Skip to contentSkip to conversation

scsi: Devices offlined

DISCUSSION Wakko Warner 2 participants 3 messages Mar 21, 2007

lore
Share & tools
lore
#0 lore raw
[84797.683873] sr 1:0:13:0: scsi: Device offlined - not ready after error recovery

Is there anyway to make the kernel "online" a device that has done this? I've had this happen on various devices (mostly on usb where I can unplug/replug), but this time, it's on a scsi controller and the driver is not a module.

If it's possible to do this w/o rebooting, I'd like to know for when I have this happen in the future.

If it matters, the driver is aic79xx, kernel 2.6.20.

Signature · 2 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???
#1 lore raw
Quoted 9 lines · Wakko Warner
[84797.683873] sr 1:0:13:0: scsi: Device offlined - not ready after error recovery

Is there anyway to make the kernel "online" a device that has done this? I've had this happen on various devices (mostly on usb where I can unplug/replug), but this time, it's on a scsi controller and the driver is not a module.

If it's possible to do this w/o rebooting, I'd like to know for when I have this happen in the future.

Have you tried:

echo remove-single-device BUS ID LUN > /proc/scsi echo add-single-device BUS ID LUN > /proc/scsi

?

Phil.

#2 lore raw
Quoted 9 lines · Philippe Troin
Quoted 7 lines · Wakko Warner
[84797.683873] sr 1:0:13:0: scsi: Device offlined - not ready after error recovery

Is there anyway to make the kernel "online" a device that has done this? I've had this happen on various devices (mostly on usb where I can unplug/replug), but this time, it's on a scsi controller and the driver is not a module.

Quoted 7 lines
Quoted 2 lines

If it's possible to do this w/o rebooting, I'd like to know for when I have this happen in the future.

Have you tried:

echo remove-single-device BUS ID LUN > /proc/scsi echo add-single-device BUS ID LUN > /proc/scsi

I tried:
echo "scsi remove-scingle-device 1 0 13 0" > /proc/scsi/scsi <device removed from /proc/scsi/scsi list>
echo "scsi add-scingle-device 1 0 13 0" > /proc/scsi/scsi <device does not show up in /proc/scsi/scsi list>

I also tried your method, which just gives invalid argument (using /proc/scsi/scsi, since /proc/scsi is a directory)

According to scsi_proc.c:
/*
* Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi
* with "0 1 2 3" replaced by your "Host Channel Id Lun". */

/*
* Usage: echo "scsi remove-single-device 0 1 2 3" >/proc/scsi/scsi
* with "0 1 2 3" replaced by your "Host Channel Id Lun". */

Either way, nothing.

Er, on second though, I actually unplugged the power from the scsi device and replugged it and it shows up now. Oh well.. Thanks anyway =)

Signature · 2 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???