 deletions(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 2de06324..1a0302c4 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -105,7 +105,7 @@ math(EXPR TAGLIB_SOVERSION_PATCH "${TAGLIB_SOVERSION_REVISION}") + include(ConfigureChecks.cmake) + + if(NOT WIN32) +- configure_file("${CMAKE_CURRENT_SOURCE_DIR}/taglib-config.cmake" "${CMAKE_CURRENT_BINARY_DIR}/taglib-config") ++ configure_file("${CMAKE_CURRENT_SOURCE_DIR}/taglib-config.cmake" "${CMAKE_CURRENT_BINARY_DIR}/taglib-config" @ONLY) + install(PROGRAMS "${CMAKE_CURRENT_BINARY_DIR}/taglib-config" DESTINATION "${BIN_INSTALL_DIR}") + endif() + +diff --git a/taglib-config.cmake b/taglib-config.cmake +index 2bc2811a..96ef6883 100644 +--- a/taglib-config.cmake ++++ b/taglib-config.cmake +@@ -14,10 +14,10 @@ EOH + exit 1; + } + +-prefix=${CMAKE_INSTALL_PREFIX} +-exec_prefix=${CMAKE_INSTALL_PREFIX} +-libdir=${LIB_INSTALL_DIR} +-includedir=${INCLUDE_INSTALL_DIR} ++prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@ ++exec_prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@ ++libdir=${exec_prefix}/lib ++includedir=${prefix}/include + + flags="" + +@@ -35,7 +35,7 @@ do + flags="$flags -I$includedir/taglib" + ;; + --version) +- echo ${TAGLIB_LIB_VERSION_STRING} ++ echo @TAGLIB_LIB_VERSION_STRING@ + ;; + --prefix) + echo $prefix +-- +2.22.0 +
Signature · 1 line
2.22.0
PATCH 1/2 package/taglib: add upstream patch to fix taglib-config
Quoted 6 lines · J?rg Krause
+-prefix=${CMAKE_INSTALL_PREFIX} +-exec_prefix=${CMAKE_INSTALL_PREFIX} +-libdir=${LIB_INSTALL_DIR} +-includedir=${INCLUDE_INSTALL_DIR}++prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@ ++exec_prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@
I believe it is wrong to include CMAKE_SYSROOT here. In general, this is not
necessarily the place where the package will be installed. We happen to do that now, but for example both OpenWrt and OpenEmbedded install with a different DESTDIR, and dependent packages see a different sysroot.
We have the TAGLIB_CONFIG_SCRIPT infra to handle this situation. It will add
the appropriate sysroot to the _prefix variables.
Regards,
Arnout
Quoted 2 lines
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
PATCH 1/2 package/taglib: add upstream patch to fix taglib-config
Hi Arnout,
thanks for your review!
Quoted 9 lines · Arnout Vandecappelle
Quoted 6 lines · J?rg Krause
+-prefix=${CMAKE_INSTALL_PREFIX} +-exec_prefix=${CMAKE_INSTALL_PREFIX} +-libdir=${LIB_INSTALL_DIR} +-includedir=${INCLUDE_INSTALL_DIR}++prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@ ++exec_prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@
Quoted 4 lines
I believe it is wrong to include
CMAKE_SYSROOThere. In general, this is not
necessarily the place where the package will be installed. We happen to do that now, but for example both OpenWrt and OpenEmbedded install with a different DESTDIR, and dependent packages see a different sysroot.
I see! The upstream patch was sent by me, so I will find a better solution.
Quoted 2 lines
We have the
TAGLIB_CONFIG_SCRIPTinfra to handle this situation. It will add
the appropriate sysroot to the_prefixvariables.
I've checked and used TAGLIB_CONFIG_SCRIPTS instead of applying the patch. The current sed commands to fix the package configuration file does not work for taglib-config:
``` # ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs -L/usr/lib -ltag ```
To get taglib-config work with our CONFIG_SCRIPTS, it needs to be fixed the way the patch does, just without using CMAKE_SYSROOT.
Best regards
J?rg Krause
PATCH 1/2 package/taglib: add upstream patch to fix taglib-config
Quoted 29 lines · J?rg Krause
Hi Arnout,
thanks for your review!
Quoted 9 lines · Arnout Vandecappelle
Quoted 6 lines · J?rg Krause
+-prefix=${CMAKE_INSTALL_PREFIX} +-exec_prefix=${CMAKE_INSTALL_PREFIX} +-libdir=${LIB_INSTALL_DIR} +-includedir=${INCLUDE_INSTALL_DIR}++prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@ ++exec_prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@
Quoted 4 lines
I believe it is wrong to include
CMAKE_SYSROOThere. In general, this is not
necessarily the place where the package will be installed. We happen to do that now, but for example both OpenWrt and OpenEmbedded install with a different DESTDIR, and dependent packages see a different sysroot.I see! The upstream patch was sent by me, so I will find a better solution.
Quoted 2 lines
We have the
TAGLIB_CONFIG_SCRIPTinfra to handle this situation. It will add
the appropriate sysroot to the_prefixvariables.I've checked and used
TAGLIB_CONFIG_SCRIPTSinstead of applying the patch. The current sed commands to fix the package configuration file does not work for taglib-config:
Quoted 7 lines
``` # ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs -L/usr/lib -ltag ```To get taglib-config work with our
CONFIG_SCRIPTS, it needs to be fixed the way the patch does, just without usingCMAKE_SYSROOT.
Yes, that was actually what I intended to say. Sorry for not being clearer.
Regards,
Arnout
PATCH 1/2 package/taglib: add upstream patch to fix taglib-config
In reply to Jörg KrauseQuoted 23 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"J?rg" == J?rg Krause <[email protected]> writes:
The current taglib-config program does not work when cross-compiling as it only returns paths to the host, which breaks building programs which link against taglib.
For example gerbera uses
taglib-configand it fails with:``` [..] -- Found TagLib: -L/usr/lib -ltag [..] arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib' ```Before the patch the output of
taglib-configis:``` $ ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs -L/usr/lib -ltag ```Add a patch from upstream which fixes taglib-config.
Quoted 7 lines
After applying the fix, the pkg-config file is correct:
``` $ ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs -L/home/joerg/Development/git/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -ltag ```Signed-off-by J?rg Krause <[email protected]>
Committed to 2019.02.x and 2019.05.x, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 2/2 package/gerbera: add upstream patch to fix find_program with taglib-config
In reply to Jörg KrauseAdd an from from upstream to fix linking Gerbera with taglib. The patch fixes the following issue:
When cross-compiling CMakes find_program() will search for binaries on the host. This is typically correct, e.g. when search for compilers or shells.
When cross-compiling, searching for taglib-config using find_program should not find the binary on the host, instead it should find the binary in the sysroot directory, as the host taglib-config will output the wrong host paths and libs, whereas the sysroot taglib-config will output the correct sysroot paths and libs.
Therefore, use the CMAKE_FIND_ROOT_PATH_MODE_PROGRAM variable when cross-compiling. This variable controls whether the CMAKE_FIND_ROOT_PATH and CMAKE_SYSROOT are used by find_program().
--- ...m-taglib-config-when-cross-compiling.patch | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch
package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch new file +46 -0
@@ -0,0 +1,46 @@ +From 0f78b883f02651bd15a96a7294e01f94b28c20f8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?J=C3=B6rg=20Krause?= <[email protected]> +Date: Mon, 13 May 2019 13:42:14 +0200 +Subject: [PATCH] Fix find_program taglib-config when cross-compiling +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +When cross-compiling Gerbera CMakes `find_program()` will search for +binaries on the host. This is typically correct, e.g. when search for +compilers or shells. + +When cross-compiling searching for `taglib-config` should not find the +binary on the host, instead it should find the binary in the sysroot +directory, as the host `taglib-config` will output the wrong host paths +and libs, whereas the sysroot `taglib-config` will output the correct sysroot +paths and libs. + +Therefore, use the `CMAKE_FIND_ROOT_PATH_MODE_PROGRAM` variable when +cross-compiling. This variable controls whether the `CMAKE_FIND_ROOT_PATH` +and `CMAKE_SYSROOT` are used by find_program(). + +Backported from: 0f78b883f02651bd15a96a7294e01f94b28c20f8 + +Signed-off-by: J?rg Krause <[email protected]> +--- + cmake/FindTaglib.cmake | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/cmake/FindTaglib.cmake b/cmake/FindTaglib.cmake +index 46a20ff2..7135d766 100644 +--- a/cmake/FindTaglib.cmake ++++ b/cmake/FindTaglib.cmake +@@ -19,6 +19,9 @@ ELSE() + endif(NOT TAGLIB_MIN_VERSION) + + if(NOT WIN32) ++ if (CMAKE_CROSSCOMPILING) ++ set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ONLY) ++ endif(CMAKE_CROSSCOMPILING) + find_program(TAGLIBCONFIG_EXECUTABLE NAMES taglib-config PATHS + ${BIN_INSTALL_DIR} + ) +-- +2.22.0 +
Signature · 1 line
2.22.0
PATCH 2/2 package/gerbera: add upstream patch to fix find_program with taglib-config
On 10/06/2019 23:20, J?rg Krause wrote:
[snip]
Quoted 2 lines
++ if (
CMAKE_CROSSCOMPILING)
++set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ONLY)
Again, this is wrong IMO. The executables in the sysroot are not supposed to be
executed on the host.
What we really should do is to copy those config scripts to some other
location, and add that to the PATH.
Besides, I think gerbera should be using the .pc file rather than the
taglib-config script.
Moreover, I think taglib should install a TaglibConfig.cmake file so CMake
packages like gerbera can pick that up directly rather than having to write a FindTaglib file.
Regards,
Arnout
Quoted 8 lines
++
endif(CMAKE_CROSSCOMPILING)package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch new file +6
-0+ find_program(TAGLIBCONFIG_EXECUTABLE NAMES taglib-config PATHS + ${BIN_INSTALL_DIR} + ) +-- +2.22.0 +
PATCH 2/2 package/gerbera: add upstream patch to fix find_program with taglib-config
Quoted 8 lines · On Tue, 11 Jun 2019 00:33:31 +0200 Arnout Vandecappelle <[email protected]> wrote:
Quoted 2 lines
++ if (
CMAKE_CROSSCOMPILING)
++set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ONLY)Again, this is wrong IMO. The executables in the sysroot are not supposed to be
executed on the host.What we really should do is to copy those config scripts to some other
location, and add that to the PATH.
Not so simple: what do you do to differentiate between foo-config describing foo for the host and foo-config describing foo for the target ?
Yes, you could install the foo-config in a different directory than $(HOST_DIR)/bin, but what if some package needs both foo-config for the host and foo-config for the target, when building its code for the target ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 2/2 package/gerbera: add upstream patch to fix find_program with taglib-config
In reply to Jörg KrauseQuoted 14 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"J?rg" == J?rg Krause <[email protected]> writes:
Add an from from upstream to fix linking Gerbera with taglib. The patch fixes the following issue:
When cross-compiling CMakes
find_program()will search for binaries on the host. This is typically correct, e.g. when search for compilers or shells.When cross-compiling, searching for
taglib-configusingfind_programshould not find the binary on the host, instead it should find the binary in the sysroot directory, as the hosttaglib-configwill output the wrong host paths and libs, whereas the sysroottaglib-configwill output the correct sysroot paths and libs.
Quoted 5 lines
Therefore, use the
CMAKE_FIND_ROOT_PATH_MODE_PROGRAMvariable when cross-compiling. This variable controls whether theCMAKE_FIND_ROOT_PATHandCMAKE_SYSROOTare used byfind_program().Signed-off-by J?rg Krause <[email protected]>
Committed to 2019.02.x and 2019.05.x, thanks.
Signature · 1 line
Bye, Peter Korsgaard
cover Fix linking gerbera with taglib
In reply to Jörg KrauseQuoted 10 lines · J?rg Krause
This series fixes linking gerbera with taglib.
The first commit adds an upstream patch to tagblib, which fixes
taglib-configto output the correct paths when cross-compiling.The second commit add an upstream patch to gerbera, which fixes the behaviour of
find_program(taglib-config)when cross-compiling. By default,find_program()only searches on the host for binaries. However, in the case oftaglib-configit should only search in the sysroot path fortaglib-config.
I think both patches are wrong/incomplete. Still, because they are upstream,
and they fix the issue, I've pushed to master, thanks.
I'll comment in the individual patches why I think they are wrong.
Regards,
Arnout
Quoted 19 lines
Note, that the issue has been detected by the autobuilder for version 1.3.0 of gerbera (current version is 1.3.1), but it is still present.
Fixes:
http://autobuild.buildroot.org/results/e95/e9548f8d43abe3a2f2aab4acaa19289af2b9737d
http://autobuild.buildroot.org/results/efa/efa203e07c2dd5aed09c0ed23e3bd56fa2dadd2aJ?rg Krause (2):
package/taglib: add upstream patch to fix taglib-config package/gerbera: add upstream patch to fixfind_programwith
taglib-config...m-taglib-config-when-cross-compiling.patch | 46 +++++++++++++ ...-config-file-for-cross-compiling-906.patch | 66 +++++++++++++++++++ 2 files changed, 112 insertions(+) create mode 100644 package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch create mode 100644 package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch